! Started logfile: .//J0532-2321_C_dfm.log on Sun Jan 19 23:59:13 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J0532-2321_C_uvm.fits
! Reading UV FITS file: .//J0532-2321_C_uvm.fits
! AN table 1: 17 integrations on 28 of 28 possible baselines.
! AN table 2: 17 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.955582 visibilities/baseline/integration-bin.
! Found source: J0532-2321
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 76 lines of history.
! 
! Reading 6368 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0532-2321_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 19 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.017722Jy  sigma=15.855716
! Fit after  self-cal, rms=0.828358Jy  sigma=12.754720
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.161 mas, bmaj=13.59 mas, bpa=-11.26 degrees
! Estimated noise=1.10299 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.12787 Jy
! Component: 100  -  total flux cleaned = 0.158405 Jy
! Total flux subtracted in 100 components = 0.158405 Jy
! Clean residual min=-0.007041 max=0.012761 Jy/beam
! Clean residual mean=0.000004 rms=0.002097 Jy/beam
! Combined flux in latest and established models = 0.158405 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.158405 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066362Jy  sigma=0.838273
! Fit after  self-cal, rms=0.066224Jy  sigma=0.837470
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014323 Jy
! Component: 100  -  total flux cleaned = 0.0225984 Jy
! Total flux subtracted in 100 components = 0.0225984 Jy
! Clean residual min=-0.004961 max=0.006224 Jy/beam
! Clean residual mean=0.000006 rms=0.001356 Jy/beam
! Combined flux in latest and established models = 0.181003 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 42 components and 0.181003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.061553Jy  sigma=0.726760
! Fit after  self-cal, rms=0.061529Jy  sigma=0.726027
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.856 mas, bmaj=14.05 mas, bpa=-11.92 degrees
! Estimated noise=0.608109 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101161 Jy
! Component: 100  -  total flux cleaned = 0.015895 Jy
! Component: 150  -  total flux cleaned = 0.019617 Jy
! Component: 200  -  total flux cleaned = 0.022167 Jy
! Total flux subtracted in 200 components = 0.022167 Jy
! Clean residual min=-0.002648 max=0.003458 Jy/beam
! Clean residual mean=-0.000006 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 0.20317 Jy
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 114 components and 0.20317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.060013Jy  sigma=0.686685
! Fit after  self-cal, rms=0.060003Jy  sigma=0.686339
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.856 x 14.05 at -11.92 degrees (North through East)
! Clean map  min=-0.0027256  max=0.17578 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.02     KP        1.01     
!   LA        0.93     NL        1.01     OV        1.00     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     HN        0.97     KP        0.99     
!   NL        1.02     OV        0.96     PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.07     KP        1.00     
!   LA        0.98     NL        1.00     OV        0.96     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        1.09     HN        1.04     KP        1.00     
!   NL        1.00     OV        0.96     PT        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.94     HN        1.00     KP        1.04     
!   LA        0.97     NL        1.01     OV        1.02     PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        1.06     HN        1.04     KP        1.01     
!   NL        1.06     OV        0.97     PT        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.10     KP        1.01     
!   LA        0.97     NL        0.94     OV        0.97     PT        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        0.95     HN        1.04     KP        0.97     
!   NL        0.96     OV        0.92     PT        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        3.28     FD        0.97     HN        1.09     KP        1.00     
!   LA        1.01     NL        0.99     OV        0.99     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.92     FD        0.95     HN        0.99     KP        0.96     
!   NL        1.04     OV        0.98     PT        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.05     KP        0.99     
!   LA        1.08     NL        1.02     OV        0.98     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.90     FD        0.97     HN        0.98     KP        0.96     
!   NL        1.04     OV        1.00     PT        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        1.03     KP        1.01     
!   LA        0.93     NL        0.99     OV        1.01     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.93     FD        0.99     HN        1.02     KP        0.99     
!   NL        0.96     OV        0.98     PT        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        0.98     KP        0.99     
!   LA        1.07     NL        1.02     OV        1.00     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.96     HN        0.97     KP        1.00     
!   NL        0.97     OV        0.95     PT        0.99     
! 
! 
! Fit before self-cal, rms=0.060003Jy  sigma=0.686339
! Fit after  self-cal, rms=0.068672Jy  sigma=0.660354
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.871 mas, bmaj=14.14 mas, bpa=-12.01 degrees
! Estimated noise=0.60506 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00031405 Jy
! Component: 100  -  total flux cleaned = -0.000350326 Jy
! Component: 150  -  total flux cleaned = -0.000364849 Jy
! Component: 200  -  total flux cleaned = -0.000353321 Jy
! Total flux subtracted in 200 components = -0.000353321 Jy
! Clean residual min=-0.001769 max=0.001798 Jy/beam
! Clean residual mean=-0.000000 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.202817 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 145 components and 0.202817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068664Jy  sigma=0.660179
! Fit after  self-cal, rms=0.068753Jy  sigma=0.660087
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068753Jy  sigma=0.660087
! Fit after  self-cal, rms=0.068963Jy  sigma=0.660064
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.873 mas, bmaj=14.15 mas, bpa=-12.02 degrees
! Estimated noise=0.604596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000337924 Jy
! Component: 100  -  total flux cleaned = -0.000405726 Jy
! Component: 150  -  total flux cleaned = -0.000395431 Jy
! Component: 200  -  total flux cleaned = -0.00037692 Jy
! Total flux subtracted in 200 components = -0.00037692 Jy
! Clean residual min=-0.001784 max=0.001766 Jy/beam
! Clean residual mean=-0.000001 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.20244 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 153 components and 0.20244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068958Jy  sigma=0.659970
! Fit after  self-cal, rms=0.068959Jy  sigma=0.659958
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.38666e-06 Jy
! Component: 100  -  total flux cleaned = -5.35138e-07 Jy
! Component: 150  -  total flux cleaned = 7.77499e-06 Jy
! Component: 200  -  total flux cleaned = 8.12672e-06 Jy
! Total flux subtracted in 200 components = 8.12672e-06 Jy
! Clean residual min=-0.001799 max=0.001753 Jy/beam
! Clean residual mean=-0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.202448 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 167 components and 0.202448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068957Jy  sigma=0.659909
! Fit after  self-cal, rms=0.068956Jy  sigma=0.659904
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068956Jy  sigma=0.659904
! Fit after  self-cal, rms=0.069020Jy  sigma=0.659876
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.875 mas, bmaj=14.15 mas, bpa=-12.03 degrees
! Estimated noise=0.604242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000355243 Jy
! Component: 100  -  total flux cleaned = -0.00039207 Jy
! Component: 150  -  total flux cleaned = -0.000384631 Jy
! Component: 200  -  total flux cleaned = -0.000377818 Jy
! Total flux subtracted in 200 components = -0.000377818 Jy
! Clean residual min=-0.001807 max=0.001731 Jy/beam
! Clean residual mean=-0.000001 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.20207 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 174 components and 0.20207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069017Jy  sigma=0.659833
! Fit after  self-cal, rms=0.069019Jy  sigma=0.659830
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.10524e-06 Jy
! Component: 100  -  total flux cleaned = -1.3694e-05 Jy
! Component: 150  -  total flux cleaned = -1.98794e-05 Jy
! Component: 200  -  total flux cleaned = -2.57189e-05 Jy
! Total flux subtracted in 200 components = -2.57189e-05 Jy
! Clean residual min=-0.001814 max=0.001723 Jy/beam
! Clean residual mean=-0.000001 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.202044 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 180 components and 0.202044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069018Jy  sigma=0.659806
! Fit after  self-cal, rms=0.069018Jy  sigma=0.659803
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069018Jy  sigma=0.659803
! Fit after  self-cal, rms=0.069093Jy  sigma=0.659783
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.255 mas, bmaj=13.64 mas, bpa=-12.8 degrees
! Estimated noise=0.637267 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000360333 Jy
! Component: 100  -  total flux cleaned = -0.000494571 Jy
! Component: 150  -  total flux cleaned = -0.000512792 Jy
! Component: 200  -  total flux cleaned = -0.000535184 Jy
! Total flux subtracted in 200 components = -0.000535184 Jy
! Clean residual min=-0.001477 max=0.001665 Jy/beam
! Clean residual mean=-0.000000 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.201509 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 196 components and 0.201509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069092Jy  sigma=0.659749
! Fit after  self-cal, rms=0.069093Jy  sigma=0.659742
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.70152e-05 Jy
! Component: 100  -  total flux cleaned = -4.19234e-05 Jy
! Component: 150  -  total flux cleaned = -5.19685e-05 Jy
! Component: 200  -  total flux cleaned = -6.18247e-05 Jy
! Total flux subtracted in 200 components = -6.18247e-05 Jy
! Clean residual min=-0.001472 max=0.001653 Jy/beam
! Clean residual mean=-0.000000 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.201447 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 202 components and 0.201447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069093Jy  sigma=0.659728
! Fit after  self-cal, rms=0.069092Jy  sigma=0.659727
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.877 mas, bmaj=14.16 mas, bpa=-12.04 degrees
! Estimated noise=0.603982 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.877 x 14.16 at -12.04 degrees (North through East)
! Clean map  min=-0.0017868  max=0.17463 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.174 mas, bmaj=13.72 mas, bpa=-11.44 degrees
! Estimated noise=1.10751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.128322 Jy
! Component: 100  -  total flux cleaned = 0.15865 Jy
! Component: 150  -  total flux cleaned = 0.172797 Jy
! Component: 200  -  total flux cleaned = 0.180692 Jy
! Total flux subtracted in 200 components = 0.180692 Jy
! Clean residual min=-0.003845 max=0.005019 Jy/beam
! Clean residual mean=0.000010 rms=0.001084 Jy/beam
! Combined flux in latest and established models = 0.180692 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.180692 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.877 mas, bmaj=14.16 mas, bpa=-12.04 degrees
! Estimated noise=0.603982 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0083399 Jy
! Component: 100  -  total flux cleaned = 0.0131036 Jy
! Component: 150  -  total flux cleaned = 0.0159579 Jy
! Component: 200  -  total flux cleaned = 0.0177527 Jy
! Total flux subtracted in 200 components = 0.0177527 Jy
! Clean residual min=-0.002049 max=0.001708 Jy/beam
! Clean residual mean=-0.000001 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.198444 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 91 components and 0.198444 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.255 mas, bmaj=13.64 mas, bpa=-12.8 degrees
! Estimated noise=0.637267 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135915 Jy
! Component: 100  -  total flux cleaned = 0.00212559 Jy
! Component: 150  -  total flux cleaned = 0.00258894 Jy
! Component: 200  -  total flux cleaned = 0.00287906 Jy
! Total flux subtracted in 200 components = 0.00287906 Jy
! Clean residual min=-0.001515 max=0.001621 Jy/beam
! Clean residual mean=-0.000000 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.201323 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.42553e-05 Jy
! Component: 100  -  total flux cleaned = 9.1764e-05 Jy
! Component: 150  -  total flux cleaned = 9.87201e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105321 Jy
! Total flux subtracted in 200 components = 0.000105321 Jy
! Clean residual min=-0.001506 max=0.001641 Jy/beam
! Clean residual mean=-0.000000 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.201429 Jy
! Adding 76 model components to the UV plane model.
! The established model now contains 159 components and 0.201429 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.877 mas, bmaj=14.16 mas, bpa=-12.04 degrees
! Estimated noise=0.603982 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114365 Jy
! Component: 100  -  total flux cleaned = 0.000149373 Jy
! Component: 150  -  total flux cleaned = 0.000170964 Jy
! Component: 200  -  total flux cleaned = 0.000190511 Jy
! Total flux subtracted in 200 components = 0.000190511 Jy
! Clean residual min=-0.001848 max=0.001722 Jy/beam
! Clean residual mean=-0.000001 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.201619 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 181 components and 0.201619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069107Jy  sigma=0.659712
! Fit after  self-cal, rms=0.069104Jy  sigma=0.659710
wmodel J0532-2321_C_map.mod
! Writing 181 model components to file: J0532-2321_C_map.mod
wobs   J0532-2321_C_uvs.fits
! Writing UV FITS file: J0532-2321_C_uvs.fits
wwins  J0532-2321_C_map.win
! wwins: Wrote 1 windows to J0532-2321_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.82314e-05 Jy
! Component: 100  -  total flux cleaned = 0.000263224 Jy
! Component: 150  -  total flux cleaned = 0.000507108 Jy
! Component: 200  -  total flux cleaned = 0.000689573 Jy
! Component: 250  -  total flux cleaned = 0.000907786 Jy
! Component: 300  -  total flux cleaned = 0.0011188 Jy
! Component: 350  -  total flux cleaned = 0.00124108 Jy
! Component: 400  -  total flux cleaned = 0.00139957 Jy
! Component: 450  -  total flux cleaned = 0.00149554 Jy
! Component: 500  -  total flux cleaned = 0.00151431 Jy
! Component: 550  -  total flux cleaned = 0.00156963 Jy
! Component: 600  -  total flux cleaned = 0.00167673 Jy
! Component: 650  -  total flux cleaned = 0.00167667 Jy
! Component: 700  -  total flux cleaned = 0.00172834 Jy
! Component: 750  -  total flux cleaned = 0.00181191 Jy
! Component: 800  -  total flux cleaned = 0.00184472 Jy
! Component: 850  -  total flux cleaned = 0.00192468 Jy
! Component: 900  -  total flux cleaned = 0.00192446 Jy
! Component: 950  -  total flux cleaned = 0.00198636 Jy
! Component: 1000  -  total flux cleaned = 0.00200152 Jy
! Component: 1050  -  total flux cleaned = 0.00204676 Jy
! Component: 1100  -  total flux cleaned = 0.00206158 Jy
! Component: 1150  -  total flux cleaned = 0.00209068 Jy
! Component: 1200  -  total flux cleaned = 0.00210488 Jy
! Component: 1250  -  total flux cleaned = 0.00214725 Jy
! Component: 1300  -  total flux cleaned = 0.00216124 Jy
! Component: 1350  -  total flux cleaned = 0.00214761 Jy
! Component: 1400  -  total flux cleaned = 0.00214787 Jy
! Component: 1450  -  total flux cleaned = 0.00214795 Jy
! Component: 1500  -  total flux cleaned = 0.00214796 Jy
! Component: 1550  -  total flux cleaned = 0.00214787 Jy
! Component: 1600  -  total flux cleaned = 0.00217393 Jy
! Component: 1650  -  total flux cleaned = 0.00212218 Jy
! Component: 1700  -  total flux cleaned = 0.00214782 Jy
! Component: 1750  -  total flux cleaned = 0.00213521 Jy
! Component: 1800  -  total flux cleaned = 0.00214774 Jy
! Component: 1850  -  total flux cleaned = 0.00213535 Jy
! Component: 1900  -  total flux cleaned = 0.00208634 Jy
! Component: 1950  -  total flux cleaned = 0.00213503 Jy
! Component: 2000  -  total flux cleaned = 0.00207455 Jy
! Component: 2050  -  total flux cleaned = 0.00205057 Jy
! Component: 2100  -  total flux cleaned = 0.00205058 Jy
! Component: 2150  -  total flux cleaned = 0.00205056 Jy
! Component: 2200  -  total flux cleaned = 0.00201567 Jy
! Component: 2250  -  total flux cleaned = 0.00206197 Jy
! Component: 2300  -  total flux cleaned = 0.00206177 Jy
! Component: 2350  -  total flux cleaned = 0.00206164 Jy
! Component: 2400  -  total flux cleaned = 0.00210654 Jy
! Component: 2450  -  total flux cleaned = 0.00210651 Jy
! Component: 2500  -  total flux cleaned = 0.00213967 Jy
! Component: 2550  -  total flux cleaned = 0.00212851 Jy
! Component: 2600  -  total flux cleaned = 0.00215036 Jy
! Component: 2650  -  total flux cleaned = 0.00216116 Jy
! Component: 2700  -  total flux cleaned = 0.00219358 Jy
! Component: 2750  -  total flux cleaned = 0.00224677 Jy
! Component: 2800  -  total flux cleaned = 0.00226796 Jy
! Component: 2850  -  total flux cleaned = 0.00227848 Jy
! Component: 2900  -  total flux cleaned = 0.00234111 Jy
! Component: 2950  -  total flux cleaned = 0.00234114 Jy
! Component: 3000  -  total flux cleaned = 0.002372 Jy
! Component: 3050  -  total flux cleaned = 0.00241279 Jy
! Component: 3100  -  total flux cleaned = 0.00243296 Jy
! Component: 3150  -  total flux cleaned = 0.00246317 Jy
! Component: 3200  -  total flux cleaned = 0.00252306 Jy
! Component: 3250  -  total flux cleaned = 0.00253307 Jy
! Component: 3300  -  total flux cleaned = 0.00257253 Jy
! Component: 3350  -  total flux cleaned = 0.00261164 Jy
! Component: 3400  -  total flux cleaned = 0.00266985 Jy
! Component: 3450  -  total flux cleaned = 0.00269879 Jy
! Component: 3500  -  total flux cleaned = 0.00273709 Jy
! Component: 3550  -  total flux cleaned = 0.00278461 Jy
! Component: 3600  -  total flux cleaned = 0.00278455 Jy
! Component: 3650  -  total flux cleaned = 0.00279396 Jy
! Component: 3700  -  total flux cleaned = 0.00285004 Jy
! Component: 3750  -  total flux cleaned = 0.00289636 Jy
! Component: 3800  -  total flux cleaned = 0.0028872 Jy
! Component: 3850  -  total flux cleaned = 0.00290554 Jy
! Component: 3900  -  total flux cleaned = 0.0029329 Jy
! Component: 3950  -  total flux cleaned = 0.00293298 Jy
! Component: 4000  -  total flux cleaned = 0.00297793 Jy
! Component: 4050  -  total flux cleaned = 0.00299576 Jy
! Total flux subtracted in 4096 components = 0.00301357 Jy
! Clean residual min=-0.000453 max=0.000486 Jy/beam
! Clean residual mean=-0.000001 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.204633 Jy
keep
! Adding 337 model components to the UV plane model.
! The established model now contains 518 components and 0.204633 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J0532-2321_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.877 x 14.16 at -12.04 degrees (North through East)
! Clean map  min=-0.0015713  max=0.17449 Jy/beam
! Writing clean map to FITS file: .//J0532-2321_C_map.fits
wmodel .//J0532-2321_C_map.mod
! Writing 518 model components to file: .//J0532-2321_C_map.mod
wobs   .//J0532-2321_C_uvs.fits
! Writing UV FITS file: .//J0532-2321_C_uvs.fits
wwins  .//J0532-2321_C_map.win
! wwins: Wrote 2 windows to .//J0532-2321_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.174495 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000184093 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.316502 0.316502 0.633003 1.26601 2.53201 5.06403 10.1281 20.2561 40.5122 81.0244
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.174 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  947.862 
quit
! Quitting program
! Log file .//J0532-2321_C_dfm.log closed on Sun Jan 19 23:59:17 2020