! Started logfile: .//J0323-2255_C_dfm.log on Sun Jan 19 23:53:59 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J0323-2255_C_uvm.fits
! Reading UV FITS file: .//J0323-2255_C_uvm.fits
! AN table 1: 17 integrations on 15 of 15 possible baselines.
! AN table 2: 17 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.934641 visibilities/baseline/integration-bin.
! Found source: J0323-2255
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 67 lines of history.
! 
! Reading 4576 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0323-2255_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 8 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.011812Jy  sigma=15.612261
! Fit after  self-cal, rms=0.933179Jy  sigma=14.378500
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.453 mas, bmaj=9.884 mas, bpa=-3.398 degrees
! Estimated noise=1.28293 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0520101 Jy
! Component: 100  -  total flux cleaned = 0.0639568 Jy
! Total flux subtracted in 100 components = 0.0639568 Jy
! Clean residual min=-0.005019 max=0.005741 Jy/beam
! Clean residual mean=-0.000001 rms=0.001350 Jy/beam
! Combined flux in latest and established models = 0.0639568 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0639568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053974Jy  sigma=0.660768
! Fit after  self-cal, rms=0.053630Jy  sigma=0.657242
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.997 mas, bmaj=10.63 mas, bpa=-2.253 degrees
! Estimated noise=0.785189 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.006247 Jy
! Component: 100  -  total flux cleaned = 0.00863443 Jy
! Component: 150  -  total flux cleaned = 0.00908909 Jy
! Component: 200  -  total flux cleaned = 0.00919829 Jy
! Total flux subtracted in 200 components = 0.00919829 Jy
! Clean residual min=-0.002350 max=0.002869 Jy/beam
! Clean residual mean=0.000004 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.0731551 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 37 components and 0.0731551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052990Jy  sigma=0.642713
! Fit after  self-cal, rms=0.053007Jy  sigma=0.642597
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.997 x 10.63 at -2.253 degrees (North through East)
! Clean map  min=-0.002246  max=0.069161 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    NL        0.00*    
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.98     HN        0.91     KP        0.93     
!   NL        1.03     OV        0.95     PT        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    NL        0.00*    
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.05     HN        1.14     KP        0.96     
!   NL        0.97     OV        0.95     PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    NL        0.00*    
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.04     HN        1.12     KP        1.00     
!   NL        1.14     OV        1.02     PT        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.89     HN        1.28     NL        0.92     
!   OV        0.95     PT        1.12     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        0.97     HN        1.18     KP        1.14     
!   NL        0.94     OV        0.93     PT        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.97     HN        1.03     NL        1.00     
!   OV        0.88     PT        0.89     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     FD        0.96     HN        1.03     KP        0.95     
!   NL        1.13     OV        0.97     PT        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        1.13     NL        0.96     
!   OV        0.90     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.06     HN        1.05     KP        0.90     
!   NL        1.08     OV        0.99     PT        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.10     HN        1.08     NL        0.93     
!   OV        0.89     PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        0.97     HN        1.20     KP        0.97     
!   NL        1.20     OV        0.99     PT        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        0.96     NL        0.92     
!   OV        1.02     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.01     HN        0.94     KP        0.98     
!   NL        1.11     OV        0.98     PT        1.07     
! 
! 
! Fit before self-cal, rms=0.053007Jy  sigma=0.642597
! Fit after  self-cal, rms=0.053366Jy  sigma=0.634235
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.041 mas, bmaj=10.6 mas, bpa=-2.272 degrees
! Estimated noise=0.777607 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000418975 Jy
! Component: 100  -  total flux cleaned = -0.000640787 Jy
! Component: 150  -  total flux cleaned = -0.000803035 Jy
! Component: 200  -  total flux cleaned = -0.000862413 Jy
! Total flux subtracted in 200 components = -0.000862413 Jy
! Clean residual min=-0.001878 max=0.002372 Jy/beam
! Clean residual mean=0.000006 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.0722927 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 55 components and 0.0722927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053334Jy  sigma=0.633870
! Fit after  self-cal, rms=0.053372Jy  sigma=0.633659
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053372Jy  sigma=0.633659
! Fit after  self-cal, rms=0.053218Jy  sigma=0.633572
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.05 mas, bmaj=10.62 mas, bpa=-2.242 degrees
! Estimated noise=0.773633 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000465495 Jy
! Component: 100  -  total flux cleaned = -0.000617758 Jy
! Component: 150  -  total flux cleaned = -0.000692067 Jy
! Component: 200  -  total flux cleaned = -0.000725085 Jy
! Total flux subtracted in 200 components = -0.000725085 Jy
! Clean residual min=-0.001782 max=0.002283 Jy/beam
! Clean residual mean=0.000005 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.0715676 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 66 components and 0.0715676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053198Jy  sigma=0.633356
! Fit after  self-cal, rms=0.053194Jy  sigma=0.633347
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (11.4, 46.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106437 Jy
! Component: 100  -  total flux cleaned = 0.00123955 Jy
! Component: 150  -  total flux cleaned = 0.00134663 Jy
! Component: 200  -  total flux cleaned = 0.00143675 Jy
! Total flux subtracted in 200 components = 0.00143675 Jy
! Clean residual min=-0.001701 max=0.001504 Jy/beam
! Clean residual mean=0.000005 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.0730044 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 89 components and 0.0730044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053080Jy  sigma=0.632001
! Fit after  self-cal, rms=0.053069Jy  sigma=0.631900
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053069Jy  sigma=0.631900
! Fit after  self-cal, rms=0.052803Jy  sigma=0.631768
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.055 mas, bmaj=10.64 mas, bpa=-2.223 degrees
! Estimated noise=0.7688 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000474707 Jy
! Component: 100  -  total flux cleaned = 0.000551187 Jy
! Component: 150  -  total flux cleaned = 0.000482749 Jy
! Component: 200  -  total flux cleaned = 0.000399687 Jy
! Total flux subtracted in 200 components = 0.000399687 Jy
! Clean residual min=-0.001584 max=0.001562 Jy/beam
! Clean residual mean=0.000004 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.0734041 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 104 components and 0.0734041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052768Jy  sigma=0.631478
! Fit after  self-cal, rms=0.052772Jy  sigma=0.631461
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.43195e-05 Jy
! Component: 100  -  total flux cleaned = -3.24888e-05 Jy
! Component: 150  -  total flux cleaned = -0.000103489 Jy
! Component: 200  -  total flux cleaned = -0.000169231 Jy
! Total flux subtracted in 200 components = -0.000169231 Jy
! Clean residual min=-0.001607 max=0.001556 Jy/beam
! Clean residual mean=0.000004 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.0732348 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 122 components and 0.0732348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052754Jy  sigma=0.631334
! Fit after  self-cal, rms=0.052755Jy  sigma=0.631329
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052755Jy  sigma=0.631329
! Fit after  self-cal, rms=0.052662Jy  sigma=0.631283
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.143 mas, bmaj=11.23 mas, bpa=0.2162 degrees
! Estimated noise=0.767794 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.93215e-05 Jy
! Component: 100  -  total flux cleaned = -3.8372e-05 Jy
! Component: 150  -  total flux cleaned = -3.81747e-05 Jy
! Component: 200  -  total flux cleaned = -2.81051e-05 Jy
! Total flux subtracted in 200 components = -2.81051e-05 Jy
! Clean residual min=-0.001621 max=0.001349 Jy/beam
! Clean residual mean=0.000004 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.0732067 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 145 components and 0.0732067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052656Jy  sigma=0.631232
! Fit after  self-cal, rms=0.052656Jy  sigma=0.631225
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.10843e-05 Jy
! Component: 100  -  total flux cleaned = -1.34497e-05 Jy
! Component: 150  -  total flux cleaned = -4.71644e-06 Jy
! Component: 200  -  total flux cleaned = 1.97579e-05 Jy
! Total flux subtracted in 200 components = 1.97579e-05 Jy
! Clean residual min=-0.001622 max=0.001343 Jy/beam
! Clean residual mean=0.000004 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.0732265 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 154 components and 0.0732265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052653Jy  sigma=0.631193
! Fit after  self-cal, rms=0.052652Jy  sigma=0.631189
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.055 mas, bmaj=10.65 mas, bpa=-2.214 degrees
! Estimated noise=0.76795 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.055 x 10.65 at -2.214 degrees (North through East)
! Clean map  min=-0.0015698  max=0.067601 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.493 mas, bmaj=9.861 mas, bpa=-3.43 degrees
! Estimated noise=1.27208 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0516887 Jy
! Component: 100  -  total flux cleaned = 0.0630947 Jy
! Component: 150  -  total flux cleaned = 0.0647083 Jy
! Component: 200  -  total flux cleaned = 0.066506 Jy
! Total flux subtracted in 200 components = 0.066506 Jy
! Clean residual min=-0.004512 max=0.004290 Jy/beam
! Clean residual mean=-0.000001 rms=0.001033 Jy/beam
! Combined flux in latest and established models = 0.066506 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.066506 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.055 mas, bmaj=10.65 mas, bpa=-2.214 degrees
! Estimated noise=0.76795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250175 Jy
! Component: 100  -  total flux cleaned = 0.00374301 Jy
! Component: 150  -  total flux cleaned = 0.00431672 Jy
! Component: 200  -  total flux cleaned = 0.00479282 Jy
! Total flux subtracted in 200 components = 0.00479282 Jy
! Clean residual min=-0.001887 max=0.001603 Jy/beam
! Clean residual mean=0.000004 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.0712988 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 45 components and 0.0712989 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.143 mas, bmaj=11.23 mas, bpa=0.2162 degrees
! Estimated noise=0.767794 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000718206 Jy
! Component: 100  -  total flux cleaned = 0.000889595 Jy
! Component: 150  -  total flux cleaned = 0.00102321 Jy
! Component: 200  -  total flux cleaned = 0.0011196 Jy
! Total flux subtracted in 200 components = 0.0011196 Jy
! Clean residual min=-0.001676 max=0.001413 Jy/beam
! Clean residual mean=0.000004 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.0724185 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.76756e-05 Jy
! Component: 100  -  total flux cleaned = 6.4902e-05 Jy
! Component: 150  -  total flux cleaned = 7.92404e-05 Jy
! Component: 200  -  total flux cleaned = 7.99184e-05 Jy
! Total flux subtracted in 200 components = 7.99184e-05 Jy
! Clean residual min=-0.001641 max=0.001393 Jy/beam
! Clean residual mean=0.000004 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.0724984 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 95 components and 0.0724984 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.055 mas, bmaj=10.65 mas, bpa=-2.214 degrees
! Estimated noise=0.76795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.11534e-05 Jy
! Component: 100  -  total flux cleaned = 0.000194384 Jy
! Component: 150  -  total flux cleaned = 0.000241399 Jy
! Component: 200  -  total flux cleaned = 0.000199264 Jy
! Total flux subtracted in 200 components = 0.000199264 Jy
! Clean residual min=-0.001698 max=0.001617 Jy/beam
! Clean residual mean=0.000004 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.0726977 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 118 components and 0.0726977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.052677Jy  sigma=0.631402
! Fit after  self-cal, rms=0.052674Jy  sigma=0.631379
wmodel J0323-2255_C_map.mod
! Writing 118 model components to file: J0323-2255_C_map.mod
wobs   J0323-2255_C_uvs.fits
! Writing UV FITS file: J0323-2255_C_uvs.fits
wwins  J0323-2255_C_map.win
! wwins: Wrote 2 windows to J0323-2255_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000244679 Jy
! Component: 100  -  total flux cleaned = -0.000145416 Jy
! Component: 150  -  total flux cleaned = 9.84251e-05 Jy
! Component: 200  -  total flux cleaned = 0.000307606 Jy
! Component: 250  -  total flux cleaned = 0.000529656 Jy
! Component: 300  -  total flux cleaned = 0.000678474 Jy
! Component: 350  -  total flux cleaned = 0.00073978 Jy
! Component: 400  -  total flux cleaned = 0.000857846 Jy
! Component: 450  -  total flux cleaned = 0.000953346 Jy
! Component: 500  -  total flux cleaned = 0.000990693 Jy
! Component: 550  -  total flux cleaned = 0.00102712 Jy
! Component: 600  -  total flux cleaned = 0.00104494 Jy
! Component: 650  -  total flux cleaned = 0.00109668 Jy
! Component: 700  -  total flux cleaned = 0.00114719 Jy
! Component: 750  -  total flux cleaned = 0.00118023 Jy
! Component: 800  -  total flux cleaned = 0.00124497 Jy
! Component: 850  -  total flux cleaned = 0.00129271 Jy
! Component: 900  -  total flux cleaned = 0.00135522 Jy
! Component: 950  -  total flux cleaned = 0.00138564 Jy
! Component: 1000  -  total flux cleaned = 0.00144564 Jy
! Component: 1050  -  total flux cleaned = 0.00147508 Jy
! Component: 1100  -  total flux cleaned = 0.00151879 Jy
! Component: 1150  -  total flux cleaned = 0.00159032 Jy
! Component: 1200  -  total flux cleaned = 0.0016748 Jy
! Component: 1250  -  total flux cleaned = 0.00175797 Jy
! Component: 1300  -  total flux cleaned = 0.00178535 Jy
! Component: 1350  -  total flux cleaned = 0.00186646 Jy
! Component: 1400  -  total flux cleaned = 0.00194602 Jy
! Component: 1450  -  total flux cleaned = 0.00199838 Jy
! Component: 1500  -  total flux cleaned = 0.00202429 Jy
! Component: 1550  -  total flux cleaned = 0.00210088 Jy
! Component: 1600  -  total flux cleaned = 0.0021135 Jy
! Component: 1650  -  total flux cleaned = 0.00218845 Jy
! Component: 1700  -  total flux cleaned = 0.00225002 Jy
! Component: 1750  -  total flux cleaned = 0.00229871 Jy
! Component: 1800  -  total flux cleaned = 0.00231076 Jy
! Component: 1850  -  total flux cleaned = 0.00233443 Jy
! Component: 1900  -  total flux cleaned = 0.00234627 Jy
! Component: 1950  -  total flux cleaned = 0.00236952 Jy
! Component: 2000  -  total flux cleaned = 0.002381 Jy
! Component: 2050  -  total flux cleaned = 0.00240395 Jy
! Component: 2100  -  total flux cleaned = 0.00241525 Jy
! Component: 2150  -  total flux cleaned = 0.0024488 Jy
! Component: 2200  -  total flux cleaned = 0.00249317 Jy
! Component: 2250  -  total flux cleaned = 0.00252606 Jy
! Component: 2300  -  total flux cleaned = 0.00252599 Jy
! Component: 2350  -  total flux cleaned = 0.00254745 Jy
! Component: 2400  -  total flux cleaned = 0.00253672 Jy
! Component: 2450  -  total flux cleaned = 0.002558 Jy
! Component: 2500  -  total flux cleaned = 0.00257907 Jy
! Component: 2550  -  total flux cleaned = 0.00258957 Jy
! Component: 2600  -  total flux cleaned = 0.00264133 Jy
! Component: 2650  -  total flux cleaned = 0.0026618 Jy
! Component: 2700  -  total flux cleaned = 0.00268217 Jy
! Component: 2750  -  total flux cleaned = 0.00271247 Jy
! Component: 2800  -  total flux cleaned = 0.00275252 Jy
! Component: 2850  -  total flux cleaned = 0.00274264 Jy
! Component: 2900  -  total flux cleaned = 0.00278207 Jy
! Component: 2950  -  total flux cleaned = 0.00280168 Jy
! Component: 3000  -  total flux cleaned = 0.00284051 Jy
! Component: 3050  -  total flux cleaned = 0.00281146 Jy
! Component: 3100  -  total flux cleaned = 0.00282111 Jy
! Component: 3150  -  total flux cleaned = 0.00284012 Jy
! Component: 3200  -  total flux cleaned = 0.00282109 Jy
! Component: 3250  -  total flux cleaned = 0.00282116 Jy
! Component: 3300  -  total flux cleaned = 0.00284931 Jy
! Component: 3350  -  total flux cleaned = 0.00285862 Jy
! Component: 3400  -  total flux cleaned = 0.00287723 Jy
! Component: 3450  -  total flux cleaned = 0.00287723 Jy
! Component: 3500  -  total flux cleaned = 0.00292304 Jy
! Component: 3550  -  total flux cleaned = 0.00293211 Jy
! Component: 3600  -  total flux cleaned = 0.00294123 Jy
! Component: 3650  -  total flux cleaned = 0.0029502 Jy
! Component: 3700  -  total flux cleaned = 0.00295912 Jy
! Component: 3750  -  total flux cleaned = 0.00295915 Jy
! Component: 3800  -  total flux cleaned = 0.00296798 Jy
! Component: 3850  -  total flux cleaned = 0.0029768 Jy
! Component: 3900  -  total flux cleaned = 0.00295037 Jy
! Component: 3950  -  total flux cleaned = 0.00295038 Jy
! Component: 4000  -  total flux cleaned = 0.00292426 Jy
! Component: 4050  -  total flux cleaned = 0.00295028 Jy
! Total flux subtracted in 4096 components = 0.00292435 Jy
! Clean residual min=-0.000471 max=0.000446 Jy/beam
! Clean residual mean=-0.000000 rms=0.000166 Jy/beam
! Combined flux in latest and established models = 0.075622 Jy
keep
! Adding 345 model components to the UV plane model.
! The established model now contains 463 components and 0.075622 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J0323-2255_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.055 x 10.65 at -2.214 degrees (North through East)
! Clean map  min=-0.0013696  max=0.067328 Jy/beam
! Writing clean map to FITS file: .//J0323-2255_C_map.fits
wmodel .//J0323-2255_C_map.mod
! Writing 463 model components to file: .//J0323-2255_C_map.mod
wobs   .//J0323-2255_C_uvs.fits
! Writing UV FITS file: .//J0323-2255_C_uvs.fits
wwins  .//J0323-2255_C_map.win
! wwins: Wrote 3 windows to .//J0323-2255_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0673278 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000166149 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.740326 0.740326 1.48065 2.96131 5.92261 11.8452 23.6904 47.3809 94.7618
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.067 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  405.226 
quit
! Quitting program
! Log file .//J0323-2255_C_dfm.log closed on Sun Jan 19 23:54:02 2020