! Started logfile: .//J0322+1513_C_dfm.log on Sun Jan 19 23:53:41 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J0322+1513_C_uvm.fits
! Reading UV FITS file: .//J0322+1513_C_uvm.fits
! AN table 1: 17 integrations on 15 of 15 possible baselines.
! AN table 2: 17 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.970012 visibilities/baseline/integration-bin.
! Found source: J0322+1513
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 67 lines of history.
! 
! Reading 6728 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0322+1513_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.002755Jy  sigma=21.785043
! Fit after  self-cal, rms=0.954614Jy  sigma=20.718830
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.474 mas, bmaj=3.629 mas, bpa=9.822 degrees
! Estimated noise=0.642259 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0344226 Jy
! Component: 100  -  total flux cleaned = 0.0427517 Jy
! Total flux subtracted in 100 components = 0.0427517 Jy
! Clean residual min=-0.002816 max=0.005290 Jy/beam
! Clean residual mean=-0.000001 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.0427517 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0427517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034134Jy  sigma=0.710520
! Fit after  self-cal, rms=0.033433Jy  sigma=0.694792
! Inverting map 
! Added new window around map position (2.1, 2.1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00547742 Jy
! Component: 100  -  total flux cleaned = 0.0084065 Jy
! Total flux subtracted in 100 components = 0.0084065 Jy
! Clean residual min=-0.002095 max=0.002124 Jy/beam
! Clean residual mean=-0.000000 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.0511582 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.0511582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032428Jy  sigma=0.669627
! Fit after  self-cal, rms=0.032349Jy  sigma=0.668149
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.766 mas, bmaj=4.05 mas, bpa=8.571 degrees
! Estimated noise=0.42811 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00328059 Jy
! Component: 100  -  total flux cleaned = 0.00520767 Jy
! Component: 150  -  total flux cleaned = 0.00647119 Jy
! Component: 200  -  total flux cleaned = 0.00735407 Jy
! Total flux subtracted in 200 components = 0.00735407 Jy
! Clean residual min=-0.001538 max=0.001465 Jy/beam
! Clean residual mean=0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.0585123 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 25 components and 0.0585123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032015Jy  sigma=0.659772
! Fit after  self-cal, rms=0.031987Jy  sigma=0.659250
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.766 x 4.05 at 8.571 degrees (North through East)
! Clean map  min=-0.0014476  max=0.04685 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    NL        0.00*    
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     HN        1.02     KP        0.99     LA        1.00     
!   MK        0.96     NL        0.92     OV        1.00     PT        0.97     
!   SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    NL        0.00*    
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     HN        1.05     KP        1.04     LA        0.96     
!   MK        0.99     NL        1.06     OV        0.99     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    NL        0.00*    
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     HN        1.05     KP        1.00     LA        0.99     
!   MK        0.86     NL        0.98     OV        0.92     PT        0.93     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.09     HN        1.36     NL        1.16     
!   OV        0.89     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     HN        1.06     KP        1.02     LA        0.96     
!   MK        0.91     NL        1.01     OV        0.93     PT        1.03     
!   SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.89     HN        1.05     NL        1.14     
!   OV        0.95     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.15     HN        1.10     KP        0.98     LA        1.06     
!   MK        0.98     NL        0.91     OV        0.97     PT        0.95     
!   SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.02     NL        1.08     
!   OV        0.99     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     HN        1.01     KP        1.00     LA        1.00     
!   MK        1.01     NL        1.00     OV        0.96     PT        0.98     
!   SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.89     HN        1.09     NL        0.99     
!   OV        0.89     PT        1.08     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.13     HN        0.96     KP        1.04     LA        1.00     
!   MK        0.91     NL        0.97     OV        0.97     PT        1.01     
!   SC        0.92     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.03     NL        1.08     
!   OV        1.01     PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     HN        1.05     KP        1.00     LA        1.04     
!   MK        0.96     NL        0.99     OV        1.03     PT        1.01     
!   SC        1.11     
! 
! 
! Fit before self-cal, rms=0.031987Jy  sigma=0.659250
! Fit after  self-cal, rms=0.031605Jy  sigma=0.653856
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.759 mas, bmaj=4.05 mas, bpa=8.446 degrees
! Estimated noise=0.423266 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00050098 Jy
! Component: 100  -  total flux cleaned = 0.000609759 Jy
! Component: 150  -  total flux cleaned = 0.000626117 Jy
! Component: 200  -  total flux cleaned = 0.000651549 Jy
! Total flux subtracted in 200 components = 0.000651549 Jy
! Clean residual min=-0.001201 max=0.001113 Jy/beam
! Clean residual mean=0.000001 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.0591638 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 0.0591638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031577Jy  sigma=0.653362
! Fit after  self-cal, rms=0.031586Jy  sigma=0.653197
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031586Jy  sigma=0.653197
! Fit after  self-cal, rms=0.031579Jy  sigma=0.653169
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.755 mas, bmaj=4.047 mas, bpa=8.377 degrees
! Estimated noise=0.423297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000253923 Jy
! Component: 100  -  total flux cleaned = 0.000265289 Jy
! Component: 150  -  total flux cleaned = 0.000304326 Jy
! Component: 200  -  total flux cleaned = 0.000338415 Jy
! Total flux subtracted in 200 components = 0.000338415 Jy
! Clean residual min=-0.001164 max=0.001087 Jy/beam
! Clean residual mean=0.000001 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.0595022 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 31 components and 0.0595022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031570Jy  sigma=0.653022
! Fit after  self-cal, rms=0.031568Jy  sigma=0.653003
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.03089e-05 Jy
! Component: 100  -  total flux cleaned = 3.04425e-05 Jy
! Component: 150  -  total flux cleaned = 3.69437e-05 Jy
! Component: 200  -  total flux cleaned = 3.68743e-05 Jy
! Total flux subtracted in 200 components = 3.68743e-05 Jy
! Clean residual min=-0.001171 max=0.001074 Jy/beam
! Clean residual mean=0.000001 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.0595391 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 37 components and 0.0595391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031565Jy  sigma=0.652947
! Fit after  self-cal, rms=0.031564Jy  sigma=0.652941
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031564Jy  sigma=0.652941
! Fit after  self-cal, rms=0.031571Jy  sigma=0.652920
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.752 mas, bmaj=4.045 mas, bpa=8.293 degrees
! Estimated noise=0.423602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000180549 Jy
! Component: 100  -  total flux cleaned = 0.000180265 Jy
! Component: 150  -  total flux cleaned = 0.000174643 Jy
! Component: 200  -  total flux cleaned = 0.000174705 Jy
! Total flux subtracted in 200 components = 0.000174705 Jy
! Clean residual min=-0.001169 max=0.001083 Jy/beam
! Clean residual mean=0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.0597138 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 39 components and 0.0597138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031568Jy  sigma=0.652874
! Fit after  self-cal, rms=0.031568Jy  sigma=0.652869
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.42664e-06 Jy
! Component: 100  -  total flux cleaned = -7.29053e-07 Jy
! Component: 150  -  total flux cleaned = -5.48346e-06 Jy
! Component: 200  -  total flux cleaned = -1.0033e-05 Jy
! Total flux subtracted in 200 components = -1.0033e-05 Jy
! Clean residual min=-0.001170 max=0.001083 Jy/beam
! Clean residual mean=0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.0597038 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 42 components and 0.0597038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031566Jy  sigma=0.652843
! Fit after  self-cal, rms=0.031566Jy  sigma=0.652841
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031566Jy  sigma=0.652841
! Fit after  self-cal, rms=0.031581Jy  sigma=0.652831
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.414 mas, bmaj=5.587 mas, bpa=-4.014 degrees
! Estimated noise=0.521354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144757 Jy
! Component: 100  -  total flux cleaned = 0.000150412 Jy
! Component: 150  -  total flux cleaned = 0.000160103 Jy
! Component: 200  -  total flux cleaned = 0.000164114 Jy
! Total flux subtracted in 200 components = 0.000164114 Jy
! Clean residual min=-0.001197 max=0.001285 Jy/beam
! Clean residual mean=0.000002 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.0598679 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 0.0598679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031581Jy  sigma=0.652834
! Fit after  self-cal, rms=0.031580Jy  sigma=0.652828
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.43414e-05 Jy
! Component: 100  -  total flux cleaned = 2.96779e-05 Jy
! Component: 150  -  total flux cleaned = 3.27907e-05 Jy
! Component: 200  -  total flux cleaned = 3.27738e-05 Jy
! Total flux subtracted in 200 components = 3.27738e-05 Jy
! Clean residual min=-0.001196 max=0.001282 Jy/beam
! Clean residual mean=0.000002 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.0599007 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.0599007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031581Jy  sigma=0.652844
! Fit after  self-cal, rms=0.031580Jy  sigma=0.652839
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.75 mas, bmaj=4.044 mas, bpa=8.237 degrees
! Estimated noise=0.423893 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.75 x 4.044 at 8.237 degrees (North through East)
! Clean map  min=-0.0011512  max=0.046357 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.461 mas, bmaj=3.613 mas, bpa=9.569 degrees
! Estimated noise=0.639004 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0345919 Jy
! Component: 100  -  total flux cleaned = 0.0443365 Jy
! Component: 150  -  total flux cleaned = 0.0493155 Jy
! Component: 200  -  total flux cleaned = 0.0524035 Jy
! Total flux subtracted in 200 components = 0.0524035 Jy
! Clean residual min=-0.001952 max=0.002029 Jy/beam
! Clean residual mean=-0.000000 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.0524035 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0524035 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.75 mas, bmaj=4.044 mas, bpa=8.237 degrees
! Estimated noise=0.423893 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00298058 Jy
! Component: 100  -  total flux cleaned = 0.00473254 Jy
! Component: 150  -  total flux cleaned = 0.00585906 Jy
! Component: 200  -  total flux cleaned = 0.00638887 Jy
! Total flux subtracted in 200 components = 0.00638887 Jy
! Clean residual min=-0.001320 max=0.001226 Jy/beam
! Clean residual mean=0.000001 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.0587923 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 26 components and 0.0587923 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.414 mas, bmaj=5.587 mas, bpa=-4.014 degrees
! Estimated noise=0.521354 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000716488 Jy
! Component: 100  -  total flux cleaned = 0.000864113 Jy
! Component: 150  -  total flux cleaned = 0.000945386 Jy
! Component: 200  -  total flux cleaned = 0.000999811 Jy
! Total flux subtracted in 200 components = 0.000999811 Jy
! Clean residual min=-0.001180 max=0.001318 Jy/beam
! Clean residual mean=0.000002 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.0597921 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.44157e-05 Jy
! Component: 100  -  total flux cleaned = 4.39811e-05 Jy
! Component: 150  -  total flux cleaned = 4.99961e-05 Jy
! Component: 200  -  total flux cleaned = 5.5696e-05 Jy
! Total flux subtracted in 200 components = 5.5696e-05 Jy
! Clean residual min=-0.001184 max=0.001304 Jy/beam
! Clean residual mean=0.000002 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.0598478 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 51 components and 0.0598478 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.75 mas, bmaj=4.044 mas, bpa=8.237 degrees
! Estimated noise=0.423893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000217882 Jy
! Component: 100  -  total flux cleaned = 0.000205271 Jy
! Component: 150  -  total flux cleaned = 0.000182924 Jy
! Component: 200  -  total flux cleaned = 0.000152736 Jy
! Total flux subtracted in 200 components = 0.000152736 Jy
! Clean residual min=-0.001213 max=0.001100 Jy/beam
! Clean residual mean=0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.0600006 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 61 components and 0.0600006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031588Jy  sigma=0.652951
! Fit after  self-cal, rms=0.031587Jy  sigma=0.652906
wmodel J0322+1513_C_map.mod
! Writing 61 model components to file: J0322+1513_C_map.mod
wobs   J0322+1513_C_uvs.fits
! Writing UV FITS file: J0322+1513_C_uvs.fits
wwins  J0322+1513_C_map.win
! wwins: Wrote 2 windows to J0322+1513_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000451123 Jy
! Component: 100  -  total flux cleaned = -0.000493424 Jy
! Component: 150  -  total flux cleaned = -0.000474052 Jy
! Component: 200  -  total flux cleaned = -0.000492922 Jy
! Component: 250  -  total flux cleaned = -0.000563927 Jy
! Component: 300  -  total flux cleaned = -0.000649849 Jy
! Component: 350  -  total flux cleaned = -0.000733245 Jy
! Component: 400  -  total flux cleaned = -0.000782013 Jy
! Component: 450  -  total flux cleaned = -0.000892463 Jy
! Component: 500  -  total flux cleaned = -0.000953829 Jy
! Component: 550  -  total flux cleaned = -0.000998917 Jy
! Component: 600  -  total flux cleaned = -0.00105794 Jy
! Component: 650  -  total flux cleaned = -0.00110171 Jy
! Component: 700  -  total flux cleaned = -0.00118718 Jy
! Component: 750  -  total flux cleaned = -0.00120098 Jy
! Component: 800  -  total flux cleaned = -0.00125589 Jy
! Component: 850  -  total flux cleaned = -0.00125555 Jy
! Component: 900  -  total flux cleaned = -0.00125514 Jy
! Component: 950  -  total flux cleaned = -0.001229 Jy
! Component: 1000  -  total flux cleaned = -0.00122912 Jy
! Component: 1050  -  total flux cleaned = -0.0012039 Jy
! Component: 1100  -  total flux cleaned = -0.00117904 Jy
! Component: 1150  -  total flux cleaned = -0.00117929 Jy
! Component: 1200  -  total flux cleaned = -0.00119154 Jy
! Component: 1250  -  total flux cleaned = -0.00115522 Jy
! Component: 1300  -  total flux cleaned = -0.00116731 Jy
! Component: 1350  -  total flux cleaned = -0.00114388 Jy
! Component: 1400  -  total flux cleaned = -0.00117869 Jy
! Component: 1450  -  total flux cleaned = -0.00114437 Jy
! Component: 1500  -  total flux cleaned = -0.00115553 Jy
! Component: 1550  -  total flux cleaned = -0.00113305 Jy
! Component: 1600  -  total flux cleaned = -0.00112196 Jy
! Component: 1650  -  total flux cleaned = -0.00111099 Jy
! Component: 1700  -  total flux cleaned = -0.0011113 Jy
! Component: 1750  -  total flux cleaned = -0.00107931 Jy
! Component: 1800  -  total flux cleaned = -0.00110044 Jy
! Component: 1850  -  total flux cleaned = -0.00106909 Jy
! Component: 1900  -  total flux cleaned = -0.00108976 Jy
! Component: 1950  -  total flux cleaned = -0.00106945 Jy
! Component: 2000  -  total flux cleaned = -0.00104927 Jy
! Component: 2050  -  total flux cleaned = -0.0010592 Jy
! Component: 2100  -  total flux cleaned = -0.00105895 Jy
! Component: 2150  -  total flux cleaned = -0.00103933 Jy
! Component: 2200  -  total flux cleaned = -0.00101978 Jy
! Component: 2250  -  total flux cleaned = -0.000981593 Jy
! Component: 2300  -  total flux cleaned = -0.000943832 Jy
! Component: 2350  -  total flux cleaned = -0.000972097 Jy
! Component: 2400  -  total flux cleaned = -0.000925585 Jy
! Component: 2450  -  total flux cleaned = -0.000907217 Jy
! Component: 2500  -  total flux cleaned = -0.000879778 Jy
! Component: 2550  -  total flux cleaned = -0.000861625 Jy
! Component: 2600  -  total flux cleaned = -0.000843757 Jy
! Component: 2650  -  total flux cleaned = -0.000808357 Jy
! Component: 2700  -  total flux cleaned = -0.000773285 Jy
! Component: 2750  -  total flux cleaned = -0.000764457 Jy
! Component: 2800  -  total flux cleaned = -0.000712727 Jy
! Component: 2850  -  total flux cleaned = -0.000695489 Jy
! Component: 2900  -  total flux cleaned = -0.000669984 Jy
! Component: 2950  -  total flux cleaned = -0.000610996 Jy
! Component: 3000  -  total flux cleaned = -0.000560858 Jy
! Component: 3050  -  total flux cleaned = -0.000560812 Jy
! Component: 3100  -  total flux cleaned = -0.000462224 Jy
! Component: 3150  -  total flux cleaned = -0.000462399 Jy
! Component: 3200  -  total flux cleaned = -0.000446204 Jy
! Component: 3250  -  total flux cleaned = -0.000422083 Jy
! Component: 3300  -  total flux cleaned = -0.000358352 Jy
! Component: 3350  -  total flux cleaned = -0.000334626 Jy
! Component: 3400  -  total flux cleaned = -0.000287609 Jy
! Component: 3450  -  total flux cleaned = -0.000272098 Jy
! Component: 3500  -  total flux cleaned = -0.000241116 Jy
! Component: 3550  -  total flux cleaned = -0.000202699 Jy
! Component: 3600  -  total flux cleaned = -0.000179833 Jy
! Component: 3650  -  total flux cleaned = -0.000126807 Jy
! Component: 3700  -  total flux cleaned = -0.000111869 Jy
! Component: 3750  -  total flux cleaned = -0.000104457 Jy
! Component: 3800  -  total flux cleaned = -6.73195e-05 Jy
! Component: 3850  -  total flux cleaned = -3.04788e-05 Jy
! Component: 3900  -  total flux cleaned = 6.11783e-06 Jy
! Component: 3950  -  total flux cleaned = 4.2413e-05 Jy
! Component: 4000  -  total flux cleaned = 4.96836e-05 Jy
! Component: 4050  -  total flux cleaned = 0.00010702 Jy
! Total flux subtracted in 4096 components = 0.000114194 Jy
! Clean residual min=-0.000371 max=0.000393 Jy/beam
! Clean residual mean=0.000002 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.0601148 Jy
keep
! Adding 303 model components to the UV plane model.
! The established model now contains 364 components and 0.0601148 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J0322+1513_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.75 x 4.044 at 8.237 degrees (North through East)
! Clean map  min=-0.00090276  max=0.046371 Jy/beam
! Writing clean map to FITS file: .//J0322+1513_C_map.fits
wmodel .//J0322+1513_C_map.mod
! Writing 364 model components to file: .//J0322+1513_C_map.mod
wobs   .//J0322+1513_C_uvs.fits
! Writing UV FITS file: .//J0322+1513_C_uvs.fits
wwins  .//J0322+1513_C_map.win
! wwins: Wrote 3 windows to .//J0322+1513_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0463708 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000129324 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.836673 0.836673 1.67335 3.34669 6.69338 13.3868 26.7735 53.5471
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.046 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  358.563 
quit
! Quitting program
! Log file .//J0322+1513_C_dfm.log closed on Sun Jan 19 23:53:45 2020