! Started logfile: .//J0217+7349_X_dfm.log on Sun Jan 19 23:49:28 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs .//J0217+7349_X_uvm.fits ! Reading UV FITS file: .//J0217+7349_X_uvm.fits ! AN table 1: 34 integrations on 21 of 21 possible baselines. ! AN table 2: 17 integrations on 36 of 36 possible baselines. ! AN table 3: 33 integrations on 21 of 21 possible baselines. ! AN table 4: 17 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.846066 visibilities/baseline/integration-bin. ! Found source: J0217+7349 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 17808 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0217+7349_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 72 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 72 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 72 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 72 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 72 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 72 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 72 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 72 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=2.885322Jy sigma=52.110846 ! Fit after self-cal, rms=1.815838Jy sigma=32.588958 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8928 mas, bmaj=1.401 mas, bpa=-61.04 degrees ! Estimated noise=0.553007 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.8524 Jy ! Component: 100 - total flux cleaned = 2.48578 Jy ! Total flux subtracted in 100 components = 2.48578 Jy ! Clean residual min=-0.101040 max=0.270010 Jy/beam ! Clean residual mean=-0.000119 rms=0.022694 Jy/beam ! Combined flux in latest and established models = 2.48578 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 2.48578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.671162Jy sigma=11.831031 ! Fit after self-cal, rms=0.666826Jy sigma=11.742238 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299365 Jy ! Component: 100 - total flux cleaned = 0.460038 Jy ! Total flux subtracted in 100 components = 0.460038 Jy ! Clean residual min=-0.086393 max=0.120068 Jy/beam ! Clean residual mean=-0.000068 rms=0.014199 Jy/beam ! Combined flux in latest and established models = 2.94581 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 2.94582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.440418Jy sigma=7.700970 ! Fit after self-cal, rms=0.438974Jy sigma=7.670281 ! Inverting map ! Added new window around map position (2, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120951 Jy ! Component: 100 - total flux cleaned = 0.195617 Jy ! Total flux subtracted in 100 components = 0.195617 Jy ! Clean residual min=-0.082553 max=0.087861 Jy/beam ! Clean residual mean=-0.000031 rms=0.012269 Jy/beam ! Combined flux in latest and established models = 3.14143 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 3.14143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.382119Jy sigma=6.705863 ! Fit after self-cal, rms=0.380633Jy sigma=6.677048 ! Inverting map ! Added new window around map position (6.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.082883 Jy ! Component: 100 - total flux cleaned = 0.134975 Jy ! Total flux subtracted in 100 components = 0.134975 Jy ! Clean residual min=-0.073177 max=0.077869 Jy/beam ! Clean residual mean=0.000001 rms=0.011260 Jy/beam ! Combined flux in latest and established models = 3.27641 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 3.27641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.348585Jy sigma=6.105630 ! Fit after self-cal, rms=0.346886Jy sigma=6.072954 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.18 mas, bmaj=1.774 mas, bpa=-66.54 degrees ! Estimated noise=0.299539 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105432 Jy ! Component: 100 - total flux cleaned = 0.176092 Jy ! Component: 150 - total flux cleaned = 0.229096 Jy ! Component: 200 - total flux cleaned = 0.270373 Jy ! Total flux subtracted in 200 components = 0.270373 Jy ! Clean residual min=-0.071378 max=0.058994 Jy/beam ! Clean residual mean=0.000150 rms=0.012700 Jy/beam ! Combined flux in latest and established models = 3.54678 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 77 components and 3.54678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.304367Jy sigma=5.292242 ! Fit after self-cal, rms=0.303471Jy sigma=5.274233 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.18 x 1.774 at -66.54 degrees (North through East) ! Clean map min=-0.06695 max=2.3436 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.08 KP 1.01 ! NL 0.92 OV 1.00 PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.97 HN 1.07 KP 1.04 ! LA 1.00 MK 0.95 NL 1.01 OV 1.13 ! PT 1.02 ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.05 KP 1.00 LA 0.97 MK 1.02 ! NL 0.87 PT 0.92 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.04 HN 1.10 KP 1.08 ! LA 1.01 NL 0.87 OV 1.06 PT 0.95 ! SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.08 KP 1.01 ! NL 0.92 OV 1.00 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.97 HN 1.05 KP 1.04 ! LA 1.00 MK 0.94 NL 1.00 OV 1.12 ! PT 1.02 ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.06 KP 0.99 LA 0.97 MK 1.03 ! NL 0.87 PT 0.92 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.03 HN 1.09 KP 1.08 ! LA 1.01 NL 0.88 OV 1.07 PT 0.95 ! SC 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.08 KP 1.01 ! NL 0.92 OV 1.01 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.97 HN 1.06 KP 1.03 ! LA 1.00 MK 0.95 NL 1.00 OV 1.12 ! PT 1.02 ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.05 KP 1.00 LA 0.97 MK 1.02 ! NL 0.87 PT 0.92 SC 1.04 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.04 HN 1.10 KP 1.09 ! LA 1.01 NL 0.88 OV 1.07 PT 0.95 ! SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.07 KP 1.01 ! NL 0.92 OV 1.01 PT 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.97 HN 1.06 KP 1.03 ! LA 1.02 MK 0.94 NL 1.00 OV 1.11 ! PT 1.02 ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.05 KP 0.99 LA 0.97 MK 1.03 ! NL 0.87 PT 0.92 SC 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.04 HN 1.10 KP 1.08 ! LA 1.01 NL 0.88 OV 1.07 PT 0.95 ! SC 0.99 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.06 KP 1.01 ! NL 0.92 OV 1.01 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.97 HN 1.04 KP 1.12 ! LA 1.01 MK 0.94 NL 1.01 OV 1.11 ! PT 1.02 ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.05 KP 0.99 LA 0.97 MK 1.03 ! NL 0.89 PT 0.92 SC 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.05 HN 1.09 KP 1.09 ! LA 1.02 NL 0.88 OV 1.08 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.06 KP 1.02 ! NL 0.92 OV 1.01 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.97 HN 1.04 KP 1.09 ! LA 1.01 MK 0.94 NL 1.00 OV 1.12 ! PT 1.03 ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.04 KP 0.99 LA 0.98 MK 1.05 ! NL 0.88 PT 0.92 SC 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.05 HN 1.10 KP 1.10 ! LA 1.02 NL 0.89 OV 1.09 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.06 KP 1.01 ! NL 0.91 OV 1.01 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.96 HN 1.03 KP 1.03 ! LA 1.00 MK 0.94 NL 1.00 OV 1.11 ! PT 1.02 ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.04 KP 0.99 LA 0.97 MK 1.05 ! NL 0.88 PT 0.92 SC 1.10 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 1.05 HN 1.10 KP 1.10 ! LA 1.02 NL 0.89 OV 1.09 PT 0.96 ! SC 1.03 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.06 KP 1.01 ! NL 0.91 OV 1.01 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.97 HN 1.03 KP 1.03 ! LA 1.00 MK 0.94 NL 1.00 OV 1.11 ! PT 1.02 ! ! A total of 48 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HN 1.04 KP 0.99 LA 0.98 MK 1.04 ! NL 0.88 PT 0.92 SC 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 1.03 HN 1.10 KP 1.09 ! LA 1.01 NL 0.89 OV 1.08 PT 0.95 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.303471Jy sigma=5.274233 ! Fit after self-cal, rms=0.195031Jy sigma=3.031693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.239 mas, bmaj=1.859 mas, bpa=-74.23 degrees ! Estimated noise=0.305465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.6, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00378273 Jy ! Component: 100 - total flux cleaned = -0.00981939 Jy ! Component: 150 - total flux cleaned = -0.0138527 Jy ! Component: 200 - total flux cleaned = -0.0172126 Jy ! Total flux subtracted in 200 components = -0.0172126 Jy ! Clean residual min=-0.017887 max=0.022161 Jy/beam ! Clean residual mean=-0.000070 rms=0.004323 Jy/beam ! Combined flux in latest and established models = 3.52957 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 108 components and 3.52957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.185399Jy sigma=2.862660 ! Fit after self-cal, rms=0.185014Jy sigma=2.854964 ! Inverting map ! Added new window around map position (9.2, -5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143622 Jy ! Component: 100 - total flux cleaned = 0.01556 Jy ! Component: 150 - total flux cleaned = 0.0166124 Jy ! Component: 200 - total flux cleaned = 0.0175641 Jy ! Total flux subtracted in 200 components = 0.0175641 Jy ! Clean residual min=-0.018014 max=0.017848 Jy/beam ! Clean residual mean=-0.000055 rms=0.003966 Jy/beam ! Combined flux in latest and established models = 3.54713 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 129 components and 3.54713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.181188Jy sigma=2.787639 ! Fit after self-cal, rms=0.180986Jy sigma=2.783897 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.180986Jy sigma=2.783897 ! Fit after self-cal, rms=0.175452Jy sigma=2.665040 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.238 mas, bmaj=1.86 mas, bpa=-74.1 degrees ! Estimated noise=0.305475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00952099 Jy ! Component: 100 - total flux cleaned = -0.0106415 Jy ! Component: 150 - total flux cleaned = -0.00924767 Jy ! Component: 200 - total flux cleaned = -0.00924894 Jy ! Total flux subtracted in 200 components = -0.00924894 Jy ! Clean residual min=-0.016721 max=0.016604 Jy/beam ! Clean residual mean=-0.000050 rms=0.003038 Jy/beam ! Combined flux in latest and established models = 3.53788 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 3.53788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.171978Jy sigma=2.607973 ! Fit after self-cal, rms=0.171839Jy sigma=2.605091 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.8, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00941374 Jy ! Component: 100 - total flux cleaned = 0.00984073 Jy ! Component: 150 - total flux cleaned = 0.0102314 Jy ! Component: 200 - total flux cleaned = 0.01058 Jy ! Total flux subtracted in 200 components = 0.01058 Jy ! Clean residual min=-0.016077 max=0.011965 Jy/beam ! Clean residual mean=-0.000047 rms=0.002834 Jy/beam ! Combined flux in latest and established models = 3.54846 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 152 components and 3.54846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.169645Jy sigma=2.564845 ! Fit after self-cal, rms=0.169559Jy sigma=2.563212 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.169559Jy sigma=2.563212 ! Fit after self-cal, rms=0.168612Jy sigma=2.549662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.238 mas, bmaj=1.86 mas, bpa=-74.06 degrees ! Estimated noise=0.305501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00621584 Jy ! Component: 100 - total flux cleaned = -0.00621016 Jy ! Component: 150 - total flux cleaned = -0.00620427 Jy ! Component: 200 - total flux cleaned = -0.00652116 Jy ! Total flux subtracted in 200 components = -0.00652116 Jy ! Clean residual min=-0.015272 max=0.011365 Jy/beam ! Clean residual mean=-0.000044 rms=0.002547 Jy/beam ! Combined flux in latest and established models = 3.54194 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 162 components and 3.54194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.166685Jy sigma=2.519053 ! Fit after self-cal, rms=0.166619Jy sigma=2.517594 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000863246 Jy ! Component: 100 - total flux cleaned = 0.000287872 Jy ! Component: 150 - total flux cleaned = 0.000290704 Jy ! Component: 200 - total flux cleaned = 1.84897e-05 Jy ! Total flux subtracted in 200 components = 1.84897e-05 Jy ! Clean residual min=-0.014136 max=0.010484 Jy/beam ! Clean residual mean=-0.000041 rms=0.002446 Jy/beam ! Combined flux in latest and established models = 3.54196 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 173 components and 3.54196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165583Jy sigma=2.501609 ! Fit after self-cal, rms=0.165549Jy sigma=2.500988 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.165549Jy sigma=2.500988 ! Fit after self-cal, rms=0.165025Jy sigma=2.493906 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=3.272 mas, bpa=-77.72 degrees ! Estimated noise=0.358896 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00811296 Jy ! Component: 100 - total flux cleaned = -0.00884521 Jy ! Component: 150 - total flux cleaned = -0.0091325 Jy ! Component: 200 - total flux cleaned = -0.00961527 Jy ! Total flux subtracted in 200 components = -0.00961527 Jy ! Clean residual min=-0.010260 max=0.009591 Jy/beam ! Clean residual mean=-0.000057 rms=0.002805 Jy/beam ! Combined flux in latest and established models = 3.53234 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 206 components and 3.53234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.164066Jy sigma=2.477825 ! Fit after self-cal, rms=0.164006Jy sigma=2.476519 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022151 Jy ! Component: 100 - total flux cleaned = -0.00067627 Jy ! Component: 150 - total flux cleaned = -0.000480854 Jy ! Component: 200 - total flux cleaned = -0.000303402 Jy ! Total flux subtracted in 200 components = -0.000303402 Jy ! Clean residual min=-0.009740 max=0.009005 Jy/beam ! Clean residual mean=-0.000049 rms=0.002694 Jy/beam ! Combined flux in latest and established models = 3.53204 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 227 components and 3.53204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.163638Jy sigma=2.470808 ! Fit after self-cal, rms=0.163581Jy sigma=2.469508 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.239 mas, bmaj=1.857 mas, bpa=-74.1 degrees ! Estimated noise=0.305468 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.239 x 1.857 at -74.1 degrees (North through East) ! Clean map min=-0.01326 max=2.3978 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.163581Jy sigma=2.469508 ! Fit after self-cal, rms=0.359345Jy sigma=1.057897 ! Inverting map and beam ! Estimated beam: bmin=1.238 mas, bmaj=1.859 mas, bpa=-74.18 degrees ! Estimated noise=0.305527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0057197 Jy ! Component: 100 - total flux cleaned = -0.00747412 Jy ! Component: 150 - total flux cleaned = -0.0082398 Jy ! Component: 200 - total flux cleaned = -0.00869558 Jy ! Total flux subtracted in 200 components = -0.00869558 Jy ! Clean residual min=-0.012029 max=0.008059 Jy/beam ! Clean residual mean=-0.000037 rms=0.002009 Jy/beam ! Combined flux in latest and established models = 3.52335 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 235 components and 3.52334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.358885Jy sigma=1.023033 ! Fit after self-cal, rms=0.358871Jy sigma=1.021653 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293573 Jy ! Component: 100 - total flux cleaned = 0.000507726 Jy ! Component: 150 - total flux cleaned = 0.00050486 Jy ! Component: 200 - total flux cleaned = 0.000507244 Jy ! Total flux subtracted in 200 components = 0.000507244 Jy ! Clean residual min=-0.011393 max=0.007564 Jy/beam ! Clean residual mean=-0.000035 rms=0.001953 Jy/beam ! Combined flux in latest and established models = 3.52385 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 245 components and 3.52385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.358591Jy sigma=1.000707 ! Fit after self-cal, rms=0.358574Jy sigma=0.999346 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.358574Jy sigma=0.999346 ! Fit after self-cal, rms=0.357533Jy sigma=0.992707 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9436 mas, bmaj=1.451 mas, bpa=-69.02 degrees ! Estimated noise=0.576216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.92113 Jy ! Component: 100 - total flux cleaned = 2.57043 Jy ! Component: 150 - total flux cleaned = 2.84543 Jy ! Component: 200 - total flux cleaned = 2.98474 Jy ! Total flux subtracted in 200 components = 2.98474 Jy ! Clean residual min=-0.025601 max=0.071121 Jy/beam ! Clean residual mean=-0.000178 rms=0.007968 Jy/beam ! Combined flux in latest and established models = 2.98474 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 2.98474 Jy ! Inverting map and beam ! Estimated beam: bmin=1.238 mas, bmaj=1.859 mas, bpa=-74.18 degrees ! Estimated noise=0.305439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131045 Jy ! Component: 100 - total flux cleaned = 0.211467 Jy ! Component: 150 - total flux cleaned = 0.271469 Jy ! Component: 200 - total flux cleaned = 0.318468 Jy ! Total flux subtracted in 200 components = 0.318468 Jy ! Clean residual min=-0.015676 max=0.034362 Jy/beam ! Clean residual mean=-0.000085 rms=0.005403 Jy/beam ! Combined flux in latest and established models = 3.30321 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 78 components and 3.30321 Jy ! Inverting map ! Added new window around map position (-1.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0386494 Jy ! Component: 100 - total flux cleaned = 0.0689249 Jy ! Component: 150 - total flux cleaned = 0.0934361 Jy ! Component: 200 - total flux cleaned = 0.113905 Jy ! Total flux subtracted in 200 components = 0.113905 Jy ! Clean residual min=-0.010441 max=0.015815 Jy/beam ! Clean residual mean=-0.000060 rms=0.002948 Jy/beam ! Combined flux in latest and established models = 3.41711 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 123 components and 3.41712 Jy ! Inverting map ! Added new window around map position (-19.2, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179425 Jy ! Component: 100 - total flux cleaned = 0.0327225 Jy ! Component: 150 - total flux cleaned = 0.0454133 Jy ! Component: 200 - total flux cleaned = 0.0542439 Jy ! Total flux subtracted in 200 components = 0.0542439 Jy ! Clean residual min=-0.009292 max=0.010428 Jy/beam ! Clean residual mean=-0.000034 rms=0.002099 Jy/beam ! Combined flux in latest and established models = 3.47136 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 144 components and 3.47136 Jy ! Inverting map ! Added new window around map position (1.6, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00802793 Jy ! Component: 100 - total flux cleaned = 0.013381 Jy ! Component: 150 - total flux cleaned = 0.0162842 Jy ! Component: 200 - total flux cleaned = 0.0189374 Jy ! Total flux subtracted in 200 components = 0.0189374 Jy ! Clean residual min=-0.007137 max=0.007108 Jy/beam ! Clean residual mean=-0.000030 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 3.4903 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 163 components and 3.4903 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.338 mas, bmaj=3.28 mas, bpa=-77.82 degrees ! Estimated noise=0.358728 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860828 Jy ! Component: 100 - total flux cleaned = 0.0119951 Jy ! Component: 150 - total flux cleaned = 0.0144729 Jy ! Component: 200 - total flux cleaned = 0.0160753 Jy ! Total flux subtracted in 200 components = 0.0160753 Jy ! Clean residual min=-0.009213 max=0.007884 Jy/beam ! Clean residual mean=-0.000037 rms=0.002152 Jy/beam ! Combined flux in latest and established models = 3.50637 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142942 Jy ! Component: 100 - total flux cleaned = 0.00240444 Jy ! Component: 150 - total flux cleaned = 0.00358808 Jy ! Component: 200 - total flux cleaned = 0.0045322 Jy ! Total flux subtracted in 200 components = 0.0045322 Jy ! Clean residual min=-0.008876 max=0.007583 Jy/beam ! Clean residual mean=-0.000033 rms=0.002059 Jy/beam ! Combined flux in latest and established models = 3.5109 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 213 components and 3.5109 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.238 mas, bmaj=1.859 mas, bpa=-74.18 degrees ! Estimated noise=0.305439 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0032511 Jy ! Component: 100 - total flux cleaned = -0.00407069 Jy ! Component: 150 - total flux cleaned = -0.0037151 Jy ! Component: 200 - total flux cleaned = -0.00338229 Jy ! Total flux subtracted in 200 components = -0.00338229 Jy ! Clean residual min=-0.006038 max=0.006368 Jy/beam ! Clean residual mean=-0.000017 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 3.50752 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 227 components and 3.50752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.356527Jy sigma=0.868814 ! Fit after self-cal, rms=0.356267Jy sigma=0.841854 wmodel J0217+7349_X_map.mod ! Writing 227 model components to file: J0217+7349_X_map.mod wobs J0217+7349_X_uvs.fits ! Writing UV FITS file: J0217+7349_X_uvs.fits wwins J0217+7349_X_map.win ! wwins: Wrote 10 windows to J0217+7349_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00049837 Jy ! Component: 100 - total flux cleaned = -0.000117185 Jy ! Component: 150 - total flux cleaned = -0.000609318 Jy ! Component: 200 - total flux cleaned = -0.000607668 Jy ! Component: 250 - total flux cleaned = -0.00014419 Jy ! Component: 300 - total flux cleaned = 0.000217292 Jy ! Component: 350 - total flux cleaned = 0.000393734 Jy ! Component: 400 - total flux cleaned = 0.000569386 Jy ! Component: 450 - total flux cleaned = 0.000909065 Jy ! Component: 500 - total flux cleaned = 0.000990535 Jy ! Component: 550 - total flux cleaned = 0.000907194 Jy ! Component: 600 - total flux cleaned = 0.000826656 Jy ! Component: 650 - total flux cleaned = 0.00067057 Jy ! Component: 700 - total flux cleaned = 0.000670817 Jy ! Component: 750 - total flux cleaned = 0.0003632 Jy ! Component: 800 - total flux cleaned = 0.000288179 Jy ! Component: 850 - total flux cleaned = 0.00013931 Jy ! Component: 900 - total flux cleaned = -7.69574e-06 Jy ! Component: 950 - total flux cleaned = -0.000296802 Jy ! Component: 1000 - total flux cleaned = -0.000438745 Jy ! Component: 1050 - total flux cleaned = -0.000158115 Jy ! Component: 1100 - total flux cleaned = -0.000573743 Jy ! Component: 1150 - total flux cleaned = -0.000641851 Jy ! Component: 1200 - total flux cleaned = -0.000844076 Jy ! Component: 1250 - total flux cleaned = -0.000710288 Jy ! Component: 1300 - total flux cleaned = -0.000907477 Jy ! Component: 1350 - total flux cleaned = -0.000843759 Jy ! Component: 1400 - total flux cleaned = -0.00122969 Jy ! Component: 1450 - total flux cleaned = -0.001228 Jy ! Component: 1500 - total flux cleaned = -0.0011027 Jy ! Component: 1550 - total flux cleaned = -0.00128909 Jy ! Component: 1600 - total flux cleaned = -0.00128866 Jy ! Component: 1650 - total flux cleaned = -0.00122868 Jy ! Component: 1700 - total flux cleaned = -0.00140927 Jy ! Component: 1750 - total flux cleaned = -0.00140989 Jy ! Component: 1800 - total flux cleaned = -0.00158652 Jy ! Component: 1850 - total flux cleaned = -0.00164419 Jy ! Component: 1900 - total flux cleaned = -0.00164384 Jy ! Component: 1950 - total flux cleaned = -0.00135873 Jy ! Component: 2000 - total flux cleaned = -0.0015292 Jy ! Component: 2050 - total flux cleaned = -0.00164113 Jy ! Component: 2100 - total flux cleaned = -0.00147368 Jy ! Component: 2150 - total flux cleaned = -0.00174798 Jy ! Component: 2200 - total flux cleaned = -0.00158452 Jy ! Component: 2250 - total flux cleaned = -0.00153011 Jy ! Component: 2300 - total flux cleaned = -0.00142382 Jy ! Component: 2350 - total flux cleaned = -0.00163529 Jy ! Component: 2400 - total flux cleaned = -0.00168634 Jy ! Component: 2450 - total flux cleaned = -0.00168577 Jy ! Component: 2500 - total flux cleaned = -0.00163424 Jy ! Component: 2550 - total flux cleaned = -0.00168607 Jy ! Component: 2600 - total flux cleaned = -0.00153435 Jy ! Component: 2650 - total flux cleaned = -0.00183404 Jy ! Component: 2700 - total flux cleaned = -0.00163529 Jy ! Component: 2750 - total flux cleaned = -0.00183282 Jy ! Component: 2800 - total flux cleaned = -0.00193019 Jy ! Component: 2850 - total flux cleaned = -0.00193015 Jy ! Component: 2900 - total flux cleaned = -0.00178631 Jy ! Component: 2950 - total flux cleaned = -0.00207096 Jy ! Component: 3000 - total flux cleaned = -0.00183545 Jy ! Component: 3050 - total flux cleaned = -0.00183561 Jy ! Component: 3100 - total flux cleaned = -0.00178967 Jy ! Component: 3150 - total flux cleaned = -0.00211069 Jy ! Component: 3200 - total flux cleaned = -0.00215613 Jy ! Component: 3250 - total flux cleaned = -0.00193074 Jy ! Component: 3300 - total flux cleaned = -0.00197516 Jy ! Component: 3350 - total flux cleaned = -0.00215257 Jy ! Component: 3400 - total flux cleaned = -0.00215273 Jy ! Component: 3450 - total flux cleaned = -0.00215257 Jy ! Component: 3500 - total flux cleaned = -0.00211002 Jy ! Component: 3550 - total flux cleaned = -0.0023679 Jy ! Component: 3600 - total flux cleaned = -0.0022832 Jy ! Component: 3650 - total flux cleaned = -0.00257882 Jy ! Component: 3700 - total flux cleaned = -0.0025782 Jy ! Component: 3750 - total flux cleaned = -0.0024535 Jy ! Component: 3800 - total flux cleaned = -0.00278361 Jy ! Component: 3850 - total flux cleaned = -0.00286491 Jy ! Component: 3900 - total flux cleaned = -0.00294594 Jy ! Component: 3950 - total flux cleaned = -0.00302684 Jy ! Component: 4000 - total flux cleaned = -0.00306668 Jy ! Component: 4050 - total flux cleaned = -0.00326592 Jy ! Total flux subtracted in 4096 components = -0.00338389 Jy ! Clean residual min=-0.002245 max=0.002608 Jy/beam ! Clean residual mean=-0.000007 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 3.50414 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 547 components and 3.50414 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0217+7349_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.238 x 1.859 at -74.18 degrees (North through East) ! Clean map min=-0.0062054 max=2.4221 Jy/beam ! Writing clean map to FITS file: .//J0217+7349_X_map.fits wmodel .//J0217+7349_X_map.mod ! Writing 547 model components to file: .//J0217+7349_X_map.mod wobs .//J0217+7349_X_uvs.fits ! Writing UV FITS file: .//J0217+7349_X_uvs.fits wwins .//J0217+7349_X_map.win ! wwins: Wrote 11 windows to .//J0217+7349_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.42211 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0007383 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0914452 0.0914452 0.18289 0.365781 0.731561 1.46312 2.92625 5.85249 11.705 23.41 46.8199 93.6399 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.422 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3280.65 quit ! Quitting program ! Log file .//J0217+7349_X_dfm.log closed on Sun Jan 19 23:49:33 2020