! Started logfile: .//J0051-0650_X_dfm.log on Sun Jan 19 23:44:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs .//J0051-0650_X_uvm.fits ! Reading UV FITS file: .//J0051-0650_X_uvm.fits ! AN table 1: 17 integrations on 6 of 6 possible baselines. ! AN table 2: 17 integrations on 21 of 21 possible baselines. ! AN table 3: 19 integrations on 15 of 15 possible baselines. ! AN table 4: 21 integrations on 6 of 6 possible baselines. ! AN table 5: 66 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.660813 visibilities/baseline/integration-bin. ! Found source: J0051-0650 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 17160 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0051-0650_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 142 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 142 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 142 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 142 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 142 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 142 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 142 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 1 telescope corrections were flagged in sub-array 2. ! A total of 24 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 142 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.301533Jy sigma=25.796698 ! Fit after self-cal, rms=0.260177Jy sigma=5.187011 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8499 mas, bmaj=2.281 mas, bpa=-7.721 degrees ! Estimated noise=0.4083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.578199 Jy ! Component: 100 - total flux cleaned = 0.71388 Jy ! Total flux subtracted in 100 components = 0.71388 Jy ! Clean residual min=-0.023848 max=0.049947 Jy/beam ! Clean residual mean=-0.000034 rms=0.005766 Jy/beam ! Combined flux in latest and established models = 0.713881 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.713881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.161772Jy sigma=3.062319 ! Fit after self-cal, rms=0.161578Jy sigma=3.060188 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0559695 Jy ! Component: 100 - total flux cleaned = 0.0884708 Jy ! Total flux subtracted in 100 components = 0.0884708 Jy ! Clean residual min=-0.022641 max=0.040218 Jy/beam ! Clean residual mean=-0.000025 rms=0.004479 Jy/beam ! Combined flux in latest and established models = 0.802351 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 0.802351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.125552Jy sigma=2.382729 ! Fit after self-cal, rms=0.125265Jy sigma=2.377092 ! Inverting map ! Added new window around map position (-2.6, 2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0389496 Jy ! Component: 100 - total flux cleaned = 0.0625328 Jy ! Total flux subtracted in 100 components = 0.0625328 Jy ! Clean residual min=-0.020154 max=0.024726 Jy/beam ! Clean residual mean=-0.000017 rms=0.003643 Jy/beam ! Combined flux in latest and established models = 0.864884 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.864884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.101247Jy sigma=1.907472 ! Fit after self-cal, rms=0.100086Jy sigma=1.885889 ! Inverting map ! Added new window around map position (-1.4, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0237425 Jy ! Component: 100 - total flux cleaned = 0.0410548 Jy ! Total flux subtracted in 100 components = 0.0410548 Jy ! Clean residual min=-0.017475 max=0.021029 Jy/beam ! Clean residual mean=-0.000012 rms=0.003184 Jy/beam ! Combined flux in latest and established models = 0.905939 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.905939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.088749Jy sigma=1.668852 ! Fit after self-cal, rms=0.088204Jy sigma=1.659166 ! Inverting map ! Added new window around map position (3.2, -4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191895 Jy ! Component: 100 - total flux cleaned = 0.0330664 Jy ! Total flux subtracted in 100 components = 0.0330664 Jy ! Clean residual min=-0.016145 max=0.015511 Jy/beam ! Clean residual mean=-0.000008 rms=0.002856 Jy/beam ! Combined flux in latest and established models = 0.939005 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 53 components and 0.939005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.080289Jy sigma=1.499853 ! Fit after self-cal, rms=0.080060Jy sigma=1.496461 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.185 mas, bmaj=2.931 mas, bpa=-6.2 degrees ! Estimated noise=0.277307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214485 Jy ! Component: 100 - total flux cleaned = 0.0371331 Jy ! Component: 150 - total flux cleaned = 0.0490951 Jy ! Component: 200 - total flux cleaned = 0.0584309 Jy ! Total flux subtracted in 200 components = 0.0584309 Jy ! Clean residual min=-0.016525 max=0.013895 Jy/beam ! Clean residual mean=-0.000012 rms=0.003381 Jy/beam ! Combined flux in latest and established models = 0.997436 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 77 components and 0.997436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.071357Jy sigma=1.336593 ! Fit after self-cal, rms=0.071174Jy sigma=1.333553 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.185 x 2.931 at -6.2 degrees (North through East) ! Clean map min=-0.015659 max=0.7534 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.03 NL 0.95 OV 1.15 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 KP 1.05 LA 1.06 ! NL 0.98 OV 1.09 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.96 HN 1.03 NL 0.92 ! OV 1.05 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.08 KP 1.02 OV 1.05 PT 0.94 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 HN 1.05 KP 1.02 LA 1.00 ! MK 1.01 NL 0.98 OV 1.02 PT 0.94 ! SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.05 NL 0.95 OV 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 KP 1.05 LA 1.05 ! NL 0.98 OV 1.10 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.95 HN 1.01 NL 0.93 ! OV 1.05 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.10 KP 1.01 OV 1.06 PT 0.94 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 HN 1.06 KP 1.01 LA 1.00 ! MK 1.01 NL 0.98 OV 1.01 PT 0.94 ! SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.03 NL 0.94 OV 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.00 KP 1.04 LA 1.05 ! NL 0.98 OV 1.09 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.95 HN 1.04 NL 0.91 ! OV 1.06 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.10 KP 1.01 OV 1.08 PT 0.94 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 HN 1.05 KP 1.02 LA 1.00 ! MK 1.00 NL 0.99 OV 1.00 PT 0.94 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.05 NL 0.92 OV 1.15 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 KP 1.05 LA 1.04 ! NL 0.98 OV 1.09 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.95 HN 1.03 NL 0.91 ! OV 1.05 PT 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.11 KP 1.01 OV 1.07 PT 0.93 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 HN 1.04 KP 1.02 LA 0.99 ! MK 1.01 NL 0.99 OV 1.01 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 HN 1.03 NL 0.94 OV 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.99 KP 1.04 LA 1.04 ! NL 0.97 OV 1.08 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.93 HN 1.01 NL 0.91 ! OV 1.05 PT 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.10 KP 1.00 OV 1.05 PT 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 HN 1.03 KP 1.01 LA 0.99 ! MK 1.01 NL 0.98 OV 1.00 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 1.00 NL 0.95 OV 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.98 KP 1.03 LA 1.04 ! NL 0.97 OV 1.08 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.93 HN 1.00 NL 0.91 ! OV 1.05 PT 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.09 KP 1.01 OV 1.07 PT 0.93 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 HN 1.01 KP 1.01 LA 0.99 ! MK 1.01 NL 0.98 OV 1.00 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.03 NL 0.94 OV 1.12 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.97 KP 1.04 LA 1.04 ! NL 0.97 OV 1.09 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.94 HN 1.00 NL 0.90 ! OV 1.04 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.11 KP 0.99 OV 1.07 PT 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 HN 1.02 KP 1.00 LA 0.99 ! MK 1.02 NL 1.00 OV 0.99 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 1.02 NL 0.93 OV 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.98 KP 1.05 LA 1.03 ! NL 0.97 OV 1.09 PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.94 HN 1.00 NL 0.91 ! OV 1.04 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.09 KP 1.00 OV 1.07 PT 0.93 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 HN 1.01 KP 1.01 LA 0.99 ! MK 1.01 NL 0.99 OV 1.00 PT 0.93 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.071174Jy sigma=1.333553 ! Fit after self-cal, rms=0.054270Jy sigma=0.988437 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.188 mas, bmaj=2.931 mas, bpa=-6.182 degrees ! Estimated noise=0.276823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188967 Jy ! Component: 100 - total flux cleaned = -0.00388682 Jy ! Component: 150 - total flux cleaned = -0.00517925 Jy ! Component: 200 - total flux cleaned = -0.00572157 Jy ! Total flux subtracted in 200 components = -0.00572157 Jy ! Clean residual min=-0.007746 max=0.007977 Jy/beam ! Clean residual mean=0.000010 rms=0.001794 Jy/beam ! Combined flux in latest and established models = 0.991714 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.991715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.052602Jy sigma=0.956138 ! Fit after self-cal, rms=0.052445Jy sigma=0.953304 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.052445Jy sigma=0.953304 ! Fit after self-cal, rms=0.046164Jy sigma=0.846524 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.189 mas, bmaj=2.928 mas, bpa=-6.066 degrees ! Estimated noise=0.277261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00439027 Jy ! Component: 100 - total flux cleaned = -0.00521476 Jy ! Component: 150 - total flux cleaned = -0.00559917 Jy ! Component: 200 - total flux cleaned = -0.00592204 Jy ! Total flux subtracted in 200 components = -0.00592204 Jy ! Clean residual min=-0.005552 max=0.006154 Jy/beam ! Clean residual mean=0.000007 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 0.985793 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 112 components and 0.985793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.045500Jy sigma=0.834283 ! Fit after self-cal, rms=0.045469Jy sigma=0.833767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000246737 Jy ! Component: 100 - total flux cleaned = -0.000439142 Jy ! Component: 150 - total flux cleaned = -0.00038111 Jy ! Component: 200 - total flux cleaned = -0.00043698 Jy ! Total flux subtracted in 200 components = -0.00043698 Jy ! Clean residual min=-0.005335 max=0.006127 Jy/beam ! Clean residual mean=0.000006 rms=0.001447 Jy/beam ! Combined flux in latest and established models = 0.985356 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 118 components and 0.985355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.045303Jy sigma=0.830631 ! Fit after self-cal, rms=0.045294Jy sigma=0.830516 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.045294Jy sigma=0.830516 ! Fit after self-cal, rms=0.041584Jy sigma=0.753259 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.188 mas, bmaj=2.929 mas, bpa=-6.109 degrees ! Estimated noise=0.2772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00363857 Jy ! Component: 100 - total flux cleaned = -0.004522 Jy ! Component: 150 - total flux cleaned = -0.00511193 Jy ! Component: 200 - total flux cleaned = -0.00547166 Jy ! Total flux subtracted in 200 components = -0.00547166 Jy ! Clean residual min=-0.004446 max=0.006052 Jy/beam ! Clean residual mean=0.000001 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.979884 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 133 components and 0.979884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041058Jy sigma=0.745191 ! Fit after self-cal, rms=0.041037Jy sigma=0.744848 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.4, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358313 Jy ! Component: 100 - total flux cleaned = 0.00382492 Jy ! Component: 150 - total flux cleaned = 0.00355087 Jy ! Component: 200 - total flux cleaned = 0.00323142 Jy ! Total flux subtracted in 200 components = 0.00323142 Jy ! Clean residual min=-0.003746 max=0.005068 Jy/beam ! Clean residual mean=0.000003 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.983115 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 154 components and 0.983115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040117Jy sigma=0.727863 ! Fit after self-cal, rms=0.040053Jy sigma=0.726725 ! Inverting map ! Added new window around map position (-11.2, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00505102 Jy ! Component: 100 - total flux cleaned = 0.0069768 Jy ! Component: 150 - total flux cleaned = 0.00785184 Jy ! Component: 200 - total flux cleaned = 0.00835204 Jy ! Total flux subtracted in 200 components = 0.00835204 Jy ! Clean residual min=-0.003071 max=0.003175 Jy/beam ! Clean residual mean=0.000008 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.991467 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 192 components and 0.991467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039279Jy sigma=0.710215 ! Fit after self-cal, rms=0.039215Jy sigma=0.708990 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039215Jy sigma=0.708990 ! Fit after self-cal, rms=0.038896Jy sigma=0.704096 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.508 mas, bmaj=4.444 mas, bpa=9.433 degrees ! Estimated noise=0.316292 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000788815 Jy ! Component: 100 - total flux cleaned = 0.00124326 Jy ! Component: 150 - total flux cleaned = 0.00162283 Jy ! Component: 200 - total flux cleaned = 0.00194533 Jy ! Total flux subtracted in 200 components = 0.00194533 Jy ! Clean residual min=-0.003241 max=0.003776 Jy/beam ! Clean residual mean=0.000011 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.993412 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 224 components and 0.993412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038509Jy sigma=0.696720 ! Fit after self-cal, rms=0.038475Jy sigma=0.696100 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988988 Jy ! Component: 100 - total flux cleaned = 0.00133728 Jy ! Component: 150 - total flux cleaned = 0.00152206 Jy ! Component: 200 - total flux cleaned = 0.00157853 Jy ! Total flux subtracted in 200 components = 0.00157853 Jy ! Clean residual min=-0.003135 max=0.003458 Jy/beam ! Clean residual mean=0.000012 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.994991 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 235 components and 0.994991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038329Jy sigma=0.693405 ! Fit after self-cal, rms=0.038314Jy sigma=0.693147 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.188 mas, bmaj=2.928 mas, bpa=-6.108 degrees ! Estimated noise=0.277067 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.188 x 2.928 at -6.108 degrees (North through East) ! Clean map min=-0.004767 max=0.75084 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038314Jy sigma=0.693147 ! Fit after self-cal, rms=0.033892Jy sigma=0.611268 ! Inverting map and beam ! Estimated beam: bmin=1.188 mas, bmaj=2.927 mas, bpa=-6.094 degrees ! Estimated noise=0.277245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000743877 Jy ! Component: 100 - total flux cleaned = -0.000557633 Jy ! Component: 150 - total flux cleaned = -0.00044644 Jy ! Component: 200 - total flux cleaned = -0.000293863 Jy ! Total flux subtracted in 200 components = -0.000293863 Jy ! Clean residual min=-0.002376 max=0.002294 Jy/beam ! Clean residual mean=0.000005 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.994697 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 258 components and 0.994697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033664Jy sigma=0.607135 ! Fit after self-cal, rms=0.033660Jy sigma=0.607006 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434421 Jy ! Component: 100 - total flux cleaned = 0.000481891 Jy ! Component: 150 - total flux cleaned = 0.000659522 Jy ! Component: 200 - total flux cleaned = 0.000785491 Jy ! Total flux subtracted in 200 components = 0.000785491 Jy ! Clean residual min=-0.002327 max=0.002197 Jy/beam ! Clean residual mean=0.000006 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.995482 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 266 components and 0.995482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033544Jy sigma=0.604805 ! Fit after self-cal, rms=0.033541Jy sigma=0.604739 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033541Jy sigma=0.604739 ! Fit after self-cal, rms=0.033490Jy sigma=0.603873 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8522 mas, bmaj=2.273 mas, bpa=-7.578 degrees ! Estimated noise=0.409301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.579085 Jy ! Component: 100 - total flux cleaned = 0.718647 Jy ! Component: 150 - total flux cleaned = 0.77547 Jy ! Component: 200 - total flux cleaned = 0.81433 Jy ! Total flux subtracted in 200 components = 0.81433 Jy ! Clean residual min=-0.011471 max=0.022114 Jy/beam ! Clean residual mean=-0.000019 rms=0.002869 Jy/beam ! Combined flux in latest and established models = 0.814331 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.814331 Jy ! Inverting map and beam ! Estimated beam: bmin=1.188 mas, bmaj=2.927 mas, bpa=-6.111 degrees ! Estimated noise=0.277158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469972 Jy ! Component: 100 - total flux cleaned = 0.0765968 Jy ! Component: 150 - total flux cleaned = 0.0983068 Jy ! Component: 200 - total flux cleaned = 0.114782 Jy ! Total flux subtracted in 200 components = 0.114782 Jy ! Clean residual min=-0.006655 max=0.011214 Jy/beam ! Clean residual mean=-0.000029 rms=0.002254 Jy/beam ! Combined flux in latest and established models = 0.929113 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 68 components and 0.929113 Jy ! Inverting map ! Added new window around map position (1.8, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013009 Jy ! Component: 100 - total flux cleaned = 0.0230728 Jy ! Component: 150 - total flux cleaned = 0.03117 Jy ! Component: 200 - total flux cleaned = 0.037754 Jy ! Total flux subtracted in 200 components = 0.037754 Jy ! Clean residual min=-0.004815 max=0.005671 Jy/beam ! Clean residual mean=-0.000010 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.966866 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 102 components and 0.966867 Jy ! Inverting map ! Added new window around map position (-3.2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00597253 Jy ! Component: 100 - total flux cleaned = 0.0106115 Jy ! Component: 150 - total flux cleaned = 0.014487 Jy ! Component: 200 - total flux cleaned = 0.0173913 Jy ! Total flux subtracted in 200 components = 0.0173913 Jy ! Clean residual min=-0.003787 max=0.003002 Jy/beam ! Clean residual mean=-0.000001 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.984258 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 140 components and 0.984258 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.508 mas, bmaj=4.442 mas, bpa=9.417 degrees ! Estimated noise=0.316484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037397 Jy ! Component: 100 - total flux cleaned = 0.00551919 Jy ! Component: 150 - total flux cleaned = 0.00634687 Jy ! Component: 200 - total flux cleaned = 0.0070892 Jy ! Total flux subtracted in 200 components = 0.0070892 Jy ! Clean residual min=-0.003477 max=0.003419 Jy/beam ! Clean residual mean=0.000005 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.991347 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669884 Jy ! Component: 100 - total flux cleaned = 0.00120138 Jy ! Component: 150 - total flux cleaned = 0.00168799 Jy ! Component: 200 - total flux cleaned = 0.00207172 Jy ! Total flux subtracted in 200 components = 0.00207172 Jy ! Clean residual min=-0.003233 max=0.003208 Jy/beam ! Clean residual mean=0.000007 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.993419 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 202 components and 0.993419 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.188 mas, bmaj=2.927 mas, bpa=-6.111 degrees ! Estimated noise=0.277158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110392 Jy ! Component: 100 - total flux cleaned = -0.000881514 Jy ! Component: 150 - total flux cleaned = -0.000676555 Jy ! Component: 200 - total flux cleaned = -0.000483015 Jy ! Total flux subtracted in 200 components = -0.000483015 Jy ! Clean residual min=-0.002870 max=0.002535 Jy/beam ! Clean residual mean=0.000004 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.992936 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 228 components and 0.992936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.033897Jy sigma=0.612044 ! Fit after self-cal, rms=0.033663Jy sigma=0.607650 wmodel J0051-0650_X_map.mod ! Writing 228 model components to file: J0051-0650_X_map.mod wobs J0051-0650_X_uvs.fits ! Writing UV FITS file: J0051-0650_X_uvs.fits wwins J0051-0650_X_map.win ! wwins: Wrote 8 windows to J0051-0650_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000438167 Jy ! Component: 100 - total flux cleaned = -0.000697394 Jy ! Component: 150 - total flux cleaned = -0.000859524 Jy ! Component: 200 - total flux cleaned = -0.00101333 Jy ! Component: 250 - total flux cleaned = -0.000833598 Jy ! Component: 300 - total flux cleaned = -0.00073026 Jy ! Component: 350 - total flux cleaned = -0.000630058 Jy ! Component: 400 - total flux cleaned = -0.000598574 Jy ! Component: 450 - total flux cleaned = -0.00056727 Jy ! Component: 500 - total flux cleaned = -0.000381535 Jy ! Component: 550 - total flux cleaned = -0.000442464 Jy ! Component: 600 - total flux cleaned = -0.000471256 Jy ! Component: 650 - total flux cleaned = -0.000412664 Jy ! Component: 700 - total flux cleaned = -0.00041255 Jy ! Component: 750 - total flux cleaned = -0.000328918 Jy ! Component: 800 - total flux cleaned = -0.000301371 Jy ! Component: 850 - total flux cleaned = -0.00030155 Jy ! Component: 900 - total flux cleaned = -0.000327995 Jy ! Component: 950 - total flux cleaned = -0.00038009 Jy ! Component: 1000 - total flux cleaned = -0.000431473 Jy ! Component: 1050 - total flux cleaned = -0.000482045 Jy ! Component: 1100 - total flux cleaned = -0.000580642 Jy ! Component: 1150 - total flux cleaned = -0.000507642 Jy ! Component: 1200 - total flux cleaned = -0.000532112 Jy ! Component: 1250 - total flux cleaned = -0.000627082 Jy ! Component: 1300 - total flux cleaned = -0.000510091 Jy ! Component: 1350 - total flux cleaned = -0.000625187 Jy ! Component: 1400 - total flux cleaned = -0.000625386 Jy ! Component: 1450 - total flux cleaned = -0.000648147 Jy ! Component: 1500 - total flux cleaned = -0.000692272 Jy ! Component: 1550 - total flux cleaned = -0.000713685 Jy ! Component: 1600 - total flux cleaned = -0.000734889 Jy ! Component: 1650 - total flux cleaned = -0.000755913 Jy ! Component: 1700 - total flux cleaned = -0.000735843 Jy ! Component: 1750 - total flux cleaned = -0.000777017 Jy ! Component: 1800 - total flux cleaned = -0.000838405 Jy ! Component: 1850 - total flux cleaned = -0.000878628 Jy ! Component: 1900 - total flux cleaned = -0.000878651 Jy ! Component: 1950 - total flux cleaned = -0.000859492 Jy ! Component: 2000 - total flux cleaned = -0.000955759 Jy ! Component: 2050 - total flux cleaned = -0.000898359 Jy ! Component: 2100 - total flux cleaned = -0.000860438 Jy ! Component: 2150 - total flux cleaned = -0.000934999 Jy ! Component: 2200 - total flux cleaned = -0.000843001 Jy ! Component: 2250 - total flux cleaned = -0.000843173 Jy ! Component: 2300 - total flux cleaned = -0.000861415 Jy ! Component: 2350 - total flux cleaned = -0.000879261 Jy ! Component: 2400 - total flux cleaned = -0.000861896 Jy ! Component: 2450 - total flux cleaned = -0.000792498 Jy ! Component: 2500 - total flux cleaned = -0.000792516 Jy ! Component: 2550 - total flux cleaned = -0.000741279 Jy ! Component: 2600 - total flux cleaned = -0.000757976 Jy ! Component: 2650 - total flux cleaned = -0.000641385 Jy ! Component: 2700 - total flux cleaned = -0.000592018 Jy ! Component: 2750 - total flux cleaned = -0.000543248 Jy ! Component: 2800 - total flux cleaned = -0.000478571 Jy ! Component: 2850 - total flux cleaned = -0.000430688 Jy ! Component: 2900 - total flux cleaned = -0.000399105 Jy ! Component: 2950 - total flux cleaned = -0.000320452 Jy ! Component: 3000 - total flux cleaned = -0.000211842 Jy ! Component: 3050 - total flux cleaned = -0.000104777 Jy ! Component: 3100 - total flux cleaned = -0.000150467 Jy ! Component: 3150 - total flux cleaned = -9.01597e-05 Jy ! Component: 3200 - total flux cleaned = -4.5528e-05 Jy ! Component: 3250 - total flux cleaned = 1.36321e-05 Jy ! Component: 3300 - total flux cleaned = 5.73701e-05 Jy ! Component: 3350 - total flux cleaned = 4.26132e-05 Jy ! Component: 3400 - total flux cleaned = 0.000114777 Jy ! Component: 3450 - total flux cleaned = 0.000100445 Jy ! Component: 3500 - total flux cleaned = 0.000114586 Jy ! Component: 3550 - total flux cleaned = 0.000198928 Jy ! Component: 3600 - total flux cleaned = 0.000240691 Jy ! Component: 3650 - total flux cleaned = 0.000268229 Jy ! Component: 3700 - total flux cleaned = 0.000268391 Jy ! Component: 3750 - total flux cleaned = 0.00032277 Jy ! Component: 3800 - total flux cleaned = 0.000336181 Jy ! Component: 3850 - total flux cleaned = 0.000402904 Jy ! Component: 3900 - total flux cleaned = 0.000389668 Jy ! Component: 3950 - total flux cleaned = 0.000455626 Jy ! Component: 4000 - total flux cleaned = 0.000546915 Jy ! Component: 4050 - total flux cleaned = 0.000521151 Jy ! Total flux subtracted in 4096 components = 0.000572502 Jy ! Clean residual min=-0.000641 max=0.000676 Jy/beam ! Clean residual mean=0.000004 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.993508 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 530 components and 0.993508 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0051-0650_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.188 x 2.927 at -6.111 degrees (North through East) ! Clean map min=-0.0026542 max=0.75884 Jy/beam ! Writing clean map to FITS file: .//J0051-0650_X_map.fits wmodel .//J0051-0650_X_map.mod ! Writing 530 model components to file: .//J0051-0650_X_map.mod wobs .//J0051-0650_X_uvs.fits ! Writing UV FITS file: .//J0051-0650_X_uvs.fits wwins .//J0051-0650_X_map.win ! wwins: Wrote 9 windows to .//J0051-0650_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.758837 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000251254 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0993312 0.0993312 0.198662 0.397325 0.794649 1.5893 3.1786 6.35719 12.7144 25.4288 50.8576 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.758 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3020.2 quit ! Quitting program ! Log file .//J0051-0650_X_dfm.log closed on Sun Jan 19 23:44:52 2020