! Started logfile: .//J0040+4050_C_dfm.log on Sun Jan 19 23:44:03 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J0040+4050_C_uvm.fits
! Reading UV FITS file: .//J0040+4050_C_uvm.fits
! AN table 1: 92 integrations on 15 of 15 possible baselines.
! AN table 2: 92 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.98913 visibilities/baseline/integration-bin.
! Found source: J0040+4050
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 76 lines of history.
! 
! Reading 26208 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0040+4050_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 96 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.001030Jy  sigma=21.637636
! Fit after  self-cal, rms=0.983555Jy  sigma=21.271364
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.492 mas, bmaj=4.504 mas, bpa=-58.91 degrees
! Estimated noise=0.451176 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013159 Jy
! Component: 100  -  total flux cleaned = 0.0157467 Jy
! Total flux subtracted in 100 components = 0.0157467 Jy
! Clean residual min=-0.001634 max=0.001760 Jy/beam
! Clean residual mean=-0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0157468 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0157468 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032258Jy  sigma=0.651294
! Fit after  self-cal, rms=0.030635Jy  sigma=0.613735
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00311517 Jy
! Component: 100  -  total flux cleaned = 0.00328923 Jy
! Total flux subtracted in 100 components = 0.00328923 Jy
! Clean residual min=-0.001493 max=0.001682 Jy/beam
! Clean residual mean=-0.000001 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.019036 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 19 components and 0.019036 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030313Jy  sigma=0.608206
! Fit after  self-cal, rms=0.030293Jy  sigma=0.608018
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.232 mas, bmaj=4.759 mas, bpa=-59.01 degrees
! Estimated noise=0.207859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000557313 Jy
! Component: 100  -  total flux cleaned = 0.000581432 Jy
! Component: 150  -  total flux cleaned = 0.000547189 Jy
! Component: 200  -  total flux cleaned = 0.000533619 Jy
! Total flux subtracted in 200 components = 0.000533619 Jy
! Clean residual min=-0.000838 max=0.000972 Jy/beam
! Clean residual mean=-0.000001 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.0195696 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 36 components and 0.0195696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030255Jy  sigma=0.607665
! Fit after  self-cal, rms=0.030239Jy  sigma=0.607558
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.232 x 4.759 at -59.01 degrees (North through East)
! Clean map  min=-0.00085766  max=0.019819 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.83     HN        0.82     KP        1.16     
!   OV        0.86     PT        0.81     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        0.86     HN        0.89     KP        1.03     
!   NL        1.13     OV        0.97     PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.84     HN        0.81     KP        0.96     
!   OV        1.06     PT        0.85     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.13     FD        0.95     HN        0.84     KP        1.10     
!   NL        1.03     OV        1.15     PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.92     HN        0.88     KP        1.07     
!   OV        0.89     PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     FD        1.01     HN        0.99     KP        1.05     
!   NL        1.09     OV        1.01     PT        1.16     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.94     HN        0.89     KP        1.04     
!   OV        0.99     PT        0.90     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    FD        0.93     HN        0.93     KP        1.08     
!   NL        1.07     OV        0.85     PT        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.00     HN        0.79     KP        1.06     
!   OV        1.06     PT        0.89     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.07     HN        0.99     KP        1.13     
!   NL        1.13     OV        0.99     PT        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        0.90     HN        0.85     KP        1.08     
!   OV        1.05     PT        1.07     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.19     FD        0.85     HN        1.01     KP        1.06     
!   NL        1.14     OV        0.96     PT        1.06     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.01     HN        0.81     KP        1.03     
!   OV        1.07     PT        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.21     FD        1.02     HN        1.05     KP        1.12     
!   NL        1.08     OV        0.93     PT        1.06     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        0.93     KP        1.08     
!   OV        0.94     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.03     HN        0.99     KP        1.14     
!   NL        1.12     OV        0.99     PT        0.98     
! 
! 
! Fit before self-cal, rms=0.030239Jy  sigma=0.607558
! Fit after  self-cal, rms=0.029265Jy  sigma=0.604457
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.178 mas, bmaj=4.792 mas, bpa=-60.84 degrees
! Estimated noise=0.20656 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.35419e-05 Jy
! Component: 100  -  total flux cleaned = 8.82192e-05 Jy
! Component: 150  -  total flux cleaned = 8.44829e-05 Jy
! Component: 200  -  total flux cleaned = 7.83506e-05 Jy
! Total flux subtracted in 200 components = 7.83506e-05 Jy
! Clean residual min=-0.000436 max=0.000482 Jy/beam
! Clean residual mean=-0.000000 rms=0.000114 Jy/beam
! Combined flux in latest and established models = 0.019648 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 44 components and 0.019648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029264Jy  sigma=0.604433
! Fit after  self-cal, rms=0.029289Jy  sigma=0.603664
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029289Jy  sigma=0.603664
! Fit after  self-cal, rms=0.029483Jy  sigma=0.603439
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.156 mas, bmaj=4.79 mas, bpa=-61.03 degrees
! Estimated noise=0.206791 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.17319e-05 Jy
! Component: 100  -  total flux cleaned = 7.61815e-05 Jy
! Component: 150  -  total flux cleaned = 6.98363e-05 Jy
! Component: 200  -  total flux cleaned = 6.12304e-05 Jy
! Total flux subtracted in 200 components = 6.12304e-05 Jy
! Clean residual min=-0.000414 max=0.000491 Jy/beam
! Clean residual mean=-0.000000 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.0197092 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 0.0197092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029481Jy  sigma=0.603414
! Fit after  self-cal, rms=0.029510Jy  sigma=0.603217
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.6, -11.7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00042646 Jy
! Component: 100  -  total flux cleaned = 0.000541937 Jy
! Component: 150  -  total flux cleaned = 0.000615351 Jy
! Component: 200  -  total flux cleaned = 0.000609629 Jy
! Total flux subtracted in 200 components = 0.000609629 Jy
! Clean residual min=-0.000423 max=0.000403 Jy/beam
! Clean residual mean=-0.000000 rms=0.000097 Jy/beam
! Combined flux in latest and established models = 0.0203188 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 68 components and 0.0203188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029502Jy  sigma=0.603045
! Fit after  self-cal, rms=0.029501Jy  sigma=0.602946
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029501Jy  sigma=0.602946
! Fit after  self-cal, rms=0.029523Jy  sigma=0.602912
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.149 mas, bmaj=4.792 mas, bpa=-61.07 degrees
! Estimated noise=0.206316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251243 Jy
! Component: 100  -  total flux cleaned = 0.000349176 Jy
! Component: 150  -  total flux cleaned = 0.000389922 Jy
! Component: 200  -  total flux cleaned = 0.000395366 Jy
! Total flux subtracted in 200 components = 0.000395366 Jy
! Clean residual min=-0.000420 max=0.000370 Jy/beam
! Clean residual mean=-0.000000 rms=0.000095 Jy/beam
! Combined flux in latest and established models = 0.0207142 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 81 components and 0.0207142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029519Jy  sigma=0.602819
! Fit after  self-cal, rms=0.029534Jy  sigma=0.602740
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000218081 Jy
! Component: 100  -  total flux cleaned = 0.00025156 Jy
! Component: 150  -  total flux cleaned = 0.000252205 Jy
! Component: 200  -  total flux cleaned = 0.000242525 Jy
! Total flux subtracted in 200 components = 0.000242525 Jy
! Clean residual min=-0.000413 max=0.000355 Jy/beam
! Clean residual mean=-0.000000 rms=0.000093 Jy/beam
! Combined flux in latest and established models = 0.0209567 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 84 components and 0.0209567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029531Jy  sigma=0.602680
! Fit after  self-cal, rms=0.029534Jy  sigma=0.602660
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029534Jy  sigma=0.602660
! Fit after  self-cal, rms=0.029528Jy  sigma=0.602649
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.343 mas, bmaj=5.233 mas, bpa=-61.86 degrees
! Estimated noise=0.218007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00015596 Jy
! Component: 100  -  total flux cleaned = 0.000190487 Jy
! Component: 150  -  total flux cleaned = 0.000190774 Jy
! Component: 200  -  total flux cleaned = 0.000182532 Jy
! Total flux subtracted in 200 components = 0.000182532 Jy
! Clean residual min=-0.000398 max=0.000333 Jy/beam
! Clean residual mean=-0.000001 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.0211392 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 96 components and 0.0211392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029525Jy  sigma=0.602609
! Fit after  self-cal, rms=0.029525Jy  sigma=0.602485
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.16024e-05 Jy
! Component: 100  -  total flux cleaned = 9.68677e-05 Jy
! Component: 150  -  total flux cleaned = 8.41754e-05 Jy
! Component: 200  -  total flux cleaned = 7.2957e-05 Jy
! Total flux subtracted in 200 components = 7.2957e-05 Jy
! Clean residual min=-0.000381 max=0.000323 Jy/beam
! Clean residual mean=-0.000001 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.0212122 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 116 components and 0.0212122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029524Jy  sigma=0.602457
! Fit after  self-cal, rms=0.029525Jy  sigma=0.602427
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.146 mas, bmaj=4.794 mas, bpa=-61.09 degrees
! Estimated noise=0.206017 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.146 x 4.794 at -61.09 degrees (North through East)
! Clean map  min=-0.00040468  max=0.019827 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.441 mas, bmaj=4.512 mas, bpa=-60.89 degrees
! Estimated noise=0.439662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151858 Jy
! Component: 100  -  total flux cleaned = 0.018491 Jy
! Component: 150  -  total flux cleaned = 0.0192837 Jy
! Component: 200  -  total flux cleaned = 0.0197907 Jy
! Total flux subtracted in 200 components = 0.0197907 Jy
! Clean residual min=-0.001012 max=0.001122 Jy/beam
! Clean residual mean=-0.000000 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.0197907 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0197907 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.146 mas, bmaj=4.794 mas, bpa=-61.09 degrees
! Estimated noise=0.206017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000818492 Jy
! Component: 100  -  total flux cleaned = 0.00114351 Jy
! Component: 150  -  total flux cleaned = 0.00132227 Jy
! Component: 200  -  total flux cleaned = 0.00142411 Jy
! Total flux subtracted in 200 components = 0.00142411 Jy
! Clean residual min=-0.000495 max=0.000420 Jy/beam
! Clean residual mean=-0.000000 rms=0.000119 Jy/beam
! Combined flux in latest and established models = 0.0212148 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 62 components and 0.0212148 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.343 mas, bmaj=5.233 mas, bpa=-61.86 degrees
! Estimated noise=0.218007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000294269 Jy
! Component: 100  -  total flux cleaned = 0.000330927 Jy
! Component: 150  -  total flux cleaned = 0.000331357 Jy
! Component: 200  -  total flux cleaned = 0.000321806 Jy
! Total flux subtracted in 200 components = 0.000321806 Jy
! Clean residual min=-0.000388 max=0.000365 Jy/beam
! Clean residual mean=-0.000001 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.0215366 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.64069e-05 Jy
! Component: 100  -  total flux cleaned = -3.07798e-05 Jy
! Component: 150  -  total flux cleaned = -3.71286e-05 Jy
! Component: 200  -  total flux cleaned = -5.46845e-05 Jy
! Total flux subtracted in 200 components = -5.46845e-05 Jy
! Clean residual min=-0.000374 max=0.000339 Jy/beam
! Clean residual mean=-0.000001 rms=0.000103 Jy/beam
! Combined flux in latest and established models = 0.0214819 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 96 components and 0.0214819 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.146 mas, bmaj=4.794 mas, bpa=-61.09 degrees
! Estimated noise=0.206017 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.14146e-05 Jy
! Component: 100  -  total flux cleaned = 6.20577e-05 Jy
! Component: 150  -  total flux cleaned = 4.29693e-05 Jy
! Component: 200  -  total flux cleaned = 2.55833e-05 Jy
! Total flux subtracted in 200 components = 2.55833e-05 Jy
! Clean residual min=-0.000377 max=0.000375 Jy/beam
! Clean residual mean=-0.000001 rms=0.000095 Jy/beam
! Combined flux in latest and established models = 0.0215075 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 109 components and 0.0215075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029527Jy  sigma=0.602466
! Fit after  self-cal, rms=0.029528Jy  sigma=0.602439
wmodel J0040+4050_C_map.mod
! Writing 109 model components to file: J0040+4050_C_map.mod
wobs   J0040+4050_C_uvs.fits
! Writing UV FITS file: J0040+4050_C_uvs.fits
wwins  J0040+4050_C_map.win
! wwins: Wrote 2 windows to J0040+4050_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 2.05798e-05 Jy
! Component: 100  -  total flux cleaned = 4.5042e-05 Jy
! Component: 150  -  total flux cleaned = 7.95662e-05 Jy
! Component: 200  -  total flux cleaned = 7.94144e-05 Jy
! Component: 250  -  total flux cleaned = 7.4255e-05 Jy
! Component: 300  -  total flux cleaned = 6.41689e-05 Jy
! Component: 350  -  total flux cleaned = 4.94263e-05 Jy
! Component: 400  -  total flux cleaned = 5.41034e-05 Jy
! Component: 450  -  total flux cleaned = 5.86699e-05 Jy
! Component: 500  -  total flux cleaned = 7.67019e-05 Jy
! Component: 550  -  total flux cleaned = 0.000107303 Jy
! Component: 600  -  total flux cleaned = 0.00010728 Jy
! Component: 650  -  total flux cleaned = 0.000124024 Jy
! Component: 700  -  total flux cleaned = 0.000132154 Jy
! Component: 750  -  total flux cleaned = 0.000136164 Jy
! Component: 800  -  total flux cleaned = 0.000147913 Jy
! Component: 850  -  total flux cleaned = 0.000132598 Jy
! Component: 900  -  total flux cleaned = 0.000136509 Jy
! Component: 950  -  total flux cleaned = 0.000147605 Jy
! Component: 1000  -  total flux cleaned = 0.000129373 Jy
! Component: 1050  -  total flux cleaned = 0.000136585 Jy
! Component: 1100  -  total flux cleaned = 0.000140192 Jy
! Component: 1150  -  total flux cleaned = 0.000140191 Jy
! Component: 1200  -  total flux cleaned = 0.000147073 Jy
! Component: 1250  -  total flux cleaned = 0.000136794 Jy
! Component: 1300  -  total flux cleaned = 0.000146976 Jy
! Component: 1350  -  total flux cleaned = 0.000143662 Jy
! Component: 1400  -  total flux cleaned = 0.000143657 Jy
! Component: 1450  -  total flux cleaned = 0.000143722 Jy
! Component: 1500  -  total flux cleaned = 0.000134079 Jy
! Component: 1550  -  total flux cleaned = 0.000130871 Jy
! Component: 1600  -  total flux cleaned = 0.000112015 Jy
! Component: 1650  -  total flux cleaned = 0.000115158 Jy
! Component: 1700  -  total flux cleaned = 9.97521e-05 Jy
! Component: 1750  -  total flux cleaned = 9.06139e-05 Jy
! Component: 1800  -  total flux cleaned = 7.85709e-05 Jy
! Component: 1850  -  total flux cleaned = 6.95617e-05 Jy
! Component: 1900  -  total flux cleaned = 5.17408e-05 Jy
! Component: 1950  -  total flux cleaned = 5.17166e-05 Jy
! Component: 2000  -  total flux cleaned = 4.87368e-05 Jy
! Component: 2050  -  total flux cleaned = 3.70982e-05 Jy
! Component: 2100  -  total flux cleaned = 3.13527e-05 Jy
! Component: 2150  -  total flux cleaned = 3.13415e-05 Jy
! Component: 2200  -  total flux cleaned = 3.698e-05 Jy
! Component: 2250  -  total flux cleaned = 2.85561e-05 Jy
! Component: 2300  -  total flux cleaned = 2.5759e-05 Jy
! Component: 2350  -  total flux cleaned = 2.02082e-05 Jy
! Component: 2400  -  total flux cleaned = 2.29797e-05 Jy
! Component: 2450  -  total flux cleaned = 2.02331e-05 Jy
! Component: 2500  -  total flux cleaned = 1.47966e-05 Jy
! Component: 2550  -  total flux cleaned = 1.47859e-05 Jy
! Component: 2600  -  total flux cleaned = 1.47763e-05 Jy
! Component: 2650  -  total flux cleaned = 4.11272e-06 Jy
! Component: 2700  -  total flux cleaned = 9.44551e-06 Jy
! Component: 2750  -  total flux cleaned = 9.43627e-06 Jy
! Component: 2800  -  total flux cleaned = 4.18499e-06 Jy
! Component: 2850  -  total flux cleaned = -1.14951e-05 Jy
! Component: 2900  -  total flux cleaned = -1.41048e-05 Jy
! Component: 2950  -  total flux cleaned = -3.47599e-05 Jy
! Component: 3000  -  total flux cleaned = -3.47814e-05 Jy
! Component: 3050  -  total flux cleaned = -5.26821e-05 Jy
! Component: 3100  -  total flux cleaned = -5.26786e-05 Jy
! Component: 3150  -  total flux cleaned = -7.54354e-05 Jy
! Component: 3200  -  total flux cleaned = -7.54312e-05 Jy
! Component: 3250  -  total flux cleaned = -7.04355e-05 Jy
! Component: 3300  -  total flux cleaned = -7.29606e-05 Jy
! Component: 3350  -  total flux cleaned = -9.77665e-05 Jy
! Component: 3400  -  total flux cleaned = -9.28155e-05 Jy
! Component: 3450  -  total flux cleaned = -0.000100201 Jy
! Component: 3500  -  total flux cleaned = -0.000105102 Jy
! Component: 3550  -  total flux cleaned = -0.000112403 Jy
! Component: 3600  -  total flux cleaned = -0.000119683 Jy
! Component: 3650  -  total flux cleaned = -0.000129336 Jy
! Component: 3700  -  total flux cleaned = -0.000141343 Jy
! Component: 3750  -  total flux cleaned = -0.000148505 Jy
! Component: 3800  -  total flux cleaned = -0.000160411 Jy
! Component: 3850  -  total flux cleaned = -0.0001628 Jy
! Component: 3900  -  total flux cleaned = -0.000184071 Jy
! Component: 3950  -  total flux cleaned = -0.000198179 Jy
! Component: 4000  -  total flux cleaned = -0.000209892 Jy
! Component: 4050  -  total flux cleaned = -0.000219214 Jy
! Total flux subtracted in 4096 components = -0.000226186 Jy
! Clean residual min=-0.000117 max=0.000135 Jy/beam
! Clean residual mean=-0.000000 rms=0.000043 Jy/beam
! Combined flux in latest and established models = 0.0212813 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 402 components and 0.0212814 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J0040+4050_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.146 x 4.794 at -61.09 degrees (North through East)
! Clean map  min=-0.00031531  max=0.01984 Jy/beam
! Writing clean map to FITS file: .//J0040+4050_C_map.fits
wmodel .//J0040+4050_C_map.mod
! Writing 402 model components to file: .//J0040+4050_C_map.mod
wobs   .//J0040+4050_C_uvs.fits
! Writing UV FITS file: .//J0040+4050_C_uvs.fits
wwins  .//J0040+4050_C_map.win
! wwins: Wrote 3 windows to .//J0040+4050_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0198398 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 4.33307e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.655209 0.655209 1.31042 2.62084 5.24167 10.4833 20.9667 41.9334 83.8668
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.019 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  457.869 
quit
! Quitting program
! Log file .//J0040+4050_C_dfm.log closed on Sun Jan 19 23:44:08 2020