! Started logfile: .//J0038-0122_X_dfm.log on Sun Jan 19 23:43:58 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     .//J0038-0122_X_uvm.fits
! Reading UV FITS file: .//J0038-0122_X_uvm.fits
! AN table 1: 17 integrations on 28 of 28 possible baselines.
! AN table 2: 16 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.969212 visibilities/baseline/integration-bin.
! Found source: J0038-0122
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 76 lines of history.
! 
! Reading 6296 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0038-0122_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.006433Jy  sigma=20.022907
! Fit after  self-cal, rms=0.911385Jy  sigma=18.162269
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.429 mas, bmaj=3.83 mas, bpa=-6.816 degrees
! Estimated noise=0.609623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.069043 Jy
! Component: 100  -  total flux cleaned = 0.0842999 Jy
! Total flux subtracted in 100 components = 0.0842999 Jy
! Clean residual min=-0.004798 max=0.005307 Jy/beam
! Clean residual mean=-0.000009 rms=0.001228 Jy/beam
! Combined flux in latest and established models = 0.0842999 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0842999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038720Jy  sigma=0.717819
! Fit after  self-cal, rms=0.038714Jy  sigma=0.717687
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.7 mas, bmaj=3.942 mas, bpa=-6.387 degrees
! Estimated noise=0.453744 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00531673 Jy
! Component: 100  -  total flux cleaned = 0.00819921 Jy
! Component: 150  -  total flux cleaned = 0.00961582 Jy
! Component: 200  -  total flux cleaned = 0.0100587 Jy
! Total flux subtracted in 200 components = 0.0100587 Jy
! Clean residual min=-0.003915 max=0.004139 Jy/beam
! Clean residual mean=-0.000007 rms=0.001116 Jy/beam
! Combined flux in latest and established models = 0.0943586 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 36 components and 0.0943586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037889Jy  sigma=0.703604
! Fit after  self-cal, rms=0.037878Jy  sigma=0.703513
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.7 x 3.942 at -6.387 degrees (North through East)
! Clean map  min=-0.0038831  max=0.088685 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        0.93     KP        1.21     
!   LA        1.07     NL        0.90     OV        1.06     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.89     HN        1.00     KP        1.01     
!   NL        0.86     OV        1.08     PT        0.88     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.00     KP        1.25     
!   LA        1.00     NL        0.99     OV        1.13     PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        0.84     HN        1.12     KP        0.95     
!   NL        0.94     OV        1.07     PT        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.99     HN        1.07     KP        1.31     
!   LA        0.94     NL        0.94     OV        1.16     PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        0.85     HN        1.12     KP        0.97     
!   NL        0.92     OV        1.10     PT        0.88     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.98     HN        1.03     KP        1.14     
!   LA        0.98     NL        0.95     OV        1.06     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.82     HN        1.06     KP        1.04     
!   NL        0.93     OV        1.05     PT        0.89     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.05     KP        1.27     
!   LA        0.98     NL        0.93     OV        1.13     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        0.84     HN        1.05     KP        0.97     
!   NL        0.84     OV        1.13     PT        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.95     HN        1.03     KP        1.29     
!   LA        1.03     NL        0.96     OV        1.06     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.85     HN        1.11     KP        0.93     
!   NL        0.83     OV        1.08     PT        0.89     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.99     HN        1.02     KP        1.20     
!   LA        1.02     NL        0.93     OV        1.12     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        0.81     HN        1.05     KP        0.98     
!   NL        0.87     OV        1.08     PT        0.85     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.05     KP        1.22     
!   LA        1.05     NL        0.91     OV        1.08     PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.82     HN        1.08     KP        0.99     
!   NL        0.93     OV        1.06     PT        0.87     
! 
! 
! Fit before self-cal, rms=0.037878Jy  sigma=0.703513
! Fit after  self-cal, rms=0.036055Jy  sigma=0.656504
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.727 mas, bmaj=3.916 mas, bpa=-6.132 degrees
! Estimated noise=0.453188 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.95416e-05 Jy
! Component: 100  -  total flux cleaned = -8.95564e-05 Jy
! Component: 150  -  total flux cleaned = -0.000166307 Jy
! Component: 200  -  total flux cleaned = -0.000192441 Jy
! Total flux subtracted in 200 components = -0.000192441 Jy
! Clean residual min=-0.001480 max=0.001414 Jy/beam
! Clean residual mean=0.000000 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.0941661 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 50 components and 0.0941662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036038Jy  sigma=0.656145
! Fit after  self-cal, rms=0.036089Jy  sigma=0.655771
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036089Jy  sigma=0.655771
! Fit after  self-cal, rms=0.036065Jy  sigma=0.655732
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.729 mas, bmaj=3.917 mas, bpa=-6.144 degrees
! Estimated noise=0.452826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117943 Jy
! Component: 100  -  total flux cleaned = -0.000170775 Jy
! Component: 150  -  total flux cleaned = -0.000218246 Jy
! Component: 200  -  total flux cleaned = -0.000250844 Jy
! Total flux subtracted in 200 components = -0.000250844 Jy
! Clean residual min=-0.001510 max=0.001407 Jy/beam
! Clean residual mean=0.000000 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.0939153 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 55 components and 0.0939153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036057Jy  sigma=0.655569
! Fit after  self-cal, rms=0.036057Jy  sigma=0.655567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.57163e-05 Jy
! Component: 100  -  total flux cleaned = -7.37038e-05 Jy
! Component: 150  -  total flux cleaned = -9.07885e-05 Jy
! Component: 200  -  total flux cleaned = -0.000115065 Jy
! Total flux subtracted in 200 components = -0.000115065 Jy
! Clean residual min=-0.001508 max=0.001414 Jy/beam
! Clean residual mean=0.000000 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.0938002 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 62 components and 0.0938002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036053Jy  sigma=0.655494
! Fit after  self-cal, rms=0.036053Jy  sigma=0.655491
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036053Jy  sigma=0.655491
! Fit after  self-cal, rms=0.036040Jy  sigma=0.655460
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.731 mas, bmaj=3.918 mas, bpa=-6.157 degrees
! Estimated noise=0.452709 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00017391 Jy
! Component: 100  -  total flux cleaned = -0.000191809 Jy
! Component: 150  -  total flux cleaned = -0.000217552 Jy
! Component: 200  -  total flux cleaned = -0.000233526 Jy
! Total flux subtracted in 200 components = -0.000233526 Jy
! Clean residual min=-0.001529 max=0.001403 Jy/beam
! Clean residual mean=0.000000 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.0935667 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 68 components and 0.0935667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036036Jy  sigma=0.655381
! Fit after  self-cal, rms=0.036036Jy  sigma=0.655380
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.2635e-05 Jy
! Component: 100  -  total flux cleaned = -4.67299e-05 Jy
! Component: 150  -  total flux cleaned = -5.98109e-05 Jy
! Component: 200  -  total flux cleaned = -7.20953e-05 Jy
! Total flux subtracted in 200 components = -7.20953e-05 Jy
! Clean residual min=-0.001535 max=0.001405 Jy/beam
! Clean residual mean=0.000000 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.0934946 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 72 components and 0.0934946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036033Jy  sigma=0.655337
! Fit after  self-cal, rms=0.036033Jy  sigma=0.655336
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036033Jy  sigma=0.655336
! Fit after  self-cal, rms=0.036035Jy  sigma=0.655319
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.411 mas, bmaj=4.017 mas, bpa=-4.083 degrees
! Estimated noise=0.478184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000233376 Jy
! Component: 100  -  total flux cleaned = -0.000292242 Jy
! Component: 150  -  total flux cleaned = -0.000316394 Jy
! Component: 200  -  total flux cleaned = -0.000329228 Jy
! Total flux subtracted in 200 components = -0.000329228 Jy
! Clean residual min=-0.001506 max=0.001428 Jy/beam
! Clean residual mean=0.000000 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.0931654 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 76 components and 0.0931654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036034Jy  sigma=0.655280
! Fit after  self-cal, rms=0.036034Jy  sigma=0.655277
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.03926e-05 Jy
! Component: 100  -  total flux cleaned = -4.17129e-05 Jy
! Component: 150  -  total flux cleaned = -4.87066e-05 Jy
! Component: 200  -  total flux cleaned = -5.19998e-05 Jy
! Total flux subtracted in 200 components = -5.19998e-05 Jy
! Clean residual min=-0.001500 max=0.001435 Jy/beam
! Clean residual mean=0.000000 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.0931134 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 82 components and 0.0931133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036033Jy  sigma=0.655263
! Fit after  self-cal, rms=0.036032Jy  sigma=0.655262
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.733 mas, bmaj=3.919 mas, bpa=-6.165 degrees
! Estimated noise=0.452697 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.733 x 3.919 at -6.165 degrees (North through East)
! Clean map  min=-0.001523  max=0.088401 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.466 mas, bmaj=3.775 mas, bpa=-6.434 degrees
! Estimated noise=0.604564 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0684438 Jy
! Component: 100  -  total flux cleaned = 0.0834385 Jy
! Component: 150  -  total flux cleaned = 0.0874824 Jy
! Component: 200  -  total flux cleaned = 0.0895184 Jy
! Total flux subtracted in 200 components = 0.0895184 Jy
! Clean residual min=-0.002036 max=0.001576 Jy/beam
! Clean residual mean=-0.000001 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.0895185 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0895185 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.733 mas, bmaj=3.919 mas, bpa=-6.165 degrees
! Estimated noise=0.452697 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164057 Jy
! Component: 100  -  total flux cleaned = 0.00255483 Jy
! Component: 150  -  total flux cleaned = 0.00285459 Jy
! Component: 200  -  total flux cleaned = 0.00304534 Jy
! Total flux subtracted in 200 components = 0.00304534 Jy
! Clean residual min=-0.001552 max=0.001395 Jy/beam
! Clean residual mean=-0.000000 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.0925638 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 0.0925638 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.411 mas, bmaj=4.017 mas, bpa=-4.083 degrees
! Estimated noise=0.478184 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000287276 Jy
! Component: 100  -  total flux cleaned = 0.000368409 Jy
! Component: 150  -  total flux cleaned = 0.000437617 Jy
! Component: 200  -  total flux cleaned = 0.000489387 Jy
! Total flux subtracted in 200 components = 0.000489387 Jy
! Clean residual min=-0.001505 max=0.001426 Jy/beam
! Clean residual mean=0.000000 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.0930532 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.09854e-05 Jy
! Component: 100  -  total flux cleaned = 3.78728e-05 Jy
! Component: 150  -  total flux cleaned = 4.4469e-05 Jy
! Component: 200  -  total flux cleaned = 5.70049e-05 Jy
! Total flux subtracted in 200 components = 5.70049e-05 Jy
! Clean residual min=-0.001510 max=0.001423 Jy/beam
! Clean residual mean=0.000000 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.0931102 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 54 components and 0.0931102 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.733 mas, bmaj=3.919 mas, bpa=-6.165 degrees
! Estimated noise=0.452697 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.37824e-05 Jy
! Component: 100  -  total flux cleaned = 4.96406e-05 Jy
! Component: 150  -  total flux cleaned = 5.62348e-05 Jy
! Component: 200  -  total flux cleaned = 6.82002e-05 Jy
! Total flux subtracted in 200 components = 6.82002e-05 Jy
! Clean residual min=-0.001547 max=0.001390 Jy/beam
! Clean residual mean=0.000000 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.0931784 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 60 components and 0.0931784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036037Jy  sigma=0.655408
! Fit after  self-cal, rms=0.036035Jy  sigma=0.655383
wmodel J0038-0122_X_map.mod
! Writing 60 model components to file: J0038-0122_X_map.mod
wobs   J0038-0122_X_uvs.fits
! Writing UV FITS file: J0038-0122_X_uvs.fits
wwins  J0038-0122_X_map.win
! wwins: Wrote 1 windows to J0038-0122_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00027341 Jy
! Component: 100  -  total flux cleaned = -0.000427075 Jy
! Component: 150  -  total flux cleaned = -0.000510212 Jy
! Component: 200  -  total flux cleaned = -0.000569983 Jy
! Component: 250  -  total flux cleaned = -0.000682927 Jy
! Component: 300  -  total flux cleaned = -0.000737156 Jy
! Component: 350  -  total flux cleaned = -0.000703076 Jy
! Component: 400  -  total flux cleaned = -0.000736393 Jy
! Component: 450  -  total flux cleaned = -0.000736148 Jy
! Component: 500  -  total flux cleaned = -0.000768044 Jy
! Component: 550  -  total flux cleaned = -0.00076845 Jy
! Component: 600  -  total flux cleaned = -0.000828233 Jy
! Component: 650  -  total flux cleaned = -0.000871878 Jy
! Component: 700  -  total flux cleaned = -0.000914455 Jy
! Component: 750  -  total flux cleaned = -0.00098381 Jy
! Component: 800  -  total flux cleaned = -0.000983245 Jy
! Component: 850  -  total flux cleaned = -0.000996541 Jy
! Component: 900  -  total flux cleaned = -0.0010095 Jy
! Component: 950  -  total flux cleaned = -0.000996912 Jy
! Component: 1000  -  total flux cleaned = -0.000997411 Jy
! Component: 1050  -  total flux cleaned = -0.000997353 Jy
! Component: 1100  -  total flux cleaned = -0.000960885 Jy
! Component: 1150  -  total flux cleaned = -0.000960995 Jy
! Component: 1200  -  total flux cleaned = -0.0009374 Jy
! Component: 1250  -  total flux cleaned = -0.000914137 Jy
! Component: 1300  -  total flux cleaned = -0.000868615 Jy
! Component: 1350  -  total flux cleaned = -0.000790258 Jy
! Component: 1400  -  total flux cleaned = -0.000757377 Jy
! Component: 1450  -  total flux cleaned = -0.000670649 Jy
! Component: 1500  -  total flux cleaned = -0.000617302 Jy
! Component: 1550  -  total flux cleaned = -0.000585657 Jy
! Component: 1600  -  total flux cleaned = -0.000554533 Jy
! Component: 1650  -  total flux cleaned = -0.000513497 Jy
! Component: 1700  -  total flux cleaned = -0.000483298 Jy
! Component: 1750  -  total flux cleaned = -0.000493137 Jy
! Component: 1800  -  total flux cleaned = -0.000424051 Jy
! Component: 1850  -  total flux cleaned = -0.000433791 Jy
! Component: 1900  -  total flux cleaned = -0.000424036 Jy
! Component: 1950  -  total flux cleaned = -0.000386143 Jy
! Component: 2000  -  total flux cleaned = -0.000395524 Jy
! Component: 2050  -  total flux cleaned = -0.000377042 Jy
! Component: 2100  -  total flux cleaned = -0.000340497 Jy
! Component: 2150  -  total flux cleaned = -0.000358705 Jy
! Component: 2200  -  total flux cleaned = -0.000322925 Jy
! Component: 2250  -  total flux cleaned = -0.000314144 Jy
! Component: 2300  -  total flux cleaned = -0.000287909 Jy
! Component: 2350  -  total flux cleaned = -0.00026199 Jy
! Component: 2400  -  total flux cleaned = -0.000262025 Jy
! Component: 2450  -  total flux cleaned = -0.000261989 Jy
! Component: 2500  -  total flux cleaned = -0.00022845 Jy
! Component: 2550  -  total flux cleaned = -0.000220101 Jy
! Component: 2600  -  total flux cleaned = -0.000187238 Jy
! Component: 2650  -  total flux cleaned = -0.000170974 Jy
! Component: 2700  -  total flux cleaned = -0.000178987 Jy
! Component: 2750  -  total flux cleaned = -0.000155022 Jy
! Component: 2800  -  total flux cleaned = -0.000139212 Jy
! Component: 2850  -  total flux cleaned = -0.000123495 Jy
! Component: 2900  -  total flux cleaned = -0.000115682 Jy
! Component: 2950  -  total flux cleaned = -0.000108038 Jy
! Component: 3000  -  total flux cleaned = -0.000100389 Jy
! Component: 3050  -  total flux cleaned = -6.2708e-05 Jy
! Component: 3100  -  total flux cleaned = -5.53755e-05 Jy
! Component: 3150  -  total flux cleaned = -9.25464e-05 Jy
! Component: 3200  -  total flux cleaned = -8.51384e-05 Jy
! Component: 3250  -  total flux cleaned = -8.51188e-05 Jy
! Component: 3300  -  total flux cleaned = -8.51656e-05 Jy
! Component: 3350  -  total flux cleaned = -0.000106848 Jy
! Component: 3400  -  total flux cleaned = -0.000106871 Jy
! Component: 3450  -  total flux cleaned = -0.000128239 Jy
! Component: 3500  -  total flux cleaned = -0.00012823 Jy
! Component: 3550  -  total flux cleaned = -0.000128261 Jy
! Component: 3600  -  total flux cleaned = -0.000128303 Jy
! Component: 3650  -  total flux cleaned = -0.000128336 Jy
! Component: 3700  -  total flux cleaned = -0.00010769 Jy
! Component: 3750  -  total flux cleaned = -0.0001214 Jy
! Component: 3800  -  total flux cleaned = -0.00010787 Jy
! Component: 3850  -  total flux cleaned = -0.000121489 Jy
! Component: 3900  -  total flux cleaned = -0.00012822 Jy
! Component: 3950  -  total flux cleaned = -0.000134949 Jy
! Component: 4000  -  total flux cleaned = -0.00014165 Jy
! Component: 4050  -  total flux cleaned = -0.000161448 Jy
! Total flux subtracted in 4096 components = -0.000135186 Jy
! Clean residual min=-0.000343 max=0.000428 Jy/beam
! Clean residual mean=0.000000 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.0930432 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 367 components and 0.0930432 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J0038-0122_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.733 x 3.919 at -6.165 degrees (North through East)
! Clean map  min=-0.00082701  max=0.088383 Jy/beam
! Writing clean map to FITS file: .//J0038-0122_X_map.fits
wmodel .//J0038-0122_X_map.mod
! Writing 367 model components to file: .//J0038-0122_X_map.mod
wobs   .//J0038-0122_X_uvs.fits
! Writing UV FITS file: .//J0038-0122_X_uvs.fits
wwins  .//J0038-0122_X_map.win
! wwins: Wrote 2 windows to .//J0038-0122_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0883825 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000121341 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.411872 0.411872 0.823745 1.64749 3.29498 6.58996 13.1799 26.3598 52.7197
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.088 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  728.38 
quit
! Quitting program
! Log file .//J0038-0122_X_dfm.log closed on Sun Jan 19 23:44:02 2020