! Started logfile: .//J0030+7037_C_dfm.log on Sun Jan 19 23:42:46 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J0030+7037_C_uvm.fits
! Reading UV FITS file: .//J0030+7037_C_uvm.fits
! AN table 1: 33 integrations on 28 of 28 possible baselines.
! AN table 2: 16 integrations on 6 of 6 possible baselines.
! AN table 3: 16 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.872222 visibilities/baseline/integration-bin.
! Found source: J0030+7037
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 76 lines of history.
! 
! Reading 8792 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0030+7037_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 64 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.154968Jy  sigma=21.673045
! Fit after  self-cal, rms=0.455700Jy  sigma=8.554492
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.199 mas, bmaj=5.884 mas, bpa=89.81 degrees
! Estimated noise=0.703376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.416967 Jy
! Component: 100  -  total flux cleaned = 0.514336 Jy
! Total flux subtracted in 100 components = 0.514336 Jy
! Clean residual min=-0.016906 max=0.038331 Jy/beam
! Clean residual mean=0.000180 rms=0.004359 Jy/beam
! Combined flux in latest and established models = 0.514336 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.514336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086133Jy  sigma=1.490842
! Fit after  self-cal, rms=0.086044Jy  sigma=1.489738
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0424066 Jy
! Component: 100  -  total flux cleaned = 0.0645688 Jy
! Total flux subtracted in 100 components = 0.0645688 Jy
! Clean residual min=-0.008825 max=0.011978 Jy/beam
! Clean residual mean=0.000077 rms=0.002003 Jy/beam
! Combined flux in latest and established models = 0.578905 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 16 components and 0.578905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.058822Jy  sigma=0.892265
! Fit after  self-cal, rms=0.058509Jy  sigma=0.887154
! Inverting map 
! Added new window around map position (-5.7, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146766 Jy
! Component: 100  -  total flux cleaned = 0.0245078 Jy
! Total flux subtracted in 100 components = 0.0245078 Jy
! Clean residual min=-0.005297 max=0.005621 Jy/beam
! Clean residual mean=0.000040 rms=0.001344 Jy/beam
! Combined flux in latest and established models = 0.603413 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.603413 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.053409Jy  sigma=0.767092
! Fit after  self-cal, rms=0.053261Jy  sigma=0.764614
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.672 mas, bmaj=6.151 mas, bpa=88.63 degrees
! Estimated noise=0.430932 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00972032 Jy
! Component: 100  -  total flux cleaned = 0.0156515 Jy
! Component: 150  -  total flux cleaned = 0.0191839 Jy
! Component: 200  -  total flux cleaned = 0.0207926 Jy
! Total flux subtracted in 200 components = 0.0207926 Jy
! Clean residual min=-0.002884 max=0.003303 Jy/beam
! Clean residual mean=0.000022 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.624205 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 54 components and 0.624205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.051233Jy  sigma=0.716251
! Fit after  self-cal, rms=0.051148Jy  sigma=0.714277
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.672 x 6.151 at 88.63 degrees (North through East)
! Clean map  min=-0.0029126  max=0.55087 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.00     
!   LA        0.98     NL        1.00     OV        1.00     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    HN        0.00*    OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     HN        0.97     KP        0.99     NL        0.99     
!   OV        0.99     PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.99     KP        1.00     
!   LA        0.99     NL        1.00     OV        1.00     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    HN        0.00*    OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     HN        0.96     KP        1.00     NL        1.00     
!   OV        0.98     PT        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        1.00     
!   LA        0.99     NL        0.99     OV        0.99     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    HN        0.00*    OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.97     HN        0.97     KP        1.02     NL        1.05     
!   OV        0.98     PT        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.00     KP        1.00     
!   LA        1.00     NL        1.00     OV        1.00     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     HN        1.28     OV        0.98     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    HN        0.96     KP        0.97     NL        0.99     
!   OV        0.96     PT        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        1.00     
!   LA        1.00     NL        1.00     OV        1.00     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     HN        1.12     OV        1.00     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     HN        0.98     KP        0.98     NL        0.99     
!   OV        0.99     PT        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.99     NL        1.00     OV        1.00     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     HN        1.12     OV        0.99     PT        1.03     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.01     HN        0.99     KP        0.99     NL        1.00     
!   OV        0.97     PT        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        1.01     NL        1.01     OV        1.00     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.99     HN        1.09     OV        1.00     PT        1.03     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.01     HN        0.96     KP        1.00     NL        1.01     
!   OV        0.98     PT        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        1.00     
!   LA        1.00     NL        1.00     OV        1.00     PT        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     HN        1.11     OV        1.01     PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     HN        0.98     KP        0.99     NL        1.00     
!   OV        0.99     PT        1.00     
! 
! 
! Fit before self-cal, rms=0.051148Jy  sigma=0.714277
! Fit after  self-cal, rms=0.048449Jy  sigma=0.652261
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.677 mas, bmaj=6.147 mas, bpa=88.68 degrees
! Estimated noise=0.42976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000497301 Jy
! Component: 100  -  total flux cleaned = 0.000636723 Jy
! Component: 150  -  total flux cleaned = 0.000797483 Jy
! Component: 200  -  total flux cleaned = 0.000940333 Jy
! Total flux subtracted in 200 components = 0.000940333 Jy
! Clean residual min=-0.001631 max=0.002218 Jy/beam
! Clean residual mean=0.000000 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.625146 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 71 components and 0.625146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048265Jy  sigma=0.648527
! Fit after  self-cal, rms=0.048248Jy  sigma=0.648061
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048248Jy  sigma=0.648061
! Fit after  self-cal, rms=0.048196Jy  sigma=0.646446
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.678 mas, bmaj=6.146 mas, bpa=88.68 degrees
! Estimated noise=0.42996 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000213565 Jy
! Component: 100  -  total flux cleaned = 0.00040302 Jy
! Component: 150  -  total flux cleaned = 0.000477064 Jy
! Component: 200  -  total flux cleaned = 0.000454918 Jy
! Total flux subtracted in 200 components = 0.000454918 Jy
! Clean residual min=-0.001496 max=0.002098 Jy/beam
! Clean residual mean=-0.000000 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.625601 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 89 components and 0.625601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048147Jy  sigma=0.645638
! Fit after  self-cal, rms=0.048143Jy  sigma=0.645521
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-14.7, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189308 Jy
! Component: 100  -  total flux cleaned = 0.00274911 Jy
! Component: 150  -  total flux cleaned = 0.00340439 Jy
! Component: 200  -  total flux cleaned = 0.00379245 Jy
! Total flux subtracted in 200 components = 0.00379245 Jy
! Clean residual min=-0.001357 max=0.001551 Jy/beam
! Clean residual mean=-0.000002 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.629393 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 118 components and 0.629393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048057Jy  sigma=0.643351
! Fit after  self-cal, rms=0.048047Jy  sigma=0.643117
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048047Jy  sigma=0.643117
! Fit after  self-cal, rms=0.047956Jy  sigma=0.641535
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.678 mas, bmaj=6.145 mas, bpa=88.67 degrees
! Estimated noise=0.429988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000897694 Jy
! Component: 100  -  total flux cleaned = 0.00129767 Jy
! Component: 150  -  total flux cleaned = 0.00143391 Jy
! Component: 200  -  total flux cleaned = 0.0015574 Jy
! Total flux subtracted in 200 components = 0.0015574 Jy
! Clean residual min=-0.001249 max=0.001570 Jy/beam
! Clean residual mean=-0.000004 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.63095 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 138 components and 0.63095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047928Jy  sigma=0.640872
! Fit after  self-cal, rms=0.047926Jy  sigma=0.640811
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-36.9, 39).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131938 Jy
! Component: 100  -  total flux cleaned = 0.00183431 Jy
! Component: 150  -  total flux cleaned = 0.00210307 Jy
! Component: 200  -  total flux cleaned = 0.00227962 Jy
! Total flux subtracted in 200 components = 0.00227962 Jy
! Clean residual min=-0.001121 max=0.001335 Jy/beam
! Clean residual mean=-0.000003 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.63323 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 165 components and 0.63323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047873Jy  sigma=0.639802
! Fit after  self-cal, rms=0.047868Jy  sigma=0.639698
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047868Jy  sigma=0.639698
! Fit after  self-cal, rms=0.047854Jy  sigma=0.639604
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.339 mas, bmaj=6.319 mas, bpa=88.08 degrees
! Estimated noise=0.475813 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000829536 Jy
! Component: 100  -  total flux cleaned = 0.00147548 Jy
! Component: 150  -  total flux cleaned = 0.00202623 Jy
! Component: 200  -  total flux cleaned = 0.00246604 Jy
! Total flux subtracted in 200 components = 0.00246604 Jy
! Clean residual min=-0.001120 max=0.001322 Jy/beam
! Clean residual mean=-0.000005 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.635696 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 192 components and 0.635696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047838Jy  sigma=0.639275
! Fit after  self-cal, rms=0.047836Jy  sigma=0.639243
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397855 Jy
! Component: 100  -  total flux cleaned = 0.000553862 Jy
! Component: 150  -  total flux cleaned = 0.000665831 Jy
! Component: 200  -  total flux cleaned = 0.000725933 Jy
! Total flux subtracted in 200 components = 0.000725933 Jy
! Clean residual min=-0.001069 max=0.001306 Jy/beam
! Clean residual mean=-0.000005 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.636422 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 200 components and 0.636422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047828Jy  sigma=0.639062
! Fit after  self-cal, rms=0.047827Jy  sigma=0.639052
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.678 mas, bmaj=6.144 mas, bpa=88.68 degrees
! Estimated noise=0.429993 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.678 x 6.144 at 88.68 degrees (North through East)
! Clean map  min=-0.00097186  max=0.54995 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047827Jy  sigma=0.639052
! Fit after  self-cal, rms=0.044424Jy  sigma=0.566415
! Inverting map and beam 
! Estimated beam: bmin=2.678 mas, bmaj=6.143 mas, bpa=88.68 degrees
! Estimated noise=0.429976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.95598e-05 Jy
! Component: 100  -  total flux cleaned = 5.89123e-05 Jy
! Component: 150  -  total flux cleaned = 2.11696e-05 Jy
! Component: 200  -  total flux cleaned = -1.39786e-05 Jy
! Total flux subtracted in 200 components = -1.39786e-05 Jy
! Clean residual min=-0.000976 max=0.001279 Jy/beam
! Clean residual mean=-0.000002 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.636408 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 219 components and 0.636408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044407Jy  sigma=0.566025
! Fit after  self-cal, rms=0.044407Jy  sigma=0.566014
! Inverting map 
! Added new window around map position (-33.9, 8.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000800475 Jy
! Component: 100  -  total flux cleaned = 0.000778214 Jy
! Component: 150  -  total flux cleaned = 0.000820665 Jy
! Component: 200  -  total flux cleaned = 0.000959116 Jy
! Total flux subtracted in 200 components = 0.000959116 Jy
! Clean residual min=-0.000944 max=0.001117 Jy/beam
! Clean residual mean=-0.000002 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.637367 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 244 components and 0.637367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044362Jy  sigma=0.565254
! Fit after  self-cal, rms=0.044358Jy  sigma=0.565198
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044358Jy  sigma=0.565198
! Fit after  self-cal, rms=0.044360Jy  sigma=0.565129
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.201 mas, bmaj=5.873 mas, bpa=89.81 degrees
! Estimated noise=0.7015 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.415694 Jy
! Component: 100  -  total flux cleaned = 0.513968 Jy
! Component: 150  -  total flux cleaned = 0.556735 Jy
! Component: 200  -  total flux cleaned = 0.579339 Jy
! Total flux subtracted in 200 components = 0.579339 Jy
! Clean residual min=-0.007235 max=0.011657 Jy/beam
! Clean residual mean=0.000072 rms=0.001716 Jy/beam
! Combined flux in latest and established models = 0.579339 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.579339 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.678 mas, bmaj=6.143 mas, bpa=88.68 degrees
! Estimated noise=0.430034 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182271 Jy
! Component: 100  -  total flux cleaned = 0.0291586 Jy
! Component: 150  -  total flux cleaned = 0.0359302 Jy
! Component: 200  -  total flux cleaned = 0.0400969 Jy
! Total flux subtracted in 200 components = 0.0400969 Jy
! Clean residual min=-0.002400 max=0.002479 Jy/beam
! Clean residual mean=0.000020 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.619436 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 39 components and 0.619436 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.339 mas, bmaj=6.319 mas, bpa=88.08 degrees
! Estimated noise=0.475838 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359676 Jy
! Component: 100  -  total flux cleaned = 0.00600027 Jy
! Component: 150  -  total flux cleaned = 0.00810682 Jy
! Component: 200  -  total flux cleaned = 0.00943938 Jy
! Total flux subtracted in 200 components = 0.00943938 Jy
! Clean residual min=-0.001685 max=0.001573 Jy/beam
! Clean residual mean=0.000005 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.628875 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116648 Jy
! Component: 100  -  total flux cleaned = 0.00220727 Jy
! Component: 150  -  total flux cleaned = 0.00318783 Jy
! Component: 200  -  total flux cleaned = 0.00407008 Jy
! Total flux subtracted in 200 components = 0.00407008 Jy
! Clean residual min=-0.001311 max=0.001279 Jy/beam
! Clean residual mean=0.000002 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.632945 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 120 components and 0.632945 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.678 mas, bmaj=6.143 mas, bpa=88.68 degrees
! Estimated noise=0.430034 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000925118 Jy
! Component: 100  -  total flux cleaned = 0.0016055 Jy
! Component: 150  -  total flux cleaned = 0.00210453 Jy
! Component: 200  -  total flux cleaned = 0.0024227 Jy
! Total flux subtracted in 200 components = 0.0024227 Jy
! Clean residual min=-0.001083 max=0.001335 Jy/beam
! Clean residual mean=-0.000000 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.635368 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 144 components and 0.635368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044455Jy  sigma=0.567372
! Fit after  self-cal, rms=0.044443Jy  sigma=0.567145
wmodel J0030+7037_C_map.mod
! Writing 144 model components to file: J0030+7037_C_map.mod
wobs   J0030+7037_C_uvs.fits
! Writing UV FITS file: J0030+7037_C_uvs.fits
wwins  J0030+7037_C_map.win
! wwins: Wrote 5 windows to J0030+7037_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000476512 Jy
! Component: 100  -  total flux cleaned = 0.000477289 Jy
! Component: 150  -  total flux cleaned = 0.000517534 Jy
! Component: 200  -  total flux cleaned = 0.000518378 Jy
! Component: 250  -  total flux cleaned = 0.000537024 Jy
! Component: 300  -  total flux cleaned = 0.000537646 Jy
! Component: 350  -  total flux cleaned = 0.000555077 Jy
! Component: 400  -  total flux cleaned = 0.00057174 Jy
! Component: 450  -  total flux cleaned = 0.000555929 Jy
! Component: 500  -  total flux cleaned = 0.000571423 Jy
! Component: 550  -  total flux cleaned = 0.000586445 Jy
! Component: 600  -  total flux cleaned = 0.000630737 Jy
! Component: 650  -  total flux cleaned = 0.000630572 Jy
! Component: 700  -  total flux cleaned = 0.000673496 Jy
! Component: 750  -  total flux cleaned = 0.000673489 Jy
! Component: 800  -  total flux cleaned = 0.000673653 Jy
! Component: 850  -  total flux cleaned = 0.000727564 Jy
! Component: 900  -  total flux cleaned = 0.000727516 Jy
! Component: 950  -  total flux cleaned = 0.000714638 Jy
! Component: 1000  -  total flux cleaned = 0.000804674 Jy
! Component: 1050  -  total flux cleaned = 0.000792103 Jy
! Component: 1100  -  total flux cleaned = 0.000854813 Jy
! Component: 1150  -  total flux cleaned = 0.000940933 Jy
! Component: 1200  -  total flux cleaned = 0.000964867 Jy
! Component: 1250  -  total flux cleaned = 0.00102503 Jy
! Component: 1300  -  total flux cleaned = 0.00103693 Jy
! Component: 1350  -  total flux cleaned = 0.00109528 Jy
! Component: 1400  -  total flux cleaned = 0.00111821 Jy
! Component: 1450  -  total flux cleaned = 0.00114126 Jy
! Component: 1500  -  total flux cleaned = 0.00123118 Jy
! Component: 1550  -  total flux cleaned = 0.00125346 Jy
! Component: 1600  -  total flux cleaned = 0.00129763 Jy
! Component: 1650  -  total flux cleaned = 0.00133023 Jy
! Component: 1700  -  total flux cleaned = 0.00135162 Jy
! Component: 1750  -  total flux cleaned = 0.00139417 Jy
! Component: 1800  -  total flux cleaned = 0.00142581 Jy
! Component: 1850  -  total flux cleaned = 0.00144667 Jy
! Component: 1900  -  total flux cleaned = 0.00149835 Jy
! Component: 1950  -  total flux cleaned = 0.00153919 Jy
! Component: 2000  -  total flux cleaned = 0.00157953 Jy
! Component: 2050  -  total flux cleaned = 0.00161972 Jy
! Component: 2100  -  total flux cleaned = 0.00169918 Jy
! Component: 2150  -  total flux cleaned = 0.00169892 Jy
! Component: 2200  -  total flux cleaned = 0.0017575 Jy
! Component: 2250  -  total flux cleaned = 0.00179609 Jy
! Component: 2300  -  total flux cleaned = 0.00182498 Jy
! Component: 2350  -  total flux cleaned = 0.00188201 Jy
! Component: 2400  -  total flux cleaned = 0.00191954 Jy
! Component: 2450  -  total flux cleaned = 0.00195677 Jy
! Component: 2500  -  total flux cleaned = 0.00197531 Jy
! Component: 2550  -  total flux cleaned = 0.00203017 Jy
! Component: 2600  -  total flux cleaned = 0.00203018 Jy
! Component: 2650  -  total flux cleaned = 0.00207524 Jy
! Component: 2700  -  total flux cleaned = 0.00209293 Jy
! Component: 2750  -  total flux cleaned = 0.00209303 Jy
! Component: 2800  -  total flux cleaned = 0.00209305 Jy
! Component: 2850  -  total flux cleaned = 0.00213663 Jy
! Component: 2900  -  total flux cleaned = 0.00215388 Jy
! Component: 2950  -  total flux cleaned = 0.00217108 Jy
! Component: 3000  -  total flux cleaned = 0.00217099 Jy
! Component: 3050  -  total flux cleaned = 0.00217929 Jy
! Component: 3100  -  total flux cleaned = 0.0021877 Jy
! Component: 3150  -  total flux cleaned = 0.00220433 Jy
! Component: 3200  -  total flux cleaned = 0.00224537 Jy
! Component: 3250  -  total flux cleaned = 0.00221268 Jy
! Component: 3300  -  total flux cleaned = 0.00224507 Jy
! Component: 3350  -  total flux cleaned = 0.00224502 Jy
! Component: 3400  -  total flux cleaned = 0.00222908 Jy
! Component: 3450  -  total flux cleaned = 0.00226075 Jy
! Component: 3500  -  total flux cleaned = 0.00226858 Jy
! Component: 3550  -  total flux cleaned = 0.00227634 Jy
! Component: 3600  -  total flux cleaned = 0.00228407 Jy
! Component: 3650  -  total flux cleaned = 0.00229947 Jy
! Component: 3700  -  total flux cleaned = 0.00229951 Jy
! Component: 3750  -  total flux cleaned = 0.0023526 Jy
! Component: 3800  -  total flux cleaned = 0.00233749 Jy
! Component: 3850  -  total flux cleaned = 0.00234497 Jy
! Component: 3900  -  total flux cleaned = 0.00236718 Jy
! Component: 3950  -  total flux cleaned = 0.00235243 Jy
! Component: 4000  -  total flux cleaned = 0.0024037 Jy
! Component: 4050  -  total flux cleaned = 0.00240376 Jy
! Total flux subtracted in 4096 components = 0.00239655 Jy
! Clean residual min=-0.000360 max=0.000419 Jy/beam
! Clean residual mean=-0.000002 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.637764 Jy
keep
! Adding 314 model components to the UV plane model.
! The established model now contains 456 components and 0.637764 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J0030+7037_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.678 x 6.143 at 88.68 degrees (North through East)
! Clean map  min=-0.00094564  max=0.55023 Jy/beam
! Writing clean map to FITS file: .//J0030+7037_C_map.fits
wmodel .//J0030+7037_C_map.mod
! Writing 456 model components to file: .//J0030+7037_C_map.mod
wobs   .//J0030+7037_C_uvs.fits
! Writing UV FITS file: .//J0030+7037_C_uvs.fits
wwins  .//J0030+7037_C_map.win
! wwins: Wrote 6 windows to .//J0030+7037_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.550234 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000144819 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0789588 0.0789588 0.157918 0.315835 0.63167 1.26334 2.52668 5.05336 10.1067 20.2135 40.4269 80.8538
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.55 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3799.45 
quit
! Quitting program
! Log file .//J0030+7037_C_dfm.log closed on Sun Jan 19 23:42:51 2020