! Started logfile: .//J0024-1042_C_dfm.log on Sun Jan 19 23:42:27 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J0024-1042_C_uvm.fits
! Reading UV FITS file: .//J0024-1042_C_uvm.fits
! AN table 1: 17 integrations on 15 of 15 possible baselines.
! AN table 2: 17 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.960784 visibilities/baseline/integration-bin.
! Found source: J0024-1042
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 67 lines of history.
! 
! Reading 6664 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0024-1042_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.002218Jy  sigma=19.033900
! Fit after  self-cal, rms=0.973115Jy  sigma=18.483592
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.34 mas, bmaj=3.572 mas, bpa=2.299 degrees
! Estimated noise=0.72352 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0208709 Jy
! Component: 100  -  total flux cleaned = 0.0256827 Jy
! Total flux subtracted in 100 components = 0.0256827 Jy
! Clean residual min=-0.002082 max=0.002260 Jy/beam
! Clean residual mean=0.000001 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.0256827 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0256827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042009Jy  sigma=0.702149
! Fit after  self-cal, rms=0.039932Jy  sigma=0.658486
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00384903 Jy
! Component: 100  -  total flux cleaned = 0.00540059 Jy
! Total flux subtracted in 100 components = 0.00540059 Jy
! Clean residual min=-0.001935 max=0.001779 Jy/beam
! Clean residual mean=0.000000 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.0310833 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 21 components and 0.0310833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039479Jy  sigma=0.650267
! Fit after  self-cal, rms=0.039479Jy  sigma=0.650229
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.633 mas, bmaj=4.132 mas, bpa=2.007 degrees
! Estimated noise=0.500882 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122958 Jy
! Component: 100  -  total flux cleaned = 0.00168254 Jy
! Component: 150  -  total flux cleaned = 0.00175787 Jy
! Component: 200  -  total flux cleaned = 0.00178282 Jy
! Total flux subtracted in 200 components = 0.00178282 Jy
! Clean residual min=-0.001526 max=0.001294 Jy/beam
! Clean residual mean=-0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.0328662 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 0.0328662 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039429Jy  sigma=0.649627
! Fit after  self-cal, rms=0.039423Jy  sigma=0.649582
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.633 x 4.132 at 2.007 degrees (North through East)
! Clean map  min=-0.0014727  max=0.030505 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    NL        0.00*    
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.87     HN        0.89     KP        0.94     LA        1.05     
!   MK        1.08     NL        0.87     OV        0.78     PT        1.06     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    NL        0.00*    
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.83     HN        0.97     KP        1.15     LA        1.06     
!   MK        1.09     NL        0.94     OV        1.09     PT        0.92     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    NL        0.00*    
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     HN        1.01     KP        0.99     LA        1.09     
!   MK        1.08     NL        0.99     OV        1.04     PT        0.99     
!   SC        0.84     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.86     HN        0.91     NL        1.06     
!   OV        0.94     PT        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     HN        1.03     KP        1.03     LA        0.99     
!   MK        0.96     NL        0.98     OV        1.06     PT        0.96     
!   SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.11     HN        0.84     NL        0.82     
!   OV        1.10     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     HN        1.03     KP        0.98     LA        0.95     
!   MK        1.06     NL        0.95     OV        1.08     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        0.96     HN        0.84     NL        1.09     
!   OV        1.09     PT        0.84     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     HN        0.86     KP        0.95     LA        1.02     
!   MK        1.09     NL        1.14     OV        0.98     PT        1.02     
!   SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.05     HN        0.84     NL        1.17     
!   OV        1.14     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.12     HN        0.97     KP        1.01     LA        1.02     
!   MK        1.09     NL        0.91     OV        1.22     PT        1.01     
!   SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.92     HN        0.72     NL        1.16     
!   OV        1.00     PT        1.04     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.39     HN        0.83     KP        0.93     LA        1.04     
!   MK        0.93     NL        0.98     OV        1.07     PT        1.07     
!   SC        0.99     
! 
! 
! Fit before self-cal, rms=0.039423Jy  sigma=0.649582
! Fit after  self-cal, rms=0.038463Jy  sigma=0.645705
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.638 mas, bmaj=4.153 mas, bpa=2.479 degrees
! Estimated noise=0.498943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125731 Jy
! Component: 100  -  total flux cleaned = 7.69041e-05 Jy
! Component: 150  -  total flux cleaned = 7.60514e-05 Jy
! Component: 200  -  total flux cleaned = 6.96387e-05 Jy
! Total flux subtracted in 200 components = 6.96387e-05 Jy
! Clean residual min=-0.001292 max=0.001353 Jy/beam
! Clean residual mean=-0.000001 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.0329358 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 0.0329358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038457Jy  sigma=0.645648
! Fit after  self-cal, rms=0.038505Jy  sigma=0.645106
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038505Jy  sigma=0.645106
! Fit after  self-cal, rms=0.038762Jy  sigma=0.644973
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.639 mas, bmaj=4.15 mas, bpa=2.791 degrees
! Estimated noise=0.499476 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174276 Jy
! Component: 100  -  total flux cleaned = 0.000121931 Jy
! Component: 150  -  total flux cleaned = 8.88781e-05 Jy
! Component: 200  -  total flux cleaned = 7.72653e-05 Jy
! Total flux subtracted in 200 components = 7.72653e-05 Jy
! Clean residual min=-0.001310 max=0.001309 Jy/beam
! Clean residual mean=-0.000001 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.0330131 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 54 components and 0.0330131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038756Jy  sigma=0.644932
! Fit after  self-cal, rms=0.038778Jy  sigma=0.644883
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.80248e-05 Jy
! Component: 100  -  total flux cleaned = -9.93072e-06 Jy
! Component: 150  -  total flux cleaned = -4.12433e-05 Jy
! Component: 200  -  total flux cleaned = -4.60602e-05 Jy
! Total flux subtracted in 200 components = -4.60602e-05 Jy
! Clean residual min=-0.001315 max=0.001291 Jy/beam
! Clean residual mean=-0.000001 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.032967 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 57 components and 0.032967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038776Jy  sigma=0.644853
! Fit after  self-cal, rms=0.038776Jy  sigma=0.644844
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038776Jy  sigma=0.644844
! Fit after  self-cal, rms=0.038844Jy  sigma=0.644811
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.637 mas, bmaj=4.143 mas, bpa=3.107 degrees
! Estimated noise=0.499348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00012708 Jy
! Component: 100  -  total flux cleaned = 9.63904e-05 Jy
! Component: 150  -  total flux cleaned = 7.21809e-05 Jy
! Component: 200  -  total flux cleaned = 5.92205e-05 Jy
! Total flux subtracted in 200 components = 5.92205e-05 Jy
! Clean residual min=-0.001321 max=0.001292 Jy/beam
! Clean residual mean=-0.000001 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0330262 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 58 components and 0.0330262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038840Jy  sigma=0.644799
! Fit after  self-cal, rms=0.038847Jy  sigma=0.644783
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.59422e-06 Jy
! Component: 100  -  total flux cleaned = -1.75107e-05 Jy
! Component: 150  -  total flux cleaned = -3.38093e-05 Jy
! Component: 200  -  total flux cleaned = -3.74154e-05 Jy
! Total flux subtracted in 200 components = -3.74154e-05 Jy
! Clean residual min=-0.001323 max=0.001257 Jy/beam
! Clean residual mean=-0.000001 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.0329888 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 60 components and 0.0329888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038845Jy  sigma=0.644768
! Fit after  self-cal, rms=0.038846Jy  sigma=0.644762
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038846Jy  sigma=0.644762
! Fit after  self-cal, rms=0.038900Jy  sigma=0.644742
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.618 mas, bmaj=7.595 mas, bpa=6.559 degrees
! Estimated noise=0.610243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014347 Jy
! Component: 100  -  total flux cleaned = 0.000147073 Jy
! Component: 150  -  total flux cleaned = 0.000152087 Jy
! Component: 200  -  total flux cleaned = 0.000158454 Jy
! Total flux subtracted in 200 components = 0.000158454 Jy
! Clean residual min=-0.001202 max=0.001340 Jy/beam
! Clean residual mean=-0.000002 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.0331473 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 64 components and 0.0331473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038899Jy  sigma=0.644737
! Fit after  self-cal, rms=0.038904Jy  sigma=0.644728
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.34053e-05 Jy
! Component: 100  -  total flux cleaned = 1.6139e-05 Jy
! Component: 150  -  total flux cleaned = 2.07229e-05 Jy
! Component: 200  -  total flux cleaned = 2.66045e-05 Jy
! Total flux subtracted in 200 components = 2.66045e-05 Jy
! Clean residual min=-0.001201 max=0.001346 Jy/beam
! Clean residual mean=-0.000002 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0331739 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 68 components and 0.0331739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038904Jy  sigma=0.644725
! Fit after  self-cal, rms=0.038906Jy  sigma=0.644719
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.636 mas, bmaj=4.137 mas, bpa=3.41 degrees
! Estimated noise=0.499457 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.636 x 4.137 at 3.41 degrees (North through East)
! Clean map  min=-0.0012778  max=0.030358 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.346 mas, bmaj=3.589 mas, bpa=3.386 degrees
! Estimated noise=0.71655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0229575 Jy
! Component: 100  -  total flux cleaned = 0.028479 Jy
! Component: 150  -  total flux cleaned = 0.030691 Jy
! Component: 200  -  total flux cleaned = 0.0318395 Jy
! Total flux subtracted in 200 components = 0.0318395 Jy
! Clean residual min=-0.001873 max=0.001549 Jy/beam
! Clean residual mean=-0.000000 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.0318395 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0318395 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.636 mas, bmaj=4.137 mas, bpa=3.41 degrees
! Estimated noise=0.499457 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000961079 Jy
! Component: 100  -  total flux cleaned = 0.00118536 Jy
! Component: 150  -  total flux cleaned = 0.00121536 Jy
! Component: 200  -  total flux cleaned = 0.00122733 Jy
! Total flux subtracted in 200 components = 0.00122733 Jy
! Clean residual min=-0.001364 max=0.001189 Jy/beam
! Clean residual mean=-0.000001 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.0330669 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 32 components and 0.0330669 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.618 mas, bmaj=7.595 mas, bpa=6.559 degrees
! Estimated noise=0.610243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0002213 Jy
! Component: 100  -  total flux cleaned = 0.000225118 Jy
! Component: 150  -  total flux cleaned = 0.000225284 Jy
! Component: 200  -  total flux cleaned = 0.000222892 Jy
! Total flux subtracted in 200 components = 0.000222892 Jy
! Clean residual min=-0.001215 max=0.001351 Jy/beam
! Clean residual mean=-0.000003 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0332898 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.6677e-06 Jy
! Component: 100  -  total flux cleaned = -3.7023e-06 Jy
! Component: 150  -  total flux cleaned = -2.231e-06 Jy
! Component: 200  -  total flux cleaned = -2.27879e-06 Jy
! Total flux subtracted in 200 components = -2.27879e-06 Jy
! Clean residual min=-0.001216 max=0.001351 Jy/beam
! Clean residual mean=-0.000003 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0332875 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 46 components and 0.0332875 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.636 mas, bmaj=4.137 mas, bpa=3.41 degrees
! Estimated noise=0.499457 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.51683e-05 Jy
! Component: 100  -  total flux cleaned = -5.64765e-05 Jy
! Component: 150  -  total flux cleaned = -6.99341e-05 Jy
! Component: 200  -  total flux cleaned = -8.89115e-05 Jy
! Total flux subtracted in 200 components = -8.89115e-05 Jy
! Clean residual min=-0.001351 max=0.001203 Jy/beam
! Clean residual mean=-0.000001 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.0331986 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 51 components and 0.0331986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038910Jy  sigma=0.644742
! Fit after  self-cal, rms=0.038907Jy  sigma=0.644718
wmodel J0024-1042_C_map.mod
! Writing 51 model components to file: J0024-1042_C_map.mod
wobs   J0024-1042_C_uvs.fits
! Writing UV FITS file: J0024-1042_C_uvs.fits
wwins  J0024-1042_C_map.win
! wwins: Wrote 1 windows to J0024-1042_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000505981 Jy
! Component: 100  -  total flux cleaned = -0.000804343 Jy
! Component: 150  -  total flux cleaned = -0.000943969 Jy
! Component: 200  -  total flux cleaned = -0.00105795 Jy
! Component: 250  -  total flux cleaned = -0.00114915 Jy
! Component: 300  -  total flux cleaned = -0.00123694 Jy
! Component: 350  -  total flux cleaned = -0.00132171 Jy
! Component: 400  -  total flux cleaned = -0.00140457 Jy
! Component: 450  -  total flux cleaned = -0.00146906 Jy
! Component: 500  -  total flux cleaned = -0.00154741 Jy
! Component: 550  -  total flux cleaned = -0.00162362 Jy
! Component: 600  -  total flux cleaned = -0.00165346 Jy
! Component: 650  -  total flux cleaned = -0.00169777 Jy
! Component: 700  -  total flux cleaned = -0.00172661 Jy
! Component: 750  -  total flux cleaned = -0.00175436 Jy
! Component: 800  -  total flux cleaned = -0.00174055 Jy
! Component: 850  -  total flux cleaned = -0.00175444 Jy
! Component: 900  -  total flux cleaned = -0.0017811 Jy
! Component: 950  -  total flux cleaned = -0.00179425 Jy
! Component: 1000  -  total flux cleaned = -0.00180724 Jy
! Component: 1050  -  total flux cleaned = -0.00184519 Jy
! Component: 1100  -  total flux cleaned = -0.00184537 Jy
! Component: 1150  -  total flux cleaned = -0.00188188 Jy
! Component: 1200  -  total flux cleaned = -0.00183375 Jy
! Component: 1250  -  total flux cleaned = -0.00188121 Jy
! Component: 1300  -  total flux cleaned = -0.00188129 Jy
! Component: 1350  -  total flux cleaned = -0.00192751 Jy
! Component: 1400  -  total flux cleaned = -0.00192757 Jy
! Component: 1450  -  total flux cleaned = -0.00196124 Jy
! Component: 1500  -  total flux cleaned = -0.00197237 Jy
! Component: 1550  -  total flux cleaned = -0.00199409 Jy
! Component: 1600  -  total flux cleaned = -0.00196151 Jy
! Component: 1650  -  total flux cleaned = -0.00195086 Jy
! Component: 1700  -  total flux cleaned = -0.00190865 Jy
! Component: 1750  -  total flux cleaned = -0.00188759 Jy
! Component: 1800  -  total flux cleaned = -0.00181526 Jy
! Component: 1850  -  total flux cleaned = -0.0017847 Jy
! Component: 1900  -  total flux cleaned = -0.00175447 Jy
! Component: 1950  -  total flux cleaned = -0.00171473 Jy
! Component: 2000  -  total flux cleaned = -0.00170487 Jy
! Component: 2050  -  total flux cleaned = -0.00167544 Jy
! Component: 2100  -  total flux cleaned = -0.00165608 Jy
! Component: 2150  -  total flux cleaned = -0.00163705 Jy
! Component: 2200  -  total flux cleaned = -0.0016275 Jy
! Component: 2250  -  total flux cleaned = -0.00159002 Jy
! Component: 2300  -  total flux cleaned = -0.0015995 Jy
! Component: 2350  -  total flux cleaned = -0.00159026 Jy
! Component: 2400  -  total flux cleaned = -0.00156287 Jy
! Component: 2450  -  total flux cleaned = -0.00155382 Jy
! Component: 2500  -  total flux cleaned = -0.00156273 Jy
! Component: 2550  -  total flux cleaned = -0.00153616 Jy
! Component: 2600  -  total flux cleaned = -0.00151878 Jy
! Component: 2650  -  total flux cleaned = -0.0015362 Jy
! Component: 2700  -  total flux cleaned = -0.00153623 Jy
! Component: 2750  -  total flux cleaned = -0.0015362 Jy
! Component: 2800  -  total flux cleaned = -0.00155313 Jy
! Component: 2850  -  total flux cleaned = -0.00154477 Jy
! Component: 2900  -  total flux cleaned = -0.00157801 Jy
! Component: 2950  -  total flux cleaned = -0.00156148 Jy
! Component: 3000  -  total flux cleaned = -0.00158607 Jy
! Component: 3050  -  total flux cleaned = -0.00159409 Jy
! Component: 3100  -  total flux cleaned = -0.00158608 Jy
! Component: 3150  -  total flux cleaned = -0.00162627 Jy
! Component: 3200  -  total flux cleaned = -0.00164221 Jy
! Component: 3250  -  total flux cleaned = -0.00165798 Jy
! Component: 3300  -  total flux cleaned = -0.00166582 Jy
! Component: 3350  -  total flux cleaned = -0.00168916 Jy
! Component: 3400  -  total flux cleaned = -0.00170458 Jy
! Component: 3450  -  total flux cleaned = -0.00169688 Jy
! Component: 3500  -  total flux cleaned = -0.00171212 Jy
! Component: 3550  -  total flux cleaned = -0.00171974 Jy
! Component: 3600  -  total flux cleaned = -0.00174976 Jy
! Component: 3650  -  total flux cleaned = -0.00174223 Jy
! Component: 3700  -  total flux cleaned = -0.00173483 Jy
! Component: 3750  -  total flux cleaned = -0.00174213 Jy
! Component: 3800  -  total flux cleaned = -0.00174944 Jy
! Component: 3850  -  total flux cleaned = -0.00175671 Jy
! Component: 3900  -  total flux cleaned = -0.0017495 Jy
! Component: 3950  -  total flux cleaned = -0.0017495 Jy
! Component: 4000  -  total flux cleaned = -0.00174955 Jy
! Component: 4050  -  total flux cleaned = -0.0017496 Jy
! Total flux subtracted in 4096 components = -0.00177067 Jy
! Clean residual min=-0.000376 max=0.000374 Jy/beam
! Clean residual mean=-0.000000 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.0314279 Jy
keep
! Adding 277 model components to the UV plane model.
! The established model now contains 328 components and 0.0314279 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J0024-1042_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.636 x 4.137 at 3.41 degrees (North through East)
! Clean map  min=-0.00082862  max=0.030235 Jy/beam
! Writing clean map to FITS file: .//J0024-1042_C_map.fits
wmodel .//J0024-1042_C_map.mod
! Writing 328 model components to file: .//J0024-1042_C_map.mod
wobs   .//J0024-1042_C_uvs.fits
! Writing UV FITS file: .//J0024-1042_C_uvs.fits
wwins  .//J0024-1042_C_map.win
! wwins: Wrote 2 windows to .//J0024-1042_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0302345 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000120516 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.19581 1.19581 2.39161 4.78323 9.56646 19.1329 38.2658 76.5317
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.03 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  250.876 
quit
! Quitting program
! Log file .//J0024-1042_C_dfm.log closed on Sun Jan 19 23:42:30 2020