! Started logfile: .//J0017+8135_X_dfm.log on Sun Jan 19 23:41:50 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs .//J0017+8135_X_uvm.fits ! Reading UV FITS file: .//J0017+8135_X_uvm.fits ! AN table 1: 199 integrations on 28 of 28 possible baselines. ! AN table 2: 169 integrations on 21 of 21 possible baselines. ! AN table 3: 50 integrations on 15 of 15 possible baselines. ! AN table 4: 66 integrations on 6 of 6 possible baselines. ! AN table 5: 79 integrations on 3 of 3 possible baselines. ! AN table 6: 59 integrations on 21 of 21 possible baselines. ! AN table 7: 100 integrations on 15 of 15 possible baselines. ! AN table 8: 50 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.668486 visibilities/baseline/integration-bin. ! Found source: J0017+8135 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 73496 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0017+8135_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 5. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 6. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 7. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 8. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=1.724981Jy sigma=33.084793 ! Fit after self-cal, rms=0.506665Jy sigma=9.536068 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.266 mas, bmaj=2.094 mas, bpa=77.21 degrees ! Estimated noise=0.258661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.957888 Jy ! Component: 100 - total flux cleaned = 1.26283 Jy ! Total flux subtracted in 100 components = 1.26283 Jy ! Clean residual min=-0.067183 max=0.146285 Jy/beam ! Clean residual mean=0.000057 rms=0.007459 Jy/beam ! Combined flux in latest and established models = 1.26283 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.26283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.331694Jy sigma=6.152546 ! Fit after self-cal, rms=0.331377Jy sigma=6.148595 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165525 Jy ! Component: 100 - total flux cleaned = 0.260883 Jy ! Total flux subtracted in 100 components = 0.260883 Jy ! Clean residual min=-0.047814 max=0.050546 Jy/beam ! Clean residual mean=0.000035 rms=0.004550 Jy/beam ! Combined flux in latest and established models = 1.52372 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 1.52372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.194290Jy sigma=3.594900 ! Fit after self-cal, rms=0.193934Jy sigma=3.590161 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0626044 Jy ! Component: 100 - total flux cleaned = 0.103925 Jy ! Total flux subtracted in 100 components = 0.103925 Jy ! Clean residual min=-0.043354 max=0.024332 Jy/beam ! Clean residual mean=0.000026 rms=0.003930 Jy/beam ! Combined flux in latest and established models = 1.62764 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 1.62764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.166299Jy sigma=3.151269 ! Fit after self-cal, rms=0.166178Jy sigma=3.149517 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.542 mas, bmaj=2.582 mas, bpa=79.37 degrees ! Estimated noise=0.138164 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203931 Jy ! Component: 100 - total flux cleaned = 0.0241475 Jy ! Component: 150 - total flux cleaned = 0.0241997 Jy ! Component: 200 - total flux cleaned = 0.0247698 Jy ! Total flux subtracted in 200 components = 0.0247698 Jy ! Clean residual min=-0.043617 max=0.031790 Jy/beam ! Clean residual mean=0.000129 rms=0.004839 Jy/beam ! Combined flux in latest and established models = 1.65241 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 1.65241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.159282Jy sigma=3.055125 ! Fit after self-cal, rms=0.159196Jy sigma=3.053295 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.542 x 2.582 at 79.37 degrees (North through East) ! Clean map min=-0.037603 max=1.346 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 1.03 KP 1.02 ! LA 0.97 NL 0.88 OV 1.12 PT 0.92 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 HN 1.10 KP 1.03 ! NL 0.91 OV 1.10 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.01 HN 1.31 NL 0.87 ! OV 1.08 PT 0.96 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.09 HN 1.09 NL 0.98 OV 1.15 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 HN 1.01 KP 1.00 LA 0.96 ! NL 0.84 OV 1.09 PT 0.91 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 HN 1.06 LA 1.02 NL 0.90 ! OV 1.16 PT 0.94 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.02 HN 0.95 LA 0.98 NL 0.93 ! OV 1.13 ! ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.03 KP 1.02 ! LA 0.96 NL 0.87 OV 1.13 PT 0.92 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.97 HN 1.10 KP 1.01 ! NL 0.92 OV 1.11 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.01 HN 1.30 NL 0.86 ! OV 1.08 PT 0.96 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.09 HN 1.10 NL 0.98 OV 1.16 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 HN 1.02 KP 1.00 LA 0.96 ! NL 0.84 OV 1.09 PT 0.91 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 HN 1.07 LA 1.01 NL 0.89 ! OV 1.15 PT 0.94 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.03 HN 0.94 LA 0.98 NL 0.93 ! OV 1.13 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 1.04 KP 1.03 ! LA 0.97 NL 0.88 OV 1.12 PT 0.92 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 HN 1.11 KP 1.01 ! NL 0.92 OV 1.10 PT 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.01 HN 1.31 NL 0.87 ! OV 1.09 PT 0.96 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 HN 1.11 NL 0.97 OV 1.16 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 HN 1.03 KP 1.00 LA 0.96 ! NL 0.85 OV 1.09 PT 0.91 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 HN 1.06 LA 1.01 NL 0.90 ! OV 1.16 PT 0.94 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.03 HN 0.96 LA 0.98 NL 0.94 ! OV 1.12 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.04 KP 1.03 ! LA 0.97 NL 0.88 OV 1.13 PT 0.92 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.99 HN 1.11 KP 1.01 ! NL 0.92 OV 1.11 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.02 HN 1.31 NL 0.87 ! OV 1.09 PT 0.97 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.09 HN 1.11 NL 0.99 OV 1.16 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 HN 1.03 KP 1.01 LA 0.96 ! NL 0.85 OV 1.09 PT 0.91 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 HN 1.05 LA 1.03 NL 0.90 ! OV 1.15 PT 0.94 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.03 HN 0.96 LA 0.99 NL 0.94 ! OV 1.12 ! ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.06 KP 1.03 ! LA 0.98 NL 0.88 OV 1.13 PT 0.93 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 1.11 KP 1.02 ! NL 0.92 OV 1.12 PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.02 HN 1.31 NL 0.88 ! OV 1.09 PT 0.98 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 HN 1.12 NL 0.98 OV 1.17 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 HN 1.03 KP 1.01 LA 0.96 ! NL 0.86 OV 1.09 PT 0.92 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 HN 1.07 LA 1.01 NL 0.88 ! OV 1.16 PT 0.95 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.04 HN 0.96 LA 0.99 NL 0.94 ! OV 1.14 ! ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.05 KP 1.04 ! LA 0.98 NL 0.88 OV 1.14 PT 0.93 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.02 HN 1.11 KP 1.04 ! NL 0.92 OV 1.11 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.03 HN 1.27 NL 0.88 ! OV 1.10 PT 0.98 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 HN 1.12 NL 0.99 OV 1.15 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 HN 1.02 KP 1.01 LA 0.97 ! NL 0.85 OV 1.09 PT 0.92 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 HN 1.08 LA 1.02 NL 0.87 ! OV 1.16 PT 0.95 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.03 HN 0.95 LA 1.00 NL 0.93 ! OV 1.15 ! ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.05 KP 1.04 ! LA 0.98 NL 0.90 OV 1.14 PT 0.93 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 HN 1.10 KP 1.02 ! NL 0.92 OV 1.12 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.03 HN 1.26 NL 0.87 ! OV 1.10 PT 0.98 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.12 HN 1.11 NL 0.99 OV 1.17 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 HN 1.02 KP 1.01 LA 0.96 ! NL 0.86 OV 1.09 PT 0.92 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 HN 1.09 LA 1.03 NL 0.87 ! OV 1.16 PT 0.94 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.06 HN 0.94 LA 0.99 NL 0.95 ! OV 1.15 ! ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.05 KP 1.04 ! LA 0.98 NL 0.90 OV 1.13 PT 0.92 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.99 HN 1.11 KP 1.01 ! NL 0.91 OV 1.11 PT 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.02 HN 1.26 NL 0.88 ! OV 1.10 PT 0.97 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 HN 1.10 NL 1.00 OV 1.17 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 HN 1.02 KP 1.01 LA 0.97 ! NL 0.86 OV 1.10 PT 0.92 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 HN 1.09 LA 1.03 NL 0.86 ! OV 1.15 PT 0.94 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.04 HN 0.96 LA 0.99 NL 0.94 ! OV 1.15 ! ! ! Fit before self-cal, rms=0.159196Jy sigma=3.053295 ! Fit after self-cal, rms=0.077606Jy sigma=1.378749 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.558 mas, bmaj=2.899 mas, bpa=79.69 degrees ! Estimated noise=0.142936 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00670747 Jy ! Component: 100 - total flux cleaned = -0.00803453 Jy ! Component: 150 - total flux cleaned = -0.00878752 Jy ! Component: 200 - total flux cleaned = -0.00896001 Jy ! Total flux subtracted in 200 components = -0.00896001 Jy ! Clean residual min=-0.008682 max=0.009114 Jy/beam ! Clean residual mean=0.000020 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 1.64345 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 1.64345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.076257Jy sigma=1.359842 ! Fit after self-cal, rms=0.076211Jy sigma=1.359010 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.076211Jy sigma=1.359010 ! Fit after self-cal, rms=0.056282Jy sigma=0.924980 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.559 mas, bmaj=2.905 mas, bpa=79.96 degrees ! Estimated noise=0.142913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00431233 Jy ! Component: 100 - total flux cleaned = -0.0050498 Jy ! Component: 150 - total flux cleaned = -0.00552494 Jy ! Component: 200 - total flux cleaned = -0.00594453 Jy ! Total flux subtracted in 200 components = -0.00594453 Jy ! Clean residual min=-0.007972 max=0.007380 Jy/beam ! Clean residual mean=0.000014 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 1.63751 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 1.63751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055184Jy sigma=0.904622 ! Fit after self-cal, rms=0.055156Jy sigma=0.904128 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202636 Jy ! Component: 100 - total flux cleaned = -0.000197193 Jy ! Component: 150 - total flux cleaned = 1.52751e-05 Jy ! Component: 200 - total flux cleaned = 0.000110938 Jy ! Total flux subtracted in 200 components = 0.000110938 Jy ! Clean residual min=-0.007018 max=0.007268 Jy/beam ! Clean residual mean=0.000014 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 1.63762 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 1.63762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054723Jy sigma=0.896379 ! Fit after self-cal, rms=0.054695Jy sigma=0.895996 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054695Jy sigma=0.895996 ! Fit after self-cal, rms=0.050584Jy sigma=0.819796 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.56 mas, bmaj=2.908 mas, bpa=80.04 degrees ! Estimated noise=0.142969 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00173853 Jy ! Component: 100 - total flux cleaned = -0.00206522 Jy ! Component: 150 - total flux cleaned = -0.00216332 Jy ! Component: 200 - total flux cleaned = -0.00216657 Jy ! Total flux subtracted in 200 components = -0.00216657 Jy ! Clean residual min=-0.006074 max=0.005818 Jy/beam ! Clean residual mean=0.000007 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 1.63545 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 1.63545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.050150Jy sigma=0.811251 ! Fit after self-cal, rms=0.050122Jy sigma=0.810873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.24362e-05 Jy ! Component: 100 - total flux cleaned = 2.63723e-06 Jy ! Component: 150 - total flux cleaned = 1.62014e-06 Jy ! Component: 200 - total flux cleaned = -7.27613e-05 Jy ! Total flux subtracted in 200 components = -7.27613e-05 Jy ! Clean residual min=-0.005469 max=0.005676 Jy/beam ! Clean residual mean=0.000008 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 1.63538 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 1.63538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.049863Jy sigma=0.805848 ! Fit after self-cal, rms=0.049839Jy sigma=0.805531 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.049839Jy sigma=0.805531 ! Fit after self-cal, rms=0.049786Jy sigma=0.803845 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.232 mas, bmaj=3.414 mas, bpa=85.15 degrees ! Estimated noise=0.157178 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195939 Jy ! Component: 100 - total flux cleaned = -0.00202694 Jy ! Component: 150 - total flux cleaned = -0.00191338 Jy ! Component: 200 - total flux cleaned = -0.00185211 Jy ! Total flux subtracted in 200 components = -0.00185211 Jy ! Clean residual min=-0.002165 max=0.005859 Jy/beam ! Clean residual mean=0.000012 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 1.63353 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 1.63353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.049682Jy sigma=0.801600 ! Fit after self-cal, rms=0.049573Jy sigma=0.799597 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, -4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447255 Jy ! Component: 100 - total flux cleaned = 0.00619018 Jy ! Component: 150 - total flux cleaned = 0.00744972 Jy ! Component: 200 - total flux cleaned = 0.00839921 Jy ! Total flux subtracted in 200 components = 0.00839921 Jy ! Clean residual min=-0.001333 max=0.002376 Jy/beam ! Clean residual mean=0.000006 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 1.64193 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 87 components and 1.64193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048906Jy sigma=0.785249 ! Fit after self-cal, rms=0.048848Jy sigma=0.784267 ! Inverting map ! Added new window around map position (-1.4, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018697 Jy ! Component: 100 - total flux cleaned = 0.00299131 Jy ! Component: 150 - total flux cleaned = 0.0038119 Jy ! Component: 200 - total flux cleaned = 0.00453017 Jy ! Total flux subtracted in 200 components = 0.00453017 Jy ! Clean residual min=-0.001602 max=0.001506 Jy/beam ! Clean residual mean=0.000004 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 1.64646 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 1.64646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048592Jy sigma=0.778983 ! Fit after self-cal, rms=0.048570Jy sigma=0.778628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.561 mas, bmaj=2.91 mas, bpa=80.11 degrees ! Estimated noise=0.143011 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.561 x 2.91 at 80.11 degrees (North through East) ! Clean map min=-0.0020974 max=1.3603 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.048570Jy sigma=0.778628 ! Fit after self-cal, rms=0.039543Jy sigma=0.615928 ! Inverting map and beam ! Estimated beam: bmin=1.562 mas, bmaj=2.911 mas, bpa=80.11 degrees ! Estimated noise=0.142998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000961521 Jy ! Component: 100 - total flux cleaned = -0.000323408 Jy ! Component: 150 - total flux cleaned = -0.000248824 Jy ! Component: 200 - total flux cleaned = -0.000119634 Jy ! Total flux subtracted in 200 components = -0.000119634 Jy ! Clean residual min=-0.002143 max=0.001243 Jy/beam ! Clean residual mean=0.000002 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 1.64634 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 121 components and 1.64634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039153Jy sigma=0.607875 ! Fit after self-cal, rms=0.039126Jy sigma=0.607391 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465324 Jy ! Component: 100 - total flux cleaned = 0.000630019 Jy ! Component: 150 - total flux cleaned = 0.00083334 Jy ! Component: 200 - total flux cleaned = 0.00102186 Jy ! Total flux subtracted in 200 components = 0.00102186 Jy ! Clean residual min=-0.002048 max=0.001130 Jy/beam ! Clean residual mean=0.000001 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 1.64736 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 1.64736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038986Jy sigma=0.604508 ! Fit after self-cal, rms=0.038977Jy sigma=0.604369 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038977Jy sigma=0.604369 ! Fit after self-cal, rms=0.038945Jy sigma=0.603520 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.263 mas, bmaj=2.49 mas, bpa=78.04 degrees ! Estimated noise=0.271179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.980611 Jy ! Component: 100 - total flux cleaned = 1.27119 Jy ! Component: 150 - total flux cleaned = 1.42924 Jy ! Component: 200 - total flux cleaned = 1.51664 Jy ! Total flux subtracted in 200 components = 1.51664 Jy ! Clean residual min=-0.017300 max=0.042602 Jy/beam ! Clean residual mean=0.000013 rms=0.002185 Jy/beam ! Combined flux in latest and established models = 1.51664 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.51664 Jy ! Inverting map and beam ! Estimated beam: bmin=1.562 mas, bmaj=2.912 mas, bpa=80.13 degrees ! Estimated noise=0.143023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0613862 Jy ! Component: 100 - total flux cleaned = 0.0906242 Jy ! Component: 150 - total flux cleaned = 0.106955 Jy ! Component: 200 - total flux cleaned = 0.114445 Jy ! Total flux subtracted in 200 components = 0.114445 Jy ! Clean residual min=-0.006059 max=0.006130 Jy/beam ! Clean residual mean=0.000009 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 1.63109 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 1.63109 Jy ! Inverting map ! Added new window around map position (0, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244654 Jy ! Component: 100 - total flux cleaned = 0.00468045 Jy ! Component: 150 - total flux cleaned = 0.00654408 Jy ! Component: 200 - total flux cleaned = 0.0076201 Jy ! Total flux subtracted in 200 components = 0.0076201 Jy ! Clean residual min=-0.002795 max=0.002793 Jy/beam ! Clean residual mean=0.000004 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 1.63871 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 45 components and 1.63871 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.234 mas, bmaj=3.416 mas, bpa=85.16 degrees ! Estimated noise=0.157078 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371445 Jy ! Component: 100 - total flux cleaned = 0.0053399 Jy ! Component: 150 - total flux cleaned = 0.00584091 Jy ! Component: 200 - total flux cleaned = 0.00627403 Jy ! Total flux subtracted in 200 components = 0.00627403 Jy ! Clean residual min=-0.001124 max=0.001696 Jy/beam ! Clean residual mean=0.000003 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 1.64498 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.4, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106037 Jy ! Component: 100 - total flux cleaned = 0.00123812 Jy ! Component: 150 - total flux cleaned = 0.00134754 Jy ! Component: 200 - total flux cleaned = 0.0015013 Jy ! Total flux subtracted in 200 components = 0.0015013 Jy ! Clean residual min=-0.000952 max=0.000950 Jy/beam ! Clean residual mean=0.000003 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 1.64648 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 94 components and 1.64648 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.562 mas, bmaj=2.912 mas, bpa=80.13 degrees ! Estimated noise=0.143023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000285052 Jy ! Component: 100 - total flux cleaned = -0.000295146 Jy ! Component: 150 - total flux cleaned = -0.000293979 Jy ! Component: 200 - total flux cleaned = -0.000395511 Jy ! Total flux subtracted in 200 components = -0.000395511 Jy ! Clean residual min=-0.001706 max=0.001568 Jy/beam ! Clean residual mean=0.000002 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 1.64609 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 110 components and 1.64609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.039784Jy sigma=0.620300 ! Fit after self-cal, rms=0.039748Jy sigma=0.619479 wmodel J0017+8135_X_map.mod ! Writing 110 model components to file: J0017+8135_X_map.mod wobs J0017+8135_X_uvs.fits ! Writing UV FITS file: J0017+8135_X_uvs.fits wwins J0017+8135_X_map.win ! wwins: Wrote 5 windows to J0017+8135_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362683 Jy ! Component: 100 - total flux cleaned = 0.000240783 Jy ! Component: 150 - total flux cleaned = 0.00024152 Jy ! Component: 200 - total flux cleaned = 0.00024187 Jy ! Component: 250 - total flux cleaned = 0.000269232 Jy ! Component: 300 - total flux cleaned = 0.000269655 Jy ! Component: 350 - total flux cleaned = 0.000269755 Jy ! Component: 400 - total flux cleaned = 0.000269871 Jy ! Component: 450 - total flux cleaned = 0.000269818 Jy ! Component: 500 - total flux cleaned = 0.000245395 Jy ! Component: 550 - total flux cleaned = 0.000221791 Jy ! Component: 600 - total flux cleaned = 0.000245561 Jy ! Component: 650 - total flux cleaned = 0.000245653 Jy ! Component: 700 - total flux cleaned = 0.00022281 Jy ! Component: 750 - total flux cleaned = 0.000200518 Jy ! Component: 800 - total flux cleaned = 0.0002005 Jy ! Component: 850 - total flux cleaned = 0.000200281 Jy ! Component: 900 - total flux cleaned = 0.000178995 Jy ! Component: 950 - total flux cleaned = 0.000200073 Jy ! Component: 1000 - total flux cleaned = 0.000220697 Jy ! Component: 1050 - total flux cleaned = 0.000261137 Jy ! Component: 1100 - total flux cleaned = 0.000241015 Jy ! Component: 1150 - total flux cleaned = 0.000260682 Jy ! Component: 1200 - total flux cleaned = 0.00027993 Jy ! Component: 1250 - total flux cleaned = 0.000260452 Jy ! Component: 1300 - total flux cleaned = 0.00027955 Jy ! Component: 1350 - total flux cleaned = 0.000316988 Jy ! Component: 1400 - total flux cleaned = 0.000298412 Jy ! Component: 1450 - total flux cleaned = 0.000371671 Jy ! Component: 1500 - total flux cleaned = 0.000407629 Jy ! Component: 1550 - total flux cleaned = 0.000425733 Jy ! Component: 1600 - total flux cleaned = 0.000479076 Jy ! Component: 1650 - total flux cleaned = 0.000566879 Jy ! Component: 1700 - total flux cleaned = 0.000584129 Jy ! Component: 1750 - total flux cleaned = 0.000635679 Jy ! Component: 1800 - total flux cleaned = 0.000686616 Jy ! Component: 1850 - total flux cleaned = 0.000720286 Jy ! Component: 1900 - total flux cleaned = 0.000770198 Jy ! Component: 1950 - total flux cleaned = 0.000819575 Jy ! Component: 2000 - total flux cleaned = 0.000884846 Jy ! Component: 2050 - total flux cleaned = 0.000916938 Jy ! Component: 2100 - total flux cleaned = 0.000932833 Jy ! Component: 2150 - total flux cleaned = 0.00101194 Jy ! Component: 2200 - total flux cleaned = 0.00101185 Jy ! Component: 2250 - total flux cleaned = 0.00102755 Jy ! Component: 2300 - total flux cleaned = 0.00102768 Jy ! Component: 2350 - total flux cleaned = 0.00105841 Jy ! Component: 2400 - total flux cleaned = 0.00107355 Jy ! Component: 2450 - total flux cleaned = 0.00108864 Jy ! Component: 2500 - total flux cleaned = 0.00111853 Jy ! Component: 2550 - total flux cleaned = 0.00114814 Jy ! Component: 2600 - total flux cleaned = 0.00123593 Jy ! Component: 2650 - total flux cleaned = 0.00122137 Jy ! Component: 2700 - total flux cleaned = 0.00127899 Jy ! Component: 2750 - total flux cleaned = 0.00133615 Jy ! Component: 2800 - total flux cleaned = 0.00132207 Jy ! Component: 2850 - total flux cleaned = 0.00139244 Jy ! Component: 2900 - total flux cleaned = 0.00142044 Jy ! Component: 2950 - total flux cleaned = 0.00147598 Jy ! Component: 3000 - total flux cleaned = 0.00146213 Jy ! Component: 3050 - total flux cleaned = 0.00150319 Jy ! Component: 3100 - total flux cleaned = 0.00151679 Jy ! Component: 3150 - total flux cleaned = 0.00151679 Jy ! Component: 3200 - total flux cleaned = 0.00153024 Jy ! Component: 3250 - total flux cleaned = 0.00157013 Jy ! Component: 3300 - total flux cleaned = 0.00155687 Jy ! Component: 3350 - total flux cleaned = 0.00158314 Jy ! Component: 3400 - total flux cleaned = 0.0015831 Jy ! Component: 3450 - total flux cleaned = 0.00159607 Jy ! Component: 3500 - total flux cleaned = 0.00162165 Jy ! Component: 3550 - total flux cleaned = 0.0015962 Jy ! Component: 3600 - total flux cleaned = 0.00158364 Jy ! Component: 3650 - total flux cleaned = 0.00160883 Jy ! Component: 3700 - total flux cleaned = 0.00159638 Jy ! Component: 3750 - total flux cleaned = 0.00162132 Jy ! Component: 3800 - total flux cleaned = 0.00160889 Jy ! Component: 3850 - total flux cleaned = 0.00160888 Jy ! Component: 3900 - total flux cleaned = 0.00158454 Jy ! Component: 3950 - total flux cleaned = 0.00162095 Jy ! Component: 4000 - total flux cleaned = 0.00165714 Jy ! Component: 4050 - total flux cleaned = 0.00159726 Jy ! Total flux subtracted in 4096 components = 0.00160909 Jy ! Clean residual min=-0.000595 max=0.000605 Jy/beam ! Clean residual mean=0.000001 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 1.6477 Jy keep ! Adding 164 model components to the UV plane model. ! The established model now contains 254 components and 1.6477 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0017+8135_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.562 x 2.912 at 80.13 degrees (North through East) ! Clean map min=-0.001358 max=1.3655 Jy/beam ! Writing clean map to FITS file: .//J0017+8135_X_map.fits wmodel .//J0017+8135_X_map.mod ! Writing 254 model components to file: .//J0017+8135_X_map.mod wobs .//J0017+8135_X_uvs.fits ! Writing UV FITS file: .//J0017+8135_X_uvs.fits wwins .//J0017+8135_X_map.win ! wwins: Wrote 6 windows to .//J0017+8135_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.36552 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000200831 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0441217 0.0441217 0.0882434 0.176487 0.352973 0.705947 1.41189 2.82379 5.64757 11.2951 22.5903 45.1806 90.3612 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.365 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 6799.38 quit ! Quitting program ! Log file .//J0017+8135_X_dfm.log closed on Sun Jan 19 23:41:58 2020