! Started logfile: .//J0017+8135_C_dfm.log on Sun Jan 19 23:41:41 2020 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs .//J0017+8135_C_uvm.fits ! Reading UV FITS file: .//J0017+8135_C_uvm.fits ! AN table 1: 199 integrations on 28 of 28 possible baselines. ! AN table 2: 169 integrations on 21 of 21 possible baselines. ! AN table 3: 50 integrations on 15 of 15 possible baselines. ! AN table 4: 66 integrations on 6 of 6 possible baselines. ! AN table 5: 79 integrations on 3 of 3 possible baselines. ! AN table 6: 59 integrations on 21 of 21 possible baselines. ! AN table 7: 100 integrations on 15 of 15 possible baselines. ! AN table 8: 50 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.668486 visibilities/baseline/integration-bin. ! Found source: J0017+8135 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 73496 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_01.dfm J0017+8135_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 300 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 300 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 300 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 378 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 5. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 6. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 7. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 8. ! A total of 362 telescope corrections were flagged in sub-array 1. ! A total of 298 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 69 telescope corrections were flagged in sub-array 4. ! A total of 54 telescope corrections were flagged in sub-array 5. ! A total of 40 telescope corrections were flagged in sub-array 6. ! A total of 152 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=2.113168Jy sigma=44.079582 ! Fit after self-cal, rms=0.888990Jy sigma=18.793726 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.235 mas, bmaj=3.657 mas, bpa=76.29 degrees ! Estimated noise=0.244212 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.41325 Jy ! Component: 100 - total flux cleaned = 1.72348 Jy ! Total flux subtracted in 100 components = 1.72348 Jy ! Clean residual min=-0.047170 max=0.100559 Jy/beam ! Clean residual mean=0.000043 rms=0.007371 Jy/beam ! Combined flux in latest and established models = 1.72348 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.72348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.293739Jy sigma=6.778030 ! Fit after self-cal, rms=0.293735Jy sigma=6.777992 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110439 Jy ! Component: 100 - total flux cleaned = 0.172485 Jy ! Total flux subtracted in 100 components = 0.172485 Jy ! Clean residual min=-0.036081 max=0.033784 Jy/beam ! Clean residual mean=0.000018 rms=0.006264 Jy/beam ! Combined flux in latest and established models = 1.89597 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 1.89597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.244671Jy sigma=5.788889 ! Fit after self-cal, rms=0.244656Jy sigma=5.788652 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=4.587 mas, bpa=76.81 degrees ! Estimated noise=0.131319 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348235 Jy ! Component: 100 - total flux cleaned = 0.0370786 Jy ! Component: 150 - total flux cleaned = 0.0389039 Jy ! Component: 200 - total flux cleaned = 0.0410954 Jy ! Total flux subtracted in 200 components = 0.0410954 Jy ! Clean residual min=-0.034133 max=0.036625 Jy/beam ! Clean residual mean=0.000041 rms=0.006434 Jy/beam ! Combined flux in latest and established models = 1.93706 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 36 components and 1.93706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.237410Jy sigma=5.598433 ! Fit after self-cal, rms=0.237407Jy sigma=5.598362 ! Inverting map ! Added new window around map position (27.9, 17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731491 Jy ! Component: 100 - total flux cleaned = 0.00603025 Jy ! Component: 150 - total flux cleaned = 0.00332479 Jy ! Component: 200 - total flux cleaned = 0.00255539 Jy ! Total flux subtracted in 200 components = 0.00255539 Jy ! Clean residual min=-0.033608 max=0.033375 Jy/beam ! Clean residual mean=0.000045 rms=0.005968 Jy/beam ! Combined flux in latest and established models = 1.93962 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 74 components and 1.93962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.230208Jy sigma=5.371882 ! Fit after self-cal, rms=0.229577Jy sigma=5.357867 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.744 x 4.587 at 76.81 degrees (North through East) ! Clean map min=-0.037953 max=1.8497 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.03 KP 1.01 ! LA 1.01 NL 0.81 OV 1.01 PT 0.98 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.05 HN 1.06 KP 1.02 ! NL 1.03 OV 1.01 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* HN 0.00* NL 0.00* ! OV 0.00* PT 0.00* ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 HN 1.01 NL 1.05 OV 0.96 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.96 HN 0.99 KP 0.99 LA 1.00 ! NL 0.96 OV 1.00 PT 1.00 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 HN 1.02 LA 1.03 NL 1.01 ! OV 1.03 PT 1.03 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 HN 0.98 LA 1.04 NL 1.09 ! OV 0.97 ! ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.02 KP 1.01 ! LA 1.01 NL 0.82 OV 1.01 PT 0.98 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.04 HN 1.05 KP 1.03 ! NL 1.04 OV 0.99 PT 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* HN 0.00* NL 0.00* ! OV 0.00* PT 0.00* ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 1.01 NL 1.05 OV 0.96 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 HN 0.99 KP 0.98 LA 0.99 ! NL 0.97 OV 0.99 PT 1.00 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 HN 1.03 LA 1.03 NL 1.02 ! OV 1.04 PT 1.03 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 HN 0.98 LA 1.04 NL 1.07 ! OV 0.99 ! ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.03 KP 1.01 ! LA 1.01 NL 0.86 OV 1.02 PT 1.01 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.05 HN 1.07 KP 1.03 ! NL 1.06 OV 1.00 PT 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* HN 0.00* NL 0.00* ! OV 0.00* PT 0.00* ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 1.01 NL 1.05 OV 0.96 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 HN 1.00 KP 1.00 LA 1.00 ! NL 0.96 OV 1.00 PT 1.00 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 HN 1.04 LA 1.03 NL 1.00 ! OV 1.04 PT 1.03 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 HN 0.96 LA 1.05 NL 1.07 ! OV 1.00 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.04 KP 1.01 ! LA 1.01 NL 0.87 OV 1.02 PT 1.01 ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.01 HN 1.09 KP 1.00 ! NL 1.03 OV 1.01 PT 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.03 HN 1.33 NL 1.01 ! OV 0.98 PT 1.02 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 HN 0.98 NL 1.06 OV 0.93 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 HN 1.02 KP 1.00 LA 1.00 ! NL 0.99 OV 1.00 PT 0.99 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 HN 1.01 LA 1.07 NL 1.02 ! OV 1.03 PT 1.00 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 HN 0.96 LA 1.05 NL 1.06 ! OV 1.00 ! ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.03 KP 1.01 ! LA 1.00 NL 0.86 OV 1.02 PT 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 HN 1.08 KP 1.01 ! NL 1.03 OV 0.99 PT 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 HN 1.12 NL 1.01 ! OV 1.00 PT 1.02 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 0.99 NL 1.05 OV 0.97 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 HN 1.00 KP 1.00 LA 0.99 ! NL 0.96 OV 0.99 PT 0.99 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 HN 1.02 LA 1.02 NL 0.99 ! OV 1.02 PT 1.02 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 0.99 HN 0.95 LA 1.05 NL 1.07 ! OV 0.99 ! ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.04 KP 1.01 ! LA 1.00 NL 0.86 OV 1.02 PT 1.01 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.96 HN 1.08 KP 1.00 ! NL 1.02 OV 1.00 PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.01 HN 1.12 NL 1.01 ! OV 1.00 PT 1.02 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 HN 0.99 NL 1.06 OV 0.98 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 HN 1.01 KP 1.00 LA 0.99 ! NL 0.97 OV 0.99 PT 0.99 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00 HN 1.02 LA 1.02 NL 0.98 ! OV 1.03 PT 1.01 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 HN 0.94 LA 1.05 NL 1.07 ! OV 1.00 ! ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.04 KP 1.00 ! LA 1.00 NL 0.86 OV 1.02 PT 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.96 HN 1.08 KP 0.99 ! NL 1.03 OV 1.00 PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 HN 1.12 NL 1.01 ! OV 1.00 PT 1.02 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 HN 0.99 NL 1.06 OV 0.98 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 HN 1.00 KP 1.00 LA 0.98 ! NL 0.96 OV 0.99 PT 0.98 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00 HN 1.02 LA 1.01 NL 0.97 ! OV 1.02 PT 1.01 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 HN 0.94 LA 1.06 NL 1.08 ! OV 1.00 ! ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.03 KP 1.00 ! LA 1.00 NL 0.86 OV 1.02 PT 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.95 HN 1.08 KP 0.98 ! NL 1.02 OV 1.01 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.01 HN 1.12 NL 1.02 ! OV 0.99 PT 1.02 ! ! A total of 135 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 HN 0.98 NL 1.06 OV 0.99 ! ! A total of 183 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 HN 1.01 KP 1.00 LA 0.98 ! NL 0.96 OV 0.99 PT 0.98 ! ! A total of 90 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00 HN 1.03 LA 1.01 NL 0.96 ! OV 1.02 PT 1.02 ! ! A total of 51 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 HN 0.94 LA 1.03 NL 1.07 ! OV 1.00 ! ! ! Fit before self-cal, rms=0.229577Jy sigma=5.357867 ! Fit after self-cal, rms=0.185364Jy sigma=4.612053 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=5.102 mas, bpa=77.29 degrees ! Estimated noise=0.134998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401974 Jy ! Component: 100 - total flux cleaned = 0.00622296 Jy ! Component: 150 - total flux cleaned = 0.00805177 Jy ! Component: 200 - total flux cleaned = 0.00933119 Jy ! Total flux subtracted in 200 components = 0.00933119 Jy ! Clean residual min=-0.025054 max=0.022246 Jy/beam ! Clean residual mean=0.000017 rms=0.004917 Jy/beam ! Combined flux in latest and established models = 1.94895 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 101 components and 1.94895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.184428Jy sigma=4.560182 ! Fit after self-cal, rms=0.184408Jy sigma=4.557526 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.184408Jy sigma=4.557526 ! Fit after self-cal, rms=0.072813Jy sigma=1.418657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=5.103 mas, bpa=77.61 degrees ! Estimated noise=0.135182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356585 Jy ! Component: 100 - total flux cleaned = 0.00130513 Jy ! Component: 150 - total flux cleaned = 0.00376134 Jy ! Component: 200 - total flux cleaned = 0.00577142 Jy ! Total flux subtracted in 200 components = 0.00577142 Jy ! Clean residual min=-0.005499 max=0.019245 Jy/beam ! Clean residual mean=0.000010 rms=0.001443 Jy/beam ! Combined flux in latest and established models = 1.95472 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 118 components and 1.95472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.066815Jy sigma=1.273994 ! Fit after self-cal, rms=0.066039Jy sigma=1.262240 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.9, -9.3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186682 Jy ! Component: 100 - total flux cleaned = 0.0220647 Jy ! Component: 150 - total flux cleaned = 0.0248295 Jy ! Component: 200 - total flux cleaned = 0.0271678 Jy ! Total flux subtracted in 200 components = 0.0271678 Jy ! Clean residual min=-0.005207 max=0.004592 Jy/beam ! Clean residual mean=0.000005 rms=0.001001 Jy/beam ! Combined flux in latest and established models = 1.98189 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 139 components and 1.98189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059712Jy sigma=1.135363 ! Fit after self-cal, rms=0.059127Jy sigma=1.124491 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409283 Jy ! Component: 100 - total flux cleaned = 0.00519691 Jy ! Component: 150 - total flux cleaned = 0.00635928 Jy ! Component: 200 - total flux cleaned = 0.00771401 Jy ! Total flux subtracted in 200 components = 0.00771401 Jy ! Clean residual min=-0.005033 max=0.003783 Jy/beam ! Clean residual mean=0.000002 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 1.9896 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 158 components and 1.9896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.057658Jy sigma=1.097101 ! Fit after self-cal, rms=0.057555Jy sigma=1.095643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.057555Jy sigma=1.095643 ! Fit after self-cal, rms=0.047799Jy sigma=0.895474 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=5.105 mas, bpa=77.68 degrees ! Estimated noise=0.135047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106882 Jy ! Component: 100 - total flux cleaned = 0.00273021 Jy ! Component: 150 - total flux cleaned = 0.00398437 Jy ! Component: 200 - total flux cleaned = 0.00477407 Jy ! Total flux subtracted in 200 components = 0.00477407 Jy ! Clean residual min=-0.005045 max=0.003012 Jy/beam ! Clean residual mean=0.000000 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 1.99438 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 170 components and 1.99438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.046291Jy sigma=0.860364 ! Fit after self-cal, rms=0.046168Jy sigma=0.858616 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295568 Jy ! Component: 100 - total flux cleaned = 0.000853715 Jy ! Component: 150 - total flux cleaned = 0.00161288 Jy ! Component: 200 - total flux cleaned = 0.00218837 Jy ! Total flux subtracted in 200 components = 0.00218837 Jy ! Clean residual min=-0.005274 max=0.002904 Jy/beam ! Clean residual mean=-0.000001 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 1.99657 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 186 components and 1.99657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.045450Jy sigma=0.844177 ! Fit after self-cal, rms=0.045409Jy sigma=0.843643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.045409Jy sigma=0.843643 ! Fit after self-cal, rms=0.045018Jy sigma=0.833666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=5.982 mas, bpa=81.55 degrees ! Estimated noise=0.149631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276338 Jy ! Component: 100 - total flux cleaned = 0.000925635 Jy ! Component: 150 - total flux cleaned = 0.00149309 Jy ! Component: 200 - total flux cleaned = 0.00209115 Jy ! Total flux subtracted in 200 components = 0.00209115 Jy ! Clean residual min=-0.003381 max=0.002559 Jy/beam ! Clean residual mean=-0.000002 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 1.99866 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 219 components and 1.99866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044426Jy sigma=0.819665 ! Fit after self-cal, rms=0.044374Jy sigma=0.818927 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276848 Jy ! Component: 100 - total flux cleaned = 0.000625117 Jy ! Component: 150 - total flux cleaned = 0.00108781 Jy ! Component: 200 - total flux cleaned = 0.00129718 Jy ! Total flux subtracted in 200 components = 0.00129718 Jy ! Clean residual min=-0.003357 max=0.002358 Jy/beam ! Clean residual mean=-0.000002 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 1.99995 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 233 components and 1.99995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044101Jy sigma=0.813358 ! Fit after self-cal, rms=0.044085Jy sigma=0.813133 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=5.107 mas, bpa=77.73 degrees ! Estimated noise=0.135057 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.722 x 5.107 at 77.73 degrees (North through East) ! Clean map min=-0.0048934 max=1.852 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.044085Jy sigma=0.813133 ! Fit after self-cal, rms=0.038248Jy sigma=0.689817 ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=5.108 mas, bpa=77.74 degrees ! Estimated noise=0.135055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571308 Jy ! Component: 100 - total flux cleaned = 0.000699849 Jy ! Component: 150 - total flux cleaned = 0.000921151 Jy ! Component: 200 - total flux cleaned = 0.0010202 Jy ! Total flux subtracted in 200 components = 0.0010202 Jy ! Clean residual min=-0.005061 max=0.002461 Jy/beam ! Clean residual mean=-0.000001 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 2.00097 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 239 components and 2.00097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037569Jy sigma=0.675364 ! Fit after self-cal, rms=0.037543Jy sigma=0.674894 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018653 Jy ! Component: 100 - total flux cleaned = 0.000601364 Jy ! Component: 150 - total flux cleaned = 0.000903434 Jy ! Component: 200 - total flux cleaned = 0.00118371 Jy ! Total flux subtracted in 200 components = 0.00118371 Jy ! Clean residual min=-0.005066 max=0.002435 Jy/beam ! Clean residual mean=-0.000002 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 2.00216 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 247 components and 2.00216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037228Jy sigma=0.668383 ! Fit after self-cal, rms=0.037216Jy sigma=0.668174 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.037216Jy sigma=0.668174 ! Fit after self-cal, rms=0.036999Jy sigma=0.663167 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.176 mas, bmaj=4.315 mas, bpa=77 degrees ! Estimated noise=0.252075 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.4074 Jy ! Component: 100 - total flux cleaned = 1.7148 Jy ! Component: 150 - total flux cleaned = 1.81703 Jy ! Component: 200 - total flux cleaned = 1.87394 Jy ! Total flux subtracted in 200 components = 1.87394 Jy ! Clean residual min=-0.015649 max=0.028400 Jy/beam ! Clean residual mean=0.000015 rms=0.001783 Jy/beam ! Combined flux in latest and established models = 1.87394 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.87394 Jy ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=5.111 mas, bpa=77.8 degrees ! Estimated noise=0.135051 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430928 Jy ! Component: 100 - total flux cleaned = 0.0688792 Jy ! Component: 150 - total flux cleaned = 0.0875645 Jy ! Component: 200 - total flux cleaned = 0.101284 Jy ! Total flux subtracted in 200 components = 0.101284 Jy ! Clean residual min=-0.009929 max=0.007866 Jy/beam ! Clean residual mean=0.000002 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 1.97523 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 44 components and 1.97523 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.862 mas, bmaj=5.985 mas, bpa=81.58 degrees ! Estimated noise=0.149653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124069 Jy ! Component: 100 - total flux cleaned = 0.0176157 Jy ! Component: 150 - total flux cleaned = 0.0197437 Jy ! Component: 200 - total flux cleaned = 0.0208645 Jy ! Total flux subtracted in 200 components = 0.0208645 Jy ! Clean residual min=-0.005957 max=0.003747 Jy/beam ! Clean residual mean=-0.000001 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 1.99609 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000981487 Jy ! Component: 100 - total flux cleaned = 0.00166907 Jy ! Component: 150 - total flux cleaned = 0.00228799 Jy ! Component: 200 - total flux cleaned = 0.00270998 Jy ! Total flux subtracted in 200 components = 0.00270998 Jy ! Clean residual min=-0.004263 max=0.002839 Jy/beam ! Clean residual mean=-0.000002 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 1.9988 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 130 components and 1.9988 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=5.111 mas, bpa=77.8 degrees ! Estimated noise=0.135051 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00296943 Jy ! Component: 100 - total flux cleaned = 0.00253404 Jy ! Component: 150 - total flux cleaned = 0.00215439 Jy ! Component: 200 - total flux cleaned = 0.00180514 Jy ! Total flux subtracted in 200 components = 0.00180514 Jy ! Clean residual min=-0.005466 max=0.002715 Jy/beam ! Clean residual mean=-0.000002 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 2.0006 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 141 components and 2.0006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.038397Jy sigma=0.701935 ! Fit after self-cal, rms=0.038102Jy sigma=0.695008 wmodel J0017+8135_C_map.mod ! Writing 141 model components to file: J0017+8135_C_map.mod wobs J0017+8135_C_uvs.fits ! Writing UV FITS file: J0017+8135_C_uvs.fits wwins J0017+8135_C_map.win ! wwins: Wrote 3 windows to J0017+8135_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00233523 Jy ! Component: 100 - total flux cleaned = -0.00410914 Jy ! Component: 150 - total flux cleaned = -0.00452882 Jy ! Component: 200 - total flux cleaned = -0.00474836 Jy ! Component: 250 - total flux cleaned = -0.00500448 Jy ! Component: 300 - total flux cleaned = -0.00505444 Jy ! Component: 350 - total flux cleaned = -0.00514928 Jy ! Component: 400 - total flux cleaned = -0.00519443 Jy ! Component: 450 - total flux cleaned = -0.00519482 Jy ! Component: 500 - total flux cleaned = -0.00519591 Jy ! Component: 550 - total flux cleaned = -0.00523894 Jy ! Component: 600 - total flux cleaned = -0.00524045 Jy ! Component: 650 - total flux cleaned = -0.0052018 Jy ! Component: 700 - total flux cleaned = -0.00516358 Jy ! Component: 750 - total flux cleaned = -0.00508847 Jy ! Component: 800 - total flux cleaned = -0.00501544 Jy ! Component: 850 - total flux cleaned = -0.0049082 Jy ! Component: 900 - total flux cleaned = -0.00487294 Jy ! Component: 950 - total flux cleaned = -0.00473584 Jy ! Component: 1000 - total flux cleaned = -0.00466867 Jy ! Component: 1050 - total flux cleaned = -0.00450388 Jy ! Component: 1100 - total flux cleaned = -0.00440684 Jy ! Component: 1150 - total flux cleaned = -0.00431153 Jy ! Component: 1200 - total flux cleaned = -0.0042175 Jy ! Component: 1250 - total flux cleaned = -0.00412464 Jy ! Component: 1300 - total flux cleaned = -0.00400301 Jy ! Component: 1350 - total flux cleaned = -0.00388324 Jy ! Component: 1400 - total flux cleaned = -0.00376542 Jy ! Component: 1450 - total flux cleaned = -0.00362005 Jy ! Component: 1500 - total flux cleaned = -0.00356243 Jy ! Component: 1550 - total flux cleaned = -0.00339211 Jy ! Component: 1600 - total flux cleaned = -0.00330819 Jy ! Component: 1650 - total flux cleaned = -0.00317033 Jy ! Component: 1700 - total flux cleaned = -0.00306193 Jy ! Component: 1750 - total flux cleaned = -0.00300825 Jy ! Component: 1800 - total flux cleaned = -0.00295503 Jy ! Component: 1850 - total flux cleaned = -0.00287593 Jy ! Component: 1900 - total flux cleaned = -0.00277213 Jy ! Component: 1950 - total flux cleaned = -0.00264423 Jy ! Component: 2000 - total flux cleaned = -0.00259356 Jy ! Component: 2050 - total flux cleaned = -0.00246812 Jy ! Component: 2100 - total flux cleaned = -0.00236922 Jy ! Component: 2150 - total flux cleaned = -0.00227152 Jy ! Component: 2200 - total flux cleaned = -0.00215096 Jy ! Component: 2250 - total flux cleaned = -0.00205548 Jy ! Component: 2300 - total flux cleaned = -0.00193763 Jy ! Component: 2350 - total flux cleaned = -0.00175111 Jy ! Component: 2400 - total flux cleaned = -0.00168215 Jy ! Component: 2450 - total flux cleaned = -0.00161346 Jy ! Component: 2500 - total flux cleaned = -0.00147759 Jy ! Component: 2550 - total flux cleaned = -0.00141049 Jy ! Component: 2600 - total flux cleaned = -0.00132166 Jy ! Component: 2650 - total flux cleaned = -0.00123405 Jy ! Component: 2700 - total flux cleaned = -0.00119042 Jy ! Component: 2750 - total flux cleaned = -0.00108299 Jy ! Component: 2800 - total flux cleaned = -0.00104041 Jy ! Component: 2850 - total flux cleaned = -0.000977278 Jy ! Component: 2900 - total flux cleaned = -0.000914615 Jy ! Component: 2950 - total flux cleaned = -0.00087324 Jy ! Component: 3000 - total flux cleaned = -0.00083233 Jy ! Component: 3050 - total flux cleaned = -0.00077143 Jy ! Component: 3100 - total flux cleaned = -0.000791685 Jy ! Component: 3150 - total flux cleaned = -0.000711579 Jy ! Component: 3200 - total flux cleaned = -0.000692085 Jy ! Component: 3250 - total flux cleaned = -0.000711988 Jy ! Component: 3300 - total flux cleaned = -0.000692548 Jy ! Component: 3350 - total flux cleaned = -0.000750402 Jy ! Component: 3400 - total flux cleaned = -0.000634914 Jy ! Component: 3450 - total flux cleaned = -0.000635003 Jy ! Component: 3500 - total flux cleaned = -0.000710497 Jy ! Component: 3550 - total flux cleaned = -0.000672612 Jy ! Component: 3600 - total flux cleaned = -0.000709852 Jy ! Component: 3650 - total flux cleaned = -0.000709573 Jy ! Component: 3700 - total flux cleaned = -0.000691319 Jy ! Component: 3750 - total flux cleaned = -0.000691309 Jy ! Component: 3800 - total flux cleaned = -0.000655147 Jy ! Component: 3850 - total flux cleaned = -0.000637197 Jy ! Component: 3900 - total flux cleaned = -0.000655095 Jy ! Component: 3950 - total flux cleaned = -0.000637223 Jy ! Component: 4000 - total flux cleaned = -0.000566807 Jy ! Component: 4050 - total flux cleaned = -0.000602019 Jy ! Total flux subtracted in 4096 components = -0.000584651 Jy ! Clean residual min=-0.000867 max=0.000909 Jy/beam ! Clean residual mean=-0.000001 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 2.00002 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 370 components and 2.00002 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0017+8135_C_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.721 x 5.111 at 77.8 degrees (North through East) ! Clean map min=-0.0038149 max=1.8534 Jy/beam ! Writing clean map to FITS file: .//J0017+8135_C_map.fits wmodel .//J0017+8135_C_map.mod ! Writing 370 model components to file: .//J0017+8135_C_map.mod wobs .//J0017+8135_C_uvs.fits ! Writing UV FITS file: .//J0017+8135_C_uvs.fits wwins .//J0017+8135_C_map.win ! wwins: Wrote 4 windows to .//J0017+8135_C_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.85345 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000316137 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0511702 0.0511702 0.10234 0.204681 0.409361 0.818722 1.63744 3.27489 6.54978 13.0996 26.1991 52.3982 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.853 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5862.79 quit ! Quitting program ! Log file .//J0017+8135_C_dfm.log closed on Sun Jan 19 23:41:49 2020