! Started logfile: .//J0010-0433_X_dfm.log on Sun Jan 19 23:41:26 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs .//J0010-0433_X_uvm.fits ! Reading UV FITS file: .//J0010-0433_X_uvm.fits ! AN table 1: 103 integrations on 6 of 6 possible baselines. ! AN table 2: 33 integrations on 21 of 21 possible baselines. ! AN table 3: 17 integrations on 15 of 15 possible baselines. ! AN table 4: 31 integrations on 3 of 3 possible baselines. ! AN table 5: 15 integrations on 6 of 6 possible baselines. ! AN table 6: 31 integrations on 10 of 10 possible baselines. ! AN table 7: 34 integrations on 10 of 10 possible baselines. ! AN table 8: 20 integrations on 6 of 6 possible baselines. ! AN table 9: 18 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.804001 visibilities/baseline/integration-bin. ! Found source: J0010-0433 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 17360 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0010-0433_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 5. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 6. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 7. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 8. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=1.041360Jy sigma=18.696268 ! Fit after self-cal, rms=0.752964Jy sigma=13.507420 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8503 mas, bmaj=2.359 mas, bpa=-8.04 degrees ! Estimated noise=0.4574 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189172 Jy ! Component: 100 - total flux cleaned = 0.236121 Jy ! Total flux subtracted in 100 components = 0.236121 Jy ! Clean residual min=-0.008697 max=0.016790 Jy/beam ! Clean residual mean=0.000003 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 0.236121 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.236121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056910Jy sigma=0.936595 ! Fit after self-cal, rms=0.056852Jy sigma=0.936016 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161185 Jy ! Component: 100 - total flux cleaned = 0.0234494 Jy ! Total flux subtracted in 100 components = 0.0234494 Jy ! Clean residual min=-0.007944 max=0.008540 Jy/beam ! Clean residual mean=0.000005 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.259571 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.259571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.051501Jy sigma=0.840021 ! Fit after self-cal, rms=0.051474Jy sigma=0.839779 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.098 mas, bmaj=2.792 mas, bpa=-3.309 degrees ! Estimated noise=0.306498 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00651727 Jy ! Component: 100 - total flux cleaned = 0.00950557 Jy ! Component: 150 - total flux cleaned = 0.011168 Jy ! Component: 200 - total flux cleaned = 0.0115377 Jy ! Total flux subtracted in 200 components = 0.0115377 Jy ! Clean residual min=-0.008721 max=0.008141 Jy/beam ! Clean residual mean=0.000006 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 0.271109 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 36 components and 0.271109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.050621Jy sigma=0.826692 ! Fit after self-cal, rms=0.050618Jy sigma=0.826657 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.098 x 2.792 at -3.309 degrees (North through East) ! Clean map min=-0.0084133 max=0.24415 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.05 NL 0.92 OV 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.95 HN 0.93 KP 1.00 ! NL 0.94 OV 1.15 PT 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HN 1.04 KP 1.10 NL 1.02 ! OV 1.11 PT 0.94 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.95 OV 1.09 PT 0.93 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 1.11 KP 1.01 OV 1.17 ! PT 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 HN 1.02 MK 1.03 NL 0.88 ! OV 1.10 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.02 HN 0.87 NL 0.88 SC 1.10 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.96 HN 1.04 MK 1.02 NL 1.17 ! SC 0.89 ! ! ! Correcting IF 2. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 1.04 NL 0.92 OV 1.10 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.93 HN 0.93 KP 1.00 ! NL 0.93 OV 1.17 PT 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 HN 1.13 KP 1.01 NL 1.03 ! OV 1.20 PT 0.89 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.95 OV 1.12 PT 0.92 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 1.15 KP 1.01 OV 1.19 ! PT 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 HN 1.02 MK 1.04 NL 0.89 ! OV 1.11 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.95 HN 0.88 NL 0.92 SC 1.16 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.92 HN 1.04 MK 1.04 NL 1.17 ! SC 0.89 ! ! ! Correcting IF 3. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 1.01 NL 0.92 OV 1.13 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.94 HN 0.91 KP 1.00 ! NL 0.93 OV 1.16 PT 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.11 HN 1.07 KP 1.00 NL 1.08 ! OV 1.13 PT 0.88 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 0.98 OV 1.11 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 1.13 KP 1.03 OV 1.13 ! PT 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 HN 1.02 MK 1.03 NL 0.88 ! OV 1.10 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.99 HN 0.83 NL 0.89 SC 1.18 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.98 HN 1.03 MK 1.01 NL 1.09 ! SC 0.93 ! ! ! Correcting IF 4. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 1.03 NL 0.91 OV 1.15 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.93 HN 0.91 KP 1.01 ! NL 0.94 OV 1.15 PT 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.02 HN 1.13 KP 1.00 NL 1.00 ! OV 1.18 PT 0.90 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 1.01 OV 1.09 PT 0.90 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 1.13 KP 1.03 OV 1.15 ! PT 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 HN 1.03 MK 1.01 NL 0.90 ! OV 1.09 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.00 HN 0.84 NL 0.88 SC 1.18 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.92 HN 1.02 MK 1.07 NL 1.16 ! SC 0.93 ! ! ! Correcting IF 5. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 1.04 NL 0.91 OV 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.93 HN 0.91 KP 1.00 ! NL 0.93 OV 1.15 PT 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.08 HN 1.08 KP 1.02 NL 1.12 ! OV 1.15 PT 0.93 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 0.94 OV 1.10 PT 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 FD 1.17 KP 1.02 OV 1.16 ! PT 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 HN 1.03 MK 1.04 NL 0.88 ! OV 1.11 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.06 HN 0.88 NL 0.88 SC 1.18 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.94 HN 1.03 MK 1.03 NL 1.18 ! SC 0.91 ! ! ! Correcting IF 6. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 1.06 NL 0.91 OV 1.15 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.93 HN 0.90 KP 0.98 ! NL 0.92 OV 1.17 PT 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.14 HN 1.09 KP 1.08 NL 1.17 ! OV 1.21 PT 0.94 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.94 OV 1.07 PT 0.93 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 1.22 KP 1.01 OV 1.16 ! PT 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 HN 1.06 MK 1.02 NL 0.88 ! OV 1.11 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.02 HN 0.86 NL 0.88 SC 1.27 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.96 HN 0.99 MK 1.05 NL 1.17 ! SC 0.90 ! ! ! Correcting IF 7. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 1.04 NL 0.92 OV 1.18 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.94 HN 0.91 KP 1.00 ! NL 0.93 OV 1.14 PT 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.02 HN 1.10 KP 0.98 NL 1.12 ! OV 1.25 PT 0.86 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 FD 1.00 OV 1.11 PT 0.93 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 1.18 KP 1.01 OV 1.16 ! PT 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 HN 1.01 MK 1.04 NL 0.87 ! OV 1.12 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.04 HN 0.87 NL 0.86 SC 1.29 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.94 HN 0.99 MK 1.02 NL 1.16 ! SC 0.90 ! ! ! Correcting IF 8. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.03 NL 0.92 OV 1.12 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.92 HN 0.90 KP 1.00 ! NL 0.93 OV 1.13 PT 0.87 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.04 HN 1.09 KP 0.90 NL 0.95 ! OV 1.10 PT 0.94 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 0.98 OV 1.11 PT 0.91 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 1.20 KP 1.03 OV 1.18 ! PT 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.05 HN 1.00 MK 1.02 NL 0.89 ! OV 1.09 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.01 HN 0.86 NL 0.90 SC 1.26 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.96 HN 0.97 MK 1.00 NL 1.19 ! SC 0.90 ! ! ! Fit before self-cal, rms=0.050618Jy sigma=0.826657 ! Fit after self-cal, rms=0.041221Jy sigma=0.637619 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.094 mas, bmaj=2.679 mas, bpa=-5.16 degrees ! Estimated noise=0.328528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000440514 Jy ! Component: 100 - total flux cleaned = -0.000543272 Jy ! Component: 150 - total flux cleaned = -0.000590053 Jy ! Component: 200 - total flux cleaned = -0.000653402 Jy ! Total flux subtracted in 200 components = -0.000653402 Jy ! Clean residual min=-0.001504 max=0.001500 Jy/beam ! Clean residual mean=-0.000020 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.270455 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.270455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041199Jy sigma=0.637000 ! Fit after self-cal, rms=0.041247Jy sigma=0.636598 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041247Jy sigma=0.636598 ! Fit after self-cal, rms=0.041140Jy sigma=0.633201 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.094 mas, bmaj=2.683 mas, bpa=-5.194 degrees ! Estimated noise=0.32861 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000360245 Jy ! Component: 100 - total flux cleaned = -0.000428077 Jy ! Component: 150 - total flux cleaned = -0.000469628 Jy ! Component: 200 - total flux cleaned = -0.000488301 Jy ! Total flux subtracted in 200 components = -0.000488301 Jy ! Clean residual min=-0.001509 max=0.001453 Jy/beam ! Clean residual mean=-0.000020 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.269967 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.269967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041122Jy sigma=0.632721 ! Fit after self-cal, rms=0.041121Jy sigma=0.632708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.73662e-05 Jy ! Component: 100 - total flux cleaned = -6.44637e-05 Jy ! Component: 150 - total flux cleaned = -8.07086e-05 Jy ! Component: 200 - total flux cleaned = -9.67729e-05 Jy ! Total flux subtracted in 200 components = -9.67729e-05 Jy ! Clean residual min=-0.001490 max=0.001399 Jy/beam ! Clean residual mean=-0.000020 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.26987 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.26987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041111Jy sigma=0.632415 ! Fit after self-cal, rms=0.041110Jy sigma=0.632406 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.041110Jy sigma=0.632406 ! Fit after self-cal, rms=0.040979Jy sigma=0.628031 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.095 mas, bmaj=2.687 mas, bpa=-5.238 degrees ! Estimated noise=0.328764 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000275446 Jy ! Component: 100 - total flux cleaned = -0.00029608 Jy ! Component: 150 - total flux cleaned = -0.000331233 Jy ! Component: 200 - total flux cleaned = -0.000346882 Jy ! Total flux subtracted in 200 components = -0.000346882 Jy ! Clean residual min=-0.001103 max=0.001392 Jy/beam ! Clean residual mean=-0.000004 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.269523 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.269523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040967Jy sigma=0.627659 ! Fit after self-cal, rms=0.040968Jy sigma=0.627648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669399 Jy ! Component: 100 - total flux cleaned = 0.000653427 Jy ! Component: 150 - total flux cleaned = 0.000537996 Jy ! Component: 200 - total flux cleaned = 0.000556366 Jy ! Total flux subtracted in 200 components = 0.000556366 Jy ! Clean residual min=-0.001008 max=0.000922 Jy/beam ! Clean residual mean=-0.000004 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.270079 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.270079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040922Jy sigma=0.626662 ! Fit after self-cal, rms=0.040919Jy sigma=0.626616 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040919Jy sigma=0.626616 ! Fit after self-cal, rms=0.040883Jy sigma=0.626446 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.089 mas, bmaj=3.936 mas, bpa=0.6203 degrees ! Estimated noise=0.387196 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133585 Jy ! Component: 100 - total flux cleaned = 7.14611e-05 Jy ! Component: 150 - total flux cleaned = 4.73533e-05 Jy ! Component: 200 - total flux cleaned = 1.62558e-05 Jy ! Total flux subtracted in 200 components = 1.62558e-05 Jy ! Clean residual min=-0.001067 max=0.001126 Jy/beam ! Clean residual mean=-0.000007 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.270096 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.270096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040874Jy sigma=0.626241 ! Fit after self-cal, rms=0.040872Jy sigma=0.626228 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.63955e-05 Jy ! Component: 100 - total flux cleaned = 7.69756e-05 Jy ! Component: 150 - total flux cleaned = 8.48305e-05 Jy ! Component: 200 - total flux cleaned = 0.000105685 Jy ! Total flux subtracted in 200 components = 0.000105685 Jy ! Clean residual min=-0.001043 max=0.001103 Jy/beam ! Clean residual mean=-0.000007 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.270201 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 86 components and 0.270201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040870Jy sigma=0.626161 ! Fit after self-cal, rms=0.040869Jy sigma=0.626157 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.094 mas, bmaj=2.69 mas, bpa=-5.262 degrees ! Estimated noise=0.328636 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.094 x 2.69 at -5.262 degrees (North through East) ! Clean map min=-0.0010257 max=0.24474 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8414 mas, bmaj=2.353 mas, bpa=-8.487 degrees ! Estimated noise=0.497433 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.191391 Jy ! Component: 100 - total flux cleaned = 0.239022 Jy ! Component: 150 - total flux cleaned = 0.254724 Jy ! Component: 200 - total flux cleaned = 0.261014 Jy ! Total flux subtracted in 200 components = 0.261014 Jy ! Clean residual min=-0.002159 max=0.002960 Jy/beam ! Clean residual mean=-0.000000 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.261014 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.261014 Jy ! Inverting map and beam ! Estimated beam: bmin=1.094 mas, bmaj=2.69 mas, bpa=-5.262 degrees ! Estimated noise=0.328636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396546 Jy ! Component: 100 - total flux cleaned = 0.00608493 Jy ! Component: 150 - total flux cleaned = 0.00741147 Jy ! Component: 200 - total flux cleaned = 0.00800176 Jy ! Total flux subtracted in 200 components = 0.00800176 Jy ! Clean residual min=-0.000929 max=0.000999 Jy/beam ! Clean residual mean=-0.000004 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.269016 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 0.269016 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.089 mas, bmaj=3.936 mas, bpa=0.6203 degrees ! Estimated noise=0.387196 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571357 Jy ! Component: 100 - total flux cleaned = 0.000837219 Jy ! Component: 150 - total flux cleaned = 0.000905167 Jy ! Component: 200 - total flux cleaned = 0.000947866 Jy ! Total flux subtracted in 200 components = 0.000947866 Jy ! Clean residual min=-0.001054 max=0.001144 Jy/beam ! Clean residual mean=-0.000007 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.269964 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.87299e-05 Jy ! Component: 100 - total flux cleaned = 7.99357e-05 Jy ! Component: 150 - total flux cleaned = 0.000116449 Jy ! Component: 200 - total flux cleaned = 0.000140219 Jy ! Total flux subtracted in 200 components = 0.000140219 Jy ! Clean residual min=-0.001028 max=0.001132 Jy/beam ! Clean residual mean=-0.000007 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.270104 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 74 components and 0.270104 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.094 mas, bmaj=2.69 mas, bpa=-5.262 degrees ! Estimated noise=0.328636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160654 Jy ! Component: 100 - total flux cleaned = -0.000178518 Jy ! Component: 150 - total flux cleaned = -0.000177851 Jy ! Component: 200 - total flux cleaned = -0.000161973 Jy ! Total flux subtracted in 200 components = -0.000161973 Jy ! Clean residual min=-0.000842 max=0.000873 Jy/beam ! Clean residual mean=-0.000004 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.269942 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 86 components and 0.269942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.040870Jy sigma=0.626083 ! Fit after self-cal, rms=0.040866Jy sigma=0.626040 wmodel J0010-0433_X_map.mod ! Writing 86 model components to file: J0010-0433_X_map.mod wobs J0010-0433_X_uvs.fits ! Writing UV FITS file: J0010-0433_X_uvs.fits wwins J0010-0433_X_map.win ! wwins: Wrote 2 windows to J0010-0433_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.71457e-05 Jy ! Component: 100 - total flux cleaned = 0.000217433 Jy ! Component: 150 - total flux cleaned = 0.000260571 Jy ! Component: 200 - total flux cleaned = 0.000260983 Jy ! Component: 250 - total flux cleaned = 0.000314821 Jy ! Component: 300 - total flux cleaned = 0.000262127 Jy ! Component: 350 - total flux cleaned = 0.000223827 Jy ! Component: 400 - total flux cleaned = 0.000223781 Jy ! Component: 450 - total flux cleaned = 0.000198905 Jy ! Component: 500 - total flux cleaned = 0.000150214 Jy ! Component: 550 - total flux cleaned = 0.000126008 Jy ! Component: 600 - total flux cleaned = 6.73594e-05 Jy ! Component: 650 - total flux cleaned = 4.42027e-05 Jy ! Component: 700 - total flux cleaned = -4.67663e-05 Jy ! Component: 750 - total flux cleaned = -9.17567e-05 Jy ! Component: 800 - total flux cleaned = -0.000146912 Jy ! Component: 850 - total flux cleaned = -0.000222721 Jy ! Component: 900 - total flux cleaned = -0.000265584 Jy ! Component: 950 - total flux cleaned = -0.000297253 Jy ! Component: 1000 - total flux cleaned = -0.000349328 Jy ! Component: 1050 - total flux cleaned = -0.000390304 Jy ! Component: 1100 - total flux cleaned = -0.000400497 Jy ! Component: 1150 - total flux cleaned = -0.000490847 Jy ! Component: 1200 - total flux cleaned = -0.000550282 Jy ! Component: 1250 - total flux cleaned = -0.000550254 Jy ! Component: 1300 - total flux cleaned = -0.000608478 Jy ! Component: 1350 - total flux cleaned = -0.000608409 Jy ! Component: 1400 - total flux cleaned = -0.000627308 Jy ! Component: 1450 - total flux cleaned = -0.000636737 Jy ! Component: 1500 - total flux cleaned = -0.000618213 Jy ! Component: 1550 - total flux cleaned = -0.000636635 Jy ! Component: 1600 - total flux cleaned = -0.000645934 Jy ! Component: 1650 - total flux cleaned = -0.00063691 Jy ! Component: 1700 - total flux cleaned = -0.000628114 Jy ! Component: 1750 - total flux cleaned = -0.000636878 Jy ! Component: 1800 - total flux cleaned = -0.000619494 Jy ! Component: 1850 - total flux cleaned = -0.00061946 Jy ! Component: 1900 - total flux cleaned = -0.000593771 Jy ! Component: 1950 - total flux cleaned = -0.000593722 Jy ! Component: 2000 - total flux cleaned = -0.000577075 Jy ! Component: 2050 - total flux cleaned = -0.000577163 Jy ! Component: 2100 - total flux cleaned = -0.000560555 Jy ! Component: 2150 - total flux cleaned = -0.000535971 Jy ! Component: 2200 - total flux cleaned = -0.000495624 Jy ! Component: 2250 - total flux cleaned = -0.000503601 Jy ! Component: 2300 - total flux cleaned = -0.000495545 Jy ! Component: 2350 - total flux cleaned = -0.000432388 Jy ! Component: 2400 - total flux cleaned = -0.000432517 Jy ! Component: 2450 - total flux cleaned = -0.000417109 Jy ! Component: 2500 - total flux cleaned = -0.000378722 Jy ! Component: 2550 - total flux cleaned = -0.000378836 Jy ! Component: 2600 - total flux cleaned = -0.000393891 Jy ! Component: 2650 - total flux cleaned = -0.000318833 Jy ! Component: 2700 - total flux cleaned = -0.000341252 Jy ! Component: 2750 - total flux cleaned = -0.000341258 Jy ! Component: 2800 - total flux cleaned = -0.000326551 Jy ! Component: 2850 - total flux cleaned = -0.000311942 Jy ! Component: 2900 - total flux cleaned = -0.000297393 Jy ! Component: 2950 - total flux cleaned = -0.000275763 Jy ! Component: 3000 - total flux cleaned = -0.000268539 Jy ! Component: 3050 - total flux cleaned = -0.000261473 Jy ! Component: 3100 - total flux cleaned = -0.000282397 Jy ! Component: 3150 - total flux cleaned = -0.000226601 Jy ! Component: 3200 - total flux cleaned = -0.000212758 Jy ! Component: 3250 - total flux cleaned = -0.000198954 Jy ! Component: 3300 - total flux cleaned = -0.000185306 Jy ! Component: 3350 - total flux cleaned = -0.000178486 Jy ! Component: 3400 - total flux cleaned = -0.000198763 Jy ! Component: 3450 - total flux cleaned = -0.000165216 Jy ! Component: 3500 - total flux cleaned = -0.000178521 Jy ! Component: 3550 - total flux cleaned = -0.000165323 Jy ! Component: 3600 - total flux cleaned = -0.000158769 Jy ! Component: 3650 - total flux cleaned = -0.000152209 Jy ! Component: 3700 - total flux cleaned = -0.00014568 Jy ! Component: 3750 - total flux cleaned = -0.000126307 Jy ! Component: 3800 - total flux cleaned = -0.000113523 Jy ! Component: 3850 - total flux cleaned = -0.000119967 Jy ! Component: 3900 - total flux cleaned = -0.000126331 Jy ! Component: 3950 - total flux cleaned = -0.000126348 Jy ! Component: 4000 - total flux cleaned = -0.000113865 Jy ! Component: 4050 - total flux cleaned = -0.000144907 Jy ! Total flux subtracted in 4096 components = -0.000144863 Jy ! Clean residual min=-0.000457 max=0.000421 Jy/beam ! Clean residual mean=-0.000002 rms=0.000112 Jy/beam ! Combined flux in latest and established models = 0.269797 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 390 components and 0.269797 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0010-0433_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.094 x 2.69 at -5.262 degrees (North through East) ! Clean map min=-0.00080855 max=0.24534 Jy/beam ! Writing clean map to FITS file: .//J0010-0433_X_map.fits wmodel .//J0010-0433_X_map.mod ! Writing 390 model components to file: .//J0010-0433_X_map.mod wobs .//J0010-0433_X_uvs.fits ! Writing UV FITS file: .//J0010-0433_X_uvs.fits wwins .//J0010-0433_X_map.win ! wwins: Wrote 3 windows to .//J0010-0433_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.245342 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000111889 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.136816 0.136816 0.273631 0.547262 1.09452 2.18905 4.3781 8.7562 17.5124 35.0248 70.0496 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.245 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2192.73 quit ! Quitting program ! Log file .//J0010-0433_X_dfm.log closed on Sun Jan 19 23:41:31 2020