! Started logfile: .//J0010-0433_C_dfm.log on Sun Jan 19 23:41:21 2020 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs .//J0010-0433_C_uvm.fits ! Reading UV FITS file: .//J0010-0433_C_uvm.fits ! AN table 1: 103 integrations on 6 of 6 possible baselines. ! AN table 2: 33 integrations on 21 of 21 possible baselines. ! AN table 3: 17 integrations on 15 of 15 possible baselines. ! AN table 4: 31 integrations on 3 of 3 possible baselines. ! AN table 5: 15 integrations on 6 of 6 possible baselines. ! AN table 6: 31 integrations on 10 of 10 possible baselines. ! AN table 7: 34 integrations on 10 of 10 possible baselines. ! AN table 8: 20 integrations on 6 of 6 possible baselines. ! AN table 9: 18 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.804001 visibilities/baseline/integration-bin. ! Found source: J0010-0433 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 17360 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_01.dfm J0010-0433_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 259 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 93 telescope corrections were flagged in sub-array 4. ! A total of 60 telescope corrections were flagged in sub-array 5. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 259 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 93 telescope corrections were flagged in sub-array 4. ! A total of 60 telescope corrections were flagged in sub-array 5. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 259 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 93 telescope corrections were flagged in sub-array 4. ! A total of 60 telescope corrections were flagged in sub-array 5. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 367 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 46 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 5. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 6. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 7. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 8. ! A total of 101 telescope corrections were flagged in sub-array 1. ! A total of 22 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 15 telescope corrections were flagged in sub-array 6. ! A total of 21 telescope corrections were flagged in sub-array 7. ! A total of 4 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=1.036069Jy sigma=18.980389 ! Fit after self-cal, rms=0.754979Jy sigma=13.814764 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.442 mas, bmaj=3.957 mas, bpa=-8.182 degrees ! Estimated noise=0.451923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.193396 Jy ! Component: 100 - total flux cleaned = 0.235614 Jy ! Total flux subtracted in 100 components = 0.235614 Jy ! Clean residual min=-0.007976 max=0.012216 Jy/beam ! Clean residual mean=-0.000004 rms=0.001478 Jy/beam ! Combined flux in latest and established models = 0.235614 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.235614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056815Jy sigma=0.953786 ! Fit after self-cal, rms=0.056800Jy sigma=0.953619 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109057 Jy ! Component: 100 - total flux cleaned = 0.0128261 Jy ! Total flux subtracted in 100 components = 0.0128261 Jy ! Clean residual min=-0.006939 max=0.005557 Jy/beam ! Clean residual mean=-0.000006 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 0.24844 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 0.24844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055205Jy sigma=0.922964 ! Fit after self-cal, rms=0.055197Jy sigma=0.922927 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.944 mas, bmaj=4.911 mas, bpa=-4.896 degrees ! Estimated noise=0.317378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118491 Jy ! Component: 100 - total flux cleaned = -0.00147249 Jy ! Component: 150 - total flux cleaned = -0.00180671 Jy ! Component: 200 - total flux cleaned = -0.00211489 Jy ! Total flux subtracted in 200 components = -0.00211489 Jy ! Clean residual min=-0.006453 max=0.005585 Jy/beam ! Clean residual mean=0.000004 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 0.246325 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.246325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054493Jy sigma=0.912126 ! Fit after self-cal, rms=0.054486Jy sigma=0.912113 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.944 x 4.911 at -4.896 degrees (North through East) ! Clean map min=-0.0063391 max=0.24714 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 HN 1.02 NL 1.01 OV 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 HN 0.93 KP 0.98 ! NL 1.03 OV 1.01 PT 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! FD 3.98 HN 1.06 KP 1.81 NL 1.01 ! OV 1.27 PT 1.65 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* OV 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 1.01 KP 0.96 OV 0.97 ! PT 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.01 HN 0.97 MK 0.95 NL 0.99 ! OV 1.16 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.91 HN 0.97 NL 0.83 SC 1.32 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.00 HN 0.97 MK 1.06 NL 1.02 ! SC 0.96 ! ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 1.00 NL 0.97 OV 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 0.93 KP 0.98 ! NL 1.01 OV 1.03 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 3.15 HN 0.95 KP 1.71 NL 1.02 ! OV 1.23 PT 1.63 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* OV 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00 FD 1.10 KP 0.97 OV 0.95 ! PT 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 HN 0.95 MK 0.93 NL 0.96 ! OV 1.22 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.97 HN 0.98 NL 0.84 SC 1.13 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.03 HN 0.92 MK 0.94 NL 1.01 ! SC 1.02 ! ! ! Correcting IF 3. ! A total of 93 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 HN 0.94 NL 1.01 OV 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.98 HN 0.89 KP 1.00 ! NL 1.00 OV 1.01 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.06 HN 0.95 KP 1.00 NL 1.02 ! OV 0.98 PT 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* OV 0.00* PT 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.98 FD 1.10 KP 0.97 OV 0.94 ! PT 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 HN 0.95 MK 0.96 NL 0.98 ! OV 0.97 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.96 HN 0.97 NL 0.97 SC 1.12 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.96 HN 0.96 MK 0.98 NL 0.93 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* HN 0.00* NL 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 0.88 KP 1.01 ! NL 1.01 OV 1.00 PT 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 HN 0.96 KP 0.99 NL 1.02 ! OV 0.98 PT 0.93 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 FD 0.98 OV 0.92 PT 0.94 ! ! A total of 45 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* FD 0.99 KP 0.93 OV 0.96 ! PT 0.90 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.98 HN 0.99 MK 1.00 NL 0.97 ! OV 0.92 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.01 HN 0.94 NL 0.96 SC 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.01 HN 0.97 MK 0.98 NL 1.00 ! SC 0.97 ! ! ! Correcting IF 5. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.96 NL 0.94 OV 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 HN 0.89 KP 1.01 ! NL 1.00 OV 1.01 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.02 HN 0.95 KP 0.98 NL 1.06 ! OV 0.96 PT 0.99 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 0.97 OV 0.95 PT 0.94 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.94 FD 1.01 KP 0.94 OV 0.95 ! PT 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.96 HN 0.95 MK 0.96 NL 0.97 ! OV 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.02 HN 0.97 NL 0.99 SC 1.12 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.94 HN 0.95 MK 1.02 NL 0.92 ! SC 0.98 ! ! ! Correcting IF 6. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.97 NL 0.95 OV 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.41 HN 0.91 KP 1.07 ! NL 1.01 OV 1.00 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.20 HN 0.94 KP 1.10 NL 1.01 ! OV 0.98 PT 0.96 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 0.97 OV 0.95 PT 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 1.00 KP 0.95 OV 0.95 ! PT 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.98 HN 0.96 MK 0.98 NL 0.98 ! OV 0.92 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.03 HN 0.99 NL 0.93 SC 1.16 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.98 HN 0.97 MK 1.00 NL 0.92 ! SC 1.00 ! ! ! Correcting IF 7. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.98 NL 0.96 OV 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.51 HN 0.92 KP 1.11 ! NL 1.00 OV 1.00 PT 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.17 HN 0.94 KP 1.05 NL 1.03 ! OV 1.05 PT 0.99 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 0.95 OV 0.98 PT 0.96 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 1.02 KP 0.93 OV 0.98 ! PT 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.98 HN 0.97 MK 1.02 NL 0.99 ! OV 0.93 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.04 HN 0.96 NL 0.94 SC 1.11 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 1.01 HN 0.94 MK 0.97 NL 0.99 ! SC 1.00 ! ! ! Correcting IF 8. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.98 NL 0.99 OV 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.52 HN 0.90 KP 1.11 ! NL 1.01 OV 1.01 PT 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.25 HN 0.99 KP 1.06 NL 0.99 ! OV 1.06 PT 0.94 ! ! A total of 90 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 1.00 OV 0.95 PT 0.97 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 1.03 KP 0.95 OV 0.94 ! PT 0.93 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.99 HN 0.99 MK 0.98 NL 0.97 ! OV 0.93 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.08 HN 0.96 NL 0.94 SC 1.12 ! ! A total of 3 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.97 HN 0.96 MK 1.00 NL 0.95 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.054486Jy sigma=0.912113 ! Fit after self-cal, rms=0.053476Jy sigma=0.703264 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.906 mas, bmaj=4.773 mas, bpa=-6.673 degrees ! Estimated noise=0.331944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000228902 Jy ! Component: 100 - total flux cleaned = 0.000200728 Jy ! Component: 150 - total flux cleaned = 0.000201113 Jy ! Component: 200 - total flux cleaned = 0.000201862 Jy ! Total flux subtracted in 200 components = 0.000201862 Jy ! Clean residual min=-0.002078 max=0.002614 Jy/beam ! Clean residual mean=-0.000002 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.246527 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.246527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053451Jy sigma=0.702673 ! Fit after self-cal, rms=0.054051Jy sigma=0.702080 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054051Jy sigma=0.702080 ! Fit after self-cal, rms=0.053712Jy sigma=0.675497 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.904 mas, bmaj=4.768 mas, bpa=-6.643 degrees ! Estimated noise=0.332982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113423 Jy ! Component: 100 - total flux cleaned = 0.00119606 Jy ! Component: 150 - total flux cleaned = 0.0011735 Jy ! Component: 200 - total flux cleaned = 0.00117513 Jy ! Total flux subtracted in 200 components = 0.00117513 Jy ! Clean residual min=-0.001608 max=0.001725 Jy/beam ! Clean residual mean=-0.000002 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.247702 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.247702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053694Jy sigma=0.674426 ! Fit after self-cal, rms=0.053711Jy sigma=0.674403 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.10055e-06 Jy ! Component: 100 - total flux cleaned = -5.07557e-06 Jy ! Component: 150 - total flux cleaned = -4.72175e-06 Jy ! Component: 200 - total flux cleaned = -4.39189e-06 Jy ! Total flux subtracted in 200 components = -4.39189e-06 Jy ! Clean residual min=-0.001589 max=0.001735 Jy/beam ! Clean residual mean=-0.000002 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.247698 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 29 components and 0.247698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053703Jy sigma=0.674212 ! Fit after self-cal, rms=0.053704Jy sigma=0.674207 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053704Jy sigma=0.674207 ! Fit after self-cal, rms=0.053200Jy sigma=0.645576 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.903 mas, bmaj=4.764 mas, bpa=-6.621 degrees ! Estimated noise=0.333108 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000448937 Jy ! Component: 100 - total flux cleaned = 0.000478072 Jy ! Component: 150 - total flux cleaned = 0.000504061 Jy ! Component: 200 - total flux cleaned = 0.000516096 Jy ! Total flux subtracted in 200 components = 0.000516096 Jy ! Clean residual min=-0.000912 max=0.001368 Jy/beam ! Clean residual mean=0.000002 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.248214 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.248214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053195Jy sigma=0.645366 ! Fit after self-cal, rms=0.053202Jy sigma=0.645336 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119066 Jy ! Component: 100 - total flux cleaned = 0.00141248 Jy ! Component: 150 - total flux cleaned = 0.00152456 Jy ! Component: 200 - total flux cleaned = 0.00161409 Jy ! Total flux subtracted in 200 components = 0.00161409 Jy ! Clean residual min=-0.000898 max=0.001152 Jy/beam ! Clean residual mean=0.000002 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.249828 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.249828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053167Jy sigma=0.644654 ! Fit after self-cal, rms=0.053168Jy sigma=0.644608 ! Inverting map ! Added new window around map position (-0.9, 18.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000930962 Jy ! Component: 100 - total flux cleaned = 0.00135513 Jy ! Component: 150 - total flux cleaned = 0.00152383 Jy ! Component: 200 - total flux cleaned = 0.0016472 Jy ! Total flux subtracted in 200 components = 0.0016472 Jy ! Clean residual min=-0.000883 max=0.000862 Jy/beam ! Clean residual mean=0.000002 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.251475 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 80 components and 0.251475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053134Jy sigma=0.644261 ! Fit after self-cal, rms=0.053134Jy sigma=0.644217 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053134Jy sigma=0.644217 ! Fit after self-cal, rms=0.053108Jy sigma=0.643990 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=7.009 mas, bpa=-1.07 degrees ! Estimated noise=0.392093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000575213 Jy ! Component: 100 - total flux cleaned = 0.000939578 Jy ! Component: 150 - total flux cleaned = 0.00124274 Jy ! Component: 200 - total flux cleaned = 0.00147594 Jy ! Total flux subtracted in 200 components = 0.00147594 Jy ! Clean residual min=-0.000947 max=0.000919 Jy/beam ! Clean residual mean=0.000003 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.252951 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 102 components and 0.252951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053094Jy sigma=0.643907 ! Fit after self-cal, rms=0.053092Jy sigma=0.643899 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196525 Jy ! Component: 100 - total flux cleaned = 0.000297205 Jy ! Component: 150 - total flux cleaned = 0.000364821 Jy ! Component: 200 - total flux cleaned = 0.000434959 Jy ! Total flux subtracted in 200 components = 0.000434959 Jy ! Clean residual min=-0.000945 max=0.000911 Jy/beam ! Clean residual mean=0.000003 rms=0.000252 Jy/beam ! Combined flux in latest and established models = 0.253386 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 109 components and 0.253386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053088Jy sigma=0.643876 ! Fit after self-cal, rms=0.053088Jy sigma=0.643873 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.902 mas, bmaj=4.762 mas, bpa=-6.603 degrees ! Estimated noise=0.332967 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.902 x 4.762 at -6.603 degrees (North through East) ! Clean map min=-0.00086151 max=0.24632 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.417 mas, bmaj=3.96 mas, bpa=-8.998 degrees ! Estimated noise=0.45694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.190928 Jy ! Component: 100 - total flux cleaned = 0.232572 Jy ! Component: 150 - total flux cleaned = 0.242691 Jy ! Component: 200 - total flux cleaned = 0.246609 Jy ! Total flux subtracted in 200 components = 0.246609 Jy ! Clean residual min=-0.001890 max=0.002487 Jy/beam ! Clean residual mean=0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.246609 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.246609 Jy ! Inverting map and beam ! Estimated beam: bmin=1.902 mas, bmaj=4.762 mas, bpa=-6.603 degrees ! Estimated noise=0.332967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.9, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221495 Jy ! Component: 100 - total flux cleaned = 0.0034054 Jy ! Component: 150 - total flux cleaned = 0.00435863 Jy ! Component: 200 - total flux cleaned = 0.00484352 Jy ! Total flux subtracted in 200 components = 0.00484352 Jy ! Clean residual min=-0.001216 max=0.000959 Jy/beam ! Clean residual mean=0.000001 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.251452 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.251452 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=7.009 mas, bpa=-1.07 degrees ! Estimated noise=0.392093 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100758 Jy ! Component: 100 - total flux cleaned = 0.00155784 Jy ! Component: 150 - total flux cleaned = 0.00174132 Jy ! Component: 200 - total flux cleaned = 0.00195098 Jy ! Total flux subtracted in 200 components = 0.00195098 Jy ! Clean residual min=-0.001061 max=0.000958 Jy/beam ! Clean residual mean=0.000002 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.253403 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014775 Jy ! Component: 100 - total flux cleaned = 0.000283387 Jy ! Component: 150 - total flux cleaned = 0.000406683 Jy ! Component: 200 - total flux cleaned = 0.000519923 Jy ! Total flux subtracted in 200 components = 0.000519923 Jy ! Clean residual min=-0.001015 max=0.000931 Jy/beam ! Clean residual mean=0.000002 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.253923 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 78 components and 0.253923 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.902 mas, bmaj=4.762 mas, bpa=-6.603 degrees ! Estimated noise=0.332967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103609 Jy ! Component: 100 - total flux cleaned = -2.1209e-05 Jy ! Component: 150 - total flux cleaned = 3.31357e-06 Jy ! Component: 200 - total flux cleaned = 7.07542e-05 Jy ! Total flux subtracted in 200 components = 7.07542e-05 Jy ! Clean residual min=-0.000839 max=0.000915 Jy/beam ! Clean residual mean=0.000001 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.253994 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 95 components and 0.253994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.053120Jy sigma=0.644471 ! Fit after self-cal, rms=0.053117Jy sigma=0.644373 wmodel J0010-0433_C_map.mod ! Writing 95 model components to file: J0010-0433_C_map.mod wobs J0010-0433_C_uvs.fits ! Writing UV FITS file: J0010-0433_C_uvs.fits wwins J0010-0433_C_map.win ! wwins: Wrote 4 windows to J0010-0433_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.89328e-06 Jy ! Component: 100 - total flux cleaned = -8.92333e-05 Jy ! Component: 150 - total flux cleaned = -0.00023507 Jy ! Component: 200 - total flux cleaned = -0.000332886 Jy ! Component: 250 - total flux cleaned = -0.000427201 Jy ! Component: 300 - total flux cleaned = -0.000492679 Jy ! Component: 350 - total flux cleaned = -0.000581979 Jy ! Component: 400 - total flux cleaned = -0.000656574 Jy ! Component: 450 - total flux cleaned = -0.000717309 Jy ! Component: 500 - total flux cleaned = -0.000777024 Jy ! Component: 550 - total flux cleaned = -0.000823994 Jy ! Component: 600 - total flux cleaned = -0.000870287 Jy ! Component: 650 - total flux cleaned = -0.000938624 Jy ! Component: 700 - total flux cleaned = -0.000972278 Jy ! Component: 750 - total flux cleaned = -0.00102782 Jy ! Component: 800 - total flux cleaned = -0.00107161 Jy ! Component: 850 - total flux cleaned = -0.00110405 Jy ! Component: 900 - total flux cleaned = -0.00115743 Jy ! Component: 950 - total flux cleaned = -0.00118893 Jy ! Component: 1000 - total flux cleaned = -0.00125147 Jy ! Component: 1050 - total flux cleaned = -0.001272 Jy ! Component: 1100 - total flux cleaned = -0.00133313 Jy ! Component: 1150 - total flux cleaned = -0.00135333 Jy ! Component: 1200 - total flux cleaned = -0.00140337 Jy ! Component: 1250 - total flux cleaned = -0.00151205 Jy ! Component: 1300 - total flux cleaned = -0.00152185 Jy ! Component: 1350 - total flux cleaned = -0.00160901 Jy ! Component: 1400 - total flux cleaned = -0.00165693 Jy ! Component: 1450 - total flux cleaned = -0.0017139 Jy ! Component: 1500 - total flux cleaned = -0.00174214 Jy ! Component: 1550 - total flux cleaned = -0.00179813 Jy ! Component: 1600 - total flux cleaned = -0.00182577 Jy ! Component: 1650 - total flux cleaned = -0.00188088 Jy ! Component: 1700 - total flux cleaned = -0.00193546 Jy ! Component: 1750 - total flux cleaned = -0.0019804 Jy ! Component: 1800 - total flux cleaned = -0.00199835 Jy ! Component: 1850 - total flux cleaned = -0.0020693 Jy ! Component: 1900 - total flux cleaned = -0.00210426 Jy ! Component: 1950 - total flux cleaned = -0.0021217 Jy ! Component: 2000 - total flux cleaned = -0.00217358 Jy ! Component: 2050 - total flux cleaned = -0.00220787 Jy ! Component: 2100 - total flux cleaned = -0.00223334 Jy ! Component: 2150 - total flux cleaned = -0.00222488 Jy ! Component: 2200 - total flux cleaned = -0.00225001 Jy ! Component: 2250 - total flux cleaned = -0.00229164 Jy ! Component: 2300 - total flux cleaned = -0.00228329 Jy ! Component: 2350 - total flux cleaned = -0.00234076 Jy ! Component: 2400 - total flux cleaned = -0.00234072 Jy ! Component: 2450 - total flux cleaned = -0.00238101 Jy ! Component: 2500 - total flux cleaned = -0.00240496 Jy ! Component: 2550 - total flux cleaned = -0.00240494 Jy ! Component: 2600 - total flux cleaned = -0.00244435 Jy ! Component: 2650 - total flux cleaned = -0.00247571 Jy ! Component: 2700 - total flux cleaned = -0.0024601 Jy ! Component: 2750 - total flux cleaned = -0.00246798 Jy ! Component: 2800 - total flux cleaned = -0.00249099 Jy ! Component: 2850 - total flux cleaned = -0.00251396 Jy ! Component: 2900 - total flux cleaned = -0.00249125 Jy ! Component: 2950 - total flux cleaned = -0.00251385 Jy ! Component: 3000 - total flux cleaned = -0.00252141 Jy ! Component: 3050 - total flux cleaned = -0.00249911 Jy ! Component: 3100 - total flux cleaned = -0.00252872 Jy ! Component: 3150 - total flux cleaned = -0.0025507 Jy ! Component: 3200 - total flux cleaned = -0.00255797 Jy ! Component: 3250 - total flux cleaned = -0.00252172 Jy ! Component: 3300 - total flux cleaned = -0.00251451 Jy ! Component: 3350 - total flux cleaned = -0.00252169 Jy ! Component: 3400 - total flux cleaned = -0.00253599 Jy ! Component: 3450 - total flux cleaned = -0.0025431 Jy ! Component: 3500 - total flux cleaned = -0.00255717 Jy ! Component: 3550 - total flux cleaned = -0.00255708 Jy ! Component: 3600 - total flux cleaned = -0.0025362 Jy ! Component: 3650 - total flux cleaned = -0.00255694 Jy ! Component: 3700 - total flux cleaned = -0.00256377 Jy ! Component: 3750 - total flux cleaned = -0.00258427 Jy ! Component: 3800 - total flux cleaned = -0.00259108 Jy ! Component: 3850 - total flux cleaned = -0.00256401 Jy ! Component: 3900 - total flux cleaned = -0.00259095 Jy ! Component: 3950 - total flux cleaned = -0.00259093 Jy ! Component: 4000 - total flux cleaned = -0.00262418 Jy ! Component: 4050 - total flux cleaned = -0.00261093 Jy ! Total flux subtracted in 4096 components = -0.00263072 Jy ! Clean residual min=-0.000454 max=0.000386 Jy/beam ! Clean residual mean=0.000001 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.251363 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 390 components and 0.251363 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0010-0433_C_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.902 x 4.762 at -6.603 degrees (North through East) ! Clean map min=-0.00078985 max=0.24505 Jy/beam ! Writing clean map to FITS file: .//J0010-0433_C_map.fits wmodel .//J0010-0433_C_map.mod ! Writing 390 model components to file: .//J0010-0433_C_map.mod wobs .//J0010-0433_C_uvs.fits ! Writing UV FITS file: .//J0010-0433_C_uvs.fits wwins .//J0010-0433_C_map.win ! wwins: Wrote 5 windows to .//J0010-0433_C_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.245047 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000122404 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.149853 0.149853 0.299707 0.599413 1.19883 2.39765 4.79531 9.59061 19.1812 38.3624 76.7249 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.245 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2001.96 quit ! Quitting program ! Log file .//J0010-0433_C_dfm.log closed on Sun Jan 19 23:41:25 2020