! Started logfile: .//J0006-0623_X_dfm.log on Sun Jan 19 23:41:08 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 7.39200 obs .//J0006-0623_X_uvm.fits ! Reading UV FITS file: .//J0006-0623_X_uvm.fits ! AN table 1: 54 integrations on 28 of 28 possible baselines. ! AN table 2: 30 integrations on 15 of 15 possible baselines. ! AN table 3: 32 integrations on 3 of 3 possible baselines. ! AN table 4: 81 integrations on 10 of 10 possible baselines. ! AN table 5: 68 integrations on 21 of 21 possible baselines. ! AN table 6: 51 integrations on 28 of 28 possible baselines. ! AN table 7: 52 integrations on 28 of 28 possible baselines. ! AN table 8: 17 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.609415 visibilities/baseline/integration-bin. ! Found source: J0006-0623 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 36248 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0006-0623_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 5. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 6. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 7. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 8. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=3.301574Jy sigma=62.072047 ! Fit after self-cal, rms=2.182003Jy sigma=40.884045 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9861 mas, bmaj=2.452 mas, bpa=-3.763 degrees ! Estimated noise=0.336756 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.27732 Jy ! Component: 100 - total flux cleaned = 2.83668 Jy ! Total flux subtracted in 100 components = 2.83668 Jy ! Clean residual min=-0.098288 max=0.201625 Jy/beam ! Clean residual mean=0.000061 rms=0.020248 Jy/beam ! Combined flux in latest and established models = 2.83668 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 2.83668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.628449Jy sigma=11.481953 ! Fit after self-cal, rms=0.628337Jy sigma=11.477743 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.210364 Jy ! Component: 100 - total flux cleaned = 0.315024 Jy ! Total flux subtracted in 100 components = 0.315024 Jy ! Clean residual min=-0.080067 max=0.121605 Jy/beam ! Clean residual mean=-0.000027 rms=0.016877 Jy/beam ! Combined flux in latest and established models = 3.1517 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 14 components and 3.1517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.511785Jy sigma=9.311524 ! Fit after self-cal, rms=0.511716Jy sigma=9.307738 ! Inverting map ! Added new window around map position (-3.6, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119461 Jy ! Component: 100 - total flux cleaned = 0.197596 Jy ! Total flux subtracted in 100 components = 0.197596 Jy ! Clean residual min=-0.082206 max=0.100879 Jy/beam ! Clean residual mean=-0.000071 rms=0.015216 Jy/beam ! Combined flux in latest and established models = 3.3493 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 3.3493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.459936Jy sigma=8.238254 ! Fit after self-cal, rms=0.458315Jy sigma=8.209598 ! Inverting map ! Added new window around map position (4.4, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.08988 Jy ! Component: 100 - total flux cleaned = 0.138373 Jy ! Total flux subtracted in 100 components = 0.138373 Jy ! Clean residual min=-0.075649 max=0.083981 Jy/beam ! Clean residual mean=-0.000105 rms=0.014105 Jy/beam ! Combined flux in latest and established models = 3.48767 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 3.48767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.434688Jy sigma=7.758545 ! Fit after self-cal, rms=0.433592Jy sigma=7.737849 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.341 mas, bmaj=3.176 mas, bpa=-3.077 degrees ! Estimated noise=0.201295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110386 Jy ! Component: 100 - total flux cleaned = 0.189992 Jy ! Component: 150 - total flux cleaned = 0.250893 Jy ! Component: 200 - total flux cleaned = 0.293767 Jy ! Total flux subtracted in 200 components = 0.293767 Jy ! Clean residual min=-0.085118 max=0.089690 Jy/beam ! Clean residual mean=-0.000110 rms=0.019748 Jy/beam ! Combined flux in latest and established models = 3.78144 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 77 components and 3.78144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.395403Jy sigma=6.949114 ! Fit after self-cal, rms=0.394146Jy sigma=6.926407 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.341 x 3.176 at -3.077 degrees (North through East) ! Clean map min=-0.085012 max=3.052 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.07 KP 1.05 ! LA 0.99 NL 0.96 OV 1.11 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 0.90 KP 0.99 NL 0.95 ! OV 1.14 PT 0.88 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.98 NL 0.92 OV 1.07 ! PT 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.91 HN 1.06 KP 0.99 ! NL 0.95 OV 1.10 PT 0.90 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 0.97 KP 1.00 MK 1.02 ! NL 0.92 OV 1.06 PT 0.90 SC 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 KP 1.03 LA 0.99 MK 0.99 ! NL 1.22 OV 1.13 PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.09 HN 1.10 KP 1.19 LA 1.04 ! NL 1.02 PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.07 KP 1.06 ! LA 1.00 NL 0.96 OV 1.10 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 0.89 KP 0.99 NL 0.96 ! OV 1.13 PT 0.87 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.99 NL 0.92 OV 1.07 ! PT 0.93 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.90 HN 1.05 KP 1.00 ! NL 0.94 OV 1.10 PT 0.90 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 0.98 KP 0.99 MK 1.01 ! NL 0.93 OV 1.05 PT 0.90 SC 1.04 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 KP 1.03 LA 1.00 MK 1.00 ! NL 1.24 OV 1.12 PT 0.94 SC 0.97 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.08 HN 1.09 KP 1.19 LA 1.04 ! NL 1.01 PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.07 KP 1.05 ! LA 0.99 NL 0.96 OV 1.10 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 0.89 KP 0.99 NL 0.96 ! OV 1.13 PT 0.87 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.98 NL 0.92 OV 1.07 ! PT 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 0.91 HN 1.05 KP 0.99 ! NL 0.95 OV 1.10 PT 0.90 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.01 FD 0.98 KP 0.98 MK 1.03 ! NL 0.93 OV 1.06 PT 0.91 SC 1.05 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 KP 1.03 LA 1.00 MK 0.99 ! NL 1.23 OV 1.11 PT 0.94 SC 0.97 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.10 HN 1.09 KP 1.20 LA 1.03 ! NL 1.02 PT 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.07 KP 1.05 ! LA 1.00 NL 0.96 OV 1.09 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 0.90 KP 0.98 NL 0.95 ! OV 1.13 PT 0.87 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.98 NL 0.92 OV 1.07 ! PT 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.90 HN 1.04 KP 0.99 ! NL 0.94 OV 1.09 PT 0.90 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.03 FD 0.98 KP 0.99 MK 1.01 ! NL 0.92 OV 1.06 PT 0.90 SC 1.06 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 KP 1.03 LA 0.98 MK 1.00 ! NL 1.26 OV 1.11 PT 0.94 SC 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.11 HN 1.10 KP 1.18 LA 1.03 ! NL 1.01 PT 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.07 KP 1.05 ! LA 1.00 NL 0.96 OV 1.09 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 HN 0.89 KP 0.97 NL 0.94 ! OV 1.11 PT 0.87 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.98 NL 0.90 OV 1.06 ! PT 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.90 HN 1.03 KP 0.98 ! NL 0.92 OV 1.08 PT 0.90 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.03 FD 0.98 KP 0.98 MK 1.01 ! NL 0.93 OV 1.06 PT 0.90 SC 1.07 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 KP 1.02 LA 0.99 MK 1.00 ! NL 1.23 OV 1.09 PT 0.93 SC 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.10 HN 1.09 KP 1.17 LA 1.04 ! NL 1.00 PT 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.08 KP 1.05 ! LA 1.00 NL 0.95 OV 1.09 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 0.90 KP 0.98 NL 0.95 ! OV 1.10 PT 0.87 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.98 NL 0.89 OV 1.07 ! PT 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.88 HN 1.02 KP 0.98 ! NL 0.92 OV 1.08 PT 0.90 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.03 FD 0.99 KP 0.98 MK 1.02 ! NL 0.91 OV 1.06 PT 0.89 SC 1.09 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.03 KP 1.02 LA 0.99 MK 1.00 ! NL 1.23 OV 1.09 PT 0.93 SC 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.11 HN 1.09 KP 1.20 LA 1.05 ! NL 1.01 PT 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.08 KP 1.06 ! LA 1.00 NL 0.95 OV 1.09 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 HN 0.89 KP 0.98 NL 0.94 ! OV 1.09 PT 0.87 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.99 NL 0.91 OV 1.06 ! PT 0.93 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.88 HN 1.02 KP 0.99 ! NL 0.92 OV 1.08 PT 0.89 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.02 FD 0.99 KP 0.98 MK 1.01 ! NL 0.92 OV 1.04 PT 0.90 SC 1.07 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 KP 1.02 LA 0.98 MK 1.01 ! NL 1.28 OV 1.08 PT 0.93 SC 0.95 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.11 HN 1.09 KP 1.20 LA 1.05 ! NL 1.01 PT 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.08 KP 1.05 ! LA 1.00 NL 0.96 OV 1.09 PT 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 HN 0.90 KP 0.97 NL 0.94 ! OV 1.11 PT 0.87 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.00 NL 0.90 OV 1.07 ! PT 0.93 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 0.89 HN 1.03 KP 0.98 ! NL 0.92 OV 1.08 PT 0.89 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.04 FD 0.99 KP 0.98 MK 1.03 ! NL 0.93 OV 1.04 PT 0.91 SC 1.08 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 KP 1.02 LA 0.99 MK 1.01 ! NL 1.25 OV 1.08 PT 0.93 SC 0.96 ! ! Telescope amplitude corrections in sub-array 8: ! FD 1.09 HN 1.10 KP 1.20 LA 1.04 ! NL 1.00 PT 1.00 ! ! ! Fit before self-cal, rms=0.394146Jy sigma=6.926407 ! Fit after self-cal, rms=0.200337Jy sigma=3.755370 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.347 mas, bmaj=3.181 mas, bpa=-2.717 degrees ! Estimated noise=0.202332 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.2, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0536654 Jy ! Component: 100 - total flux cleaned = 0.0710478 Jy ! Component: 150 - total flux cleaned = 0.0733595 Jy ! Component: 200 - total flux cleaned = 0.075362 Jy ! Total flux subtracted in 200 components = 0.075362 Jy ! Clean residual min=-0.032981 max=0.032976 Jy/beam ! Clean residual mean=-0.000006 rms=0.007149 Jy/beam ! Combined flux in latest and established models = 3.8568 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 117 components and 3.8568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.174864Jy sigma=3.253406 ! Fit after self-cal, rms=0.171725Jy sigma=3.201769 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.171725Jy sigma=3.201769 ! Fit after self-cal, rms=0.118478Jy sigma=2.157700 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.347 mas, bmaj=3.18 mas, bpa=-2.721 degrees ! Estimated noise=0.201912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217934 Jy ! Component: 100 - total flux cleaned = 0.0293977 Jy ! Component: 150 - total flux cleaned = 0.0339475 Jy ! Component: 200 - total flux cleaned = 0.0358453 Jy ! Total flux subtracted in 200 components = 0.0358453 Jy ! Clean residual min=-0.025375 max=0.017858 Jy/beam ! Clean residual mean=-0.000005 rms=0.004187 Jy/beam ! Combined flux in latest and established models = 3.89264 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 140 components and 3.89264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.105281Jy sigma=1.889314 ! Fit after self-cal, rms=0.103676Jy sigma=1.863083 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354754 Jy ! Component: 100 - total flux cleaned = 0.00513142 Jy ! Component: 150 - total flux cleaned = 0.00514586 Jy ! Component: 200 - total flux cleaned = 0.00561021 Jy ! Total flux subtracted in 200 components = 0.00561021 Jy ! Clean residual min=-0.023886 max=0.015948 Jy/beam ! Clean residual mean=-0.000006 rms=0.003743 Jy/beam ! Combined flux in latest and established models = 3.89825 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 152 components and 3.89825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.098778Jy sigma=1.764463 ! Fit after self-cal, rms=0.098241Jy sigma=1.756055 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.098241Jy sigma=1.756055 ! Fit after self-cal, rms=0.078065Jy sigma=1.403225 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.347 mas, bmaj=3.18 mas, bpa=-2.748 degrees ! Estimated noise=0.202041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000929409 Jy ! Component: 100 - total flux cleaned = -0.000463935 Jy ! Component: 150 - total flux cleaned = 0.000366902 Jy ! Component: 200 - total flux cleaned = 5.94491e-06 Jy ! Total flux subtracted in 200 components = 5.94491e-06 Jy ! Clean residual min=-0.018292 max=0.012215 Jy/beam ! Clean residual mean=0.000001 rms=0.002394 Jy/beam ! Combined flux in latest and established models = 3.89826 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 167 components and 3.89826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.073132Jy sigma=1.304694 ! Fit after self-cal, rms=0.072878Jy sigma=1.300948 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012443 Jy ! Component: 100 - total flux cleaned = 0.000910955 Jy ! Component: 150 - total flux cleaned = 0.000315684 Jy ! Component: 200 - total flux cleaned = 0.00032738 Jy ! Total flux subtracted in 200 components = 0.00032738 Jy ! Clean residual min=-0.016983 max=0.012173 Jy/beam ! Clean residual mean=0.000001 rms=0.002215 Jy/beam ! Combined flux in latest and established models = 3.89859 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 173 components and 3.89859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.070430Jy sigma=1.253248 ! Fit after self-cal, rms=0.070326Jy sigma=1.251585 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.070326Jy sigma=1.251585 ! Fit after self-cal, rms=0.069359Jy sigma=1.235154 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.515 mas, bmaj=4.382 mas, bpa=3.998 degrees ! Estimated noise=0.222839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000979539 Jy ! Component: 100 - total flux cleaned = -0.00130928 Jy ! Component: 150 - total flux cleaned = -0.00133106 Jy ! Component: 200 - total flux cleaned = -0.00177527 Jy ! Total flux subtracted in 200 components = -0.00177527 Jy ! Clean residual min=-0.014097 max=0.008997 Jy/beam ! Clean residual mean=0.000002 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 3.89681 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 186 components and 3.89681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.067645Jy sigma=1.200657 ! Fit after self-cal, rms=0.067550Jy sigma=1.198711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.43815e-05 Jy ! Component: 100 - total flux cleaned = -0.000196238 Jy ! Component: 150 - total flux cleaned = -0.000702278 Jy ! Component: 200 - total flux cleaned = -0.00117841 Jy ! Total flux subtracted in 200 components = -0.00117841 Jy ! Clean residual min=-0.012836 max=0.008680 Jy/beam ! Clean residual mean=0.000002 rms=0.002062 Jy/beam ! Combined flux in latest and established models = 3.89563 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 195 components and 3.89563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.066854Jy sigma=1.185105 ! Fit after self-cal, rms=0.066808Jy sigma=1.184384 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.348 mas, bmaj=3.179 mas, bpa=-2.733 degrees ! Estimated noise=0.201953 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.348 x 3.179 at -2.733 degrees (North through East) ! Clean map min=-0.017875 max=3.0366 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.066808Jy sigma=1.184384 ! Fit after self-cal, rms=0.058033Jy sigma=1.011767 ! Inverting map and beam ! Estimated beam: bmin=1.348 mas, bmaj=3.178 mas, bpa=-2.737 degrees ! Estimated noise=0.201913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00524019 Jy ! Component: 100 - total flux cleaned = -0.00575882 Jy ! Component: 150 - total flux cleaned = -0.00622349 Jy ! Component: 200 - total flux cleaned = -0.00622108 Jy ! Total flux subtracted in 200 components = -0.00622108 Jy ! Clean residual min=-0.011946 max=0.008589 Jy/beam ! Clean residual mean=0.000003 rms=0.001680 Jy/beam ! Combined flux in latest and established models = 3.88941 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 204 components and 3.88941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.055883Jy sigma=0.970146 ! Fit after self-cal, rms=0.055830Jy sigma=0.969173 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171968 Jy ! Component: 100 - total flux cleaned = 0.000164175 Jy ! Component: 150 - total flux cleaned = -2.85336e-05 Jy ! Component: 200 - total flux cleaned = 0.00015258 Jy ! Total flux subtracted in 200 components = 0.00015258 Jy ! Clean residual min=-0.011670 max=0.008251 Jy/beam ! Clean residual mean=0.000003 rms=0.001638 Jy/beam ! Combined flux in latest and established models = 3.88957 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 211 components and 3.88957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054544Jy sigma=0.944518 ! Fit after self-cal, rms=0.054521Jy sigma=0.944036 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.054521Jy sigma=0.944036 ! Fit after self-cal, rms=0.054104Jy sigma=0.937439 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9892 mas, bmaj=2.461 mas, bpa=-3.578 degrees ! Estimated noise=0.340027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.29246 Jy ! Component: 100 - total flux cleaned = 2.85366 Jy ! Component: 150 - total flux cleaned = 3.06302 Jy ! Component: 200 - total flux cleaned = 3.19261 Jy ! Total flux subtracted in 200 components = 3.19261 Jy ! Clean residual min=-0.039631 max=0.072484 Jy/beam ! Clean residual mean=0.000128 rms=0.008875 Jy/beam ! Combined flux in latest and established models = 3.19261 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 3.19261 Jy ! Inverting map and beam ! Estimated beam: bmin=1.347 mas, bmaj=3.177 mas, bpa=-2.737 degrees ! Estimated noise=0.201835 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166577 Jy ! Component: 100 - total flux cleaned = 0.282953 Jy ! Component: 150 - total flux cleaned = 0.369198 Jy ! Component: 200 - total flux cleaned = 0.433799 Jy ! Total flux subtracted in 200 components = 0.433799 Jy ! Clean residual min=-0.025750 max=0.043749 Jy/beam ! Clean residual mean=0.000020 rms=0.007639 Jy/beam ! Combined flux in latest and established models = 3.62641 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 70 components and 3.62641 Jy ! Inverting map ! Added new window around map position (-2, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0507064 Jy ! Component: 100 - total flux cleaned = 0.0894446 Jy ! Component: 150 - total flux cleaned = 0.120232 Jy ! Component: 200 - total flux cleaned = 0.145378 Jy ! Total flux subtracted in 200 components = 0.145378 Jy ! Clean residual min=-0.015815 max=0.016491 Jy/beam ! Clean residual mean=0.000010 rms=0.003497 Jy/beam ! Combined flux in latest and established models = 3.77178 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 115 components and 3.77178 Jy ! Inverting map ! Added new window around map position (7, -15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209024 Jy ! Component: 100 - total flux cleaned = 0.0381685 Jy ! Component: 150 - total flux cleaned = 0.0526707 Jy ! Component: 200 - total flux cleaned = 0.0650771 Jy ! Total flux subtracted in 200 components = 0.0650771 Jy ! Clean residual min=-0.012562 max=0.010451 Jy/beam ! Clean residual mean=0.000005 rms=0.002129 Jy/beam ! Combined flux in latest and established models = 3.83686 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 153 components and 3.83686 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.514 mas, bmaj=4.378 mas, bpa=3.963 degrees ! Estimated noise=0.222787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131165 Jy ! Component: 100 - total flux cleaned = 0.0232682 Jy ! Component: 150 - total flux cleaned = 0.031548 Jy ! Component: 200 - total flux cleaned = 0.0383691 Jy ! Total flux subtracted in 200 components = 0.0383691 Jy ! Clean residual min=-0.009914 max=0.007475 Jy/beam ! Clean residual mean=0.000004 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 3.87523 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0050368 Jy ! Component: 100 - total flux cleaned = 0.00704033 Jy ! Component: 150 - total flux cleaned = 0.00940694 Jy ! Component: 200 - total flux cleaned = 0.0112319 Jy ! Total flux subtracted in 200 components = 0.0112319 Jy ! Clean residual min=-0.008850 max=0.006068 Jy/beam ! Clean residual mean=0.000002 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 3.88646 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 239 components and 3.88646 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.347 mas, bmaj=3.177 mas, bpa=-2.737 degrees ! Estimated noise=0.201835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.89816e-05 Jy ! Component: 100 - total flux cleaned = 0.00158338 Jy ! Component: 150 - total flux cleaned = 0.00375623 Jy ! Component: 200 - total flux cleaned = 0.0052021 Jy ! Total flux subtracted in 200 components = 0.0052021 Jy ! Clean residual min=-0.008570 max=0.006770 Jy/beam ! Clean residual mean=0.000001 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 3.89167 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 260 components and 3.89167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.050342Jy sigma=0.858256 ! Fit after self-cal, rms=0.049411Jy sigma=0.838491 wmodel J0006-0623_X_map.mod ! Writing 260 model components to file: J0006-0623_X_map.mod wobs J0006-0623_X_uvs.fits ! Writing UV FITS file: J0006-0623_X_uvs.fits wwins J0006-0623_X_map.win ! wwins: Wrote 6 windows to J0006-0623_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020593 Jy ! Component: 100 - total flux cleaned = -0.00301958 Jy ! Component: 150 - total flux cleaned = -0.00313891 Jy ! Component: 200 - total flux cleaned = -0.00233739 Jy ! Component: 250 - total flux cleaned = -0.00148229 Jy ! Component: 300 - total flux cleaned = -0.000754705 Jy ! Component: 350 - total flux cleaned = 0.000206047 Jy ! Component: 400 - total flux cleaned = 0.000883027 Jy ! Component: 450 - total flux cleaned = 0.00178721 Jy ! Component: 500 - total flux cleaned = 0.00234547 Jy ! Component: 550 - total flux cleaned = 0.00281194 Jy ! Component: 600 - total flux cleaned = 0.00334218 Jy ! Component: 650 - total flux cleaned = 0.00363648 Jy ! Component: 700 - total flux cleaned = 0.00385123 Jy ! Component: 750 - total flux cleaned = 0.00413278 Jy ! Component: 800 - total flux cleaned = 0.00440779 Jy ! Component: 850 - total flux cleaned = 0.00454276 Jy ! Component: 900 - total flux cleaned = 0.00467527 Jy ! Component: 950 - total flux cleaned = 0.00474052 Jy ! Component: 1000 - total flux cleaned = 0.00467681 Jy ! Component: 1050 - total flux cleaned = 0.00467764 Jy ! Component: 1100 - total flux cleaned = 0.00473941 Jy ! Component: 1150 - total flux cleaned = 0.00467964 Jy ! Component: 1200 - total flux cleaned = 0.00473785 Jy ! Component: 1250 - total flux cleaned = 0.0045631 Jy ! Component: 1300 - total flux cleaned = 0.00456356 Jy ! Component: 1350 - total flux cleaned = 0.00450763 Jy ! Component: 1400 - total flux cleaned = 0.00434236 Jy ! Component: 1450 - total flux cleaned = 0.00439785 Jy ! Component: 1500 - total flux cleaned = 0.00418277 Jy ! Component: 1550 - total flux cleaned = 0.00407708 Jy ! Component: 1600 - total flux cleaned = 0.004025 Jy ! Component: 1650 - total flux cleaned = 0.00382045 Jy ! Component: 1700 - total flux cleaned = 0.00382071 Jy ! Component: 1750 - total flux cleaned = 0.00382003 Jy ! Component: 1800 - total flux cleaned = 0.0037696 Jy ! Component: 1850 - total flux cleaned = 0.00357464 Jy ! Component: 1900 - total flux cleaned = 0.00352693 Jy ! Component: 1950 - total flux cleaned = 0.0034321 Jy ! Component: 2000 - total flux cleaned = 0.00343183 Jy ! Component: 2050 - total flux cleaned = 0.00343188 Jy ! Component: 2100 - total flux cleaned = 0.00324766 Jy ! Component: 2150 - total flux cleaned = 0.00320264 Jy ! Component: 2200 - total flux cleaned = 0.00311309 Jy ! Component: 2250 - total flux cleaned = 0.00329086 Jy ! Component: 2300 - total flux cleaned = 0.00320218 Jy ! Component: 2350 - total flux cleaned = 0.00328936 Jy ! Component: 2400 - total flux cleaned = 0.0033322 Jy ! Component: 2450 - total flux cleaned = 0.00320473 Jy ! Component: 2500 - total flux cleaned = 0.00349974 Jy ! Component: 2550 - total flux cleaned = 0.00337472 Jy ! Component: 2600 - total flux cleaned = 0.00345784 Jy ! Component: 2650 - total flux cleaned = 0.00366177 Jy ! Component: 2700 - total flux cleaned = 0.00354018 Jy ! Component: 2750 - total flux cleaned = 0.00358086 Jy ! Component: 2800 - total flux cleaned = 0.00381922 Jy ! Component: 2850 - total flux cleaned = 0.00374008 Jy ! Component: 2900 - total flux cleaned = 0.00374005 Jy ! Component: 2950 - total flux cleaned = 0.00373997 Jy ! Component: 3000 - total flux cleaned = 0.00385471 Jy ! Component: 3050 - total flux cleaned = 0.00389244 Jy ! Component: 3100 - total flux cleaned = 0.00385466 Jy ! Component: 3150 - total flux cleaned = 0.00381686 Jy ! Component: 3200 - total flux cleaned = 0.00396422 Jy ! Component: 3250 - total flux cleaned = 0.00396425 Jy ! Component: 3300 - total flux cleaned = 0.00374703 Jy ! Component: 3350 - total flux cleaned = 0.00381904 Jy ! Component: 3400 - total flux cleaned = 0.00381869 Jy ! Component: 3450 - total flux cleaned = 0.00388929 Jy ! Component: 3500 - total flux cleaned = 0.0037841 Jy ! Component: 3550 - total flux cleaned = 0.00385359 Jy ! Component: 3600 - total flux cleaned = 0.00381933 Jy ! Component: 3650 - total flux cleaned = 0.00395636 Jy ! Component: 3700 - total flux cleaned = 0.00395607 Jy ! Component: 3750 - total flux cleaned = 0.00402314 Jy ! Component: 3800 - total flux cleaned = 0.00398985 Jy ! Component: 3850 - total flux cleaned = 0.00399006 Jy ! Component: 3900 - total flux cleaned = 0.00399049 Jy ! Component: 3950 - total flux cleaned = 0.00408808 Jy ! Component: 4000 - total flux cleaned = 0.00412031 Jy ! Component: 4050 - total flux cleaned = 0.00402412 Jy ! Total flux subtracted in 4096 components = 0.00424729 Jy ! Clean residual min=-0.001721 max=0.002025 Jy/beam ! Clean residual mean=0.000001 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 3.89591 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 493 components and 3.89591 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0006-0623_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.347 x 3.177 at -2.737 degrees (North through East) ! Clean map min=-0.0069506 max=3.0608 Jy/beam ! Writing clean map to FITS file: .//J0006-0623_X_map.fits wmodel .//J0006-0623_X_map.mod ! Writing 493 model components to file: .//J0006-0623_X_map.mod wobs .//J0006-0623_X_uvs.fits ! Writing UV FITS file: .//J0006-0623_X_uvs.fits wwins .//J0006-0623_X_map.win ! wwins: Wrote 7 windows to .//J0006-0623_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 3.06082 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000554627 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0543606 0.0543606 0.108721 0.217442 0.434885 0.869769 1.73954 3.47908 6.95816 13.9163 27.8326 55.6652 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 3.06 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 5518.7 quit ! Quitting program ! Log file .//J0006-0623_X_dfm.log closed on Sun Jan 19 23:41:14 2020