! Started logfile: .//J0006-0623_C_dfm.log on Sun Jan 19 23:41:01 2020 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs .//J0006-0623_C_uvm.fits ! Reading UV FITS file: .//J0006-0623_C_uvm.fits ! AN table 1: 54 integrations on 28 of 28 possible baselines. ! AN table 2: 30 integrations on 15 of 15 possible baselines. ! AN table 3: 32 integrations on 3 of 3 possible baselines. ! AN table 4: 81 integrations on 10 of 10 possible baselines. ! AN table 5: 68 integrations on 21 of 21 possible baselines. ! AN table 6: 51 integrations on 28 of 28 possible baselines. ! AN table 7: 52 integrations on 28 of 28 possible baselines. ! AN table 8: 17 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.609415 visibilities/baseline/integration-bin. ! Found source: J0006-0623 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 36248 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_01.dfm J0006-0623_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 405 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 405 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 405 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 158 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 5. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 6. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 7. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 8. ! A total of 52 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! A total of 129 telescope corrections were flagged in sub-array 4. ! A total of 96 telescope corrections were flagged in sub-array 5. ! A total of 278 telescope corrections were flagged in sub-array 6. ! A total of 103 telescope corrections were flagged in sub-array 7. ! A total of 2 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=2.574199Jy sigma=3248.023399 ! Fit after self-cal, rms=1.664609Jy sigma=3241.799655 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.39 mas, bmaj=7.082 mas, bpa=-6.088 degrees ! Estimated noise=0.00469755 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0248938 Jy ! Component: 100 - total flux cleaned = 0.0264901 Jy ! Total flux subtracted in 100 components = 0.0264901 Jy ! Clean residual min=-0.008729 max=0.009768 Jy/beam ! Clean residual mean=0.000007 rms=0.001705 Jy/beam ! Combined flux in latest and established models = 0.0264901 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0264901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.346849Jy sigma=77.593099 ! Fit after self-cal, rms=2.346844Jy sigma=74.593891 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=8.415 mas, bpa=-5.999 degrees ! Estimated noise=0.0022555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263779 Jy ! Component: 100 - total flux cleaned = 0.00283336 Jy ! Component: 150 - total flux cleaned = 0.00319868 Jy ! Component: 200 - total flux cleaned = 0.00337706 Jy ! Total flux subtracted in 200 components = 0.00337706 Jy ! Clean residual min=-0.006084 max=0.006294 Jy/beam ! Clean residual mean=-0.000004 rms=0.001393 Jy/beam ! Combined flux in latest and established models = 0.0298672 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 0.0298672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.343193Jy sigma=79.762939 ! Fit after self-cal, rms=2.343186Jy sigma=79.761442 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.103 x 8.415 at -5.999 degrees (North through East) ! Clean map min=-0.0060026 max=0.028131 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 4.77 FD 3.11 HN 3.39 KP 2.86 ! LA 3.34 NL 4.87 OV 5.50 PT 3.24 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.11 HN 0.09 KP 0.10 NL 0.11 ! OV 0.09 PT 0.09 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.16 FD 0.11 HN 0.12 KP 0.12 ! NL 0.14 OV 0.16 PT 0.15 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.17 FD 0.13 KP 0.16 MK 0.16 ! NL 0.09 OV 0.17 PT 0.14 SC 0.18 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.14 KP 0.15 LA 0.17 MK 0.19 ! NL 0.24 OV 0.15 PT 0.18 SC 0.20 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.11 HN 0.18 KP 0.11 LA 0.09 ! NL 0.06 PT 0.10 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 5.73 FD 2.51 HN 3.13 KP 2.66 ! LA 3.04 NL 4.70 OV 5.39 PT 2.95 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.10 HN 0.10 KP 0.10 NL 0.10 ! OV 0.09 PT 0.09 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.15 FD 0.11 HN 0.11 KP 0.11 ! NL 0.11 OV 0.16 PT 0.13 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.19 FD 0.13 KP 0.16 MK 0.16 ! NL 0.09 OV 0.19 PT 0.17 SC 0.18 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.14 KP 0.12 LA 0.12 MK 0.19 ! NL 0.20 OV 0.14 PT 0.14 SC 0.22 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.11 HN 0.18 KP 0.12 LA 0.09 ! NL 0.07 PT 0.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.49 FD 1.99 HN 2.07 KP 1.64 ! LA 1.69 NL 2.32 OV 2.23 PT 1.78 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.10 HN 0.10 KP 0.10 NL 0.10 ! OV 0.09 PT 0.09 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.12 FD 0.11 HN 0.09 KP 0.10 ! NL 0.10 OV 0.10 PT 0.11 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.12 FD 0.11 KP 0.11 MK 0.18 ! NL 0.09 OV 0.12 PT 0.11 SC 0.18 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.12 KP 0.10 LA 0.10 MK 0.19 ! NL 0.11 OV 0.11 PT 0.11 SC 0.18 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.11 HN 0.13 KP 0.12 LA 0.09 ! NL 0.07 PT 0.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.96 FD 1.74 HN 1.84 KP 1.44 ! LA 1.35 NL 1.58 OV 1.78 PT 1.55 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.10 HN 0.10 KP 0.10 NL 0.10 ! OV 0.09 PT 0.09 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.12 FD 0.11 NL 0.09 OV 0.09 ! PT 0.10 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 0.10 HN 0.10 KP 0.09 ! NL 0.09 OV 0.11 PT 0.08 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.11 FD 0.10 KP 0.09 MK 0.17 ! NL 0.09 OV 0.10 PT 0.10 SC 0.18 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.12 KP 0.09 LA 0.09 MK 0.19 ! NL 0.10 OV 0.10 PT 0.09 SC 0.20 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.11 HN 0.12 KP 0.11 LA 0.09 ! NL 0.07 PT 0.09 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 4.18 FD 1.82 HN 1.80 KP 1.49 ! LA 1.27 NL 1.38 OV 1.76 PT 1.33 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.11 HN 0.10 KP 0.10 NL 0.10 ! OV 0.09 PT 0.09 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.12 FD 0.10 NL 0.08 OV 0.10 ! PT 0.10 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.13 FD 0.10 HN 0.10 KP 0.09 ! NL 0.09 OV 0.10 PT 0.09 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.16 FD 0.10 KP 0.10 MK 0.17 ! NL 0.09 OV 0.11 PT 0.10 SC 0.20 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.13 KP 0.09 LA 0.09 MK 0.20 ! NL 0.10 OV 0.11 PT 0.09 SC 0.20 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.11 HN 0.12 KP 0.12 LA 0.09 ! NL 0.07 PT 0.10 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 2.26 FD 1.50 HN 2.02 KP 1.44 ! LA 1.33 NL 1.42 OV 1.81 PT 1.47 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.09 HN 0.11 KP 0.09 NL 0.10 ! OV 0.10 PT 0.08 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.12 FD 0.11 NL 0.08 OV 0.10 ! PT 0.10 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.12 FD 0.10 HN 0.10 KP 0.09 ! NL 0.09 OV 0.10 PT 0.09 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.11 FD 0.11 KP 0.10 MK 0.18 ! NL 0.08 OV 0.10 PT 0.10 SC 0.19 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.12 KP 0.09 LA 0.09 MK 0.19 ! NL 0.10 OV 0.11 PT 0.09 SC 0.20 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.11 HN 0.13 KP 0.12 LA 0.09 ! NL 0.07 PT 0.10 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 2.14 FD 1.68 HN 2.06 KP 1.37 ! LA 1.40 NL 1.46 OV 1.71 PT 1.45 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.09 HN 0.11 KP 0.09 NL 0.10 ! OV 0.10 PT 0.08 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.12 FD 0.11 NL 0.08 OV 0.09 ! PT 0.10 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.12 FD 0.10 HN 0.10 KP 0.09 ! NL 0.09 OV 0.10 PT 0.09 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.11 FD 0.11 KP 0.10 MK 0.17 ! NL 0.08 OV 0.10 PT 0.10 SC 0.19 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.12 KP 0.09 LA 0.09 MK 0.19 ! NL 0.10 OV 0.11 PT 0.09 SC 0.20 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.11 HN 0.13 KP 0.12 LA 0.09 ! NL 0.07 PT 0.10 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.92 FD 1.78 HN 1.92 KP 1.51 ! LA 1.34 NL 1.53 OV 1.76 PT 1.42 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.09 HN 0.11 KP 0.09 NL 0.10 ! OV 0.10 PT 0.08 ! ! A total of 93 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* NL 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.12 FD 0.11 NL 0.08 OV 0.09 ! PT 0.10 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.12 FD 0.10 HN 0.10 KP 0.09 ! NL 0.08 OV 0.09 PT 0.09 ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.11 FD 0.11 KP 0.10 MK 0.17 ! NL 0.08 OV 0.10 PT 0.10 SC 0.19 ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 0.12 KP 0.09 LA 0.09 MK 0.19 ! NL 0.10 OV 0.10 PT 0.09 SC 0.20 ! ! Telescope amplitude corrections in sub-array 8: ! FD 0.11 HN 0.12 KP 0.12 LA 0.09 ! NL 0.07 PT 0.10 ! ! ! Fit before self-cal, rms=2.343186Jy sigma=79.761442 ! Fit after self-cal, rms=0.011396Jy sigma=12.042864 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.69 mas, bmaj=6.595 mas, bpa=-5.716 degrees ! Estimated noise=0.00228894 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.8, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276632 Jy ! Component: 100 - total flux cleaned = 0.00321956 Jy ! Component: 150 - total flux cleaned = 0.00322521 Jy ! Component: 200 - total flux cleaned = 0.00318729 Jy ! Total flux subtracted in 200 components = 0.00318729 Jy ! Clean residual min=-0.000955 max=0.001063 Jy/beam ! Clean residual mean=-0.000002 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.0330545 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 34 components and 0.0330545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.010378Jy sigma=9.753129 ! Fit after self-cal, rms=0.010316Jy sigma=9.619213 ! Inverting map ! Added new window around map position (-1.5, 13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433278 Jy ! Component: 100 - total flux cleaned = 0.000473771 Jy ! Component: 150 - total flux cleaned = 0.000473508 Jy ! Component: 200 - total flux cleaned = 0.000441021 Jy ! Total flux subtracted in 200 components = 0.000441021 Jy ! Clean residual min=-0.000800 max=0.000837 Jy/beam ! Clean residual mean=-0.000002 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.0334955 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 54 components and 0.0334955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.009934Jy sigma=8.931151 ! Fit after self-cal, rms=0.009913Jy sigma=8.902940 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.009913Jy sigma=8.902940 ! Fit after self-cal, rms=0.008365Jy sigma=7.664609 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=6.486 mas, bpa=-5.494 degrees ! Estimated noise=0.00226793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115476 Jy ! Component: 100 - total flux cleaned = 0.0014379 Jy ! Component: 150 - total flux cleaned = 0.00146326 Jy ! Component: 200 - total flux cleaned = 0.00146295 Jy ! Total flux subtracted in 200 components = 0.00146295 Jy ! Clean residual min=-0.000526 max=0.000642 Jy/beam ! Clean residual mean=-0.000001 rms=0.000116 Jy/beam ! Combined flux in latest and established models = 0.0349584 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 73 components and 0.0349584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.008048Jy sigma=7.000696 ! Fit after self-cal, rms=0.008030Jy sigma=6.968787 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.7, 17.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000242961 Jy ! Component: 100 - total flux cleaned = 0.000264297 Jy ! Component: 150 - total flux cleaned = 0.00030629 Jy ! Component: 200 - total flux cleaned = 0.00032549 Jy ! Total flux subtracted in 200 components = 0.00032549 Jy ! Clean residual min=-0.000446 max=0.000531 Jy/beam ! Clean residual mean=-0.000001 rms=0.000108 Jy/beam ! Combined flux in latest and established models = 0.0352839 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 0.0352839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.007847Jy sigma=6.666882 ! Fit after self-cal, rms=0.007839Jy sigma=6.654822 ! Inverting map ! Added new window around map position (-2.1, -17.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000192995 Jy ! Component: 100 - total flux cleaned = 0.000231526 Jy ! Component: 150 - total flux cleaned = 0.000266782 Jy ! Component: 200 - total flux cleaned = 0.000266662 Jy ! Total flux subtracted in 200 components = 0.000266662 Jy ! Clean residual min=-0.000421 max=0.000481 Jy/beam ! Clean residual mean=-0.000001 rms=0.000102 Jy/beam ! Combined flux in latest and established models = 0.0355506 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 109 components and 0.0355506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.007698Jy sigma=6.450841 ! Fit after self-cal, rms=0.007694Jy sigma=6.445220 ! Inverting map ! Added new window around map position (-5.1, -52.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.30754e-05 Jy ! Component: 100 - total flux cleaned = 8.91772e-05 Jy ! Component: 150 - total flux cleaned = 0.000152161 Jy ! Component: 200 - total flux cleaned = 0.000197334 Jy ! Total flux subtracted in 200 components = 0.000197334 Jy ! Clean residual min=-0.000396 max=0.000438 Jy/beam ! Clean residual mean=-0.000001 rms=0.000094 Jy/beam ! Combined flux in latest and established models = 0.0357479 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 128 components and 0.0357479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.007581Jy sigma=6.275485 ! Fit after self-cal, rms=0.007578Jy sigma=6.270348 ! Inverting map ! Added new window around map position (4.8, 41.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333845 Jy ! Component: 100 - total flux cleaned = 0.00046953 Jy ! Component: 150 - total flux cleaned = 0.00058509 Jy ! Component: 200 - total flux cleaned = 0.00064114 Jy ! Total flux subtracted in 200 components = 0.00064114 Jy ! Clean residual min=-0.000355 max=0.000369 Jy/beam ! Clean residual mean=-0.000001 rms=0.000085 Jy/beam ! Combined flux in latest and established models = 0.0363891 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 153 components and 0.0363891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.007478Jy sigma=6.130641 ! Fit after self-cal, rms=0.007477Jy sigma=6.125160 ! Inverting map ! Added new window around map position (-9, -20.1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275489 Jy ! Component: 100 - total flux cleaned = 0.000424103 Jy ! Component: 150 - total flux cleaned = 0.000462993 Jy ! Component: 200 - total flux cleaned = 0.000552202 Jy ! Total flux subtracted in 200 components = 0.000552202 Jy ! Clean residual min=-0.000329 max=0.000343 Jy/beam ! Clean residual mean=-0.000001 rms=0.000080 Jy/beam ! Combined flux in latest and established models = 0.0369413 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 168 components and 0.0369413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.007394Jy sigma=6.013979 ! Fit after self-cal, rms=0.007393Jy sigma=6.011014 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.007393Jy sigma=6.011014 ! Fit after self-cal, rms=0.004474Jy sigma=3.835348 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.632 mas, bmaj=6.421 mas, bpa=-5.472 degrees ! Estimated noise=0.00226155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000346324 Jy ! Component: 100 - total flux cleaned = 0.000392638 Jy ! Component: 150 - total flux cleaned = 0.000379094 Jy ! Component: 200 - total flux cleaned = 0.0003536 Jy ! Total flux subtracted in 200 components = 0.0003536 Jy ! Clean residual min=-0.000264 max=0.000235 Jy/beam ! Clean residual mean=-0.000000 rms=0.000057 Jy/beam ! Combined flux in latest and established models = 0.0372949 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 182 components and 0.0372949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.004309Jy sigma=3.599796 ! Fit after self-cal, rms=0.004318Jy sigma=3.598514 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3225e-05 Jy ! Component: 100 - total flux cleaned = 2.00529e-06 Jy ! Component: 150 - total flux cleaned = 1.35978e-05 Jy ! Component: 200 - total flux cleaned = 3.51103e-05 Jy ! Total flux subtracted in 200 components = 3.51103e-05 Jy ! Clean residual min=-0.000229 max=0.000219 Jy/beam ! Clean residual mean=-0.000000 rms=0.000054 Jy/beam ! Combined flux in latest and established models = 0.03733 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 197 components and 0.03733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.004218Jy sigma=3.470913 ! Fit after self-cal, rms=0.004218Jy sigma=3.469676 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.004218Jy sigma=3.469676 ! Fit after self-cal, rms=0.004052Jy sigma=3.405007 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.418 mas, bmaj=8.247 mas, bpa=-2.577 degrees ! Estimated noise=0.0023843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.71214e-05 Jy ! Component: 100 - total flux cleaned = -0.000158263 Jy ! Component: 150 - total flux cleaned = -0.000179026 Jy ! Component: 200 - total flux cleaned = -0.000186124 Jy ! Total flux subtracted in 200 components = -0.000186124 Jy ! Clean residual min=-0.000124 max=0.000152 Jy/beam ! Clean residual mean=-0.000000 rms=0.000036 Jy/beam ! Combined flux in latest and established models = 0.0371439 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 223 components and 0.0371439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.004042Jy sigma=3.356148 ! Fit after self-cal, rms=0.004041Jy sigma=3.354633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, -33). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.99821e-05 Jy ! Component: 100 - total flux cleaned = 9.30713e-05 Jy ! Component: 150 - total flux cleaned = 0.00014681 Jy ! Component: 200 - total flux cleaned = 0.000168211 Jy ! Total flux subtracted in 200 components = 0.000168211 Jy ! Clean residual min=-0.000130 max=0.000109 Jy/beam ! Clean residual mean=-0.000000 rms=0.000034 Jy/beam ! Combined flux in latest and established models = 0.0373121 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 257 components and 0.0373121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.004029Jy sigma=3.309764 ! Fit after self-cal, rms=0.004030Jy sigma=3.308404 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=6.384 mas, bpa=-5.409 degrees ! Estimated noise=0.00226705 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.618 x 6.384 at -5.409 degrees (North through East) ! Clean map min=-0.00050023 max=0.027801 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.851 mas, bmaj=4.859 mas, bpa=-5.241 degrees ! Estimated noise=0.00444538 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243 Jy ! Component: 100 - total flux cleaned = 0.0312585 Jy ! Component: 150 - total flux cleaned = 0.0337262 Jy ! Component: 200 - total flux cleaned = 0.034101 Jy ! Total flux subtracted in 200 components = 0.034101 Jy ! Clean residual min=-0.001895 max=0.001960 Jy/beam ! Clean residual mean=0.000001 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.034101 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.034101 Jy ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=6.384 mas, bpa=-5.409 degrees ! Estimated noise=0.00226705 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000829485 Jy ! Component: 100 - total flux cleaned = 0.000772411 Jy ! Component: 150 - total flux cleaned = 0.000851922 Jy ! Component: 200 - total flux cleaned = 0.000997697 Jy ! Total flux subtracted in 200 components = 0.000997697 Jy ! Clean residual min=-0.000652 max=0.000827 Jy/beam ! Clean residual mean=0.000000 rms=0.000108 Jy/beam ! Combined flux in latest and established models = 0.0350987 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.0350987 Jy ! Inverting map ! Added new window around map position (3.3, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319205 Jy ! Component: 100 - total flux cleaned = 0.000412988 Jy ! Component: 150 - total flux cleaned = 0.000442316 Jy ! Component: 200 - total flux cleaned = 0.000498446 Jy ! Total flux subtracted in 200 components = 0.000498446 Jy ! Clean residual min=-0.000560 max=0.000515 Jy/beam ! Clean residual mean=-0.000000 rms=0.000095 Jy/beam ! Combined flux in latest and established models = 0.0355972 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 49 components and 0.0355972 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.418 mas, bmaj=8.247 mas, bpa=-2.577 degrees ! Estimated noise=0.0023843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300209 Jy ! Component: 100 - total flux cleaned = 0.000395429 Jy ! Component: 150 - total flux cleaned = 0.000474973 Jy ! Component: 200 - total flux cleaned = 0.000544259 Jy ! Total flux subtracted in 200 components = 0.000544259 Jy ! Clean residual min=-0.000241 max=0.000294 Jy/beam ! Clean residual mean=-0.000000 rms=0.000062 Jy/beam ! Combined flux in latest and established models = 0.0361414 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.3, 34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.46046e-05 Jy ! Component: 100 - total flux cleaned = 0.00016592 Jy ! Component: 150 - total flux cleaned = 0.000184535 Jy ! Component: 200 - total flux cleaned = 0.000236986 Jy ! Total flux subtracted in 200 components = 0.000236986 Jy ! Clean residual min=-0.000177 max=0.000179 Jy/beam ! Clean residual mean=-0.000000 rms=0.000050 Jy/beam ! Combined flux in latest and established models = 0.0363784 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 124 components and 0.0363784 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=6.384 mas, bpa=-5.409 degrees ! Estimated noise=0.00226705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212513 Jy ! Component: 100 - total flux cleaned = 0.000188102 Jy ! Component: 150 - total flux cleaned = 0.00018811 Jy ! Component: 200 - total flux cleaned = 0.00021055 Jy ! Total flux subtracted in 200 components = 0.00021055 Jy ! Clean residual min=-0.000358 max=0.000363 Jy/beam ! Clean residual mean=-0.000000 rms=0.000071 Jy/beam ! Combined flux in latest and established models = 0.036589 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 133 components and 0.036589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.005106Jy sigma=4.356828 ! Fit after self-cal, rms=0.005075Jy sigma=4.288811 wmodel J0006-0623_C_map.mod ! Writing 133 model components to file: J0006-0623_C_map.mod wobs J0006-0623_C_uvs.fits ! Writing UV FITS file: J0006-0623_C_uvs.fits wwins J0006-0623_C_map.win ! wwins: Wrote 11 windows to J0006-0623_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -3.02489e-05 Jy ! Component: 100 - total flux cleaned = -3.72706e-05 Jy ! Component: 150 - total flux cleaned = -4.41525e-05 Jy ! Component: 200 - total flux cleaned = -2.38585e-05 Jy ! Component: 250 - total flux cleaned = -1.05903e-05 Jy ! Component: 300 - total flux cleaned = 2.42698e-06 Jy ! Component: 350 - total flux cleaned = 8.81786e-06 Jy ! Component: 400 - total flux cleaned = 2.43928e-06 Jy ! Component: 450 - total flux cleaned = 8.6193e-06 Jy ! Component: 500 - total flux cleaned = 8.53776e-06 Jy ! Component: 550 - total flux cleaned = 2.05759e-05 Jy ! Component: 600 - total flux cleaned = 2.05011e-05 Jy ! Component: 650 - total flux cleaned = 3.23639e-05 Jy ! Component: 700 - total flux cleaned = 3.82367e-05 Jy ! Component: 750 - total flux cleaned = 4.40696e-05 Jy ! Component: 800 - total flux cleaned = 4.41066e-05 Jy ! Component: 850 - total flux cleaned = 4.97138e-05 Jy ! Component: 900 - total flux cleaned = 4.9627e-05 Jy ! Component: 950 - total flux cleaned = 4.96168e-05 Jy ! Component: 1000 - total flux cleaned = 5.50913e-05 Jy ! Component: 1050 - total flux cleaned = 6.58338e-05 Jy ! Component: 1100 - total flux cleaned = 7.63725e-05 Jy ! Component: 1150 - total flux cleaned = 8.67784e-05 Jy ! Component: 1200 - total flux cleaned = 9.19529e-05 Jy ! Component: 1250 - total flux cleaned = 9.70838e-05 Jy ! Component: 1300 - total flux cleaned = 0.000112306 Jy ! Component: 1350 - total flux cleaned = 0.000127272 Jy ! Component: 1400 - total flux cleaned = 0.000127263 Jy ! Component: 1450 - total flux cleaned = 0.000137081 Jy ! Component: 1500 - total flux cleaned = 0.00015162 Jy ! Component: 1550 - total flux cleaned = 0.000146798 Jy ! Component: 1600 - total flux cleaned = 0.000156342 Jy ! Component: 1650 - total flux cleaned = 0.000170492 Jy ! Component: 1700 - total flux cleaned = 0.000170514 Jy ! Component: 1750 - total flux cleaned = 0.000184508 Jy ! Component: 1800 - total flux cleaned = 0.000193718 Jy ! Component: 1850 - total flux cleaned = 0.000193688 Jy ! Component: 1900 - total flux cleaned = 0.00020727 Jy ! Component: 1950 - total flux cleaned = 0.000211774 Jy ! Component: 2000 - total flux cleaned = 0.000216202 Jy ! Component: 2050 - total flux cleaned = 0.000220617 Jy ! Component: 2100 - total flux cleaned = 0.000229344 Jy ! Component: 2150 - total flux cleaned = 0.000229337 Jy ! Component: 2200 - total flux cleaned = 0.000233657 Jy ! Component: 2250 - total flux cleaned = 0.000242271 Jy ! Component: 2300 - total flux cleaned = 0.000250721 Jy ! Component: 2350 - total flux cleaned = 0.000250698 Jy ! Component: 2400 - total flux cleaned = 0.000259057 Jy ! Component: 2450 - total flux cleaned = 0.000267336 Jy ! Component: 2500 - total flux cleaned = 0.000271471 Jy ! Component: 2550 - total flux cleaned = 0.000275548 Jy ! Component: 2600 - total flux cleaned = 0.000283713 Jy ! Component: 2650 - total flux cleaned = 0.000287726 Jy ! Component: 2700 - total flux cleaned = 0.000303736 Jy ! Component: 2750 - total flux cleaned = 0.000307691 Jy ! Component: 2800 - total flux cleaned = 0.000311598 Jy ! Component: 2850 - total flux cleaned = 0.000323394 Jy ! Component: 2900 - total flux cleaned = 0.000331165 Jy ! Component: 2950 - total flux cleaned = 0.000335029 Jy ! Component: 3000 - total flux cleaned = 0.000342685 Jy ! Component: 3050 - total flux cleaned = 0.000342694 Jy ! Component: 3100 - total flux cleaned = 0.000354047 Jy ! Component: 3150 - total flux cleaned = 0.00036909 Jy ! Component: 3200 - total flux cleaned = 0.000376578 Jy ! Component: 3250 - total flux cleaned = 0.000376598 Jy ! Component: 3300 - total flux cleaned = 0.000387672 Jy ! Component: 3350 - total flux cleaned = 0.000398678 Jy ! Component: 3400 - total flux cleaned = 0.000409608 Jy ! Component: 3450 - total flux cleaned = 0.000409576 Jy ! Component: 3500 - total flux cleaned = 0.000420349 Jy ! Component: 3550 - total flux cleaned = 0.000431056 Jy ! Component: 3600 - total flux cleaned = 0.000438126 Jy ! Component: 3650 - total flux cleaned = 0.00044162 Jy ! Component: 3700 - total flux cleaned = 0.00044162 Jy ! Component: 3750 - total flux cleaned = 0.000458983 Jy ! Component: 3800 - total flux cleaned = 0.000462381 Jy ! Component: 3850 - total flux cleaned = 0.000465801 Jy ! Component: 3900 - total flux cleaned = 0.000479407 Jy ! Component: 3950 - total flux cleaned = 0.000482746 Jy ! Component: 4000 - total flux cleaned = 0.000486124 Jy ! Component: 4050 - total flux cleaned = 0.000496096 Jy ! Total flux subtracted in 4096 components = 0.000499402 Jy ! Clean residual min=-0.000165 max=0.000165 Jy/beam ! Clean residual mean=-0.000000 rms=0.000046 Jy/beam ! Combined flux in latest and established models = 0.0370884 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 241 components and 0.0370884 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0006-0623_C_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.618 x 6.384 at -5.409 degrees (North through East) ! Clean map min=-0.00038456 max=0.028337 Jy/beam ! Writing clean map to FITS file: .//J0006-0623_C_map.fits wmodel .//J0006-0623_C_map.mod ! Writing 241 model components to file: .//J0006-0623_C_map.mod wobs .//J0006-0623_C_uvs.fits ! Writing UV FITS file: .//J0006-0623_C_uvs.fits wwins .//J0006-0623_C_map.win ! wwins: Wrote 12 windows to .//J0006-0623_C_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0283374 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 4.5521e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.481918 0.481918 0.963835 1.92767 3.85534 7.71068 15.4214 30.8427 61.6855 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.028 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 622.512 quit ! Quitting program ! Log file .//J0006-0623_C_dfm.log closed on Sun Jan 19 23:41:07 2020