! Started logfile: /image_prod/ug002_uva//J2358-1020_X_g_dfm.log on Thu Mar 5 06:34:21 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2358-1020_X_g_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2358-1020_X_g_uva.fits ! AN table 1: 18 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.736111 visibilities/baseline/integration-bin. ! Found source: J2358-1020 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 4452 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2358-1020_X_g] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.422331Jy sigma=7.689393 ! Fit after self-cal, rms=0.239531Jy sigma=1.406662 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5978 mas, bmaj=1.576 mas, bpa=3.309 degrees ! Estimated noise=2.54966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.676786 Jy ! Component: 100 - total flux cleaned = 0.864904 Jy ! Total flux subtracted in 100 components = 0.864904 Jy ! Clean residual min=-0.059094 max=0.083851 Jy/beam ! Clean residual mean=0.000095 rms=0.011399 Jy/beam ! Combined flux in latest and established models = 0.864904 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.864904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.234146Jy sigma=1.237437 ! Fit after self-cal, rms=0.234054Jy sigma=1.237145 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0983342 Jy ! Component: 100 - total flux cleaned = 0.161434 Jy ! Total flux subtracted in 100 components = 0.161434 Jy ! Clean residual min=-0.053906 max=0.055886 Jy/beam ! Clean residual mean=0.000039 rms=0.008901 Jy/beam ! Combined flux in latest and established models = 1.02634 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 1.02634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.171207Jy sigma=0.929217 ! Fit after self-cal, rms=0.171108Jy sigma=0.928824 ! Inverting map ! Added new window around map position (2.6, 18.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.045427 Jy ! Component: 100 - total flux cleaned = 0.0636064 Jy ! Total flux subtracted in 100 components = 0.0636064 Jy ! Clean residual min=-0.047585 max=0.047313 Jy/beam ! Clean residual mean=0.000024 rms=0.007964 Jy/beam ! Combined flux in latest and established models = 1.08994 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 1.08994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.155589Jy sigma=0.845030 ! Fit after self-cal, rms=0.154397Jy sigma=0.839060 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7202 mas, bmaj=1.788 mas, bpa=3.65 degrees ! Estimated noise=1.98655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.8, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232351 Jy ! Component: 100 - total flux cleaned = 0.0327381 Jy ! Component: 150 - total flux cleaned = 0.0405363 Jy ! Component: 200 - total flux cleaned = 0.0447138 Jy ! Total flux subtracted in 200 components = 0.0447138 Jy ! Clean residual min=-0.036939 max=0.048216 Jy/beam ! Clean residual mean=0.000016 rms=0.006877 Jy/beam ! Combined flux in latest and established models = 1.13466 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 42 components and 1.13466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.135872Jy sigma=0.735617 ! Fit after self-cal, rms=0.134536Jy sigma=0.726517 ! Inverting map ! Added new window around map position (-1.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236985 Jy ! Component: 100 - total flux cleaned = 0.0265639 Jy ! Component: 150 - total flux cleaned = 0.0321878 Jy ! Component: 200 - total flux cleaned = 0.036412 Jy ! Total flux subtracted in 200 components = 0.036412 Jy ! Clean residual min=-0.030536 max=0.027233 Jy/beam ! Clean residual mean=0.000001 rms=0.005874 Jy/beam ! Combined flux in latest and established models = 1.17107 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 59 components and 1.17107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121050Jy sigma=0.643830 ! Fit after self-cal, rms=0.120590Jy sigma=0.642061 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7202 x 1.788 at 3.65 degrees (North through East) ! Clean map min=-0.027135 max=0.91012 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.91 LA 1.04 MK 1.00 ! NL 1.06 OV 0.94 PT 0.93 SC 1.01 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.91 LA 1.04 MK 0.99 ! NL 1.07 OV 0.96 PT 0.94 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.92 LA 1.04 MK 1.00 ! NL 1.07 OV 0.95 PT 0.95 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.92 LA 1.05 MK 1.01 ! NL 1.06 OV 0.96 PT 0.94 SC 1.01 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.93 LA 1.05 MK 1.01 ! NL 1.07 OV 0.94 PT 0.95 SC 1.02 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.92 LA 1.05 MK 1.02 ! NL 1.07 OV 0.96 PT 0.97 SC 1.00 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.96 LA 1.04 MK 1.07 ! NL 1.07 OV 0.96 PT 0.93 SC 1.01 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.96 LA 1.04 MK 1.07 ! NL 1.08 OV 0.94 PT 0.95 SC 1.03 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.96 LA 1.04 MK 1.08 ! NL 1.07 OV 0.94 PT 0.96 SC 1.00 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.92 LA 1.04 MK 1.06 ! NL 1.09 OV 0.96 PT 0.96 SC 1.04 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.97 LA 1.06 MK 1.05 ! NL 1.09 OV 0.95 PT 0.97 SC 1.01 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.94 LA 1.03 MK 1.09 ! NL 1.09 OV 0.95 PT 0.94 SC 1.03 ! ! ! Fit before self-cal, rms=0.120590Jy sigma=0.642061 ! Fit after self-cal, rms=0.099309Jy sigma=0.534926 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7244 mas, bmaj=1.803 mas, bpa=3.667 degrees ! Estimated noise=1.993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185411 Jy ! Component: 100 - total flux cleaned = -0.00399628 Jy ! Component: 150 - total flux cleaned = -0.00737698 Jy ! Component: 200 - total flux cleaned = -0.00862881 Jy ! Total flux subtracted in 200 components = -0.00862881 Jy ! Clean residual min=-0.018224 max=0.018836 Jy/beam ! Clean residual mean=-0.000018 rms=0.003864 Jy/beam ! Combined flux in latest and established models = 1.16244 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 81 components and 1.16244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092919Jy sigma=0.500021 ! Fit after self-cal, rms=0.092735Jy sigma=0.498879 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092735Jy sigma=0.498879 ! Fit after self-cal, rms=0.078422Jy sigma=0.410091 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7267 mas, bmaj=1.82 mas, bpa=3.173 degrees ! Estimated noise=2.01102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00223605 Jy ! Component: 100 - total flux cleaned = -0.00484082 Jy ! Component: 150 - total flux cleaned = -0.00758962 Jy ! Component: 200 - total flux cleaned = -0.0102776 Jy ! Total flux subtracted in 200 components = -0.0102776 Jy ! Clean residual min=-0.012114 max=0.010492 Jy/beam ! Clean residual mean=-0.000013 rms=0.002530 Jy/beam ! Combined flux in latest and established models = 1.15216 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 101 components and 1.15216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075732Jy sigma=0.393454 ! Fit after self-cal, rms=0.075644Jy sigma=0.393139 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00314425 Jy ! Component: 100 - total flux cleaned = -0.00406607 Jy ! Component: 150 - total flux cleaned = -0.0047089 Jy ! Component: 200 - total flux cleaned = -0.00550575 Jy ! Total flux subtracted in 200 components = -0.00550575 Jy ! Clean residual min=-0.011502 max=0.010363 Jy/beam ! Clean residual mean=-0.000012 rms=0.002431 Jy/beam ! Combined flux in latest and established models = 1.14666 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 118 components and 1.14666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074595Jy sigma=0.386653 ! Fit after self-cal, rms=0.074555Jy sigma=0.386498 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074555Jy sigma=0.386498 ! Fit after self-cal, rms=0.072218Jy sigma=0.370960 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7264 mas, bmaj=1.825 mas, bpa=3.085 degrees ! Estimated noise=2.0177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269957 Jy ! Component: 100 - total flux cleaned = -0.00217184 Jy ! Component: 150 - total flux cleaned = -0.00353954 Jy ! Component: 200 - total flux cleaned = -0.00523666 Jy ! Total flux subtracted in 200 components = -0.00523666 Jy ! Clean residual min=-0.009521 max=0.008540 Jy/beam ! Clean residual mean=-0.000010 rms=0.001936 Jy/beam ! Combined flux in latest and established models = 1.14142 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 127 components and 1.14142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069987Jy sigma=0.357074 ! Fit after self-cal, rms=0.069930Jy sigma=0.356840 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00172217 Jy ! Component: 100 - total flux cleaned = -0.00268756 Jy ! Component: 150 - total flux cleaned = -0.00320285 Jy ! Component: 200 - total flux cleaned = -0.00384747 Jy ! Total flux subtracted in 200 components = -0.00384747 Jy ! Clean residual min=-0.008844 max=0.008170 Jy/beam ! Clean residual mean=-0.000009 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 1.13757 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 131 components and 1.13757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069081Jy sigma=0.351791 ! Fit after self-cal, rms=0.069041Jy sigma=0.351668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069041Jy sigma=0.351668 ! Fit after self-cal, rms=0.068451Jy sigma=0.347530 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.74 mas, bmaj=3.613 mas, bpa=7.246 degrees ! Estimated noise=2.99932 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00516419 Jy ! Component: 100 - total flux cleaned = -0.00658992 Jy ! Component: 150 - total flux cleaned = -0.00725692 Jy ! Component: 200 - total flux cleaned = -0.00755059 Jy ! Total flux subtracted in 200 components = -0.00755059 Jy ! Clean residual min=-0.009992 max=0.009288 Jy/beam ! Clean residual mean=-0.000026 rms=0.002522 Jy/beam ! Combined flux in latest and established models = 1.13002 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 144 components and 1.13002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068068Jy sigma=0.345718 ! Fit after self-cal, rms=0.068068Jy sigma=0.345676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031419 Jy ! Component: 100 - total flux cleaned = 0.000227677 Jy ! Component: 150 - total flux cleaned = 6.42774e-05 Jy ! Component: 200 - total flux cleaned = -0.000160511 Jy ! Total flux subtracted in 200 components = -0.000160511 Jy ! Clean residual min=-0.009633 max=0.009432 Jy/beam ! Clean residual mean=-0.000028 rms=0.002492 Jy/beam ! Combined flux in latest and established models = 1.12986 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 151 components and 1.12986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067956Jy sigma=0.345034 ! Fit after self-cal, rms=0.067949Jy sigma=0.344995 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.726 mas, bmaj=1.827 mas, bpa=3.089 degrees ! Estimated noise=2.01875 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.726 x 1.827 at 3.089 degrees (North through East) ! Clean map min=-0.012533 max=0.90859 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067949Jy sigma=0.344995 ! Fit after self-cal, rms=0.063917Jy sigma=0.319758 ! Inverting map and beam ! Estimated beam: bmin=0.7258 mas, bmaj=1.827 mas, bpa=3.099 degrees ! Estimated noise=2.01794 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0028688 Jy ! Component: 100 - total flux cleaned = -0.00307808 Jy ! Component: 150 - total flux cleaned = -0.00308117 Jy ! Component: 200 - total flux cleaned = -0.00340553 Jy ! Total flux subtracted in 200 components = -0.00340553 Jy ! Clean residual min=-0.007486 max=0.006758 Jy/beam ! Clean residual mean=-0.000004 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 1.12646 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 152 components and 1.12646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062815Jy sigma=0.312881 ! Fit after self-cal, rms=0.062754Jy sigma=0.312650 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138459 Jy ! Component: 100 - total flux cleaned = -0.00152049 Jy ! Component: 150 - total flux cleaned = -0.00164669 Jy ! Component: 200 - total flux cleaned = -0.00174858 Jy ! Total flux subtracted in 200 components = -0.00174858 Jy ! Clean residual min=-0.007277 max=0.006611 Jy/beam ! Clean residual mean=-0.000004 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 1.12471 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 159 components and 1.12471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062316Jy sigma=0.310013 ! Fit after self-cal, rms=0.062287Jy sigma=0.309927 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062287Jy sigma=0.309927 ! Fit after self-cal, rms=0.062034Jy sigma=0.307878 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6013 mas, bmaj=1.609 mas, bpa=2.942 degrees ! Estimated noise=2.59634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.686065 Jy ! Component: 100 - total flux cleaned = 0.868008 Jy ! Component: 150 - total flux cleaned = 0.959047 Jy ! Component: 200 - total flux cleaned = 1.01122 Jy ! Total flux subtracted in 200 components = 1.01122 Jy ! Clean residual min=-0.023303 max=0.027973 Jy/beam ! Clean residual mean=0.000042 rms=0.004073 Jy/beam ! Combined flux in latest and established models = 1.01122 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.01122 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7255 mas, bmaj=1.828 mas, bpa=3.083 degrees ! Estimated noise=2.01783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440888 Jy ! Component: 100 - total flux cleaned = 0.0711282 Jy ! Component: 150 - total flux cleaned = 0.0869512 Jy ! Component: 200 - total flux cleaned = 0.0971515 Jy ! Total flux subtracted in 200 components = 0.0971515 Jy ! Clean residual min=-0.010037 max=0.011516 Jy/beam ! Clean residual mean=0.000012 rms=0.002302 Jy/beam ! Combined flux in latest and established models = 1.10838 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 41 components and 1.10838 Jy ! Inverting map ! Added new window around map position (-10.4, -48.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0093928 Jy ! Component: 100 - total flux cleaned = 0.0157942 Jy ! Component: 150 - total flux cleaned = 0.0197293 Jy ! Component: 200 - total flux cleaned = 0.021484 Jy ! Total flux subtracted in 200 components = 0.021484 Jy ! Clean residual min=-0.008686 max=0.009065 Jy/beam ! Clean residual mean=0.000001 rms=0.001813 Jy/beam ! Combined flux in latest and established models = 1.12986 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 56 components and 1.12986 Jy ! Inverting map ! Added new window around map position (10.2, 31.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685841 Jy ! Component: 100 - total flux cleaned = 0.00887833 Jy ! Component: 150 - total flux cleaned = 0.00991785 Jy ! Component: 200 - total flux cleaned = 0.0111092 Jy ! Total flux subtracted in 200 components = 0.0111092 Jy ! Clean residual min=-0.006912 max=0.007555 Jy/beam ! Clean residual mean=0.000003 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 1.14097 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 80 components and 1.14097 Jy ! Inverting map ! Added new window around map position (-0.8, -19.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483101 Jy ! Component: 100 - total flux cleaned = 0.00633174 Jy ! Component: 150 - total flux cleaned = 0.00732749 Jy ! Component: 200 - total flux cleaned = 0.00880695 Jy ! Total flux subtracted in 200 components = 0.00880695 Jy ! Clean residual min=-0.006295 max=0.006281 Jy/beam ! Clean residual mean=0.000001 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 1.14978 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 99 components and 1.14978 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.739 mas, bmaj=3.61 mas, bpa=7.256 degrees ! Estimated noise=3.00199 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403616 Jy ! Component: 100 - total flux cleaned = 0.00659537 Jy ! Component: 150 - total flux cleaned = 0.00864595 Jy ! Component: 200 - total flux cleaned = 0.00955541 Jy ! Total flux subtracted in 200 components = 0.00955541 Jy ! Clean residual min=-0.007312 max=0.007017 Jy/beam ! Clean residual mean=-0.000001 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 1.15933 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418517 Jy ! Component: 100 - total flux cleaned = 0.000515078 Jy ! Component: 150 - total flux cleaned = 0.000791977 Jy ! Component: 200 - total flux cleaned = 0.00105465 Jy ! Total flux subtracted in 200 components = 0.00105465 Jy ! Clean residual min=-0.006742 max=0.006598 Jy/beam ! Clean residual mean=-0.000001 rms=0.001827 Jy/beam ! Combined flux in latest and established models = 1.16039 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 135 components and 1.16039 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7255 mas, bmaj=1.828 mas, bpa=3.083 degrees ! Estimated noise=2.01783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00227676 Jy ! Component: 100 - total flux cleaned = -0.00226424 Jy ! Component: 150 - total flux cleaned = -0.00269904 Jy ! Component: 200 - total flux cleaned = -0.00311197 Jy ! Total flux subtracted in 200 components = -0.00311197 Jy ! Clean residual min=-0.005774 max=0.005229 Jy/beam ! Clean residual mean=0.000001 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 1.15727 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 149 components and 1.15727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061772Jy sigma=0.304474 ! Fit after self-cal, rms=0.061489Jy sigma=0.302730 wmodel J2358-1020_X_g_map.mod ! Writing 149 model components to file: J2358-1020_X_g_map.mod wobs J2358-1020_X_g_uvs.fits ! Writing UV FITS file: J2358-1020_X_g_uvs.fits wwins J2358-1020_X_g_map.win ! wwins: Wrote 8 windows to J2358-1020_X_g_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000492699 Jy ! Component: 100 - total flux cleaned = -0.000222443 Jy ! Component: 150 - total flux cleaned = -0.000221025 Jy ! Component: 200 - total flux cleaned = -6.05013e-05 Jy ! Component: 250 - total flux cleaned = -0.000139382 Jy ! Component: 300 - total flux cleaned = -0.000289268 Jy ! Component: 350 - total flux cleaned = -0.000437228 Jy ! Component: 400 - total flux cleaned = -0.000798972 Jy ! Component: 450 - total flux cleaned = -0.00101173 Jy ! Component: 500 - total flux cleaned = -0.0010798 Jy ! Component: 550 - total flux cleaned = -0.00134794 Jy ! Component: 600 - total flux cleaned = -0.00134779 Jy ! Component: 650 - total flux cleaned = -0.00147822 Jy ! Component: 700 - total flux cleaned = -0.0018574 Jy ! Component: 750 - total flux cleaned = -0.0020435 Jy ! Component: 800 - total flux cleaned = -0.00216558 Jy ! Component: 850 - total flux cleaned = -0.00252359 Jy ! Component: 900 - total flux cleaned = -0.00246411 Jy ! Component: 950 - total flux cleaned = -0.00280896 Jy ! Component: 1000 - total flux cleaned = -0.00286739 Jy ! Component: 1050 - total flux cleaned = -0.00292426 Jy ! Component: 1100 - total flux cleaned = -0.00303411 Jy ! Component: 1150 - total flux cleaned = -0.00308968 Jy ! Component: 1200 - total flux cleaned = -0.00345748 Jy ! Component: 1250 - total flux cleaned = -0.00340525 Jy ! Component: 1300 - total flux cleaned = -0.003457 Jy ! Component: 1350 - total flux cleaned = -0.00360737 Jy ! Component: 1400 - total flux cleaned = -0.00375473 Jy ! Component: 1450 - total flux cleaned = -0.00385152 Jy ! Component: 1500 - total flux cleaned = -0.00399334 Jy ! Component: 1550 - total flux cleaned = -0.00403963 Jy ! Component: 1600 - total flux cleaned = -0.00403919 Jy ! Component: 1650 - total flux cleaned = -0.00408537 Jy ! Component: 1700 - total flux cleaned = -0.00408529 Jy ! Component: 1750 - total flux cleaned = -0.004307 Jy ! Component: 1800 - total flux cleaned = -0.00435128 Jy ! Component: 1850 - total flux cleaned = -0.00430803 Jy ! Component: 1900 - total flux cleaned = -0.00456268 Jy ! Component: 1950 - total flux cleaned = -0.00452098 Jy ! Component: 2000 - total flux cleaned = -0.0046867 Jy ! Component: 2050 - total flux cleaned = -0.00480971 Jy ! Component: 2100 - total flux cleaned = -0.00480963 Jy ! Component: 2150 - total flux cleaned = -0.00508753 Jy ! Component: 2200 - total flux cleaned = -0.00508752 Jy ! Component: 2250 - total flux cleaned = -0.00516504 Jy ! Component: 2300 - total flux cleaned = -0.00516542 Jy ! Component: 2350 - total flux cleaned = -0.00516605 Jy ! Component: 2400 - total flux cleaned = -0.00542846 Jy ! Component: 2450 - total flux cleaned = -0.00546521 Jy ! Component: 2500 - total flux cleaned = -0.00539239 Jy ! Component: 2550 - total flux cleaned = -0.00560969 Jy ! Component: 2600 - total flux cleaned = -0.00560963 Jy ! Component: 2650 - total flux cleaned = -0.00560942 Jy ! Component: 2700 - total flux cleaned = -0.00578364 Jy ! Component: 2750 - total flux cleaned = -0.00574915 Jy ! Component: 2800 - total flux cleaned = -0.00585173 Jy ! Component: 2850 - total flux cleaned = -0.00591876 Jy ! Component: 2900 - total flux cleaned = -0.00591883 Jy ! Component: 2950 - total flux cleaned = -0.00595161 Jy ! Component: 3000 - total flux cleaned = -0.0061146 Jy ! Component: 3050 - total flux cleaned = -0.00598539 Jy ! Component: 3100 - total flux cleaned = -0.006177 Jy ! Component: 3150 - total flux cleaned = -0.00614515 Jy ! Component: 3200 - total flux cleaned = -0.00627051 Jy ! Component: 3250 - total flux cleaned = -0.00623948 Jy ! Component: 3300 - total flux cleaned = -0.00642414 Jy ! Component: 3350 - total flux cleaned = -0.00651553 Jy ! Component: 3400 - total flux cleaned = -0.00651462 Jy ! Component: 3450 - total flux cleaned = -0.00654489 Jy ! Component: 3500 - total flux cleaned = -0.00660467 Jy ! Component: 3550 - total flux cleaned = -0.00660464 Jy ! Component: 3600 - total flux cleaned = -0.00669161 Jy ! Component: 3650 - total flux cleaned = -0.00677773 Jy ! Component: 3700 - total flux cleaned = -0.00677799 Jy ! Component: 3750 - total flux cleaned = -0.0068341 Jy ! Component: 3800 - total flux cleaned = -0.00677845 Jy ! Component: 3850 - total flux cleaned = -0.00694503 Jy ! Component: 3900 - total flux cleaned = -0.0069997 Jy ! Component: 3950 - total flux cleaned = -0.00697227 Jy ! Component: 4000 - total flux cleaned = -0.00697227 Jy ! Component: 4050 - total flux cleaned = -0.00710683 Jy ! Total flux subtracted in 4096 components = -0.00707999 Jy ! Clean residual min=-0.001325 max=0.001447 Jy/beam ! Clean residual mean=0.000000 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 1.15019 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 457 components and 1.15019 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2358-1020_X_g_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7255 x 1.828 at 3.083 degrees (North through East) ! Clean map min=-0.0051713 max=0.92242 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2358-1020_X_g_map.fits wmodel /image_prod/ug002_uva//J2358-1020_X_g_map.mod ! Writing 457 model components to file: /image_prod/ug002_uva//J2358-1020_X_g_map.mod wobs /image_prod/ug002_uva//J2358-1020_X_g_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2358-1020_X_g_uvs.fits wwins /image_prod/ug002_uva//J2358-1020_X_g_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J2358-1020_X_g_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.922421 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000463003 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.150583 0.150583 0.301166 0.602332 1.20466 2.40933 4.81866 9.63731 19.2746 38.5492 77.0985 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.922 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1992.26 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2358-1020_X_g_dfm.log closed on Thu Mar 5 06:34:25 2020