! Started logfile: /image_prod/ug002_uva//J2358+0430_X_dfm.log on Thu Mar  5 06:32:14 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J2358+0430_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2358+0430_X_uva.fits
! AN table 1: 60 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.911852 visibilities/baseline/integration-bin.
! Found source: J2358+0430
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 29544 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2358+0430_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.010775Jy  sigma=8.754758
! Fit after  self-cal, rms=0.872686Jy  sigma=7.551191
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6515 mas, bmaj=1.758 mas, bpa=-4.319 degrees
! Estimated noise=0.816187 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0941008 Jy
! Component: 100  -  total flux cleaned = 0.120495 Jy
! Total flux subtracted in 100 components = 0.120495 Jy
! Clean residual min=-0.004724 max=0.011926 Jy/beam
! Clean residual mean=-0.000004 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.120495 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.120495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065847Jy  sigma=0.536999
! Fit after  self-cal, rms=0.065656Jy  sigma=0.535541
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0137546 Jy
! Component: 100  -  total flux cleaned = 0.0217046 Jy
! Total flux subtracted in 100 components = 0.0217046 Jy
! Clean residual min=-0.003459 max=0.007158 Jy/beam
! Clean residual mean=-0.000002 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.1422 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.1422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061342Jy  sigma=0.495047
! Fit after  self-cal, rms=0.061290Jy  sigma=0.494629
! Inverting map 
! Added new window around map position (0.6, 2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00717662 Jy
! Component: 100  -  total flux cleaned = 0.0115289 Jy
! Total flux subtracted in 100 components = 0.0115289 Jy
! Clean residual min=-0.002991 max=0.004595 Jy/beam
! Clean residual mean=-0.000002 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.153729 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 31 components and 0.153729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059982Jy  sigma=0.482109
! Fit after  self-cal, rms=0.059923Jy  sigma=0.481542
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.84 mas, bmaj=2.01 mas, bpa=-4.329 degrees
! Estimated noise=0.483274 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00606892 Jy
! Component: 100  -  total flux cleaned = 0.00979331 Jy
! Component: 150  -  total flux cleaned = 0.0122682 Jy
! Component: 200  -  total flux cleaned = 0.0139578 Jy
! Total flux subtracted in 200 components = 0.0139578 Jy
! Clean residual min=-0.003110 max=0.003416 Jy/beam
! Clean residual mean=-0.000002 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.167687 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 47 components and 0.167687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059256Jy  sigma=0.475232
! Fit after  self-cal, rms=0.059237Jy  sigma=0.474942
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.84 x 2.01 at -4.329 degrees (North through East)
! Clean map  min=-0.0028995  max=0.12554 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.02     KP        1.04     
!   LA        1.03     MK        1.02     NL        1.12     OV        1.00     
!   PT        0.90     SC        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.93     KP        1.01     
!   LA        1.03     MK        1.02     NL        1.13     OV        1.00     
!   PT        0.93     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.99     KP        1.04     
!   LA        0.99     MK        0.98     NL        1.12     OV        0.98     
!   PT        0.90     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        0.99     KP        1.02     
!   LA        1.04     MK        1.02     NL        1.10     OV        0.99     
!   PT        0.92     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.00     HN        0.96     KP        1.03     
!   LA        1.00     MK        1.01     NL        1.11     OV        1.02     
!   PT        0.88     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.94     KP        1.03     
!   LA        0.96     MK        0.96     NL        1.16     OV        0.97     
!   PT        0.89     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        0.97     KP        1.02     
!   LA        0.99     MK        1.05     NL        1.15     OV        1.00     
!   PT        0.86     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.00     KP        1.06     
!   LA        1.00     MK        1.00     NL        1.09     OV        0.97     
!   PT        0.91     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        0.99     KP        1.02     
!   LA        1.02     MK        0.94     NL        1.10     OV        0.99     
!   PT        0.90     SC        1.09     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        0.98     KP        1.04     
!   LA        0.98     MK        1.04     NL        1.13     OV        0.98     
!   PT        0.89     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.97     HN        0.95     KP        1.05     
!   LA        0.99     MK        0.95     NL        1.10     OV        0.94     
!   PT        0.91     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.93     HN        0.99     KP        1.07     
!   LA        0.99     MK        1.02     NL        1.12     OV        0.98     
!   PT        0.90     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.059237Jy  sigma=0.474942
! Fit after  self-cal, rms=0.057235Jy  sigma=0.465698
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8437 mas, bmaj=2.019 mas, bpa=-4.431 degrees
! Estimated noise=0.482247 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.06104e-05 Jy
! Component: 100  -  total flux cleaned = -0.000217066 Jy
! Component: 150  -  total flux cleaned = -0.00035086 Jy
! Component: 200  -  total flux cleaned = -0.000471006 Jy
! Total flux subtracted in 200 components = -0.000471006 Jy
! Clean residual min=-0.001630 max=0.001652 Jy/beam
! Clean residual mean=0.000001 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.167216 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 56 components and 0.167216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057214Jy  sigma=0.465517
! Fit after  self-cal, rms=0.057211Jy  sigma=0.465402
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057211Jy  sigma=0.465402
! Fit after  self-cal, rms=0.057398Jy  sigma=0.462200
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8437 mas, bmaj=2.019 mas, bpa=-4.436 degrees
! Estimated noise=0.482615 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.83327e-06 Jy
! Component: 100  -  total flux cleaned = -6.80283e-05 Jy
! Component: 150  -  total flux cleaned = -0.000120932 Jy
! Component: 200  -  total flux cleaned = -0.00017266 Jy
! Total flux subtracted in 200 components = -0.00017266 Jy
! Clean residual min=-0.001069 max=0.001066 Jy/beam
! Clean residual mean=0.000000 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.167043 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 58 components and 0.167043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057389Jy  sigma=0.462113
! Fit after  self-cal, rms=0.057402Jy  sigma=0.462070
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.31657e-05 Jy
! Component: 100  -  total flux cleaned = 5.33798e-06 Jy
! Component: 150  -  total flux cleaned = -3.45702e-05 Jy
! Component: 200  -  total flux cleaned = -7.89986e-05 Jy
! Total flux subtracted in 200 components = -7.89986e-05 Jy
! Clean residual min=-0.001063 max=0.001051 Jy/beam
! Clean residual mean=0.000000 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.166964 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 61 components and 0.166964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057396Jy  sigma=0.462027
! Fit after  self-cal, rms=0.057395Jy  sigma=0.462013
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057395Jy  sigma=0.462013
! Fit after  self-cal, rms=0.057641Jy  sigma=0.461817
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8438 mas, bmaj=2.019 mas, bpa=-4.43 degrees
! Estimated noise=0.482688 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.51032e-05 Jy
! Component: 100  -  total flux cleaned = -2.88644e-06 Jy
! Component: 150  -  total flux cleaned = -2.99334e-05 Jy
! Component: 200  -  total flux cleaned = -5.42441e-05 Jy
! Total flux subtracted in 200 components = -5.42441e-05 Jy
! Clean residual min=-0.001011 max=0.000980 Jy/beam
! Clean residual mean=0.000000 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.16691 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 66 components and 0.16691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057636Jy  sigma=0.461779
! Fit after  self-cal, rms=0.057641Jy  sigma=0.461765
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.23608e-05 Jy
! Component: 100  -  total flux cleaned = 1.21407e-05 Jy
! Component: 150  -  total flux cleaned = -4.64463e-06 Jy
! Component: 200  -  total flux cleaned = -2.6626e-05 Jy
! Total flux subtracted in 200 components = -2.6626e-05 Jy
! Clean residual min=-0.001009 max=0.000955 Jy/beam
! Clean residual mean=0.000000 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.166883 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 67 components and 0.166883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057637Jy  sigma=0.461740
! Fit after  self-cal, rms=0.057637Jy  sigma=0.461731
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057637Jy  sigma=0.461731
! Fit after  self-cal, rms=0.057648Jy  sigma=0.461726
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.122 mas, bmaj=3.175 mas, bpa=-0.804 degrees
! Estimated noise=0.617245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128917 Jy
! Component: 100  -  total flux cleaned = 0.000113629 Jy
! Component: 150  -  total flux cleaned = 8.2143e-05 Jy
! Component: 200  -  total flux cleaned = 5.80206e-05 Jy
! Total flux subtracted in 200 components = 5.80206e-05 Jy
! Clean residual min=-0.001289 max=0.001112 Jy/beam
! Clean residual mean=0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.166941 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 69 components and 0.166941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057648Jy  sigma=0.461719
! Fit after  self-cal, rms=0.057647Jy  sigma=0.461712
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.20464e-05 Jy
! Component: 100  -  total flux cleaned = 2.40856e-06 Jy
! Component: 150  -  total flux cleaned = -1.53365e-05 Jy
! Component: 200  -  total flux cleaned = -2.55351e-05 Jy
! Total flux subtracted in 200 components = -2.55351e-05 Jy
! Clean residual min=-0.001280 max=0.001096 Jy/beam
! Clean residual mean=0.000001 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.166915 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 72 components and 0.166915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057648Jy  sigma=0.461712
! Fit after  self-cal, rms=0.057647Jy  sigma=0.461709
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8436 mas, bmaj=2.019 mas, bpa=-4.42 degrees
! Estimated noise=0.482746 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8436 x 2.019 at -4.42 degrees (North through East)
! Clean map  min=-0.00090269  max=0.12479 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6528 mas, bmaj=1.762 mas, bpa=-4.425 degrees
! Estimated noise=0.820298 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0941437 Jy
! Component: 100  -  total flux cleaned = 0.123331 Jy
! Component: 150  -  total flux cleaned = 0.137545 Jy
! Component: 200  -  total flux cleaned = 0.145957 Jy
! Total flux subtracted in 200 components = 0.145957 Jy
! Clean residual min=-0.002318 max=0.004481 Jy/beam
! Clean residual mean=-0.000001 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.145957 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.145957 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8436 mas, bmaj=2.019 mas, bpa=-4.42 degrees
! Estimated noise=0.482746 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00819753 Jy
! Component: 100  -  total flux cleaned = 0.0129572 Jy
! Component: 150  -  total flux cleaned = 0.0158698 Jy
! Component: 200  -  total flux cleaned = 0.0176908 Jy
! Total flux subtracted in 200 components = 0.0176908 Jy
! Clean residual min=-0.001163 max=0.001121 Jy/beam
! Clean residual mean=-0.000000 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.163648 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 41 components and 0.163648 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.122 mas, bmaj=3.175 mas, bpa=-0.804 degrees
! Estimated noise=0.617245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00182679 Jy
! Component: 100  -  total flux cleaned = 0.00266712 Jy
! Component: 150  -  total flux cleaned = 0.00303035 Jy
! Component: 200  -  total flux cleaned = 0.00308538 Jy
! Total flux subtracted in 200 components = 0.00308538 Jy
! Clean residual min=-0.001266 max=0.001121 Jy/beam
! Clean residual mean=0.000000 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.166733 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.52681e-05 Jy
! Component: 100  -  total flux cleaned = 6.4596e-05 Jy
! Component: 150  -  total flux cleaned = 8.95718e-05 Jy
! Component: 200  -  total flux cleaned = 9.47788e-05 Jy
! Total flux subtracted in 200 components = 9.47788e-05 Jy
! Clean residual min=-0.001265 max=0.001121 Jy/beam
! Clean residual mean=0.000000 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.166828 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 60 components and 0.166828 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8436 mas, bmaj=2.019 mas, bpa=-4.42 degrees
! Estimated noise=0.482746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000323925 Jy
! Component: 100  -  total flux cleaned = -0.000302103 Jy
! Component: 150  -  total flux cleaned = -0.000282667 Jy
! Component: 200  -  total flux cleaned = -0.000266288 Jy
! Total flux subtracted in 200 components = -0.000266288 Jy
! Clean residual min=-0.001034 max=0.000974 Jy/beam
! Clean residual mean=0.000000 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.166562 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 64 components and 0.166562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057645Jy  sigma=0.461715
! Fit after  self-cal, rms=0.057640Jy  sigma=0.461669
wmodel J2358+0430_X_map.mod
! Writing 64 model components to file: J2358+0430_X_map.mod
wobs   J2358+0430_X_uvs.fits
! Writing UV FITS file: J2358+0430_X_uvs.fits
wwins  J2358+0430_X_map.win
! wwins: Wrote 2 windows to J2358+0430_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00019278 Jy
! Component: 100  -  total flux cleaned = -7.93515e-05 Jy
! Component: 150  -  total flux cleaned = 9.28067e-05 Jy
! Component: 200  -  total flux cleaned = 0.000198569 Jy
! Component: 250  -  total flux cleaned = 0.000301465 Jy
! Component: 300  -  total flux cleaned = 0.000387719 Jy
! Component: 350  -  total flux cleaned = 0.000471961 Jy
! Component: 400  -  total flux cleaned = 0.00056815 Jy
! Component: 450  -  total flux cleaned = 0.00068934 Jy
! Component: 500  -  total flux cleaned = 0.000768515 Jy
! Component: 550  -  total flux cleaned = 0.000846436 Jy
! Component: 600  -  total flux cleaned = 0.000923091 Jy
! Component: 650  -  total flux cleaned = 0.000986103 Jy
! Component: 700  -  total flux cleaned = 0.0010108 Jy
! Component: 750  -  total flux cleaned = 0.00099848 Jy
! Component: 800  -  total flux cleaned = 0.00103494 Jy
! Component: 850  -  total flux cleaned = 0.000987063 Jy
! Component: 900  -  total flux cleaned = 0.00101086 Jy
! Component: 950  -  total flux cleaned = 0.000952313 Jy
! Component: 1000  -  total flux cleaned = 0.000906287 Jy
! Component: 1050  -  total flux cleaned = 0.000929084 Jy
! Component: 1100  -  total flux cleaned = 0.000872364 Jy
! Component: 1150  -  total flux cleaned = 0.000906164 Jy
! Component: 1200  -  total flux cleaned = 0.000839275 Jy
! Component: 1250  -  total flux cleaned = 0.000784219 Jy
! Component: 1300  -  total flux cleaned = 0.000740572 Jy
! Component: 1350  -  total flux cleaned = 0.000675718 Jy
! Component: 1400  -  total flux cleaned = 0.000633025 Jy
! Component: 1450  -  total flux cleaned = 0.000590508 Jy
! Component: 1500  -  total flux cleaned = 0.000558833 Jy
! Component: 1550  -  total flux cleaned = 0.000506719 Jy
! Component: 1600  -  total flux cleaned = 0.000486152 Jy
! Component: 1650  -  total flux cleaned = 0.0004657 Jy
! Component: 1700  -  total flux cleaned = 0.000434962 Jy
! Component: 1750  -  total flux cleaned = 0.000364258 Jy
! Component: 1800  -  total flux cleaned = 0.000324215 Jy
! Component: 1850  -  total flux cleaned = 0.000304316 Jy
! Component: 1900  -  total flux cleaned = 0.000264735 Jy
! Component: 1950  -  total flux cleaned = 0.000235292 Jy
! Component: 2000  -  total flux cleaned = 0.000167224 Jy
! Component: 2050  -  total flux cleaned = 0.000167123 Jy
! Component: 2100  -  total flux cleaned = 0.000157566 Jy
! Component: 2150  -  total flux cleaned = 0.000167014 Jy
! Component: 2200  -  total flux cleaned = 0.000119709 Jy
! Component: 2250  -  total flux cleaned = 0.000119671 Jy
! Component: 2300  -  total flux cleaned = 0.000100926 Jy
! Component: 2350  -  total flux cleaned = 7.30747e-05 Jy
! Component: 2400  -  total flux cleaned = 6.39173e-05 Jy
! Component: 2450  -  total flux cleaned = 6.38383e-05 Jy
! Component: 2500  -  total flux cleaned = 5.47037e-05 Jy
! Component: 2550  -  total flux cleaned = 3.65639e-05 Jy
! Component: 2600  -  total flux cleaned = 2.76538e-05 Jy
! Component: 2650  -  total flux cleaned = 4.54557e-05 Jy
! Component: 2700  -  total flux cleaned = -7.57506e-06 Jy
! Component: 2750  -  total flux cleaned = 4.52134e-05 Jy
! Component: 2800  -  total flux cleaned = 1.60298e-06 Jy
! Component: 2850  -  total flux cleaned = -2.45131e-05 Jy
! Component: 2900  -  total flux cleaned = 1.4084e-06 Jy
! Component: 2950  -  total flux cleaned = -4.16091e-05 Jy
! Component: 3000  -  total flux cleaned = -2.45226e-05 Jy
! Component: 3050  -  total flux cleaned = -5.00751e-05 Jy
! Component: 3100  -  total flux cleaned = -4.16462e-05 Jy
! Component: 3150  -  total flux cleaned = -5.84082e-05 Jy
! Component: 3200  -  total flux cleaned = -8.34852e-05 Jy
! Component: 3250  -  total flux cleaned = -6.68547e-05 Jy
! Component: 3300  -  total flux cleaned = -9.16552e-05 Jy
! Component: 3350  -  total flux cleaned = -5.87742e-05 Jy
! Component: 3400  -  total flux cleaned = -5.87654e-05 Jy
! Component: 3450  -  total flux cleaned = -7.50407e-05 Jy
! Component: 3500  -  total flux cleaned = -5.87559e-05 Jy
! Component: 3550  -  total flux cleaned = -5.87384e-05 Jy
! Component: 3600  -  total flux cleaned = -6.67267e-05 Jy
! Component: 3650  -  total flux cleaned = -9.075e-05 Jy
! Component: 3700  -  total flux cleaned = -9.86574e-05 Jy
! Component: 3750  -  total flux cleaned = -8.28313e-05 Jy
! Component: 3800  -  total flux cleaned = -8.2778e-05 Jy
! Component: 3850  -  total flux cleaned = -9.0619e-05 Jy
! Component: 3900  -  total flux cleaned = -5.16244e-05 Jy
! Component: 3950  -  total flux cleaned = -9.04094e-05 Jy
! Component: 4000  -  total flux cleaned = -8.27392e-05 Jy
! Component: 4050  -  total flux cleaned = -0.000113412 Jy
! Total flux subtracted in 4096 components = -0.000105815 Jy
! Clean residual min=-0.000395 max=0.000487 Jy/beam
! Clean residual mean=0.000000 rms=0.000133 Jy/beam
! Combined flux in latest and established models = 0.166456 Jy
keep
! Adding 337 model components to the UV plane model.
! The established model now contains 401 components and 0.166456 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2358+0430_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8436 x 2.019 at -4.42 degrees (North through East)
! Clean map  min=-0.00074779  max=0.12492 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2358+0430_X_map.fits
wmodel /image_prod/ug002_uva//J2358+0430_X_map.mod
! Writing 401 model components to file: /image_prod/ug002_uva//J2358+0430_X_map.mod
wobs   /image_prod/ug002_uva//J2358+0430_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2358+0430_X_uvs.fits
wwins  /image_prod/ug002_uva//J2358+0430_X_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J2358+0430_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.124919 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000132772 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.31886 0.31886 0.637721 1.27544 2.55088 5.10177 10.2035 20.4071 40.8141 81.6283
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.124 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  940.85 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2358+0430_X_dfm.log closed on Thu Mar  5 06:32:19 2020