! Started logfile: /image_prod/ug002_uva//J2357-1125_X_dfm.log on Thu Mar 5 06:31:53 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2357-1125_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2357-1125_X_uva.fits ! AN table 1: 50 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973778 visibilities/baseline/integration-bin. ! Found source: J2357-1125 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 26292 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2357-1125_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.249501Jy sigma=7.950678 ! Fit after self-cal, rms=0.442630Jy sigma=3.207489 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6381 mas, bmaj=1.595 mas, bpa=-2.796 degrees ! Estimated noise=1.17512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.450649 Jy ! Component: 100 - total flux cleaned = 0.597007 Jy ! Total flux subtracted in 100 components = 0.597007 Jy ! Clean residual min=-0.046453 max=0.154382 Jy/beam ! Clean residual mean=0.000122 rms=0.012349 Jy/beam ! Combined flux in latest and established models = 0.597007 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.597007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.343672Jy sigma=1.989634 ! Fit after self-cal, rms=0.343503Jy sigma=1.987199 ! Inverting map ! Added new window around map position (0.2, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138935 Jy ! Component: 100 - total flux cleaned = 0.216758 Jy ! Total flux subtracted in 100 components = 0.216758 Jy ! Clean residual min=-0.036247 max=0.063136 Jy/beam ! Clean residual mean=0.000080 rms=0.008183 Jy/beam ! Combined flux in latest and established models = 0.813765 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.813765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.228729Jy sigma=1.339806 ! Fit after self-cal, rms=0.220583Jy sigma=1.266955 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0722402 Jy ! Component: 100 - total flux cleaned = 0.118059 Jy ! Total flux subtracted in 100 components = 0.118059 Jy ! Clean residual min=-0.026529 max=0.044184 Jy/beam ! Clean residual mean=0.000057 rms=0.005663 Jy/beam ! Combined flux in latest and established models = 0.931824 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.931824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.166055Jy sigma=0.973149 ! Fit after self-cal, rms=0.162372Jy sigma=0.941160 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0438821 Jy ! Component: 100 - total flux cleaned = 0.0728026 Jy ! Total flux subtracted in 100 components = 0.0728026 Jy ! Clean residual min=-0.022807 max=0.033425 Jy/beam ! Clean residual mean=0.000043 rms=0.004454 Jy/beam ! Combined flux in latest and established models = 1.00463 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 1.00463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134500Jy sigma=0.798025 ! Fit after self-cal, rms=0.132687Jy sigma=0.782654 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286239 Jy ! Component: 100 - total flux cleaned = 0.0483814 Jy ! Total flux subtracted in 100 components = 0.0483814 Jy ! Clean residual min=-0.020773 max=0.025945 Jy/beam ! Clean residual mean=0.000033 rms=0.003826 Jy/beam ! Combined flux in latest and established models = 1.05301 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 1.05301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117621Jy sigma=0.709011 ! Fit after self-cal, rms=0.116863Jy sigma=0.702353 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7904 mas, bmaj=1.89 mas, bpa=-2.146 degrees ! Estimated noise=0.676878 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.03781 Jy ! Component: 100 - total flux cleaned = 0.0627857 Jy ! Component: 150 - total flux cleaned = 0.0812216 Jy ! Component: 200 - total flux cleaned = 0.0952173 Jy ! Total flux subtracted in 200 components = 0.0952173 Jy ! Clean residual min=-0.017216 max=0.020966 Jy/beam ! Clean residual mean=0.000037 rms=0.004023 Jy/beam ! Combined flux in latest and established models = 1.14823 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 61 components and 1.14823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097665Jy sigma=0.600879 ! Fit after self-cal, rms=0.096103Jy sigma=0.591527 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7904 x 1.89 at -2.146 degrees (North through East) ! Clean map min=-0.01667 max=0.61006 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.94 KP 1.05 ! LA 0.96 MK 1.01 NL 1.11 OV 0.98 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.96 KP 1.05 ! LA 0.96 MK 1.01 NL 1.11 OV 0.98 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.97 KP 1.05 ! LA 0.98 MK 0.96 NL 1.11 OV 0.98 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.94 KP 1.04 ! LA 0.98 MK 1.00 NL 1.11 OV 0.98 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.96 KP 1.06 ! LA 0.98 MK 1.01 NL 1.11 OV 0.99 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.98 KP 1.06 ! LA 0.99 MK 1.00 NL 1.10 OV 0.98 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.99 KP 1.06 ! LA 0.98 MK 1.01 NL 1.13 OV 0.98 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.97 KP 1.05 ! LA 0.99 MK 1.01 NL 1.12 OV 0.99 ! PT 0.88 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.00 KP 1.07 ! LA 0.98 MK 1.00 NL 1.11 OV 0.99 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 0.99 KP 1.05 ! LA 0.99 MK 1.01 NL 1.12 OV 0.99 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 1.08 ! LA 1.00 MK 1.04 NL 1.11 OV 1.01 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.03 KP 1.04 ! LA 0.99 MK 1.03 NL 1.13 OV 1.03 ! PT 0.87 SC 1.02 ! ! ! Fit before self-cal, rms=0.096103Jy sigma=0.591527 ! Fit after self-cal, rms=0.070088Jy sigma=0.456107 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.792 mas, bmaj=1.894 mas, bpa=-1.927 degrees ! Estimated noise=0.673871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115511 Jy ! Component: 100 - total flux cleaned = 0.0147743 Jy ! Component: 150 - total flux cleaned = 0.0181526 Jy ! Component: 200 - total flux cleaned = 0.0214573 Jy ! Total flux subtracted in 200 components = 0.0214573 Jy ! Clean residual min=-0.006983 max=0.008443 Jy/beam ! Clean residual mean=0.000004 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 1.16968 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 85 components and 1.16968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066377Jy sigma=0.434656 ! Fit after self-cal, rms=0.066189Jy sigma=0.433555 ! Inverting map ! Added new window around map position (1.6, 15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781915 Jy ! Component: 100 - total flux cleaned = 0.0109726 Jy ! Component: 150 - total flux cleaned = 0.0125037 Jy ! Component: 200 - total flux cleaned = 0.0133587 Jy ! Total flux subtracted in 200 components = 0.0133587 Jy ! Clean residual min=-0.006478 max=0.007279 Jy/beam ! Clean residual mean=0.000001 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 1.18304 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 97 components and 1.18304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064742Jy sigma=0.424232 ! Fit after self-cal, rms=0.064670Jy sigma=0.423823 ! Inverting map ! Added new window around map position (-12.6, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648311 Jy ! Component: 100 - total flux cleaned = 0.00881184 Jy ! Component: 150 - total flux cleaned = 0.0103714 Jy ! Component: 200 - total flux cleaned = 0.010938 Jy ! Total flux subtracted in 200 components = 0.010938 Jy ! Clean residual min=-0.005739 max=0.006174 Jy/beam ! Clean residual mean=0.000002 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 1.19398 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 118 components and 1.19398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063595Jy sigma=0.417405 ! Fit after self-cal, rms=0.063543Jy sigma=0.417092 ! Inverting map ! Added new window around map position (-1.4, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00604825 Jy ! Component: 100 - total flux cleaned = 0.00762165 Jy ! Component: 150 - total flux cleaned = 0.00748001 Jy ! Component: 200 - total flux cleaned = 0.0078513 Jy ! Total flux subtracted in 200 components = 0.0078513 Jy ! Clean residual min=-0.005203 max=0.004906 Jy/beam ! Clean residual mean=0.000002 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 1.20183 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 136 components and 1.20183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062749Jy sigma=0.411929 ! Fit after self-cal, rms=0.062725Jy sigma=0.411733 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062725Jy sigma=0.411733 ! Fit after self-cal, rms=0.061349Jy sigma=0.403992 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7917 mas, bmaj=1.895 mas, bpa=-1.9 degrees ! Estimated noise=0.674663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000878077 Jy ! Component: 100 - total flux cleaned = 0.000855526 Jy ! Component: 150 - total flux cleaned = 0.000853911 Jy ! Component: 200 - total flux cleaned = 0.000749126 Jy ! Total flux subtracted in 200 components = 0.000749126 Jy ! Clean residual min=-0.004874 max=0.003878 Jy/beam ! Clean residual mean=-0.000000 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 1.20258 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 158 components and 1.20258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060906Jy sigma=0.400958 ! Fit after self-cal, rms=0.060888Jy sigma=0.400807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256088 Jy ! Component: 100 - total flux cleaned = 0.000260709 Jy ! Component: 150 - total flux cleaned = 8.85144e-05 Jy ! Component: 200 - total flux cleaned = -7.37926e-05 Jy ! Total flux subtracted in 200 components = -7.37926e-05 Jy ! Clean residual min=-0.004497 max=0.003578 Jy/beam ! Clean residual mean=-0.000000 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 1.20251 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 166 components and 1.20251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060646Jy sigma=0.399202 ! Fit after self-cal, rms=0.060635Jy sigma=0.399120 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060635Jy sigma=0.399120 ! Fit after self-cal, rms=0.060523Jy sigma=0.398800 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7916 mas, bmaj=1.894 mas, bpa=-1.857 degrees ! Estimated noise=0.674772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.50062e-05 Jy ! Component: 100 - total flux cleaned = -0.000230799 Jy ! Component: 150 - total flux cleaned = -0.000311013 Jy ! Component: 200 - total flux cleaned = -0.000239018 Jy ! Total flux subtracted in 200 components = -0.000239018 Jy ! Clean residual min=-0.004181 max=0.003457 Jy/beam ! Clean residual mean=-0.000000 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 1.20227 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 174 components and 1.20227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060309Jy sigma=0.397373 ! Fit after self-cal, rms=0.060297Jy sigma=0.397268 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000134548 Jy ! Component: 100 - total flux cleaned = 6.65034e-05 Jy ! Component: 150 - total flux cleaned = -0.000194021 Jy ! Component: 200 - total flux cleaned = -0.000442819 Jy ! Total flux subtracted in 200 components = -0.000442819 Jy ! Clean residual min=-0.003933 max=0.003374 Jy/beam ! Clean residual mean=-0.000000 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 1.20182 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 182 components and 1.20182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060163Jy sigma=0.396366 ! Fit after self-cal, rms=0.060154Jy sigma=0.396299 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060154Jy sigma=0.396299 ! Fit after self-cal, rms=0.060098Jy sigma=0.396159 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.016 mas, bmaj=3.53 mas, bpa=2.491 degrees ! Estimated noise=0.993913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204624 Jy ! Component: 100 - total flux cleaned = 0.0029963 Jy ! Component: 150 - total flux cleaned = 0.00306445 Jy ! Component: 200 - total flux cleaned = 0.00306576 Jy ! Total flux subtracted in 200 components = 0.00306576 Jy ! Clean residual min=-0.003310 max=0.003874 Jy/beam ! Clean residual mean=-0.000002 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 1.20489 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 199 components and 1.20489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060010Jy sigma=0.395659 ! Fit after self-cal, rms=0.060003Jy sigma=0.395607 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 27.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311593 Jy ! Component: 100 - total flux cleaned = 0.00380805 Jy ! Component: 150 - total flux cleaned = 0.0040428 Jy ! Component: 200 - total flux cleaned = 0.00409734 Jy ! Total flux subtracted in 200 components = 0.00409734 Jy ! Clean residual min=-0.002937 max=0.003193 Jy/beam ! Clean residual mean=-0.000003 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 1.20899 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 217 components and 1.20899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059871Jy sigma=0.394898 ! Fit after self-cal, rms=0.059859Jy sigma=0.394823 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7916 mas, bmaj=1.894 mas, bpa=-1.827 degrees ! Estimated noise=0.674893 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7916 x 1.894 at -1.827 degrees (North through East) ! Clean map min=-0.0031353 max=0.60331 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059859Jy sigma=0.394823 ! Fit after self-cal, rms=0.056136Jy sigma=0.366251 ! Inverting map and beam ! Estimated beam: bmin=0.7914 mas, bmaj=1.894 mas, bpa=-1.814 degrees ! Estimated noise=0.675101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00171768 Jy ! Component: 100 - total flux cleaned = -0.00197318 Jy ! Component: 150 - total flux cleaned = -0.00213111 Jy ! Component: 200 - total flux cleaned = -0.00199002 Jy ! Total flux subtracted in 200 components = -0.00199002 Jy ! Clean residual min=-0.003056 max=0.002622 Jy/beam ! Clean residual mean=-0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 1.207 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 249 components and 1.207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055934Jy sigma=0.364751 ! Fit after self-cal, rms=0.055929Jy sigma=0.364732 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283551 Jy ! Component: 100 - total flux cleaned = 0.000349843 Jy ! Component: 150 - total flux cleaned = 0.000659582 Jy ! Component: 200 - total flux cleaned = 0.000836993 Jy ! Total flux subtracted in 200 components = 0.000836993 Jy ! Clean residual min=-0.002945 max=0.002533 Jy/beam ! Clean residual mean=-0.000001 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 1.20783 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 268 components and 1.20783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055813Jy sigma=0.363908 ! Fit after self-cal, rms=0.055812Jy sigma=0.363895 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055812Jy sigma=0.363895 ! Fit after self-cal, rms=0.055829Jy sigma=0.363852 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6395 mas, bmaj=1.599 mas, bpa=-2.481 degrees ! Estimated noise=1.17825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.458683 Jy ! Component: 100 - total flux cleaned = 0.656328 Jy ! Component: 150 - total flux cleaned = 0.77804 Jy ! Component: 200 - total flux cleaned = 0.863389 Jy ! Total flux subtracted in 200 components = 0.863389 Jy ! Clean residual min=-0.022418 max=0.048071 Jy/beam ! Clean residual mean=0.000057 rms=0.005373 Jy/beam ! Combined flux in latest and established models = 0.863389 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.863389 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7915 mas, bmaj=1.894 mas, bpa=-1.797 degrees ! Estimated noise=0.675441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0961887 Jy ! Component: 100 - total flux cleaned = 0.15347 Jy ! Component: 150 - total flux cleaned = 0.190124 Jy ! Component: 200 - total flux cleaned = 0.215003 Jy ! Total flux subtracted in 200 components = 0.215003 Jy ! Clean residual min=-0.009490 max=0.014953 Jy/beam ! Clean residual mean=0.000024 rms=0.002497 Jy/beam ! Combined flux in latest and established models = 1.07839 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 48 components and 1.07839 Jy ! Inverting map ! Added new window around map position (-0.6, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182356 Jy ! Component: 100 - total flux cleaned = 0.0325085 Jy ! Component: 150 - total flux cleaned = 0.0443016 Jy ! Component: 200 - total flux cleaned = 0.0542811 Jy ! Total flux subtracted in 200 components = 0.0542811 Jy ! Clean residual min=-0.006641 max=0.007465 Jy/beam ! Clean residual mean=0.000010 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 1.13267 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 74 components and 1.13267 Jy ! Inverting map ! Added new window around map position (1.8, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00885879 Jy ! Component: 100 - total flux cleaned = 0.0164659 Jy ! Component: 150 - total flux cleaned = 0.0232122 Jy ! Component: 200 - total flux cleaned = 0.029214 Jy ! Total flux subtracted in 200 components = 0.029214 Jy ! Clean residual min=-0.005181 max=0.004530 Jy/beam ! Clean residual mean=0.000004 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 1.16189 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 93 components and 1.16189 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.017 mas, bmaj=3.529 mas, bpa=2.53 degrees ! Estimated noise=0.994653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00835341 Jy ! Component: 100 - total flux cleaned = 0.0145507 Jy ! Component: 150 - total flux cleaned = 0.0196645 Jy ! Component: 200 - total flux cleaned = 0.023996 Jy ! Total flux subtracted in 200 components = 0.023996 Jy ! Clean residual min=-0.004231 max=0.004460 Jy/beam ! Clean residual mean=0.000001 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 1.18588 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373073 Jy ! Component: 100 - total flux cleaned = 0.00696231 Jy ! Component: 150 - total flux cleaned = 0.00978188 Jy ! Component: 200 - total flux cleaned = 0.0122539 Jy ! Total flux subtracted in 200 components = 0.0122539 Jy ! Clean residual min=-0.003464 max=0.003398 Jy/beam ! Clean residual mean=-0.000001 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 1.19814 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 155 components and 1.19814 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7915 mas, bmaj=1.894 mas, bpa=-1.797 degrees ! Estimated noise=0.675441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179958 Jy ! Component: 100 - total flux cleaned = 0.00321523 Jy ! Component: 150 - total flux cleaned = 0.00418239 Jy ! Component: 200 - total flux cleaned = 0.00481603 Jy ! Total flux subtracted in 200 components = 0.00481603 Jy ! Clean residual min=-0.003692 max=0.004061 Jy/beam ! Clean residual mean=-0.000001 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 1.20295 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 181 components and 1.20295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056467Jy sigma=0.368874 ! Fit after self-cal, rms=0.056338Jy sigma=0.367584 wmodel J2357-1125_X_map.mod ! Writing 181 model components to file: J2357-1125_X_map.mod wobs J2357-1125_X_uvs.fits ! Writing UV FITS file: J2357-1125_X_uvs.fits wwins J2357-1125_X_map.win ! wwins: Wrote 10 windows to J2357-1125_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000837994 Jy ! Component: 100 - total flux cleaned = 0.00113274 Jy ! Component: 150 - total flux cleaned = 0.00146587 Jy ! Component: 200 - total flux cleaned = 0.00188972 Jy ! Component: 250 - total flux cleaned = 0.00224325 Jy ! Component: 300 - total flux cleaned = 0.00248638 Jy ! Component: 350 - total flux cleaned = 0.00286295 Jy ! Component: 400 - total flux cleaned = 0.00313543 Jy ! Component: 450 - total flux cleaned = 0.00331111 Jy ! Component: 500 - total flux cleaned = 0.00348342 Jy ! Component: 550 - total flux cleaned = 0.0036924 Jy ! Component: 600 - total flux cleaned = 0.00385565 Jy ! Component: 650 - total flux cleaned = 0.00413438 Jy ! Component: 700 - total flux cleaned = 0.00436708 Jy ! Component: 750 - total flux cleaned = 0.00459409 Jy ! Component: 800 - total flux cleaned = 0.00485264 Jy ! Component: 850 - total flux cleaned = 0.00506871 Jy ! Component: 900 - total flux cleaned = 0.0050328 Jy ! Component: 950 - total flux cleaned = 0.00530996 Jy ! Component: 1000 - total flux cleaned = 0.0055805 Jy ! Component: 1050 - total flux cleaned = 0.00571268 Jy ! Component: 1100 - total flux cleaned = 0.00587575 Jy ! Component: 1150 - total flux cleaned = 0.00616402 Jy ! Component: 1200 - total flux cleaned = 0.00635243 Jy ! Component: 1250 - total flux cleaned = 0.00656839 Jy ! Component: 1300 - total flux cleaned = 0.00687131 Jy ! Component: 1350 - total flux cleaned = 0.00713907 Jy ! Component: 1400 - total flux cleaned = 0.00737251 Jy ! Component: 1450 - total flux cleaned = 0.00754467 Jy ! Component: 1500 - total flux cleaned = 0.00779918 Jy ! Component: 1550 - total flux cleaned = 0.00796603 Jy ! Component: 1600 - total flux cleaned = 0.00829447 Jy ! Component: 1650 - total flux cleaned = 0.00853684 Jy ! Component: 1700 - total flux cleaned = 0.00882813 Jy ! Component: 1750 - total flux cleaned = 0.00908863 Jy ! Component: 1800 - total flux cleaned = 0.00926851 Jy ! Component: 1850 - total flux cleaned = 0.00952192 Jy ! Component: 1900 - total flux cleaned = 0.00979608 Jy ! Component: 1950 - total flux cleaned = 0.00999243 Jy ! Component: 2000 - total flux cleaned = 0.0102827 Jy ! Component: 2050 - total flux cleaned = 0.0105216 Jy ! Component: 2100 - total flux cleaned = 0.0107094 Jy ! Component: 2150 - total flux cleaned = 0.0108493 Jy ! Component: 2200 - total flux cleaned = 0.0111016 Jy ! Component: 2250 - total flux cleaned = 0.0112816 Jy ! Component: 2300 - total flux cleaned = 0.0115042 Jy ! Component: 2350 - total flux cleaned = 0.0116356 Jy ! Component: 2400 - total flux cleaned = 0.0117876 Jy ! Component: 2450 - total flux cleaned = 0.0119163 Jy ! Component: 2500 - total flux cleaned = 0.0120222 Jy ! Component: 2550 - total flux cleaned = 0.0122107 Jy ! Component: 2600 - total flux cleaned = 0.0122933 Jy ! Component: 2650 - total flux cleaned = 0.0124364 Jy ! Component: 2700 - total flux cleaned = 0.012497 Jy ! Component: 2750 - total flux cleaned = 0.0125965 Jy ! Component: 2800 - total flux cleaned = 0.0126948 Jy ! Component: 2850 - total flux cleaned = 0.0128308 Jy ! Component: 2900 - total flux cleaned = 0.0128688 Jy ! Component: 2950 - total flux cleaned = 0.0128881 Jy ! Component: 3000 - total flux cleaned = 0.0129069 Jy ! Component: 3050 - total flux cleaned = 0.0129815 Jy ! Component: 3100 - total flux cleaned = 0.0130182 Jy ! Component: 3150 - total flux cleaned = 0.0130361 Jy ! Component: 3200 - total flux cleaned = 0.0130722 Jy ! Component: 3250 - total flux cleaned = 0.0130722 Jy ! Component: 3300 - total flux cleaned = 0.0131077 Jy ! Component: 3350 - total flux cleaned = 0.0131426 Jy ! Component: 3400 - total flux cleaned = 0.0131944 Jy ! Component: 3450 - total flux cleaned = 0.0132287 Jy ! Component: 3500 - total flux cleaned = 0.013229 Jy ! Component: 3550 - total flux cleaned = 0.0132455 Jy ! Component: 3600 - total flux cleaned = 0.0132124 Jy ! Component: 3650 - total flux cleaned = 0.0132783 Jy ! Component: 3700 - total flux cleaned = 0.0133272 Jy ! Component: 3750 - total flux cleaned = 0.0132786 Jy ! Component: 3800 - total flux cleaned = 0.0133744 Jy ! Component: 3850 - total flux cleaned = 0.013311 Jy ! Component: 3900 - total flux cleaned = 0.0133737 Jy ! Component: 3950 - total flux cleaned = 0.013389 Jy ! Component: 4000 - total flux cleaned = 0.0134044 Jy ! Component: 4050 - total flux cleaned = 0.0135116 Jy ! Total flux subtracted in 4096 components = 0.0135873 Jy ! Clean residual min=-0.000889 max=0.000754 Jy/beam ! Clean residual mean=-0.000000 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 1.21654 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 470 components and 1.21654 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2357-1125_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7915 x 1.894 at -1.797 degrees (North through East) ! Clean map min=-0.0023944 max=0.60574 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2357-1125_X_map.fits wmodel /image_prod/ug002_uva//J2357-1125_X_map.mod ! Writing 470 model components to file: /image_prod/ug002_uva//J2357-1125_X_map.mod wobs /image_prod/ug002_uva//J2357-1125_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2357-1125_X_uvs.fits wwins /image_prod/ug002_uva//J2357-1125_X_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J2357-1125_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.605738 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000249301 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.12347 0.12347 0.246939 0.493879 0.987758 1.97552 3.95103 7.90206 15.8041 31.6082 63.2165 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.605 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2429.75 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2357-1125_X_dfm.log closed on Thu Mar 5 06:31:59 2020