! Started logfile: /image_prod/ug002_uva//J2351-4259_S_dfm.log on Thu Mar 5 06:28:28 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2351-4259_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2351-4259_S_uva.fits ! AN table 1: 60 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.870833 visibilities/baseline/integration-bin. ! Found source: J2351-4259 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 4389 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2351-4259_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011504Jy sigma=5.699696 ! Fit after self-cal, rms=0.917188Jy sigma=5.145409 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.472 mas, bmaj=8.346 mas, bpa=-0.5699 degrees ! Estimated noise=3.45618 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0696199 Jy ! Component: 100 - total flux cleaned = 0.0848912 Jy ! Total flux subtracted in 100 components = 0.0848912 Jy ! Clean residual min=-0.007340 max=0.008219 Jy/beam ! Clean residual mean=-0.000058 rms=0.002016 Jy/beam ! Combined flux in latest and established models = 0.0848912 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0848912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.092247Jy sigma=0.465878 ! Fit after self-cal, rms=0.091757Jy sigma=0.462067 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=10.23 mas, bpa=0.07923 degrees ! Estimated noise=1.94884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00609028 Jy ! Component: 100 - total flux cleaned = 0.00851398 Jy ! Component: 150 - total flux cleaned = 0.00899725 Jy ! Component: 200 - total flux cleaned = 0.00917796 Jy ! Total flux subtracted in 200 components = 0.00917796 Jy ! Clean residual min=-0.004063 max=0.005954 Jy/beam ! Clean residual mean=-0.000080 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.0940692 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.0940691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.091567Jy sigma=0.459020 ! Fit after self-cal, rms=0.091592Jy sigma=0.458931 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.271 x 10.23 at 0.07923 degrees (North through East) ! Clean map min=-0.0038405 max=0.089191 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.08 KP 0.95 LA 0.96 MK 0.96 ! NL 1.27 OV 1.03 PT 0.95 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.90 KP 0.93 LA 0.89 MK 0.94 ! NL 1.44 OV 1.05 PT 1.01 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.91 KP 1.00 LA 0.95 MK 1.02 ! NL 1.24 OV 0.98 PT 1.03 SC 1.01 ! ! ! Fit before self-cal, rms=0.091592Jy sigma=0.458931 ! Fit after self-cal, rms=0.102737Jy sigma=0.454827 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=10.19 mas, bpa=0.02573 degrees ! Estimated noise=1.94321 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273491 Jy ! Component: 100 - total flux cleaned = 9.6164e-05 Jy ! Component: 150 - total flux cleaned = 2.19199e-05 Jy ! Component: 200 - total flux cleaned = -1.22705e-05 Jy ! Total flux subtracted in 200 components = -1.22705e-05 Jy ! Clean residual min=-0.002985 max=0.003527 Jy/beam ! Clean residual mean=-0.000034 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.0940569 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.0940569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.102701Jy sigma=0.454598 ! Fit after self-cal, rms=0.103041Jy sigma=0.454320 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.103041Jy sigma=0.454320 ! Fit after self-cal, rms=0.105118Jy sigma=0.453774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.249 mas, bmaj=10.15 mas, bpa=-0.0008844 degrees ! Estimated noise=1.94484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557522 Jy ! Component: 100 - total flux cleaned = 0.000465045 Jy ! Component: 150 - total flux cleaned = 0.000437522 Jy ! Component: 200 - total flux cleaned = 0.000437068 Jy ! Total flux subtracted in 200 components = 0.000437068 Jy ! Clean residual min=-0.003018 max=0.003388 Jy/beam ! Clean residual mean=-0.000038 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.0944939 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.0944939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105100Jy sigma=0.453644 ! Fit after self-cal, rms=0.105130Jy sigma=0.453622 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.01962e-05 Jy ! Component: 100 - total flux cleaned = -3.09465e-05 Jy ! Component: 150 - total flux cleaned = -3.28345e-05 Jy ! Component: 200 - total flux cleaned = -3.30175e-05 Jy ! Total flux subtracted in 200 components = -3.30175e-05 Jy ! Clean residual min=-0.003036 max=0.003325 Jy/beam ! Clean residual mean=-0.000037 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.0944609 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.0944609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105118Jy sigma=0.453548 ! Fit after self-cal, rms=0.105109Jy sigma=0.453545 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105109Jy sigma=0.453545 ! Fit after self-cal, rms=0.105759Jy sigma=0.453311 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=10.11 mas, bpa=-0.08078 degrees ! Estimated noise=1.93919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234011 Jy ! Component: 100 - total flux cleaned = 0.000259155 Jy ! Component: 150 - total flux cleaned = 0.00028215 Jy ! Component: 200 - total flux cleaned = 0.000282763 Jy ! Total flux subtracted in 200 components = 0.000282763 Jy ! Clean residual min=-0.003300 max=0.003304 Jy/beam ! Clean residual mean=-0.000044 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.0947437 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.0947437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105747Jy sigma=0.453245 ! Fit after self-cal, rms=0.105750Jy sigma=0.453228 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.01803e-05 Jy ! Component: 100 - total flux cleaned = -2.17564e-05 Jy ! Component: 150 - total flux cleaned = -4.13451e-05 Jy ! Component: 200 - total flux cleaned = -4.10793e-05 Jy ! Total flux subtracted in 200 components = -4.10793e-05 Jy ! Clean residual min=-0.003300 max=0.003297 Jy/beam ! Clean residual mean=-0.000044 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.0947026 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.0947026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105742Jy sigma=0.453187 ! Fit after self-cal, rms=0.105738Jy sigma=0.453186 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105738Jy sigma=0.453186 ! Fit after self-cal, rms=0.105642Jy sigma=0.453169 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.574 mas, bmaj=33.92 mas, bpa=-1.445 degrees ! Estimated noise=2.32537 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000454541 Jy ! Component: 100 - total flux cleaned = 0.000455759 Jy ! Component: 150 - total flux cleaned = 0.000465726 Jy ! Component: 200 - total flux cleaned = 0.000474712 Jy ! Total flux subtracted in 200 components = 0.000474712 Jy ! Clean residual min=-0.003879 max=0.003108 Jy/beam ! Clean residual mean=-0.000072 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.0951773 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 46 components and 0.0951773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105644Jy sigma=0.453210 ! Fit after self-cal, rms=0.105641Jy sigma=0.453195 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.45929e-05 Jy ! Component: 100 - total flux cleaned = 4.39251e-05 Jy ! Component: 150 - total flux cleaned = 4.35295e-05 Jy ! Component: 200 - total flux cleaned = 4.32544e-05 Jy ! Total flux subtracted in 200 components = 4.32544e-05 Jy ! Clean residual min=-0.003872 max=0.003087 Jy/beam ! Clean residual mean=-0.000072 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.0952206 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 47 components and 0.0952206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105643Jy sigma=0.453237 ! Fit after self-cal, rms=0.105639Jy sigma=0.453226 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=10.07 mas, bpa=-0.1981 degrees ! Estimated noise=1.93592 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.224 x 10.07 at -0.1981 degrees (North through East) ! Clean map min=-0.0031952 max=0.090393 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.43 mas, bmaj=8.258 mas, bpa=-0.5012 degrees ! Estimated noise=3.44215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0695364 Jy ! Component: 100 - total flux cleaned = 0.0854999 Jy ! Component: 150 - total flux cleaned = 0.0920644 Jy ! Component: 200 - total flux cleaned = 0.0946015 Jy ! Total flux subtracted in 200 components = 0.0946015 Jy ! Clean residual min=-0.006913 max=0.007805 Jy/beam ! Clean residual mean=-0.000023 rms=0.001982 Jy/beam ! Combined flux in latest and established models = 0.0946015 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0946015 Jy ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=10.07 mas, bpa=-0.1981 degrees ! Estimated noise=1.93592 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308066 Jy ! Component: 100 - total flux cleaned = 0.000354467 Jy ! Component: 150 - total flux cleaned = 0.000356759 Jy ! Component: 200 - total flux cleaned = 0.000356128 Jy ! Total flux subtracted in 200 components = 0.000356128 Jy ! Clean residual min=-0.003372 max=0.003309 Jy/beam ! Clean residual mean=-0.000043 rms=0.000811 Jy/beam ! Combined flux in latest and established models = 0.0949576 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.0949576 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.574 mas, bmaj=33.92 mas, bpa=-1.445 degrees ! Estimated noise=2.32537 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217313 Jy ! Component: 100 - total flux cleaned = 0.000215928 Jy ! Component: 150 - total flux cleaned = 0.00021583 Jy ! Component: 200 - total flux cleaned = 0.000226824 Jy ! Total flux subtracted in 200 components = 0.000226824 Jy ! Clean residual min=-0.003866 max=0.003120 Jy/beam ! Clean residual mean=-0.000072 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.0951845 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.041e-05 Jy ! Component: 100 - total flux cleaned = 2.03981e-05 Jy ! Component: 150 - total flux cleaned = 3.0464e-05 Jy ! Component: 200 - total flux cleaned = 4.93107e-05 Jy ! Total flux subtracted in 200 components = 4.93107e-05 Jy ! Clean residual min=-0.003858 max=0.003110 Jy/beam ! Clean residual mean=-0.000072 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.0952338 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 37 components and 0.0952338 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=10.07 mas, bpa=-0.1981 degrees ! Estimated noise=1.93592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135104 Jy ! Component: 100 - total flux cleaned = -0.000198938 Jy ! Component: 150 - total flux cleaned = -0.000197879 Jy ! Component: 200 - total flux cleaned = -0.000199541 Jy ! Total flux subtracted in 200 components = -0.000199541 Jy ! Clean residual min=-0.003314 max=0.003257 Jy/beam ! Clean residual mean=-0.000043 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.0950342 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0950342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.105665Jy sigma=0.453346 ! Fit after self-cal, rms=0.105671Jy sigma=0.453335 wmodel J2351-4259_S_map.mod ! Writing 43 model components to file: J2351-4259_S_map.mod wobs J2351-4259_S_uvs.fits ! Writing UV FITS file: J2351-4259_S_uvs.fits wwins J2351-4259_S_map.win ! wwins: Wrote 1 windows to J2351-4259_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.64753e-05 Jy ! Component: 100 - total flux cleaned = 0.000348086 Jy ! Component: 150 - total flux cleaned = 0.000582025 Jy ! Component: 200 - total flux cleaned = 0.000849068 Jy ! Component: 250 - total flux cleaned = 0.000935418 Jy ! Component: 300 - total flux cleaned = 0.000977019 Jy ! Component: 350 - total flux cleaned = 0.000898511 Jy ! Component: 400 - total flux cleaned = 0.000672636 Jy ! Component: 450 - total flux cleaned = 0.000490312 Jy ! Component: 500 - total flux cleaned = 0.000241587 Jy ! Component: 550 - total flux cleaned = -3.37401e-05 Jy ! Component: 600 - total flux cleaned = 3.32054e-05 Jy ! Component: 650 - total flux cleaned = -9.84699e-05 Jy ! Component: 700 - total flux cleaned = -9.97033e-05 Jy ! Component: 750 - total flux cleaned = -0.000100473 Jy ! Component: 800 - total flux cleaned = -0.00019174 Jy ! Component: 850 - total flux cleaned = -0.000310481 Jy ! Component: 900 - total flux cleaned = -0.000338978 Jy ! Component: 950 - total flux cleaned = -0.000254166 Jy ! Component: 1000 - total flux cleaned = -0.000282361 Jy ! Component: 1050 - total flux cleaned = -0.000282495 Jy ! Component: 1100 - total flux cleaned = -0.000362525 Jy ! Component: 1150 - total flux cleaned = -0.000309771 Jy ! Component: 1200 - total flux cleaned = -0.00046411 Jy ! Component: 1250 - total flux cleaned = -0.000438989 Jy ! Component: 1300 - total flux cleaned = -0.000489027 Jy ! Component: 1350 - total flux cleaned = -0.000514021 Jy ! Component: 1400 - total flux cleaned = -0.000561629 Jy ! Component: 1450 - total flux cleaned = -0.000490416 Jy ! Component: 1500 - total flux cleaned = -0.000396993 Jy ! Component: 1550 - total flux cleaned = -0.000351213 Jy ! Component: 1600 - total flux cleaned = -0.000283395 Jy ! Component: 1650 - total flux cleaned = -0.000261105 Jy ! Component: 1700 - total flux cleaned = -0.000239492 Jy ! Component: 1750 - total flux cleaned = -0.000152765 Jy ! Component: 1800 - total flux cleaned = -0.000131379 Jy ! Component: 1850 - total flux cleaned = -6.79794e-05 Jy ! Component: 1900 - total flux cleaned = -2.63028e-05 Jy ! Component: 1950 - total flux cleaned = 1.53406e-05 Jy ! Component: 2000 - total flux cleaned = 0.000117685 Jy ! Component: 2050 - total flux cleaned = 0.000198562 Jy ! Component: 2100 - total flux cleaned = 0.000258416 Jy ! Component: 2150 - total flux cleaned = 0.000297877 Jy ! Component: 2200 - total flux cleaned = 0.000317443 Jy ! Component: 2250 - total flux cleaned = 0.000375412 Jy ! Component: 2300 - total flux cleaned = 0.000337096 Jy ! Component: 2350 - total flux cleaned = 0.000356285 Jy ! Component: 2400 - total flux cleaned = 0.000412548 Jy ! Component: 2450 - total flux cleaned = 0.000412497 Jy ! Component: 2500 - total flux cleaned = 0.000412629 Jy ! Component: 2550 - total flux cleaned = 0.00044883 Jy ! Component: 2600 - total flux cleaned = 0.000394874 Jy ! Component: 2650 - total flux cleaned = 0.000448599 Jy ! Component: 2700 - total flux cleaned = 0.00044865 Jy ! Component: 2750 - total flux cleaned = 0.00046625 Jy ! Component: 2800 - total flux cleaned = 0.000501091 Jy ! Component: 2850 - total flux cleaned = 0.000535634 Jy ! Component: 2900 - total flux cleaned = 0.000570154 Jy ! Component: 2950 - total flux cleaned = 0.000638413 Jy ! Component: 3000 - total flux cleaned = 0.000739988 Jy ! Component: 3050 - total flux cleaned = 0.000756785 Jy ! Component: 3100 - total flux cleaned = 0.000806962 Jy ! Component: 3150 - total flux cleaned = 0.00087338 Jy ! Component: 3200 - total flux cleaned = 0.00093935 Jy ! Component: 3250 - total flux cleaned = 0.00100479 Jy ! Component: 3300 - total flux cleaned = 0.00108615 Jy ! Component: 3350 - total flux cleaned = 0.00115077 Jy ! Component: 3400 - total flux cleaned = 0.0012309 Jy ! Component: 3450 - total flux cleaned = 0.00124688 Jy ! Component: 3500 - total flux cleaned = 0.00131046 Jy ! Component: 3550 - total flux cleaned = 0.00138941 Jy ! Component: 3600 - total flux cleaned = 0.00140519 Jy ! Component: 3650 - total flux cleaned = 0.0014363 Jy ! Component: 3700 - total flux cleaned = 0.00149851 Jy ! Component: 3750 - total flux cleaned = 0.00151397 Jy ! Component: 3800 - total flux cleaned = 0.00156014 Jy ! Component: 3850 - total flux cleaned = 0.00159065 Jy ! Component: 3900 - total flux cleaned = 0.00168186 Jy ! Component: 3950 - total flux cleaned = 0.00172723 Jy ! Component: 4000 - total flux cleaned = 0.00178741 Jy ! Component: 4050 - total flux cleaned = 0.00180245 Jy ! Total flux subtracted in 4096 components = 0.00181739 Jy ! Clean residual min=-0.000815 max=0.000789 Jy/beam ! Clean residual mean=-0.000004 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.0968516 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 288 components and 0.0968516 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2351-4259_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.224 x 10.07 at -0.1981 degrees (North through East) ! Clean map min=-0.0020212 max=0.089583 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2351-4259_S_map.fits wmodel /image_prod/ug002_uva//J2351-4259_S_map.mod ! Writing 288 model components to file: /image_prod/ug002_uva//J2351-4259_S_map.mod wobs /image_prod/ug002_uva//J2351-4259_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2351-4259_S_uvs.fits wwins /image_prod/ug002_uva//J2351-4259_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J2351-4259_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0895827 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000263589 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.882723 0.882723 1.76545 3.53089 7.06178 14.1236 28.2471 56.4943 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.089 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 339.857 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2351-4259_S_dfm.log closed on Thu Mar 5 06:28:32 2020