! Started logfile: /image_prod/ug002_uva//J2348-1631_X_dfm.log on Thu Mar 5 06:26:47 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2348-1631_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2348-1631_X_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.981871 visibilities/baseline/integration-bin. ! Found source: J2348-1631 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 40296 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2348-1631_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.927128Jy sigma=7.752306 ! Fit after self-cal, rms=0.701644Jy sigma=2.637353 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5946 mas, bmaj=1.544 mas, bpa=-1.601 degrees ! Estimated noise=1.92439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.12031 Jy ! Component: 100 - total flux cleaned = 1.39932 Jy ! Total flux subtracted in 100 components = 1.39932 Jy ! Clean residual min=-0.073570 max=0.136782 Jy/beam ! Clean residual mean=-0.000020 rms=0.013622 Jy/beam ! Combined flux in latest and established models = 1.39932 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.39932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.405123Jy sigma=1.474109 ! Fit after self-cal, rms=0.404604Jy sigma=1.473356 ! Inverting map ! Added new window around map position (0.6, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155083 Jy ! Component: 100 - total flux cleaned = 0.247499 Jy ! Total flux subtracted in 100 components = 0.247499 Jy ! Clean residual min=-0.047225 max=0.088077 Jy/beam ! Clean residual mean=-0.000008 rms=0.009448 Jy/beam ! Combined flux in latest and established models = 1.64682 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 1.64682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.273104Jy sigma=1.005636 ! Fit after self-cal, rms=0.271923Jy sigma=1.000616 ! Inverting map ! Added new window around map position (1.6, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0814343 Jy ! Component: 100 - total flux cleaned = 0.131694 Jy ! Total flux subtracted in 100 components = 0.131694 Jy ! Clean residual min=-0.039366 max=0.061519 Jy/beam ! Clean residual mean=0.000000 rms=0.007715 Jy/beam ! Combined flux in latest and established models = 1.77851 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 1.77851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.217860Jy sigma=0.814152 ! Fit after self-cal, rms=0.216159Jy sigma=0.803300 ! Inverting map ! Added new window around map position (-1.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0509415 Jy ! Component: 100 - total flux cleaned = 0.0881705 Jy ! Total flux subtracted in 100 components = 0.0881705 Jy ! Clean residual min=-0.034018 max=0.038634 Jy/beam ! Clean residual mean=0.000006 rms=0.006594 Jy/beam ! Combined flux in latest and established models = 1.86668 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 1.86668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189060Jy sigma=0.711025 ! Fit after self-cal, rms=0.188779Jy sigma=0.710059 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.776 mas, bmaj=1.86 mas, bpa=-0.5722 degrees ! Estimated noise=0.882834 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0578628 Jy ! Component: 100 - total flux cleaned = 0.097779 Jy ! Component: 150 - total flux cleaned = 0.127113 Jy ! Component: 200 - total flux cleaned = 0.149433 Jy ! Total flux subtracted in 200 components = 0.149433 Jy ! Clean residual min=-0.032106 max=0.045364 Jy/beam ! Clean residual mean=0.000050 rms=0.007856 Jy/beam ! Combined flux in latest and established models = 2.01612 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 47 components and 2.01612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158840Jy sigma=0.621365 ! Fit after self-cal, rms=0.158592Jy sigma=0.618805 ! Inverting map ! Added new window around map position (3, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416813 Jy ! Component: 100 - total flux cleaned = 0.0633716 Jy ! Component: 150 - total flux cleaned = 0.0799741 Jy ! Component: 200 - total flux cleaned = 0.0900413 Jy ! Total flux subtracted in 200 components = 0.0900413 Jy ! Clean residual min=-0.029305 max=0.031065 Jy/beam ! Clean residual mean=0.000046 rms=0.006981 Jy/beam ! Combined flux in latest and established models = 2.10616 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 75 components and 2.10616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.144723Jy sigma=0.570256 ! Fit after self-cal, rms=0.143872Jy sigma=0.566206 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.776 x 1.86 at -0.5722 degrees (North through East) ! Clean map min=-0.025551 max=1.5242 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.99 KP 1.06 ! LA 0.98 MK 1.00 NL 1.05 OV 1.00 ! PT 0.90 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.02 KP 1.06 ! LA 0.97 MK 1.00 NL 1.05 OV 0.99 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.03 KP 1.05 ! LA 0.99 MK 0.96 NL 1.06 OV 1.00 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 KP 1.05 ! LA 0.99 MK 0.99 NL 1.04 OV 1.01 ! PT 0.89 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.01 KP 1.07 ! LA 0.99 MK 1.00 NL 1.04 OV 1.01 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.02 KP 1.06 ! LA 0.99 MK 1.01 NL 1.04 OV 0.99 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.05 KP 1.06 ! LA 0.99 MK 1.00 NL 1.05 OV 1.00 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.03 KP 1.05 ! LA 1.00 MK 1.01 NL 1.06 OV 1.00 ! PT 0.89 SC 1.02 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.04 KP 1.07 ! LA 0.99 MK 1.00 NL 1.04 OV 1.01 ! PT 0.91 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 1.05 KP 1.05 ! LA 0.99 MK 1.00 NL 1.06 OV 1.01 ! PT 0.90 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.04 KP 1.07 ! LA 1.00 MK 1.03 NL 1.04 OV 1.02 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.07 KP 1.06 ! LA 0.99 MK 1.04 NL 1.06 OV 1.04 ! PT 0.89 SC 1.02 ! ! ! Fit before self-cal, rms=0.143872Jy sigma=0.566206 ! Fit after self-cal, rms=0.100391Jy sigma=0.409426 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7785 mas, bmaj=1.861 mas, bpa=-0.3794 degrees ! Estimated noise=0.882009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0185767 Jy ! Component: 100 - total flux cleaned = -0.0236404 Jy ! Component: 150 - total flux cleaned = -0.0257258 Jy ! Component: 200 - total flux cleaned = -0.0268321 Jy ! Total flux subtracted in 200 components = -0.0268321 Jy ! Clean residual min=-0.016925 max=0.018117 Jy/beam ! Clean residual mean=0.000004 rms=0.003801 Jy/beam ! Combined flux in latest and established models = 2.07933 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 2.07933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095571Jy sigma=0.389506 ! Fit after self-cal, rms=0.095385Jy sigma=0.388953 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095385Jy sigma=0.388953 ! Fit after self-cal, rms=0.083072Jy sigma=0.335574 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7778 mas, bmaj=1.861 mas, bpa=-0.5018 degrees ! Estimated noise=0.880262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0132381 Jy ! Component: 100 - total flux cleaned = -0.0168618 Jy ! Component: 150 - total flux cleaned = -0.0176884 Jy ! Component: 200 - total flux cleaned = -0.0179119 Jy ! Total flux subtracted in 200 components = -0.0179119 Jy ! Clean residual min=-0.012253 max=0.009756 Jy/beam ! Clean residual mean=-0.000013 rms=0.002334 Jy/beam ! Combined flux in latest and established models = 2.06141 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 107 components and 2.06141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080062Jy sigma=0.324198 ! Fit after self-cal, rms=0.080016Jy sigma=0.323956 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000480402 Jy ! Component: 100 - total flux cleaned = 0.000488996 Jy ! Component: 150 - total flux cleaned = 0.000483061 Jy ! Component: 200 - total flux cleaned = 1.67129e-05 Jy ! Total flux subtracted in 200 components = 1.67129e-05 Jy ! Clean residual min=-0.011699 max=0.009129 Jy/beam ! Clean residual mean=-0.000013 rms=0.002268 Jy/beam ! Combined flux in latest and established models = 2.06143 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 115 components and 2.06143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079241Jy sigma=0.321219 ! Fit after self-cal, rms=0.079225Jy sigma=0.321118 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079225Jy sigma=0.321118 ! Fit after self-cal, rms=0.077788Jy sigma=0.316329 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7769 mas, bmaj=1.861 mas, bpa=-0.4939 degrees ! Estimated noise=0.879301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00960641 Jy ! Component: 100 - total flux cleaned = -0.0112114 Jy ! Component: 150 - total flux cleaned = -0.0117685 Jy ! Component: 200 - total flux cleaned = -0.012069 Jy ! Total flux subtracted in 200 components = -0.012069 Jy ! Clean residual min=-0.009997 max=0.007691 Jy/beam ! Clean residual mean=-0.000010 rms=0.001950 Jy/beam ! Combined flux in latest and established models = 2.04936 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 2.04936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076163Jy sigma=0.310132 ! Fit after self-cal, rms=0.076140Jy sigma=0.309999 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000260317 Jy ! Component: 100 - total flux cleaned = -0.000148235 Jy ! Component: 150 - total flux cleaned = -0.000521578 Jy ! Component: 200 - total flux cleaned = -0.000869222 Jy ! Total flux subtracted in 200 components = -0.000869222 Jy ! Clean residual min=-0.009665 max=0.007394 Jy/beam ! Clean residual mean=-0.000010 rms=0.001909 Jy/beam ! Combined flux in latest and established models = 2.04849 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 127 components and 2.04849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075726Jy sigma=0.308517 ! Fit after self-cal, rms=0.075710Jy sigma=0.308451 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075710Jy sigma=0.308451 ! Fit after self-cal, rms=0.074794Jy sigma=0.305643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.001 mas, bmaj=3.951 mas, bpa=5.674 degrees ! Estimated noise=1.31892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00954486 Jy ! Component: 100 - total flux cleaned = -0.0102462 Jy ! Component: 150 - total flux cleaned = -0.0107501 Jy ! Component: 200 - total flux cleaned = -0.0110073 Jy ! Total flux subtracted in 200 components = -0.0110073 Jy ! Clean residual min=-0.013594 max=0.010287 Jy/beam ! Clean residual mean=-0.000017 rms=0.003025 Jy/beam ! Combined flux in latest and established models = 2.03749 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 2.03749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074318Jy sigma=0.304741 ! Fit after self-cal, rms=0.074310Jy sigma=0.304451 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.89538e-05 Jy ! Component: 100 - total flux cleaned = -8.65613e-05 Jy ! Component: 150 - total flux cleaned = -9.47163e-05 Jy ! Component: 200 - total flux cleaned = -0.000164667 Jy ! Total flux subtracted in 200 components = -0.000164667 Jy ! Clean residual min=-0.013240 max=0.010548 Jy/beam ! Clean residual mean=-0.000018 rms=0.002993 Jy/beam ! Combined flux in latest and established models = 2.03732 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 141 components and 2.03732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074289Jy sigma=0.304650 ! Fit after self-cal, rms=0.074287Jy sigma=0.304548 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7763 mas, bmaj=1.86 mas, bpa=-0.4778 degrees ! Estimated noise=0.878553 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7763 x 1.86 at -0.4778 degrees (North through East) ! Clean map min=-0.0071294 max=1.5249 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074287Jy sigma=0.304548 ! Fit after self-cal, rms=0.068471Jy sigma=0.271578 ! Inverting map and beam ! Estimated beam: bmin=0.7767 mas, bmaj=1.861 mas, bpa=-0.3839 degrees ! Estimated noise=0.878962 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00673191 Jy ! Component: 100 - total flux cleaned = -0.00778418 Jy ! Component: 150 - total flux cleaned = -0.00792051 Jy ! Component: 200 - total flux cleaned = -0.00816668 Jy ! Total flux subtracted in 200 components = -0.00816668 Jy ! Clean residual min=-0.007002 max=0.006349 Jy/beam ! Clean residual mean=-0.000005 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 2.02916 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 147 components and 2.02916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067591Jy sigma=0.267683 ! Fit after self-cal, rms=0.067553Jy sigma=0.267594 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334435 Jy ! Component: 100 - total flux cleaned = 0.000329326 Jy ! Component: 150 - total flux cleaned = 0.000227461 Jy ! Component: 200 - total flux cleaned = 3.90149e-05 Jy ! Total flux subtracted in 200 components = 3.90149e-05 Jy ! Clean residual min=-0.006695 max=0.006086 Jy/beam ! Clean residual mean=-0.000005 rms=0.001496 Jy/beam ! Combined flux in latest and established models = 2.0292 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 156 components and 2.0292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067276Jy sigma=0.266375 ! Fit after self-cal, rms=0.067256Jy sigma=0.266318 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067256Jy sigma=0.266318 ! Fit after self-cal, rms=0.066731Jy sigma=0.265041 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5956 mas, bmaj=1.543 mas, bpa=-1.317 degrees ! Estimated noise=1.92112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.11681 Jy ! Component: 100 - total flux cleaned = 1.40211 Jy ! Component: 150 - total flux cleaned = 1.55794 Jy ! Component: 200 - total flux cleaned = 1.65394 Jy ! Total flux subtracted in 200 components = 1.65394 Jy ! Clean residual min=-0.031301 max=0.053290 Jy/beam ! Clean residual mean=-0.000014 rms=0.006003 Jy/beam ! Combined flux in latest and established models = 1.65394 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.65394 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7764 mas, bmaj=1.86 mas, bpa=-0.3698 degrees ! Estimated noise=0.878279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.112876 Jy ! Component: 100 - total flux cleaned = 0.180077 Jy ! Component: 150 - total flux cleaned = 0.226049 Jy ! Component: 200 - total flux cleaned = 0.258892 Jy ! Total flux subtracted in 200 components = 0.258892 Jy ! Clean residual min=-0.010320 max=0.019018 Jy/beam ! Clean residual mean=-0.000004 rms=0.003219 Jy/beam ! Combined flux in latest and established models = 1.91283 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 34 components and 1.91283 Jy ! Inverting map ! Added new window around map position (-0.6, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247192 Jy ! Component: 100 - total flux cleaned = 0.0438663 Jy ! Component: 150 - total flux cleaned = 0.0588717 Jy ! Component: 200 - total flux cleaned = 0.0707404 Jy ! Total flux subtracted in 200 components = 0.0707404 Jy ! Clean residual min=-0.007068 max=0.008541 Jy/beam ! Clean residual mean=-0.000004 rms=0.001799 Jy/beam ! Combined flux in latest and established models = 1.98357 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 57 components and 1.98357 Jy ! Inverting map ! Added new window around map position (-7.4, 13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00979624 Jy ! Component: 100 - total flux cleaned = 0.0176157 Jy ! Component: 150 - total flux cleaned = 0.0233388 Jy ! Component: 200 - total flux cleaned = 0.0270938 Jy ! Total flux subtracted in 200 components = 0.0270938 Jy ! Clean residual min=-0.006592 max=0.006512 Jy/beam ! Clean residual mean=-0.000004 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 2.01066 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 81 components and 2.01066 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.004 mas, bmaj=3.952 mas, bpa=5.792 degrees ! Estimated noise=1.3178 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789256 Jy ! Component: 100 - total flux cleaned = 0.0102803 Jy ! Component: 150 - total flux cleaned = 0.0110382 Jy ! Component: 200 - total flux cleaned = 0.0119077 Jy ! Total flux subtracted in 200 components = 0.0119077 Jy ! Clean residual min=-0.008819 max=0.008383 Jy/beam ! Clean residual mean=-0.000010 rms=0.002386 Jy/beam ! Combined flux in latest and established models = 2.02257 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532013 Jy ! Component: 100 - total flux cleaned = 0.00100046 Jy ! Component: 150 - total flux cleaned = 0.00132762 Jy ! Component: 200 - total flux cleaned = 0.00155088 Jy ! Total flux subtracted in 200 components = 0.00155088 Jy ! Clean residual min=-0.008832 max=0.008323 Jy/beam ! Clean residual mean=-0.000010 rms=0.002339 Jy/beam ! Combined flux in latest and established models = 2.02412 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 111 components and 2.02412 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7764 mas, bmaj=1.86 mas, bpa=-0.3698 degrees ! Estimated noise=0.878279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107375 Jy ! Component: 100 - total flux cleaned = -0.00169959 Jy ! Component: 150 - total flux cleaned = -0.00156314 Jy ! Component: 200 - total flux cleaned = -0.00156312 Jy ! Total flux subtracted in 200 components = -0.00156312 Jy ! Clean residual min=-0.005562 max=0.005899 Jy/beam ! Clean residual mean=-0.000004 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 2.02256 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 129 components and 2.02256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065664Jy sigma=0.261489 ! Fit after self-cal, rms=0.065481Jy sigma=0.260641 wmodel J2348-1631_X_map.mod ! Writing 129 model components to file: J2348-1631_X_map.mod wobs J2348-1631_X_uvs.fits ! Writing UV FITS file: J2348-1631_X_uvs.fits wwins J2348-1631_X_map.win ! wwins: Wrote 7 windows to J2348-1631_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000926745 Jy ! Component: 100 - total flux cleaned = -0.000844517 Jy ! Component: 150 - total flux cleaned = -0.000235017 Jy ! Component: 200 - total flux cleaned = 0.000182628 Jy ! Component: 250 - total flux cleaned = 0.000584672 Jy ! Component: 300 - total flux cleaned = 0.000894848 Jy ! Component: 350 - total flux cleaned = 0.00119324 Jy ! Component: 400 - total flux cleaned = 0.0012663 Jy ! Component: 450 - total flux cleaned = 0.00169432 Jy ! Component: 500 - total flux cleaned = 0.00183379 Jy ! Component: 550 - total flux cleaned = 0.00203936 Jy ! Component: 600 - total flux cleaned = 0.00223877 Jy ! Component: 650 - total flux cleaned = 0.0024322 Jy ! Component: 700 - total flux cleaned = 0.00261911 Jy ! Component: 750 - total flux cleaned = 0.0025556 Jy ! Component: 800 - total flux cleaned = 0.00255666 Jy ! Component: 850 - total flux cleaned = 0.00255763 Jy ! Component: 900 - total flux cleaned = 0.00267507 Jy ! Component: 950 - total flux cleaned = 0.00278921 Jy ! Component: 1000 - total flux cleaned = 0.00278888 Jy ! Component: 1050 - total flux cleaned = 0.00284413 Jy ! Component: 1100 - total flux cleaned = 0.00268394 Jy ! Component: 1150 - total flux cleaned = 0.00284505 Jy ! Component: 1200 - total flux cleaned = 0.00268819 Jy ! Component: 1250 - total flux cleaned = 0.0028429 Jy ! Component: 1300 - total flux cleaned = 0.0027911 Jy ! Component: 1350 - total flux cleaned = 0.00274186 Jy ! Component: 1400 - total flux cleaned = 0.00274171 Jy ! Component: 1450 - total flux cleaned = 0.00288562 Jy ! Component: 1500 - total flux cleaned = 0.00283853 Jy ! Component: 1550 - total flux cleaned = 0.00274409 Jy ! Component: 1600 - total flux cleaned = 0.00283742 Jy ! Component: 1650 - total flux cleaned = 0.00274646 Jy ! Component: 1700 - total flux cleaned = 0.00283725 Jy ! Component: 1750 - total flux cleaned = 0.00297106 Jy ! Component: 1800 - total flux cleaned = 0.00297121 Jy ! Component: 1850 - total flux cleaned = 0.00314338 Jy ! Component: 1900 - total flux cleaned = 0.00310046 Jy ! Component: 1950 - total flux cleaned = 0.0031842 Jy ! Component: 2000 - total flux cleaned = 0.0032659 Jy ! Component: 2050 - total flux cleaned = 0.00334703 Jy ! Component: 2100 - total flux cleaned = 0.00322672 Jy ! Component: 2150 - total flux cleaned = 0.0032662 Jy ! Component: 2200 - total flux cleaned = 0.00338355 Jy ! Component: 2250 - total flux cleaned = 0.0032687 Jy ! Component: 2300 - total flux cleaned = 0.00330749 Jy ! Component: 2350 - total flux cleaned = 0.00338204 Jy ! Component: 2400 - total flux cleaned = 0.0035309 Jy ! Component: 2450 - total flux cleaned = 0.00342074 Jy ! Component: 2500 - total flux cleaned = 0.00352922 Jy ! Component: 2550 - total flux cleaned = 0.00352895 Jy ! Component: 2600 - total flux cleaned = 0.00356375 Jy ! Component: 2650 - total flux cleaned = 0.00352849 Jy ! Component: 2700 - total flux cleaned = 0.00370051 Jy ! Component: 2750 - total flux cleaned = 0.00366563 Jy ! Component: 2800 - total flux cleaned = 0.00366485 Jy ! Component: 2850 - total flux cleaned = 0.00363184 Jy ! Component: 2900 - total flux cleaned = 0.003632 Jy ! Component: 2950 - total flux cleaned = 0.00366479 Jy ! Component: 3000 - total flux cleaned = 0.0037943 Jy ! Component: 3050 - total flux cleaned = 0.00373112 Jy ! Component: 3100 - total flux cleaned = 0.00385739 Jy ! Component: 3150 - total flux cleaned = 0.00398186 Jy ! Component: 3200 - total flux cleaned = 0.00404313 Jy ! Component: 3250 - total flux cleaned = 0.00413411 Jy ! Component: 3300 - total flux cleaned = 0.00410427 Jy ! Component: 3350 - total flux cleaned = 0.00413435 Jy ! Component: 3400 - total flux cleaned = 0.00425189 Jy ! Component: 3450 - total flux cleaned = 0.00433927 Jy ! Component: 3500 - total flux cleaned = 0.00433902 Jy ! Component: 3550 - total flux cleaned = 0.00431024 Jy ! Component: 3600 - total flux cleaned = 0.0043377 Jy ! Component: 3650 - total flux cleaned = 0.00433789 Jy ! Component: 3700 - total flux cleaned = 0.00433776 Jy ! Component: 3750 - total flux cleaned = 0.00425609 Jy ! Component: 3800 - total flux cleaned = 0.00436479 Jy ! Component: 3850 - total flux cleaned = 0.00433781 Jy ! Component: 3900 - total flux cleaned = 0.00439074 Jy ! Component: 3950 - total flux cleaned = 0.00441735 Jy ! Component: 4000 - total flux cleaned = 0.00444331 Jy ! Component: 4050 - total flux cleaned = 0.0043915 Jy ! Total flux subtracted in 4096 components = 0.00441723 Jy ! Clean residual min=-0.001388 max=0.001364 Jy/beam ! Clean residual mean=-0.000002 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 2.02697 Jy keep ! Adding 394 model components to the UV plane model. ! The established model now contains 523 components and 2.02697 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2348-1631_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7764 x 1.86 at -0.3698 degrees (North through East) ! Clean map min=-0.0041855 max=1.5308 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2348-1631_X_map.fits wmodel /image_prod/ug002_uva//J2348-1631_X_map.mod ! Writing 523 model components to file: /image_prod/ug002_uva//J2348-1631_X_map.mod wobs /image_prod/ug002_uva//J2348-1631_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2348-1631_X_uvs.fits wwins /image_prod/ug002_uva//J2348-1631_X_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J2348-1631_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.53085 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000476805 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0934394 0.0934394 0.186879 0.373757 0.747515 1.49503 2.99006 5.98012 11.9602 23.9205 47.841 95.6819 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.53 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3210.64 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2348-1631_X_dfm.log closed on Thu Mar 5 06:26:53 2020