! Started logfile: /image_prod/ug002_uva//J2343+1543_S_dfm.log on Thu Mar  5 06:23:48 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2343+1543_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2343+1543_S_uva.fits
! AN table 1: 100 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.766667 visibilities/baseline/integration-bin.
! Found source: J2343+1543
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 10350 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2343+1543_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 135 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.025717Jy  sigma=8.998520
! Fit after  self-cal, rms=0.810509Jy  sigma=7.231539
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.807 mas, bmaj=6.767 mas, bpa=-5.028 degrees
! Estimated noise=1.18418 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.142197 Jy
! Component: 100  -  total flux cleaned = 0.173273 Jy
! Total flux subtracted in 100 components = 0.173273 Jy
! Clean residual min=-0.010217 max=0.009316 Jy/beam
! Clean residual mean=0.000000 rms=0.002143 Jy/beam
! Combined flux in latest and established models = 0.173273 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.173273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118779Jy  sigma=0.603397
! Fit after  self-cal, rms=0.118776Jy  sigma=0.603364
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.212 mas, bmaj=7.4 mas, bpa=-3.76 degrees
! Estimated noise=0.824989 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119433 Jy
! Component: 100  -  total flux cleaned = 0.0170639 Jy
! Component: 150  -  total flux cleaned = 0.0199427 Jy
! Component: 200  -  total flux cleaned = 0.0217049 Jy
! Total flux subtracted in 200 components = 0.0217049 Jy
! Clean residual min=-0.011942 max=0.007814 Jy/beam
! Clean residual mean=0.000019 rms=0.002229 Jy/beam
! Combined flux in latest and established models = 0.194978 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 31 components and 0.194978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116431Jy  sigma=0.594282
! Fit after  self-cal, rms=0.116435Jy  sigma=0.594262
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.212 x 7.4 at -3.76 degrees (North through East)
! Clean map  min=-0.011646  max=0.18649 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.09     HN        1.04     KP        1.09     
!   LA        1.09     MK        1.04     NL        1.04     OV        0.68     
!   PT        1.12     SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.10     HN        1.02     KP        1.04     
!   LA        1.07     MK        0.99     NL        1.01     OV        0.90     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.11     HN        1.05     KP        1.08     
!   LA        1.10     MK        1.00     NL        1.02     OV        0.64     
!   PT        1.11     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.116435Jy  sigma=0.594262
! Fit after  self-cal, rms=0.106648Jy  sigma=0.503189
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.214 mas, bmaj=7.421 mas, bpa=-3.436 degrees
! Estimated noise=0.832594 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187359 Jy
! Component: 100  -  total flux cleaned = 0.00213923 Jy
! Component: 150  -  total flux cleaned = 0.00209618 Jy
! Component: 200  -  total flux cleaned = 0.00198384 Jy
! Total flux subtracted in 200 components = 0.00198384 Jy
! Clean residual min=-0.004796 max=0.004199 Jy/beam
! Clean residual mean=0.000002 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 0.196962 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 46 components and 0.196962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106408Jy  sigma=0.503160
! Fit after  self-cal, rms=0.106490Jy  sigma=0.502420
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.106490Jy  sigma=0.502420
! Fit after  self-cal, rms=0.078351Jy  sigma=0.475992
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.223 mas, bmaj=7.395 mas, bpa=-3.607 degrees
! Estimated noise=0.839403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000713471 Jy
! Component: 100  -  total flux cleaned = 0.000466026 Jy
! Component: 150  -  total flux cleaned = 0.000267559 Jy
! Component: 200  -  total flux cleaned = 0.000171322 Jy
! Total flux subtracted in 200 components = 0.000171322 Jy
! Clean residual min=-0.001902 max=0.002181 Jy/beam
! Clean residual mean=0.000003 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.197133 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.197133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078127Jy  sigma=0.475862
! Fit after  self-cal, rms=0.078119Jy  sigma=0.475772
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-75.5, -62.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167031 Jy
! Component: 100  -  total flux cleaned = 0.00176063 Jy
! Component: 150  -  total flux cleaned = 0.00166342 Jy
! Component: 200  -  total flux cleaned = 0.00172068 Jy
! Total flux subtracted in 200 components = 0.00172068 Jy
! Clean residual min=-0.001798 max=0.001939 Jy/beam
! Clean residual mean=0.000002 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.198854 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 74 components and 0.198854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078006Jy  sigma=0.475394
! Fit after  self-cal, rms=0.078002Jy  sigma=0.475365
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.078002Jy  sigma=0.475365
! Fit after  self-cal, rms=0.063702Jy  sigma=0.468507
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.224 mas, bmaj=7.407 mas, bpa=-3.627 degrees
! Estimated noise=0.8381 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000167842 Jy
! Component: 100  -  total flux cleaned = -0.000268438 Jy
! Component: 150  -  total flux cleaned = -0.000313157 Jy
! Component: 200  -  total flux cleaned = -0.000331714 Jy
! Total flux subtracted in 200 components = -0.000331714 Jy
! Clean residual min=-0.001322 max=0.001609 Jy/beam
! Clean residual mean=0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.198522 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 96 components and 0.198522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063682Jy  sigma=0.468381
! Fit after  self-cal, rms=0.063667Jy  sigma=0.468336
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (100.5, -9.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011526 Jy
! Component: 100  -  total flux cleaned = 0.00136708 Jy
! Component: 150  -  total flux cleaned = 0.00150674 Jy
! Component: 200  -  total flux cleaned = 0.00166947 Jy
! Total flux subtracted in 200 components = 0.00166947 Jy
! Clean residual min=-0.001200 max=0.001247 Jy/beam
! Clean residual mean=0.000002 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.200191 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 116 components and 0.200191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063613Jy  sigma=0.468004
! Fit after  self-cal, rms=0.063609Jy  sigma=0.467988
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063609Jy  sigma=0.467988
! Fit after  self-cal, rms=0.063520Jy  sigma=0.467927
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.086 mas, bmaj=11.32 mas, bpa=-6.838 degrees
! Estimated noise=1.02606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0001766 Jy
! Component: 100  -  total flux cleaned = -0.000251587 Jy
! Component: 150  -  total flux cleaned = -0.000252176 Jy
! Component: 200  -  total flux cleaned = -0.000218034 Jy
! Total flux subtracted in 200 components = -0.000218034 Jy
! Clean residual min=-0.001456 max=0.001386 Jy/beam
! Clean residual mean=0.000004 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.199973 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 133 components and 0.199973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063515Jy  sigma=0.467907
! Fit after  self-cal, rms=0.063515Jy  sigma=0.467905
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.03929e-05 Jy
! Component: 100  -  total flux cleaned = -3.97723e-05 Jy
! Component: 150  -  total flux cleaned = -1.01177e-05 Jy
! Component: 200  -  total flux cleaned = 1.81011e-05 Jy
! Total flux subtracted in 200 components = 1.81011e-05 Jy
! Clean residual min=-0.001445 max=0.001388 Jy/beam
! Clean residual mean=0.000004 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.199991 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 140 components and 0.199991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063512Jy  sigma=0.467897
! Fit after  self-cal, rms=0.063513Jy  sigma=0.467896
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.226 mas, bmaj=7.411 mas, bpa=-3.61 degrees
! Estimated noise=0.837422 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.226 x 7.411 at -3.61 degrees (North through East)
! Clean map  min=-0.0011286  max=0.19035 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.826 mas, bmaj=6.789 mas, bpa=-5.275 degrees
! Estimated noise=1.22404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146936 Jy
! Component: 100  -  total flux cleaned = 0.178989 Jy
! Component: 150  -  total flux cleaned = 0.18728 Jy
! Component: 200  -  total flux cleaned = 0.191459 Jy
! Total flux subtracted in 200 components = 0.191459 Jy
! Clean residual min=-0.002240 max=0.002728 Jy/beam
! Clean residual mean=0.000003 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.191459 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.191459 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.226 mas, bmaj=7.411 mas, bpa=-3.61 degrees
! Estimated noise=0.837422 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00321607 Jy
! Component: 100  -  total flux cleaned = 0.00492825 Jy
! Component: 150  -  total flux cleaned = 0.00599849 Jy
! Component: 200  -  total flux cleaned = 0.00672245 Jy
! Total flux subtracted in 200 components = 0.00672245 Jy
! Clean residual min=-0.001371 max=0.001429 Jy/beam
! Clean residual mean=0.000002 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.198182 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 68 components and 0.198182 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.086 mas, bmaj=11.32 mas, bpa=-6.838 degrees
! Estimated noise=1.02606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000812485 Jy
! Component: 100  -  total flux cleaned = 0.00101537 Jy
! Component: 150  -  total flux cleaned = 0.0011 Jy
! Component: 200  -  total flux cleaned = 0.00119812 Jy
! Total flux subtracted in 200 components = 0.00119812 Jy
! Clean residual min=-0.001471 max=0.001340 Jy/beam
! Clean residual mean=0.000004 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.19938 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152874 Jy
! Component: 100  -  total flux cleaned = 0.000289923 Jy
! Component: 150  -  total flux cleaned = 0.000396658 Jy
! Component: 200  -  total flux cleaned = 0.000445752 Jy
! Total flux subtracted in 200 components = 0.000445752 Jy
! Clean residual min=-0.001464 max=0.001370 Jy/beam
! Clean residual mean=0.000004 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.199826 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 102 components and 0.199826 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.226 mas, bmaj=7.411 mas, bpa=-3.61 degrees
! Estimated noise=0.837422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000273042 Jy
! Component: 100  -  total flux cleaned = 0.000515303 Jy
! Component: 150  -  total flux cleaned = 0.000679473 Jy
! Component: 200  -  total flux cleaned = 0.000805607 Jy
! Total flux subtracted in 200 components = 0.000805607 Jy
! Clean residual min=-0.001220 max=0.001297 Jy/beam
! Clean residual mean=0.000002 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.200631 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 121 components and 0.200631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063528Jy  sigma=0.468072
! Fit after  self-cal, rms=0.063529Jy  sigma=0.468057
wmodel J2343+1543_S_map.mod
! Writing 121 model components to file: J2343+1543_S_map.mod
wobs   J2343+1543_S_uvs.fits
! Writing UV FITS file: J2343+1543_S_uvs.fits
wwins  J2343+1543_S_map.win
! wwins: Wrote 3 windows to J2343+1543_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000314094 Jy
! Component: 100  -  total flux cleaned = 0.000270119 Jy
! Component: 150  -  total flux cleaned = 0.000142409 Jy
! Component: 200  -  total flux cleaned = 8.02115e-05 Jy
! Component: 250  -  total flux cleaned = -5.07644e-08 Jy
! Component: 300  -  total flux cleaned = -3.92614e-05 Jy
! Component: 350  -  total flux cleaned = -9.66555e-05 Jy
! Component: 400  -  total flux cleaned = -0.00020842 Jy
! Component: 450  -  total flux cleaned = -0.000299818 Jy
! Component: 500  -  total flux cleaned = -0.000425964 Jy
! Component: 550  -  total flux cleaned = -0.000479232 Jy
! Component: 600  -  total flux cleaned = -0.000584047 Jy
! Component: 650  -  total flux cleaned = -0.00063581 Jy
! Component: 700  -  total flux cleaned = -0.000686733 Jy
! Component: 750  -  total flux cleaned = -0.000786963 Jy
! Component: 800  -  total flux cleaned = -0.000786957 Jy
! Component: 850  -  total flux cleaned = -0.000868484 Jy
! Component: 900  -  total flux cleaned = -0.000852502 Jy
! Component: 950  -  total flux cleaned = -0.000963861 Jy
! Component: 1000  -  total flux cleaned = -0.000995304 Jy
! Component: 1050  -  total flux cleaned = -0.00107277 Jy
! Component: 1100  -  total flux cleaned = -0.00108817 Jy
! Component: 1150  -  total flux cleaned = -0.00113353 Jy
! Component: 1200  -  total flux cleaned = -0.00114848 Jy
! Component: 1250  -  total flux cleaned = -0.00122257 Jy
! Component: 1300  -  total flux cleaned = -0.00126642 Jy
! Component: 1350  -  total flux cleaned = -0.00128086 Jy
! Component: 1400  -  total flux cleaned = -0.00135292 Jy
! Component: 1450  -  total flux cleaned = -0.00143795 Jy
! Component: 1500  -  total flux cleaned = -0.00149429 Jy
! Component: 1550  -  total flux cleaned = -0.00150801 Jy
! Component: 1600  -  total flux cleaned = -0.00159098 Jy
! Component: 1650  -  total flux cleaned = -0.00160467 Jy
! Component: 1700  -  total flux cleaned = -0.0016859 Jy
! Component: 1750  -  total flux cleaned = -0.00172621 Jy
! Component: 1800  -  total flux cleaned = -0.00175277 Jy
! Component: 1850  -  total flux cleaned = -0.00189742 Jy
! Component: 1900  -  total flux cleaned = -0.0019365 Jy
! Component: 1950  -  total flux cleaned = -0.00202702 Jy
! Component: 2000  -  total flux cleaned = -0.00205253 Jy
! Component: 2050  -  total flux cleaned = -0.00212893 Jy
! Component: 2100  -  total flux cleaned = -0.00221714 Jy
! Component: 2150  -  total flux cleaned = -0.00231703 Jy
! Component: 2200  -  total flux cleaned = -0.00236656 Jy
! Component: 2250  -  total flux cleaned = -0.0024034 Jy
! Component: 2300  -  total flux cleaned = -0.00246421 Jy
! Component: 2350  -  total flux cleaned = -0.00248852 Jy
! Component: 2400  -  total flux cleaned = -0.00253654 Jy
! Component: 2450  -  total flux cleaned = -0.00258433 Jy
! Component: 2500  -  total flux cleaned = -0.00265525 Jy
! Component: 2550  -  total flux cleaned = -0.0027139 Jy
! Component: 2600  -  total flux cleaned = -0.00279545 Jy
! Component: 2650  -  total flux cleaned = -0.00286471 Jy
! Component: 2700  -  total flux cleaned = -0.00287624 Jy
! Component: 2750  -  total flux cleaned = -0.00293325 Jy
! Component: 2800  -  total flux cleaned = -0.00298983 Jy
! Component: 2850  -  total flux cleaned = -0.00305731 Jy
! Component: 2900  -  total flux cleaned = -0.00306853 Jy
! Component: 2950  -  total flux cleaned = -0.00311304 Jy
! Component: 3000  -  total flux cleaned = -0.00320118 Jy
! Component: 3050  -  total flux cleaned = -0.00325594 Jy
! Component: 3100  -  total flux cleaned = -0.00329953 Jy
! Component: 3150  -  total flux cleaned = -0.00337521 Jy
! Component: 3200  -  total flux cleaned = -0.00346115 Jy
! Component: 3250  -  total flux cleaned = -0.00352522 Jy
! Component: 3300  -  total flux cleaned = -0.00358895 Jy
! Component: 3350  -  total flux cleaned = -0.00365231 Jy
! Component: 3400  -  total flux cleaned = -0.00369424 Jy
! Component: 3450  -  total flux cleaned = -0.00373594 Jy
! Component: 3500  -  total flux cleaned = -0.00376696 Jy
! Component: 3550  -  total flux cleaned = -0.00382876 Jy
! Component: 3600  -  total flux cleaned = -0.00385966 Jy
! Component: 3650  -  total flux cleaned = -0.00390044 Jy
! Component: 3700  -  total flux cleaned = -0.00395106 Jy
! Component: 3750  -  total flux cleaned = -0.00398134 Jy
! Component: 3800  -  total flux cleaned = -0.0040315 Jy
! Component: 3850  -  total flux cleaned = -0.00410121 Jy
! Component: 3900  -  total flux cleaned = -0.00414088 Jy
! Component: 3950  -  total flux cleaned = -0.00414092 Jy
! Component: 4000  -  total flux cleaned = -0.00423889 Jy
! Component: 4050  -  total flux cleaned = -0.00421935 Jy
! Total flux subtracted in 4096 components = -0.00427755 Jy
! Clean residual min=-0.000670 max=0.000552 Jy/beam
! Clean residual mean=0.000000 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.196354 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 412 components and 0.196354 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2343+1543_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.226 x 7.411 at -3.61 degrees (North through East)
! Clean map  min=-0.00093761  max=0.18972 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2343+1543_S_map.fits
wmodel /image_prod/ug002_uva//J2343+1543_S_map.mod
! Writing 412 model components to file: /image_prod/ug002_uva//J2343+1543_S_map.mod
wobs   /image_prod/ug002_uva//J2343+1543_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2343+1543_S_uvs.fits
wwins  /image_prod/ug002_uva//J2343+1543_S_map.win
! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2343+1543_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.189723 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000177873 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.281263 0.281263 0.562526 1.12505 2.2501 4.5002 9.00041 18.0008 36.0016 72.0033
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.189 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1066.62 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2343+1543_S_dfm.log closed on Thu Mar  5 06:23:52 2020