! Started logfile: /image_prod/ug002_uva//J2340+2641_X_dfm.log on Thu Mar 5 06:22:45 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2340+2641_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2340+2641_X_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.976296 visibilities/baseline/integration-bin. ! Found source: J2340+2641 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 31632 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2340+2641_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.041166Jy sigma=9.325975 ! Fit after self-cal, rms=0.808360Jy sigma=7.308224 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6544 mas, bmaj=1.476 mas, bpa=-3.423 degrees ! Estimated noise=0.832694 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136496 Jy ! Component: 100 - total flux cleaned = 0.190277 Jy ! Total flux subtracted in 100 components = 0.190277 Jy ! Clean residual min=-0.017386 max=0.040349 Jy/beam ! Clean residual mean=0.000063 rms=0.004926 Jy/beam ! Combined flux in latest and established models = 0.190277 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.190277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.163076Jy sigma=1.412136 ! Fit after self-cal, rms=0.162921Jy sigma=1.411011 ! Inverting map ! Added new window around map position (-6.2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0389339 Jy ! Component: 100 - total flux cleaned = 0.0649221 Jy ! Total flux subtracted in 100 components = 0.0649221 Jy ! Clean residual min=-0.014537 max=0.040154 Jy/beam ! Clean residual mean=0.000049 rms=0.004284 Jy/beam ! Combined flux in latest and established models = 0.255199 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.255199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.144642Jy sigma=1.257307 ! Fit after self-cal, rms=0.143794Jy sigma=1.251969 ! Inverting map ! Added new window around map position (-9, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365967 Jy ! Component: 100 - total flux cleaned = 0.0587269 Jy ! Total flux subtracted in 100 components = 0.0587269 Jy ! Clean residual min=-0.012557 max=0.040163 Jy/beam ! Clean residual mean=0.000042 rms=0.003599 Jy/beam ! Combined flux in latest and established models = 0.313926 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.313926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124378Jy sigma=1.073752 ! Fit after self-cal, rms=0.122970Jy sigma=1.063228 ! Inverting map ! Added new window around map position (-7.8, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0358292 Jy ! Component: 100 - total flux cleaned = 0.057861 Jy ! Total flux subtracted in 100 components = 0.057861 Jy ! Clean residual min=-0.010762 max=0.021164 Jy/beam ! Clean residual mean=0.000035 rms=0.002730 Jy/beam ! Combined flux in latest and established models = 0.371787 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.371787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101234Jy sigma=0.864569 ! Fit after self-cal, rms=0.100162Jy sigma=0.855748 ! Inverting map ! Added new window around map position (-0.8, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216147 Jy ! Component: 100 - total flux cleaned = 0.0392111 Jy ! Total flux subtracted in 100 components = 0.0392111 Jy ! Clean residual min=-0.007903 max=0.016094 Jy/beam ! Clean residual mean=0.000026 rms=0.002260 Jy/beam ! Combined flux in latest and established models = 0.410998 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 62 components and 0.410998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088801Jy sigma=0.756673 ! Fit after self-cal, rms=0.088626Jy sigma=0.755498 ! Inverting map ! Added new window around map position (-5, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172914 Jy ! Component: 100 - total flux cleaned = 0.0318166 Jy ! Total flux subtracted in 100 components = 0.0318166 Jy ! Clean residual min=-0.006731 max=0.010379 Jy/beam ! Clean residual mean=0.000021 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 0.442815 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 0.442815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080248Jy sigma=0.682159 ! Fit after self-cal, rms=0.080152Jy sigma=0.681489 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8523 mas, bmaj=1.769 mas, bpa=-2.996 degrees ! Estimated noise=0.45067 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271109 Jy ! Component: 100 - total flux cleaned = 0.0487003 Jy ! Component: 150 - total flux cleaned = 0.0666488 Jy ! Component: 200 - total flux cleaned = 0.0817768 Jy ! Total flux subtracted in 200 components = 0.0817768 Jy ! Clean residual min=-0.006815 max=0.009833 Jy/beam ! Clean residual mean=0.000015 rms=0.002182 Jy/beam ! Combined flux in latest and established models = 0.524592 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 131 components and 0.524592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063160Jy sigma=0.534484 ! Fit after self-cal, rms=0.062837Jy sigma=0.531396 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8523 x 1.769 at -2.996 degrees (North through East) ! Clean map min=-0.0067695 max=0.20297 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.02 KP 0.97 ! LA 0.95 MK 1.03 OV 0.91 PT 0.86 ! SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.04 KP 0.97 ! LA 0.95 MK 1.01 OV 0.91 PT 0.85 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.03 KP 0.97 ! LA 0.96 MK 1.02 OV 0.91 PT 0.87 ! SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.01 KP 0.97 ! LA 0.95 MK 1.05 OV 0.93 PT 0.87 ! SC 1.06 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.03 KP 0.98 ! LA 0.97 MK 1.06 OV 0.93 PT 0.86 ! SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.03 KP 0.98 ! LA 0.96 MK 1.02 OV 0.91 PT 0.86 ! SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.03 KP 0.98 ! LA 0.97 MK 1.07 OV 0.92 PT 0.87 ! SC 1.06 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.01 KP 1.00 ! LA 0.96 MK 1.06 OV 0.93 PT 0.87 ! SC 1.09 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.05 KP 0.98 ! LA 0.97 MK 1.08 OV 0.93 PT 0.86 ! SC 1.06 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.05 KP 0.99 ! LA 0.96 MK 1.06 OV 0.91 PT 0.88 ! SC 1.08 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.05 KP 0.99 ! LA 0.96 MK 1.09 OV 0.93 PT 0.87 ! SC 1.10 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.06 KP 1.00 ! LA 0.94 MK 1.09 OV 0.94 PT 0.87 ! SC 1.12 ! ! ! Fit before self-cal, rms=0.062837Jy sigma=0.531396 ! Fit after self-cal, rms=0.053944Jy sigma=0.467946 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8803 mas, bmaj=1.814 mas, bpa=-3.023 degrees ! Estimated noise=0.434167 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.2, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00835926 Jy ! Component: 100 - total flux cleaned = 0.0129199 Jy ! Component: 150 - total flux cleaned = 0.0153321 Jy ! Component: 200 - total flux cleaned = 0.0163854 Jy ! Total flux subtracted in 200 components = 0.0163854 Jy ! Clean residual min=-0.003526 max=0.005140 Jy/beam ! Clean residual mean=-0.000001 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.540977 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 144 components and 0.540977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052416Jy sigma=0.451404 ! Fit after self-cal, rms=0.052364Jy sigma=0.450643 ! Inverting map ! Added new window around map position (-10, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416915 Jy ! Component: 100 - total flux cleaned = 0.00583893 Jy ! Component: 150 - total flux cleaned = 0.00623964 Jy ! Component: 200 - total flux cleaned = 0.00641515 Jy ! Total flux subtracted in 200 components = 0.00641515 Jy ! Clean residual min=-0.002823 max=0.002743 Jy/beam ! Clean residual mean=-0.000001 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.547392 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 164 components and 0.547393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051831Jy sigma=0.444743 ! Fit after self-cal, rms=0.051779Jy sigma=0.444354 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051779Jy sigma=0.444354 ! Fit after self-cal, rms=0.051108Jy sigma=0.440294 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8761 mas, bmaj=1.808 mas, bpa=-2.915 degrees ! Estimated noise=0.432713 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289676 Jy ! Component: 100 - total flux cleaned = 0.00458171 Jy ! Component: 150 - total flux cleaned = 0.00604681 Jy ! Component: 200 - total flux cleaned = 0.00692417 Jy ! Total flux subtracted in 200 components = 0.00692417 Jy ! Clean residual min=-0.001691 max=0.002179 Jy/beam ! Clean residual mean=0.000002 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.554317 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 183 components and 0.554317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050859Jy sigma=0.437758 ! Fit after self-cal, rms=0.050848Jy sigma=0.437631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.4, 13.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147075 Jy ! Component: 100 - total flux cleaned = 0.0015836 Jy ! Component: 150 - total flux cleaned = 0.00179707 Jy ! Component: 200 - total flux cleaned = 0.00199437 Jy ! Total flux subtracted in 200 components = 0.00199437 Jy ! Clean residual min=-0.001559 max=0.001777 Jy/beam ! Clean residual mean=0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.556311 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 201 components and 0.556311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050718Jy sigma=0.436409 ! Fit after self-cal, rms=0.050713Jy sigma=0.436373 ! Inverting map ! Added new window around map position (0.6, -20.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110184 Jy ! Component: 100 - total flux cleaned = 0.00138225 Jy ! Component: 150 - total flux cleaned = 0.00155809 Jy ! Component: 200 - total flux cleaned = 0.00176522 Jy ! Total flux subtracted in 200 components = 0.00176522 Jy ! Clean residual min=-0.001511 max=0.001711 Jy/beam ! Clean residual mean=0.000002 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.558076 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 217 components and 0.558076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050629Jy sigma=0.435578 ! Fit after self-cal, rms=0.050626Jy sigma=0.435562 ! Inverting map ! Added new window around map position (-9.4, 10.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000926204 Jy ! Component: 100 - total flux cleaned = 0.00123165 Jy ! Component: 150 - total flux cleaned = 0.00147187 Jy ! Component: 200 - total flux cleaned = 0.00162281 Jy ! Total flux subtracted in 200 components = 0.00162281 Jy ! Clean residual min=-0.001422 max=0.001405 Jy/beam ! Clean residual mean=0.000001 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.559699 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 236 components and 0.559699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050548Jy sigma=0.434894 ! Fit after self-cal, rms=0.050546Jy sigma=0.434881 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050546Jy sigma=0.434881 ! Fit after self-cal, rms=0.050445Jy sigma=0.434593 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8753 mas, bmaj=1.807 mas, bpa=-2.823 degrees ! Estimated noise=0.432382 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116143 Jy ! Component: 100 - total flux cleaned = 0.00200883 Jy ! Component: 150 - total flux cleaned = 0.00244232 Jy ! Component: 200 - total flux cleaned = 0.00267751 Jy ! Total flux subtracted in 200 components = 0.00267751 Jy ! Clean residual min=-0.001184 max=0.001286 Jy/beam ! Clean residual mean=0.000001 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.562376 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 249 components and 0.562376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050390Jy sigma=0.434091 ! Fit after self-cal, rms=0.050389Jy sigma=0.434082 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (36.2, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00095611 Jy ! Component: 100 - total flux cleaned = 0.00127954 Jy ! Component: 150 - total flux cleaned = 0.00152082 Jy ! Component: 200 - total flux cleaned = 0.00166293 Jy ! Total flux subtracted in 200 components = 0.00166293 Jy ! Clean residual min=-0.001108 max=0.001192 Jy/beam ! Clean residual mean=0.000001 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.564039 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 267 components and 0.564039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050344Jy sigma=0.433672 ! Fit after self-cal, rms=0.050342Jy sigma=0.433661 ! Inverting map ! Added new window around map position (6.6, 25.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571326 Jy ! Component: 100 - total flux cleaned = 0.000804381 Jy ! Component: 150 - total flux cleaned = 0.000913291 Jy ! Component: 200 - total flux cleaned = 0.00104089 Jy ! Total flux subtracted in 200 components = 0.00104089 Jy ! Clean residual min=-0.001127 max=0.001137 Jy/beam ! Clean residual mean=0.000001 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.56508 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 283 components and 0.56508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050306Jy sigma=0.433334 ! Fit after self-cal, rms=0.050304Jy sigma=0.433327 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050304Jy sigma=0.433327 ! Fit after self-cal, rms=0.050268Jy sigma=0.433263 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.23 mas, bmaj=2.875 mas, bpa=10.96 degrees ! Estimated noise=0.550165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00088968 Jy ! Component: 100 - total flux cleaned = 0.00127535 Jy ! Component: 150 - total flux cleaned = 0.00152559 Jy ! Component: 200 - total flux cleaned = 0.00175166 Jy ! Total flux subtracted in 200 components = 0.00175166 Jy ! Clean residual min=-0.001142 max=0.001408 Jy/beam ! Clean residual mean=0.000001 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.566832 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 304 components and 0.566831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050251Jy sigma=0.433092 ! Fit after self-cal, rms=0.050248Jy sigma=0.433080 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30.4, -8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000653348 Jy ! Component: 100 - total flux cleaned = 0.000867221 Jy ! Component: 150 - total flux cleaned = 0.00109413 Jy ! Component: 200 - total flux cleaned = 0.00132344 Jy ! Total flux subtracted in 200 components = 0.00132344 Jy ! Clean residual min=-0.000975 max=0.001016 Jy/beam ! Clean residual mean=0.000001 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.568155 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 331 components and 0.568155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050219Jy sigma=0.432813 ! Fit after self-cal, rms=0.050218Jy sigma=0.432803 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.875 mas, bmaj=1.807 mas, bpa=-2.803 degrees ! Estimated noise=0.432373 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.875 x 1.807 at -2.803 degrees (North through East) ! Clean map min=-0.0011579 max=0.1944 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6678 mas, bmaj=1.5 mas, bpa=-3.219 degrees ! Estimated noise=0.818429 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131982 Jy ! Component: 100 - total flux cleaned = 0.192358 Jy ! Component: 150 - total flux cleaned = 0.238617 Jy ! Component: 200 - total flux cleaned = 0.275376 Jy ! Total flux subtracted in 200 components = 0.275376 Jy ! Clean residual min=-0.011621 max=0.022097 Jy/beam ! Clean residual mean=0.000039 rms=0.003397 Jy/beam ! Combined flux in latest and established models = 0.275376 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.275376 Jy ! Inverting map and beam ! Estimated beam: bmin=0.875 mas, bmaj=1.807 mas, bpa=-2.803 degrees ! Estimated noise=0.432373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0524329 Jy ! Component: 100 - total flux cleaned = 0.0918399 Jy ! Component: 150 - total flux cleaned = 0.123253 Jy ! Component: 200 - total flux cleaned = 0.148569 Jy ! Total flux subtracted in 200 components = 0.148569 Jy ! Clean residual min=-0.009219 max=0.015091 Jy/beam ! Clean residual mean=0.000030 rms=0.002848 Jy/beam ! Combined flux in latest and established models = 0.423945 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 53 components and 0.423945 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206188 Jy ! Component: 100 - total flux cleaned = 0.0376998 Jy ! Component: 150 - total flux cleaned = 0.051995 Jy ! Component: 200 - total flux cleaned = 0.0640566 Jy ! Total flux subtracted in 200 components = 0.0640566 Jy ! Clean residual min=-0.005171 max=0.007426 Jy/beam ! Clean residual mean=0.000016 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.488002 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 98 components and 0.488002 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102461 Jy ! Component: 100 - total flux cleaned = 0.0189779 Jy ! Component: 150 - total flux cleaned = 0.0264405 Jy ! Component: 200 - total flux cleaned = 0.0328379 Jy ! Total flux subtracted in 200 components = 0.0328379 Jy ! Clean residual min=-0.003107 max=0.003941 Jy/beam ! Clean residual mean=0.000009 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.52084 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 130 components and 0.52084 Jy ! Inverting map ! Added new window around map position (-8.4, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00549898 Jy ! Component: 100 - total flux cleaned = 0.0102362 Jy ! Component: 150 - total flux cleaned = 0.0143363 Jy ! Component: 200 - total flux cleaned = 0.0179034 Jy ! Total flux subtracted in 200 components = 0.0179034 Jy ! Clean residual min=-0.002078 max=0.002374 Jy/beam ! Clean residual mean=0.000005 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.538743 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 162 components and 0.538743 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.23 mas, bmaj=2.875 mas, bpa=10.96 degrees ! Estimated noise=0.550165 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0059229 Jy ! Component: 100 - total flux cleaned = 0.0102574 Jy ! Component: 150 - total flux cleaned = 0.0136187 Jy ! Component: 200 - total flux cleaned = 0.0163354 Jy ! Total flux subtracted in 200 components = 0.0163354 Jy ! Clean residual min=-0.002146 max=0.001798 Jy/beam ! Clean residual mean=0.000005 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.555079 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224653 Jy ! Component: 100 - total flux cleaned = 0.00405358 Jy ! Component: 150 - total flux cleaned = 0.00552841 Jy ! Component: 200 - total flux cleaned = 0.0068095 Jy ! Total flux subtracted in 200 components = 0.0068095 Jy ! Clean residual min=-0.001554 max=0.001290 Jy/beam ! Clean residual mean=0.000003 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.561888 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 235 components and 0.561888 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.875 mas, bmaj=1.807 mas, bpa=-2.803 degrees ! Estimated noise=0.432373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000931798 Jy ! Component: 100 - total flux cleaned = 0.00144276 Jy ! Component: 150 - total flux cleaned = 0.00176788 Jy ! Component: 200 - total flux cleaned = 0.00202467 Jy ! Total flux subtracted in 200 components = 0.00202467 Jy ! Clean residual min=-0.001333 max=0.001182 Jy/beam ! Clean residual mean=0.000001 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.563913 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 260 components and 0.563913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050371Jy sigma=0.434141 ! Fit after self-cal, rms=0.050334Jy sigma=0.433831 wmodel J2340+2641_X_map.mod ! Writing 260 model components to file: J2340+2641_X_map.mod wobs J2340+2641_X_uvs.fits ! Writing UV FITS file: J2340+2641_X_uvs.fits wwins J2340+2641_X_map.win ! wwins: Wrote 16 windows to J2340+2641_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037089 Jy ! Component: 100 - total flux cleaned = 0.000528681 Jy ! Component: 150 - total flux cleaned = 0.000509302 Jy ! Component: 200 - total flux cleaned = 0.000526585 Jy ! Component: 250 - total flux cleaned = 0.000666289 Jy ! Component: 300 - total flux cleaned = 0.000802449 Jy ! Component: 350 - total flux cleaned = 0.000968721 Jy ! Component: 400 - total flux cleaned = 0.00105027 Jy ! Component: 450 - total flux cleaned = 0.00111445 Jy ! Component: 500 - total flux cleaned = 0.00122423 Jy ! Component: 550 - total flux cleaned = 0.00131639 Jy ! Component: 600 - total flux cleaned = 0.00140699 Jy ! Component: 650 - total flux cleaned = 0.0014816 Jy ! Component: 700 - total flux cleaned = 0.00156928 Jy ! Component: 750 - total flux cleaned = 0.00167045 Jy ! Component: 800 - total flux cleaned = 0.00171277 Jy ! Component: 850 - total flux cleaned = 0.0017544 Jy ! Component: 900 - total flux cleaned = 0.00175436 Jy ! Component: 950 - total flux cleaned = 0.00182256 Jy ! Component: 1000 - total flux cleaned = 0.00186307 Jy ! Component: 1050 - total flux cleaned = 0.00182357 Jy ! Component: 1100 - total flux cleaned = 0.00194178 Jy ! Component: 1150 - total flux cleaned = 0.00198052 Jy ! Component: 1200 - total flux cleaned = 0.0020317 Jy ! Component: 1250 - total flux cleaned = 0.00204422 Jy ! Component: 1300 - total flux cleaned = 0.00208199 Jy ! Component: 1350 - total flux cleaned = 0.00209426 Jy ! Component: 1400 - total flux cleaned = 0.00213096 Jy ! Component: 1450 - total flux cleaned = 0.00216705 Jy ! Component: 1500 - total flux cleaned = 0.0021668 Jy ! Component: 1550 - total flux cleaned = 0.00215544 Jy ! Component: 1600 - total flux cleaned = 0.00220207 Jy ! Component: 1650 - total flux cleaned = 0.00220205 Jy ! Component: 1700 - total flux cleaned = 0.00219072 Jy ! Component: 1750 - total flux cleaned = 0.0022019 Jy ! Component: 1800 - total flux cleaned = 0.00217937 Jy ! Component: 1850 - total flux cleaned = 0.00217935 Jy ! Component: 1900 - total flux cleaned = 0.00217927 Jy ! Component: 1950 - total flux cleaned = 0.00216825 Jy ! Component: 2000 - total flux cleaned = 0.00217907 Jy ! Component: 2050 - total flux cleaned = 0.00214722 Jy ! Component: 2100 - total flux cleaned = 0.00214721 Jy ! Component: 2150 - total flux cleaned = 0.00213683 Jy ! Component: 2200 - total flux cleaned = 0.00214735 Jy ! Component: 2250 - total flux cleaned = 0.00215771 Jy ! Component: 2300 - total flux cleaned = 0.00218857 Jy ! Component: 2350 - total flux cleaned = 0.00213755 Jy ! Component: 2400 - total flux cleaned = 0.00214781 Jy ! Component: 2450 - total flux cleaned = 0.00214783 Jy ! Component: 2500 - total flux cleaned = 0.00208832 Jy ! Component: 2550 - total flux cleaned = 0.00210797 Jy ! Component: 2600 - total flux cleaned = 0.00202014 Jy ! Component: 2650 - total flux cleaned = 0.00200091 Jy ! Component: 2700 - total flux cleaned = 0.00205872 Jy ! Component: 2750 - total flux cleaned = 0.00197287 Jy ! Component: 2800 - total flux cleaned = 0.00196345 Jy ! Component: 2850 - total flux cleaned = 0.00198227 Jy ! Component: 2900 - total flux cleaned = 0.00198223 Jy ! Component: 2950 - total flux cleaned = 0.00195439 Jy ! Component: 3000 - total flux cleaned = 0.00193605 Jy ! Component: 3050 - total flux cleaned = 0.00191784 Jy ! Component: 3100 - total flux cleaned = 0.00185432 Jy ! Component: 3150 - total flux cleaned = 0.00185435 Jy ! Component: 3200 - total flux cleaned = 0.00188123 Jy ! Component: 3250 - total flux cleaned = 0.00180127 Jy ! Component: 3300 - total flux cleaned = 0.00181886 Jy ! Component: 3350 - total flux cleaned = 0.00180146 Jy ! Component: 3400 - total flux cleaned = 0.00177542 Jy ! Component: 3450 - total flux cleaned = 0.00172369 Jy ! Component: 3500 - total flux cleaned = 0.00174934 Jy ! Component: 3550 - total flux cleaned = 0.00174096 Jy ! Component: 3600 - total flux cleaned = 0.00174085 Jy ! Component: 3650 - total flux cleaned = 0.00170724 Jy ! Component: 3700 - total flux cleaned = 0.0016989 Jy ! Component: 3750 - total flux cleaned = 0.00169886 Jy ! Component: 3800 - total flux cleaned = 0.00166583 Jy ! Component: 3850 - total flux cleaned = 0.00164131 Jy ! Component: 3900 - total flux cleaned = 0.00160872 Jy ! Component: 3950 - total flux cleaned = 0.0016088 Jy ! Component: 4000 - total flux cleaned = 0.00160079 Jy ! Component: 4050 - total flux cleaned = 0.00154488 Jy ! Total flux subtracted in 4096 components = 0.00156071 Jy ! Clean residual min=-0.000419 max=0.000476 Jy/beam ! Clean residual mean=0.000000 rms=0.000136 Jy/beam ! Combined flux in latest and established models = 0.565473 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 584 components and 0.565474 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2340+2641_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.875 x 1.807 at -2.803 degrees (North through East) ! Clean map min=-0.000823 max=0.19511 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2340+2641_X_map.fits wmodel /image_prod/ug002_uva//J2340+2641_X_map.mod ! Writing 584 model components to file: /image_prod/ug002_uva//J2340+2641_X_map.mod wobs /image_prod/ug002_uva//J2340+2641_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2340+2641_X_uvs.fits wwins /image_prod/ug002_uva//J2340+2641_X_map.win ! wwins: Wrote 17 windows to /image_prod/ug002_uva//J2340+2641_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.195108 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00013551 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.208362 0.208362 0.416724 0.833449 1.6669 3.33379 6.66759 13.3352 26.6704 53.3407 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.195 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1439.8 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2340+2641_X_dfm.log closed on Thu Mar 5 06:22:51 2020