! Started logfile: /image_prod/ug002_uva//J2330-3724_X_dfm.log on Thu Mar 5 06:18:52 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2330-3724_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2330-3724_X_uva.fits ! AN table 1: 25 integrations on 28 of 28 possible baselines. ! AN table 2: 25 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.975 visibilities/baseline/integration-bin. ! Found source: J2330-3724 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 16380 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2330-3724_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.786911Jy sigma=6.761422 ! Fit after self-cal, rms=0.613808Jy sigma=2.214415 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5558 mas, bmaj=2.261 mas, bpa=-11.91 degrees ! Estimated noise=2.99752 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.963907 Jy ! Component: 100 - total flux cleaned = 1.21651 Jy ! Total flux subtracted in 100 components = 1.21651 Jy ! Clean residual min=-0.102579 max=0.185586 Jy/beam ! Clean residual mean=-0.000735 rms=0.024393 Jy/beam ! Combined flux in latest and established models = 1.21651 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.21651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.491409Jy sigma=1.780090 ! Fit after self-cal, rms=0.491239Jy sigma=1.779647 ! Inverting map ! Added new window around map position (-1, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.177343 Jy ! Component: 100 - total flux cleaned = 0.281657 Jy ! Total flux subtracted in 100 components = 0.281657 Jy ! Clean residual min=-0.072424 max=0.130895 Jy/beam ! Clean residual mean=-0.000489 rms=0.018745 Jy/beam ! Combined flux in latest and established models = 1.49817 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 1.49817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.383242Jy sigma=1.428150 ! Fit after self-cal, rms=0.378565Jy sigma=1.408343 ! Inverting map ! Added new window around map position (1.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0941859 Jy ! Component: 100 - total flux cleaned = 0.136703 Jy ! Total flux subtracted in 100 components = 0.136703 Jy ! Clean residual min=-0.059755 max=0.101418 Jy/beam ! Clean residual mean=-0.000377 rms=0.015586 Jy/beam ! Combined flux in latest and established models = 1.63487 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 1.63487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.331816Jy sigma=1.252372 ! Fit after self-cal, rms=0.328173Jy sigma=1.239145 ! Inverting map ! Added new window around map position (1, 30.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0950262 Jy ! Component: 100 - total flux cleaned = 0.149891 Jy ! Total flux subtracted in 100 components = 0.149891 Jy ! Clean residual min=-0.046142 max=0.083808 Jy/beam ! Clean residual mean=-0.000271 rms=0.012999 Jy/beam ! Combined flux in latest and established models = 1.78476 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 1.78476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.293748Jy sigma=1.110365 ! Fit after self-cal, rms=0.290204Jy sigma=1.096111 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7663 mas, bmaj=2.704 mas, bpa=-9.434 degrees ! Estimated noise=1.45327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.061966 Jy ! Component: 100 - total flux cleaned = 0.0845423 Jy ! Component: 150 - total flux cleaned = 0.0915916 Jy ! Component: 200 - total flux cleaned = 0.0976449 Jy ! Total flux subtracted in 200 components = 0.0976449 Jy ! Clean residual min=-0.062886 max=0.095468 Jy/beam ! Clean residual mean=-0.000788 rms=0.019416 Jy/beam ! Combined flux in latest and established models = 1.88241 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 46 components and 1.88241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.269398Jy sigma=1.028093 ! Fit after self-cal, rms=0.268726Jy sigma=1.025405 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7663 x 2.704 at -9.434 degrees (North through East) ! Clean map min=-0.062546 max=1.2213 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 HN 1.31 KP 0.97 LA 0.99 ! MK 1.07 NL 1.04 PT 0.82 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.96 KP 1.02 LA 0.99 ! MK 0.97 NL 1.58 OV 1.00 PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.24 KP 0.95 LA 1.00 ! MK 1.05 NL 1.04 PT 0.86 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 KP 1.01 LA 0.99 ! MK 0.95 NL 1.60 OV 0.96 PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 HN 1.27 KP 0.95 LA 0.98 ! MK 1.06 NL 1.05 PT 0.84 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 KP 1.00 LA 0.97 ! MK 0.97 NL 1.58 OV 0.97 PT 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.31 KP 0.93 LA 1.02 ! MK 1.06 NL 1.01 PT 0.85 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 KP 0.99 LA 1.01 ! MK 0.99 NL 1.54 OV 0.98 PT 0.91 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.21 KP 0.94 LA 0.97 ! MK 1.04 NL 1.03 PT 0.83 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.00 KP 1.01 LA 0.98 ! MK 0.97 NL 1.55 OV 0.97 PT 0.89 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.21 KP 0.92 LA 0.95 ! MK 1.03 NL 1.03 PT 0.82 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.98 KP 1.00 LA 0.95 ! MK 0.95 NL 1.58 OV 0.98 PT 0.89 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.20 KP 0.95 LA 0.95 ! MK 1.12 NL 1.01 PT 0.82 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 KP 1.00 LA 0.96 ! MK 1.02 NL 1.59 OV 0.96 PT 0.88 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.23 KP 0.97 LA 0.98 ! MK 1.05 NL 0.99 PT 0.83 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 KP 1.02 LA 0.97 ! MK 0.94 NL 1.54 OV 0.99 PT 0.90 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.25 KP 0.92 LA 0.99 ! MK 1.06 NL 0.96 PT 0.84 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.99 KP 0.97 LA 0.98 ! MK 0.94 NL 1.50 OV 0.96 PT 0.89 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 HN 1.23 KP 0.96 LA 0.96 ! MK 1.09 NL 0.99 PT 0.83 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 KP 1.01 LA 0.95 ! MK 0.96 NL 1.57 OV 1.00 PT 0.90 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.23 KP 0.94 LA 0.99 ! MK 1.05 NL 0.95 PT 0.85 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.97 KP 1.01 LA 0.98 ! MK 0.93 NL 1.51 OV 0.95 PT 0.92 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 0.91 HN 1.27 KP 0.91 LA 0.96 ! MK 1.11 NL 1.00 PT 0.81 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.93 KP 1.03 LA 0.97 ! MK 0.97 NL 1.55 OV 0.97 PT 0.87 ! ! ! Fit before self-cal, rms=0.268726Jy sigma=1.025405 ! Fit after self-cal, rms=0.171734Jy sigma=0.557710 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7781 mas, bmaj=2.69 mas, bpa=-9.198 degrees ! Estimated noise=1.48047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0411225 Jy ! Component: 100 - total flux cleaned = -0.0483583 Jy ! Component: 150 - total flux cleaned = -0.0532369 Jy ! Component: 200 - total flux cleaned = -0.0568827 Jy ! Total flux subtracted in 200 components = -0.0568827 Jy ! Clean residual min=-0.037654 max=0.032299 Jy/beam ! Clean residual mean=-0.000240 rms=0.007052 Jy/beam ! Combined flux in latest and established models = 1.82552 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 1.82552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.158322Jy sigma=0.507381 ! Fit after self-cal, rms=0.156129Jy sigma=0.501981 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.156129Jy sigma=0.501981 ! Fit after self-cal, rms=0.156963Jy sigma=0.495678 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7787 mas, bmaj=2.691 mas, bpa=-9.172 degrees ! Estimated noise=1.48041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0237553 Jy ! Component: 100 - total flux cleaned = -0.0281504 Jy ! Component: 150 - total flux cleaned = -0.0313555 Jy ! Component: 200 - total flux cleaned = -0.0337959 Jy ! Total flux subtracted in 200 components = -0.0337959 Jy ! Clean residual min=-0.031548 max=0.029403 Jy/beam ! Clean residual mean=-0.000215 rms=0.006135 Jy/beam ! Combined flux in latest and established models = 1.79173 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 65 components and 1.79173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.150799Jy sigma=0.472009 ! Fit after self-cal, rms=0.149313Jy sigma=0.469134 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00860171 Jy ! Component: 100 - total flux cleaned = -0.0103223 Jy ! Component: 150 - total flux cleaned = -0.0118043 Jy ! Component: 200 - total flux cleaned = -0.0138684 Jy ! Total flux subtracted in 200 components = -0.0138684 Jy ! Clean residual min=-0.027880 max=0.029577 Jy/beam ! Clean residual mean=-0.000257 rms=0.005827 Jy/beam ! Combined flux in latest and established models = 1.77786 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 72 components and 1.77786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.146783Jy sigma=0.459298 ! Fit after self-cal, rms=0.146120Jy sigma=0.458220 ! Inverting map ! Added new window around map position (0.4, -19.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279154 Jy ! Component: 100 - total flux cleaned = 0.0339666 Jy ! Component: 150 - total flux cleaned = 0.0373143 Jy ! Component: 200 - total flux cleaned = 0.0402514 Jy ! Total flux subtracted in 200 components = 0.0402514 Jy ! Clean residual min=-0.024421 max=0.019442 Jy/beam ! Clean residual mean=-0.000103 rms=0.005064 Jy/beam ! Combined flux in latest and established models = 1.81811 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 101 components and 1.81811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138492Jy sigma=0.435401 ! Fit after self-cal, rms=0.138108Jy sigma=0.433910 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138108Jy sigma=0.433910 ! Fit after self-cal, rms=0.137176Jy sigma=0.425296 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.78 mas, bmaj=2.691 mas, bpa=-9.106 degrees ! Estimated noise=1.48096 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0122735 Jy ! Component: 100 - total flux cleaned = -0.0135906 Jy ! Component: 150 - total flux cleaned = -0.0135951 Jy ! Component: 200 - total flux cleaned = -0.013942 Jy ! Total flux subtracted in 200 components = -0.013942 Jy ! Clean residual min=-0.021448 max=0.018547 Jy/beam ! Clean residual mean=-0.000076 rms=0.004348 Jy/beam ! Combined flux in latest and established models = 1.80417 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 108 components and 1.80417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134076Jy sigma=0.413906 ! Fit after self-cal, rms=0.133498Jy sigma=0.412905 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0034066 Jy ! Component: 100 - total flux cleaned = -0.00245284 Jy ! Component: 150 - total flux cleaned = -0.00217488 Jy ! Component: 200 - total flux cleaned = -0.00217077 Jy ! Total flux subtracted in 200 components = -0.00217077 Jy ! Clean residual min=-0.019035 max=0.017846 Jy/beam ! Clean residual mean=-0.000081 rms=0.004176 Jy/beam ! Combined flux in latest and established models = 1.802 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 115 components and 1.802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131979Jy sigma=0.407604 ! Fit after self-cal, rms=0.131666Jy sigma=0.407147 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131666Jy sigma=0.407147 ! Fit after self-cal, rms=0.131495Jy sigma=0.404408 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.227 mas, bmaj=6.944 mas, bpa=6.281 degrees ! Estimated noise=1.99946 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0108486 Jy ! Component: 100 - total flux cleaned = -0.0123006 Jy ! Component: 150 - total flux cleaned = -0.0134722 Jy ! Component: 200 - total flux cleaned = -0.0138795 Jy ! Total flux subtracted in 200 components = -0.0138795 Jy ! Clean residual min=-0.020021 max=0.022745 Jy/beam ! Clean residual mean=-0.000139 rms=0.005211 Jy/beam ! Combined flux in latest and established models = 1.78812 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 124 components and 1.78812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130248Jy sigma=0.401590 ! Fit after self-cal, rms=0.129988Jy sigma=0.401169 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175961 Jy ! Component: 100 - total flux cleaned = 0.0236912 Jy ! Component: 150 - total flux cleaned = 0.0248241 Jy ! Component: 200 - total flux cleaned = 0.0258223 Jy ! Total flux subtracted in 200 components = 0.0258223 Jy ! Clean residual min=-0.017512 max=0.012188 Jy/beam ! Clean residual mean=-0.000047 rms=0.004410 Jy/beam ! Combined flux in latest and established models = 1.81394 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 162 components and 1.81394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126090Jy sigma=0.391158 ! Fit after self-cal, rms=0.125951Jy sigma=0.390556 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7804 mas, bmaj=2.691 mas, bpa=-9.071 degrees ! Estimated noise=1.4809 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7804 x 2.691 at -9.071 degrees (North through East) ! Clean map min=-0.026367 max=1.2574 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125951Jy sigma=0.390556 ! Fit after self-cal, rms=0.107971Jy sigma=0.332722 ! Inverting map and beam ! Estimated beam: bmin=0.7817 mas, bmaj=2.695 mas, bpa=-9.04 degrees ! Estimated noise=1.47762 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00162142 Jy ! Component: 100 - total flux cleaned = -0.000445076 Jy ! Component: 150 - total flux cleaned = -0.0004209 Jy ! Component: 200 - total flux cleaned = 0.000261168 Jy ! Total flux subtracted in 200 components = 0.000261168 Jy ! Clean residual min=-0.013073 max=0.014071 Jy/beam ! Clean residual mean=-0.000010 rms=0.003002 Jy/beam ! Combined flux in latest and established models = 1.8142 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 198 components and 1.8142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104867Jy sigma=0.322631 ! Fit after self-cal, rms=0.104750Jy sigma=0.322413 ! Inverting map ! Added new window around map position (-2.8, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00707543 Jy ! Component: 100 - total flux cleaned = 0.00708419 Jy ! Component: 150 - total flux cleaned = 0.00796003 Jy ! Component: 200 - total flux cleaned = 0.00822941 Jy ! Total flux subtracted in 200 components = 0.00822941 Jy ! Clean residual min=-0.011056 max=0.010688 Jy/beam ! Clean residual mean=0.000019 rms=0.002746 Jy/beam ! Combined flux in latest and established models = 1.82243 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 228 components and 1.82243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101763Jy sigma=0.314073 ! Fit after self-cal, rms=0.101752Jy sigma=0.313787 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101752Jy sigma=0.313787 ! Fit after self-cal, rms=0.101189Jy sigma=0.312582 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5684 mas, bmaj=2.218 mas, bpa=-11.35 degrees ! Estimated noise=3.13556 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.00724 Jy ! Component: 100 - total flux cleaned = 1.26537 Jy ! Component: 150 - total flux cleaned = 1.40601 Jy ! Component: 200 - total flux cleaned = 1.49663 Jy ! Total flux subtracted in 200 components = 1.49663 Jy ! Clean residual min=-0.043671 max=0.051561 Jy/beam ! Clean residual mean=-0.000320 rms=0.008234 Jy/beam ! Combined flux in latest and established models = 1.49663 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.49663 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7808 mas, bmaj=2.691 mas, bpa=-9.01 degrees ! Estimated noise=1.47473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0828151 Jy ! Component: 100 - total flux cleaned = 0.133884 Jy ! Component: 150 - total flux cleaned = 0.171327 Jy ! Component: 200 - total flux cleaned = 0.199824 Jy ! Total flux subtracted in 200 components = 0.199824 Jy ! Clean residual min=-0.019514 max=0.027326 Jy/beam ! Clean residual mean=-0.000396 rms=0.005047 Jy/beam ! Combined flux in latest and established models = 1.69645 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 52 components and 1.69645 Jy ! Inverting map ! Added new window around map position (-2.8, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.026878 Jy ! Component: 100 - total flux cleaned = 0.0468696 Jy ! Component: 150 - total flux cleaned = 0.058539 Jy ! Component: 200 - total flux cleaned = 0.0657961 Jy ! Total flux subtracted in 200 components = 0.0657961 Jy ! Clean residual min=-0.015159 max=0.017123 Jy/beam ! Clean residual mean=-0.000183 rms=0.003785 Jy/beam ! Combined flux in latest and established models = 1.76225 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 92 components and 1.76225 Jy ! Inverting map ! Added new window around map position (-1.4, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165994 Jy ! Component: 100 - total flux cleaned = 0.0233173 Jy ! Component: 150 - total flux cleaned = 0.0265102 Jy ! Component: 200 - total flux cleaned = 0.0294395 Jy ! Total flux subtracted in 200 components = 0.0294395 Jy ! Clean residual min=-0.012862 max=0.012058 Jy/beam ! Clean residual mean=-0.000085 rms=0.003201 Jy/beam ! Combined flux in latest and established models = 1.79169 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 132 components and 1.79169 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.229 mas, bmaj=6.952 mas, bpa=6.294 degrees ! Estimated noise=1.99005 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118843 Jy ! Component: 100 - total flux cleaned = 0.0169713 Jy ! Component: 150 - total flux cleaned = 0.0206798 Jy ! Component: 200 - total flux cleaned = 0.02305 Jy ! Total flux subtracted in 200 components = 0.02305 Jy ! Clean residual min=-0.013735 max=0.013148 Jy/beam ! Clean residual mean=-0.000052 rms=0.004056 Jy/beam ! Combined flux in latest and established models = 1.81474 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218016 Jy ! Component: 100 - total flux cleaned = 0.00392147 Jy ! Component: 150 - total flux cleaned = 0.00500968 Jy ! Component: 200 - total flux cleaned = 0.00629487 Jy ! Total flux subtracted in 200 components = 0.00629487 Jy ! Clean residual min=-0.012973 max=0.012150 Jy/beam ! Clean residual mean=-0.000021 rms=0.003854 Jy/beam ! Combined flux in latest and established models = 1.82104 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 183 components and 1.82104 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7808 mas, bmaj=2.691 mas, bpa=-9.01 degrees ! Estimated noise=1.47473 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00268734 Jy ! Component: 100 - total flux cleaned = -0.00236432 Jy ! Component: 150 - total flux cleaned = -0.000921905 Jy ! Component: 200 - total flux cleaned = -0.000105572 Jy ! Total flux subtracted in 200 components = -0.000105572 Jy ! Clean residual min=-0.010878 max=0.009758 Jy/beam ! Clean residual mean=-0.000014 rms=0.002627 Jy/beam ! Combined flux in latest and established models = 1.82093 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 218 components and 1.82093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101206Jy sigma=0.313592 ! Fit after self-cal, rms=0.100478Jy sigma=0.310315 wmodel J2330-3724_X_map.mod ! Writing 218 model components to file: J2330-3724_X_map.mod wobs J2330-3724_X_uvs.fits ! Writing UV FITS file: J2330-3724_X_uvs.fits wwins J2330-3724_X_map.win ! wwins: Wrote 9 windows to J2330-3724_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000392863 Jy ! Component: 100 - total flux cleaned = -0.00171905 Jy ! Component: 150 - total flux cleaned = -0.00362783 Jy ! Component: 200 - total flux cleaned = -0.0054578 Jy ! Component: 250 - total flux cleaned = -0.00707227 Jy ! Component: 300 - total flux cleaned = -0.00849116 Jy ! Component: 350 - total flux cleaned = -0.00972599 Jy ! Component: 400 - total flux cleaned = -0.0106588 Jy ! Component: 450 - total flux cleaned = -0.0118235 Jy ! Component: 500 - total flux cleaned = -0.0125815 Jy ! Component: 550 - total flux cleaned = -0.0133205 Jy ! Component: 600 - total flux cleaned = -0.0139197 Jy ! Component: 650 - total flux cleaned = -0.0143865 Jy ! Component: 700 - total flux cleaned = -0.0145001 Jy ! Component: 750 - total flux cleaned = -0.0152815 Jy ! Component: 800 - total flux cleaned = -0.0157191 Jy ! Component: 850 - total flux cleaned = -0.0162581 Jy ! Component: 900 - total flux cleaned = -0.0169948 Jy ! Component: 950 - total flux cleaned = -0.017611 Jy ! Component: 1000 - total flux cleaned = -0.0181158 Jy ! Component: 1050 - total flux cleaned = -0.0185128 Jy ! Component: 1100 - total flux cleaned = -0.0191967 Jy ! Component: 1150 - total flux cleaned = -0.0196781 Jy ! Component: 1200 - total flux cleaned = -0.0200555 Jy ! Component: 1250 - total flux cleaned = -0.0205184 Jy ! Component: 1300 - total flux cleaned = -0.0207927 Jy ! Component: 1350 - total flux cleaned = -0.0209736 Jy ! Component: 1400 - total flux cleaned = -0.0210636 Jy ! Component: 1450 - total flux cleaned = -0.0213246 Jy ! Component: 1500 - total flux cleaned = -0.0214092 Jy ! Component: 1550 - total flux cleaned = -0.0215775 Jy ! Component: 1600 - total flux cleaned = -0.0215794 Jy ! Component: 1650 - total flux cleaned = -0.0217431 Jy ! Component: 1700 - total flux cleaned = -0.0219847 Jy ! Component: 1750 - total flux cleaned = -0.0219846 Jy ! Component: 1800 - total flux cleaned = -0.0220623 Jy ! Component: 1850 - total flux cleaned = -0.0219867 Jy ! Component: 1900 - total flux cleaned = -0.0222874 Jy ! Component: 1950 - total flux cleaned = -0.0222859 Jy ! Component: 2000 - total flux cleaned = -0.022358 Jy ! Component: 2050 - total flux cleaned = -0.022429 Jy ! Component: 2100 - total flux cleaned = -0.0222865 Jy ! Component: 2150 - total flux cleaned = -0.0224269 Jy ! Component: 2200 - total flux cleaned = -0.0222891 Jy ! Component: 2250 - total flux cleaned = -0.0224257 Jy ! Component: 2300 - total flux cleaned = -0.0223585 Jy ! Component: 2350 - total flux cleaned = -0.0222928 Jy ! Component: 2400 - total flux cleaned = -0.0220982 Jy ! Component: 2450 - total flux cleaned = -0.0220996 Jy ! Component: 2500 - total flux cleaned = -0.022037 Jy ! Component: 2550 - total flux cleaned = -0.0219117 Jy ! Component: 2600 - total flux cleaned = -0.021912 Jy ! Component: 2650 - total flux cleaned = -0.021789 Jy ! Component: 2700 - total flux cleaned = -0.0219099 Jy ! Component: 2750 - total flux cleaned = -0.0216109 Jy ! Component: 2800 - total flux cleaned = -0.0217282 Jy ! Component: 2850 - total flux cleaned = -0.0216687 Jy ! Component: 2900 - total flux cleaned = -0.0216686 Jy ! Component: 2950 - total flux cleaned = -0.0215544 Jy ! Component: 3000 - total flux cleaned = -0.0216102 Jy ! Component: 3050 - total flux cleaned = -0.0216661 Jy ! Component: 3100 - total flux cleaned = -0.0216659 Jy ! Component: 3150 - total flux cleaned = -0.021502 Jy ! Component: 3200 - total flux cleaned = -0.0215549 Jy ! Component: 3250 - total flux cleaned = -0.021555 Jy ! Component: 3300 - total flux cleaned = -0.0215013 Jy ! Component: 3350 - total flux cleaned = -0.0214493 Jy ! Component: 3400 - total flux cleaned = -0.0212954 Jy ! Component: 3450 - total flux cleaned = -0.0212445 Jy ! Component: 3500 - total flux cleaned = -0.0211945 Jy ! Component: 3550 - total flux cleaned = -0.0212445 Jy ! Component: 3600 - total flux cleaned = -0.021245 Jy ! Component: 3650 - total flux cleaned = -0.0211964 Jy ! Component: 3700 - total flux cleaned = -0.021244 Jy ! Component: 3750 - total flux cleaned = -0.0211966 Jy ! Component: 3800 - total flux cleaned = -0.0211027 Jy ! Component: 3850 - total flux cleaned = -0.0211494 Jy ! Component: 3900 - total flux cleaned = -0.0211032 Jy ! Component: 3950 - total flux cleaned = -0.0211945 Jy ! Component: 4000 - total flux cleaned = -0.0211492 Jy ! Component: 4050 - total flux cleaned = -0.0211494 Jy ! Total flux subtracted in 4096 components = -0.0211051 Jy ! Clean residual min=-0.002862 max=0.002548 Jy/beam ! Clean residual mean=-0.000010 rms=0.000910 Jy/beam ! Combined flux in latest and established models = 1.79982 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 537 components and 1.79982 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2330-3724_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7808 x 2.691 at -9.01 degrees (North through East) ! Clean map min=-0.011147 max=1.2776 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2330-3724_X_map.fits wmodel /image_prod/ug002_uva//J2330-3724_X_map.mod ! Writing 537 model components to file: /image_prod/ug002_uva//J2330-3724_X_map.mod wobs /image_prod/ug002_uva//J2330-3724_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2330-3724_X_uvs.fits wwins /image_prod/ug002_uva//J2330-3724_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J2330-3724_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.2776 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000874926 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.205446 0.205446 0.410892 0.821785 1.64357 3.28714 6.57428 13.1486 26.2971 52.5942 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.277 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1460.24 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2330-3724_X_dfm.log closed on Thu Mar 5 06:18:57 2020