! Started logfile: /image_prod/ug002_uva//J2330+3155_X_dfm.log on Thu Mar 5 06:18:29 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2330+3155_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2330+3155_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.848889 visibilities/baseline/integration-bin. ! Found source: J2330+3155 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 27504 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2330+3155_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.029701Jy sigma=8.793377 ! Fit after self-cal, rms=0.789229Jy sigma=6.794685 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.734 mas, bmaj=1.329 mas, bpa=-5.165 degrees ! Estimated noise=1.00175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160563 Jy ! Component: 100 - total flux cleaned = 0.197238 Jy ! Total flux subtracted in 100 components = 0.197238 Jy ! Clean residual min=-0.011671 max=0.013668 Jy/beam ! Clean residual mean=0.000000 rms=0.002327 Jy/beam ! Combined flux in latest and established models = 0.197238 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.197238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088194Jy sigma=0.743428 ! Fit after self-cal, rms=0.087888Jy sigma=0.740487 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153806 Jy ! Component: 100 - total flux cleaned = 0.0240332 Jy ! Total flux subtracted in 100 components = 0.0240332 Jy ! Clean residual min=-0.009772 max=0.010590 Jy/beam ! Clean residual mean=0.000002 rms=0.002134 Jy/beam ! Combined flux in latest and established models = 0.221271 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.221271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084433Jy sigma=0.717453 ! Fit after self-cal, rms=0.084419Jy sigma=0.717245 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.918 mas, bmaj=1.623 mas, bpa=-3.724 degrees ! Estimated noise=0.505286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00580003 Jy ! Component: 100 - total flux cleaned = 0.00695741 Jy ! Component: 150 - total flux cleaned = 0.00743217 Jy ! Component: 200 - total flux cleaned = 0.00781627 Jy ! Total flux subtracted in 200 components = 0.00781627 Jy ! Clean residual min=-0.011002 max=0.014542 Jy/beam ! Clean residual mean=0.000008 rms=0.003116 Jy/beam ! Combined flux in latest and established models = 0.229087 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.229087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083840Jy sigma=0.715038 ! Fit after self-cal, rms=0.083816Jy sigma=0.714834 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.918 x 1.623 at -3.724 degrees (North through East) ! Clean map min=-0.010849 max=0.21184 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.92 HN 0.96 KP 1.00 ! LA 1.43 MK 1.01 NL 1.11 OV 0.95 ! PT 0.77 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.89 HN 0.96 KP 0.99 ! LA 1.42 MK 1.03 NL 1.12 OV 0.94 ! PT 0.77 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.91 HN 0.95 KP 0.98 ! LA 1.43 MK 0.97 NL 1.12 OV 0.95 ! PT 0.80 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.90 HN 0.94 KP 0.98 ! LA 1.45 MK 1.02 NL 1.12 OV 0.95 ! PT 0.77 SC 0.99 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 0.98 KP 1.00 ! LA 1.41 MK 1.03 NL 1.12 OV 0.96 ! PT 0.79 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.93 HN 0.98 KP 1.00 ! LA 1.42 MK 1.02 NL 1.12 OV 0.96 ! PT 0.80 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 0.99 KP 1.00 ! LA 1.44 MK 1.04 NL 1.14 OV 0.96 ! PT 0.78 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.93 HN 0.98 KP 0.99 ! LA 1.44 MK 1.05 NL 1.13 OV 0.95 ! PT 0.78 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 0.97 KP 1.00 ! LA 1.38 MK 1.02 NL 1.14 OV 0.96 ! PT 0.81 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 1.01 KP 0.99 ! LA 1.40 MK 1.06 NL 1.14 OV 0.99 ! PT 0.79 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 1.03 KP 1.00 ! LA 1.41 MK 1.04 NL 1.14 OV 1.00 ! PT 0.80 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 1.04 KP 1.00 ! LA 1.40 MK 1.05 NL 1.17 OV 1.00 ! PT 0.77 SC 1.05 ! ! ! Fit before self-cal, rms=0.083816Jy sigma=0.714834 ! Fit after self-cal, rms=0.085413Jy sigma=0.636690 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9219 mas, bmaj=1.62 mas, bpa=-3.203 degrees ! Estimated noise=0.505731 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274836 Jy ! Component: 100 - total flux cleaned = 0.00332192 Jy ! Component: 150 - total flux cleaned = 0.00338172 Jy ! Component: 200 - total flux cleaned = 0.00349219 Jy ! Total flux subtracted in 200 components = 0.00349219 Jy ! Clean residual min=-0.009309 max=0.008897 Jy/beam ! Clean residual mean=0.000023 rms=0.002184 Jy/beam ! Combined flux in latest and established models = 0.232579 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.232579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085291Jy sigma=0.635597 ! Fit after self-cal, rms=0.085375Jy sigma=0.635083 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085375Jy sigma=0.635083 ! Fit after self-cal, rms=0.106137Jy sigma=0.556882 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9074 mas, bmaj=1.62 mas, bpa=-3.548 degrees ! Estimated noise=0.506564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024081 Jy ! Component: 100 - total flux cleaned = 0.00311298 Jy ! Component: 150 - total flux cleaned = 0.00339184 Jy ! Component: 200 - total flux cleaned = 0.00359861 Jy ! Total flux subtracted in 200 components = 0.00359861 Jy ! Clean residual min=-0.003554 max=0.009305 Jy/beam ! Clean residual mean=0.000007 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.236178 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.236178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106050Jy sigma=0.556085 ! Fit after self-cal, rms=0.106175Jy sigma=0.555760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, 21.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00866338 Jy ! Component: 100 - total flux cleaned = 0.0131898 Jy ! Component: 150 - total flux cleaned = 0.0162155 Jy ! Component: 200 - total flux cleaned = 0.0183628 Jy ! Total flux subtracted in 200 components = 0.0183628 Jy ! Clean residual min=-0.002849 max=0.005276 Jy/beam ! Clean residual mean=0.000005 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.254541 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 67 components and 0.254541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105471Jy sigma=0.545123 ! Fit after self-cal, rms=0.105393Jy sigma=0.544314 ! Inverting map ! Added new window around map position (2.8, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409818 Jy ! Component: 100 - total flux cleaned = 0.00478967 Jy ! Component: 150 - total flux cleaned = 0.00536978 Jy ! Component: 200 - total flux cleaned = 0.00615568 Jy ! Total flux subtracted in 200 components = 0.00615568 Jy ! Clean residual min=-0.002324 max=0.003171 Jy/beam ! Clean residual mean=0.000006 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.260696 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 100 components and 0.260696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105131Jy sigma=0.541356 ! Fit after self-cal, rms=0.105106Jy sigma=0.541199 ! Inverting map ! Added new window around map position (1.2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189961 Jy ! Component: 100 - total flux cleaned = 0.00258078 Jy ! Component: 150 - total flux cleaned = 0.0032454 Jy ! Component: 200 - total flux cleaned = 0.00379165 Jy ! Total flux subtracted in 200 components = 0.00379165 Jy ! Clean residual min=-0.002240 max=0.002754 Jy/beam ! Clean residual mean=0.000006 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.264488 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 117 components and 0.264488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105005Jy sigma=0.539881 ! Fit after self-cal, rms=0.105001Jy sigma=0.539810 ! Inverting map ! Added new window around map position (-14.4, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125346 Jy ! Component: 100 - total flux cleaned = 0.00118853 Jy ! Component: 150 - total flux cleaned = 0.00135138 Jy ! Component: 200 - total flux cleaned = 0.0015499 Jy ! Total flux subtracted in 200 components = 0.0015499 Jy ! Clean residual min=-0.002249 max=0.002513 Jy/beam ! Clean residual mean=0.000006 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.266038 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 134 components and 0.266038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104924Jy sigma=0.538775 ! Fit after self-cal, rms=0.104924Jy sigma=0.538742 ! Inverting map ! Added new window around map position (5.6, -24.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024587 Jy ! Component: 100 - total flux cleaned = 0.00341954 Jy ! Component: 150 - total flux cleaned = 0.00370868 Jy ! Component: 200 - total flux cleaned = 0.00406761 Jy ! Total flux subtracted in 200 components = 0.00406761 Jy ! Clean residual min=-0.002094 max=0.002108 Jy/beam ! Clean residual mean=0.000005 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.270105 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 148 components and 0.270105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104856Jy sigma=0.537688 ! Fit after self-cal, rms=0.104854Jy sigma=0.537664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104854Jy sigma=0.537664 ! Fit after self-cal, rms=0.105676Jy sigma=0.536124 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9037 mas, bmaj=1.618 mas, bpa=-3.483 degrees ! Estimated noise=0.506236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192329 Jy ! Component: 100 - total flux cleaned = 0.0033325 Jy ! Component: 150 - total flux cleaned = 0.00441948 Jy ! Component: 200 - total flux cleaned = 0.00517068 Jy ! Total flux subtracted in 200 components = 0.00517068 Jy ! Clean residual min=-0.001747 max=0.001933 Jy/beam ! Clean residual mean=0.000002 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.275276 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 161 components and 0.275276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105621Jy sigma=0.535369 ! Fit after self-cal, rms=0.105609Jy sigma=0.535335 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21.4, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164464 Jy ! Component: 100 - total flux cleaned = 0.00213148 Jy ! Component: 150 - total flux cleaned = 0.00259624 Jy ! Component: 200 - total flux cleaned = 0.00302884 Jy ! Total flux subtracted in 200 components = 0.00302884 Jy ! Clean residual min=-0.001668 max=0.001802 Jy/beam ! Clean residual mean=0.000002 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.278305 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 176 components and 0.278305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105561Jy sigma=0.534799 ! Fit after self-cal, rms=0.105557Jy sigma=0.534780 ! Inverting map ! Added new window around map position (-2.8, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135302 Jy ! Component: 100 - total flux cleaned = 0.0018073 Jy ! Component: 150 - total flux cleaned = 0.00218549 Jy ! Component: 200 - total flux cleaned = 0.00247633 Jy ! Total flux subtracted in 200 components = 0.00247633 Jy ! Clean residual min=-0.001646 max=0.001678 Jy/beam ! Clean residual mean=0.000001 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.280781 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 192 components and 0.280781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105529Jy sigma=0.534342 ! Fit after self-cal, rms=0.105526Jy sigma=0.534334 ! Inverting map ! Added new window around map position (22.2, 26.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159175 Jy ! Component: 100 - total flux cleaned = 0.00236864 Jy ! Component: 150 - total flux cleaned = 0.00307645 Jy ! Component: 200 - total flux cleaned = 0.00358464 Jy ! Total flux subtracted in 200 components = 0.00358464 Jy ! Clean residual min=-0.001617 max=0.001502 Jy/beam ! Clean residual mean=0.000002 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.284366 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 216 components and 0.284366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105493Jy sigma=0.533889 ! Fit after self-cal, rms=0.105491Jy sigma=0.533878 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105491Jy sigma=0.533878 ! Fit after self-cal, rms=0.105321Jy sigma=0.533751 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.03 mas, bmaj=2.506 mas, bpa=-1.656 degrees ! Estimated noise=0.656022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159305 Jy ! Component: 100 - total flux cleaned = 0.00280546 Jy ! Component: 150 - total flux cleaned = 0.00372532 Jy ! Component: 200 - total flux cleaned = 0.00454852 Jy ! Total flux subtracted in 200 components = 0.00454852 Jy ! Clean residual min=-0.001802 max=0.001855 Jy/beam ! Clean residual mean=0.000001 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.288914 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 260 components and 0.288914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105303Jy sigma=0.533589 ! Fit after self-cal, rms=0.105297Jy sigma=0.533575 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000815566 Jy ! Component: 100 - total flux cleaned = 0.00137369 Jy ! Component: 150 - total flux cleaned = 0.00192338 Jy ! Component: 200 - total flux cleaned = 0.00234632 Jy ! Total flux subtracted in 200 components = 0.00234632 Jy ! Clean residual min=-0.001728 max=0.001765 Jy/beam ! Clean residual mean=0.000002 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.291261 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 280 components and 0.291261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105288Jy sigma=0.533520 ! Fit after self-cal, rms=0.105287Jy sigma=0.533513 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9027 mas, bmaj=1.617 mas, bpa=-3.399 degrees ! Estimated noise=0.506484 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9027 x 1.617 at -3.399 degrees (North through East) ! Clean map min=-0.0013799 max=0.21222 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7255 mas, bmaj=1.335 mas, bpa=-4.97 degrees ! Estimated noise=0.996333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159496 Jy ! Component: 100 - total flux cleaned = 0.197294 Jy ! Component: 150 - total flux cleaned = 0.213951 Jy ! Component: 200 - total flux cleaned = 0.223923 Jy ! Total flux subtracted in 200 components = 0.223923 Jy ! Clean residual min=-0.004311 max=0.005585 Jy/beam ! Clean residual mean=0.000002 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.223923 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.223923 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9027 mas, bmaj=1.617 mas, bpa=-3.399 degrees ! Estimated noise=0.506484 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107392 Jy ! Component: 100 - total flux cleaned = 0.0185093 Jy ! Component: 150 - total flux cleaned = 0.0246348 Jy ! Component: 200 - total flux cleaned = 0.0296039 Jy ! Total flux subtracted in 200 components = 0.0296039 Jy ! Clean residual min=-0.002506 max=0.003138 Jy/beam ! Clean residual mean=0.000002 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.253527 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 52 components and 0.253527 Jy ! Inverting map ! Added new window around map position (-0.4, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410115 Jy ! Component: 100 - total flux cleaned = 0.00757252 Jy ! Component: 150 - total flux cleaned = 0.0104889 Jy ! Component: 200 - total flux cleaned = 0.0127806 Jy ! Total flux subtracted in 200 components = 0.0127806 Jy ! Clean residual min=-0.002142 max=0.002311 Jy/beam ! Clean residual mean=0.000002 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.266307 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 74 components and 0.266307 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.03 mas, bmaj=2.506 mas, bpa=-1.656 degrees ! Estimated noise=0.656022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423867 Jy ! Component: 100 - total flux cleaned = 0.00747954 Jy ! Component: 150 - total flux cleaned = 0.0101818 Jy ! Component: 200 - total flux cleaned = 0.0121341 Jy ! Total flux subtracted in 200 components = 0.0121341 Jy ! Clean residual min=-0.002237 max=0.002871 Jy/beam ! Clean residual mean=0.000004 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.278441 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022972 Jy ! Component: 100 - total flux cleaned = 0.00341586 Jy ! Component: 150 - total flux cleaned = 0.00461392 Jy ! Component: 200 - total flux cleaned = 0.00562589 Jy ! Total flux subtracted in 200 components = 0.00562589 Jy ! Clean residual min=-0.001852 max=0.001944 Jy/beam ! Clean residual mean=0.000001 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.284067 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 162 components and 0.284067 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9027 mas, bmaj=1.617 mas, bpa=-3.399 degrees ! Estimated noise=0.506484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000364959 Jy ! Component: 100 - total flux cleaned = 0.000217891 Jy ! Component: 150 - total flux cleaned = 0.000347052 Jy ! Component: 200 - total flux cleaned = 0.000524846 Jy ! Total flux subtracted in 200 components = 0.000524846 Jy ! Clean residual min=-0.001667 max=0.001748 Jy/beam ! Clean residual mean=0.000000 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.284592 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 189 components and 0.284592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105373Jy sigma=0.534589 ! Fit after self-cal, rms=0.105368Jy sigma=0.534441 wmodel J2330+3155_X_map.mod ! Writing 189 model components to file: J2330+3155_X_map.mod wobs J2330+3155_X_uvs.fits ! Writing UV FITS file: J2330+3155_X_uvs.fits wwins J2330+3155_X_map.win ! wwins: Wrote 11 windows to J2330+3155_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194532 Jy ! Component: 100 - total flux cleaned = 7.72082e-05 Jy ! Component: 150 - total flux cleaned = 0.000104135 Jy ! Component: 200 - total flux cleaned = 0.000155189 Jy ! Component: 250 - total flux cleaned = 0.000280989 Jy ! Component: 300 - total flux cleaned = 0.000451972 Jy ! Component: 350 - total flux cleaned = 0.000547553 Jy ! Component: 400 - total flux cleaned = 0.000710424 Jy ! Component: 450 - total flux cleaned = 0.000778378 Jy ! Component: 500 - total flux cleaned = 0.000844508 Jy ! Component: 550 - total flux cleaned = 0.000887827 Jy ! Component: 600 - total flux cleaned = 0.000973379 Jy ! Component: 650 - total flux cleaned = 0.0010567 Jy ! Component: 700 - total flux cleaned = 0.0011588 Jy ! Component: 750 - total flux cleaned = 0.00123916 Jy ! Component: 800 - total flux cleaned = 0.00125879 Jy ! Component: 850 - total flux cleaned = 0.00139617 Jy ! Component: 900 - total flux cleaned = 0.00151197 Jy ! Component: 950 - total flux cleaned = 0.00164517 Jy ! Component: 1000 - total flux cleaned = 0.00164477 Jy ! Component: 1050 - total flux cleaned = 0.00170052 Jy ! Component: 1100 - total flux cleaned = 0.00182905 Jy ! Component: 1150 - total flux cleaned = 0.00190112 Jy ! Component: 1200 - total flux cleaned = 0.00188334 Jy ! Component: 1250 - total flux cleaned = 0.00199007 Jy ! Component: 1300 - total flux cleaned = 0.00214774 Jy ! Component: 1350 - total flux cleaned = 0.0021474 Jy ! Component: 1400 - total flux cleaned = 0.00225053 Jy ! Component: 1450 - total flux cleaned = 0.00226751 Jy ! Component: 1500 - total flux cleaned = 0.00231821 Jy ! Component: 1550 - total flux cleaned = 0.00238489 Jy ! Component: 1600 - total flux cleaned = 0.00241787 Jy ! Component: 1650 - total flux cleaned = 0.00248329 Jy ! Component: 1700 - total flux cleaned = 0.0025158 Jy ! Component: 1750 - total flux cleaned = 0.00246765 Jy ! Component: 1800 - total flux cleaned = 0.00254715 Jy ! Component: 1850 - total flux cleaned = 0.00264171 Jy ! Component: 1900 - total flux cleaned = 0.00259493 Jy ! Component: 1950 - total flux cleaned = 0.00262598 Jy ! Component: 2000 - total flux cleaned = 0.00276454 Jy ! Component: 2050 - total flux cleaned = 0.00270326 Jy ! Component: 2100 - total flux cleaned = 0.002688 Jy ! Component: 2150 - total flux cleaned = 0.00268827 Jy ! Component: 2200 - total flux cleaned = 0.00274799 Jy ! Component: 2250 - total flux cleaned = 0.00274791 Jy ! Component: 2300 - total flux cleaned = 0.00277723 Jy ! Component: 2350 - total flux cleaned = 0.00273377 Jy ! Component: 2400 - total flux cleaned = 0.00283485 Jy ! Component: 2450 - total flux cleaned = 0.00283482 Jy ! Component: 2500 - total flux cleaned = 0.00279217 Jy ! Component: 2550 - total flux cleaned = 0.00284895 Jy ! Component: 2600 - total flux cleaned = 0.00293323 Jy ! Component: 2650 - total flux cleaned = 0.0029052 Jy ! Component: 2700 - total flux cleaned = 0.00291918 Jy ! Component: 2750 - total flux cleaned = 0.00290544 Jy ! Component: 2800 - total flux cleaned = 0.00294649 Jy ! Component: 2850 - total flux cleaned = 0.00293278 Jy ! Component: 2900 - total flux cleaned = 0.00297328 Jy ! Component: 2950 - total flux cleaned = 0.00297326 Jy ! Component: 3000 - total flux cleaned = 0.00300007 Jy ! Component: 3050 - total flux cleaned = 0.00302639 Jy ! Component: 3100 - total flux cleaned = 0.00302637 Jy ! Component: 3150 - total flux cleaned = 0.00303944 Jy ! Component: 3200 - total flux cleaned = 0.00309142 Jy ! Component: 3250 - total flux cleaned = 0.00314321 Jy ! Component: 3300 - total flux cleaned = 0.00309184 Jy ! Component: 3350 - total flux cleaned = 0.00311727 Jy ! Component: 3400 - total flux cleaned = 0.00309188 Jy ! Component: 3450 - total flux cleaned = 0.00315513 Jy ! Component: 3500 - total flux cleaned = 0.00316761 Jy ! Component: 3550 - total flux cleaned = 0.00324263 Jy ! Component: 3600 - total flux cleaned = 0.00324245 Jy ! Component: 3650 - total flux cleaned = 0.00321772 Jy ! Component: 3700 - total flux cleaned = 0.0032793 Jy ! Component: 3750 - total flux cleaned = 0.00327927 Jy ! Component: 3800 - total flux cleaned = 0.00326709 Jy ! Component: 3850 - total flux cleaned = 0.00329124 Jy ! Component: 3900 - total flux cleaned = 0.00329135 Jy ! Component: 3950 - total flux cleaned = 0.00326731 Jy ! Component: 4000 - total flux cleaned = 0.00323155 Jy ! Component: 4050 - total flux cleaned = 0.00332652 Jy ! Total flux subtracted in 4096 components = 0.00332651 Jy ! Clean residual min=-0.000670 max=0.000679 Jy/beam ! Clean residual mean=0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.287919 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 516 components and 0.287919 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2330+3155_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9027 x 1.617 at -3.399 degrees (North through East) ! Clean map min=-0.0011354 max=0.21189 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2330+3155_X_map.fits wmodel /image_prod/ug002_uva//J2330+3155_X_map.mod ! Writing 516 model components to file: /image_prod/ug002_uva//J2330+3155_X_map.mod wobs /image_prod/ug002_uva//J2330+3155_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2330+3155_X_uvs.fits wwins /image_prod/ug002_uva//J2330+3155_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J2330+3155_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.211885 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204765 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.289919 0.289919 0.579838 1.15968 2.31935 4.63871 9.27742 18.5548 37.1097 74.2193 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.211 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1034.77 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2330+3155_X_dfm.log closed on Thu Mar 5 06:18:34 2020