! Started logfile: /image_prod/ug002_uva//J2322+0812_X_dfm.log on Thu Mar  5 06:13:41 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /image_prod/ug002_uva//J2322+0812_X_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2322+0812_X_uva.fits
! AN table 1: 60 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.823148 visibilities/baseline/integration-bin.
! Found source: J2322+0812
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 21336 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2322+0812_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 50 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.037901Jy  sigma=9.091435
! Fit after  self-cal, rms=0.755847Jy  sigma=6.669577
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7114 mas, bmaj=3.135 mas, bpa=-18.93 degrees
! Estimated noise=1.04036 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.174756 Jy
! Component: 100  -  total flux cleaned = 0.228274 Jy
! Total flux subtracted in 100 components = 0.228274 Jy
! Clean residual min=-0.012143 max=0.024129 Jy/beam
! Clean residual mean=-0.000030 rms=0.003259 Jy/beam
! Combined flux in latest and established models = 0.228274 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.228274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094867Jy  sigma=0.787221
! Fit after  self-cal, rms=0.094846Jy  sigma=0.786887
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0272102 Jy
! Component: 100  -  total flux cleaned = 0.0433097 Jy
! Total flux subtracted in 100 components = 0.0433097 Jy
! Clean residual min=-0.011902 max=0.020199 Jy/beam
! Clean residual mean=-0.000023 rms=0.002645 Jy/beam
! Combined flux in latest and established models = 0.271583 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 13 components and 0.271583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081885Jy  sigma=0.682788
! Fit after  self-cal, rms=0.081843Jy  sigma=0.682458
! Inverting map 
! Added new window around map position (-2.2, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0200091 Jy
! Component: 100  -  total flux cleaned = 0.0325042 Jy
! Total flux subtracted in 100 components = 0.0325042 Jy
! Clean residual min=-0.009818 max=0.012384 Jy/beam
! Clean residual mean=-0.000016 rms=0.002187 Jy/beam
! Combined flux in latest and established models = 0.304088 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 21 components and 0.304087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074561Jy  sigma=0.620452
! Fit after  self-cal, rms=0.074265Jy  sigma=0.617758
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.917 mas, bmaj=3.166 mas, bpa=-17.89 degrees
! Estimated noise=0.561504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0162131 Jy
! Component: 100  -  total flux cleaned = 0.0270622 Jy
! Component: 150  -  total flux cleaned = 0.0334654 Jy
! Component: 200  -  total flux cleaned = 0.0382856 Jy
! Total flux subtracted in 200 components = 0.0382856 Jy
! Clean residual min=-0.009244 max=0.012777 Jy/beam
! Clean residual mean=-0.000027 rms=0.002385 Jy/beam
! Combined flux in latest and established models = 0.342373 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 50 components and 0.342373 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069306Jy  sigma=0.577718
! Fit after  self-cal, rms=0.069105Jy  sigma=0.576025
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.917 x 3.166 at -17.89 degrees (North through East)
! Clean map  min=-0.0088598  max=0.24217 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.87     KP        1.03     
!   LA        0.97     MK        1.07     NL        1.16     OV        0.93     
!   PT        0.83     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.87     KP        1.03     
!   LA        0.97     MK        1.06     NL        1.16     OV        0.93     
!   PT        0.83     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.90     KP        1.04     
!   LA        0.97     MK        1.05     NL        1.17     OV        0.94     
!   PT        0.83     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.89     KP        1.01     
!   LA        0.98     MK        1.07     NL        1.14     OV        0.93     
!   PT        0.83     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.87     KP        1.03     
!   LA        1.00     MK        1.07     NL        1.17     OV        0.93     
!   PT        0.82     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.89     KP        1.00     
!   LA        0.97     MK        1.07     NL        1.17     OV        0.92     
!   PT        0.85     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.89     KP        1.02     
!   LA        0.99     MK        1.09     NL        1.15     OV        0.93     
!   PT        0.84     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.89     KP        1.03     
!   LA        0.97     MK        1.07     NL        1.15     OV        0.92     
!   PT        0.88     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.89     KP        1.04     
!   LA        0.98     MK        1.06     NL        1.17     OV        0.92     
!   PT        0.83     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.87     KP        1.03     
!   LA        0.98     MK        1.09     NL        1.19     OV        0.92     
!   PT        0.84     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.90     KP        1.04     
!   LA        0.99     MK        1.04     NL        1.14     OV        0.92     
!   PT        0.83     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.92     KP        0.99     
!   LA        1.00     MK        1.08     NL        1.16     OV        0.94     
!   PT        0.82     
! 
! 
! Fit before self-cal, rms=0.069105Jy  sigma=0.576025
! Fit after  self-cal, rms=0.061339Jy  sigma=0.520071
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9287 mas, bmaj=3.158 mas, bpa=-17.57 degrees
! Estimated noise=0.556394 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.4, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114605 Jy
! Component: 100  -  total flux cleaned = 0.0149589 Jy
! Component: 150  -  total flux cleaned = 0.0168344 Jy
! Component: 200  -  total flux cleaned = 0.0178441 Jy
! Total flux subtracted in 200 components = 0.0178441 Jy
! Clean residual min=-0.005476 max=0.005270 Jy/beam
! Clean residual mean=-0.000006 rms=0.001264 Jy/beam
! Combined flux in latest and established models = 0.360217 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 77 components and 0.360217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058739Jy  sigma=0.496859
! Fit after  self-cal, rms=0.058594Jy  sigma=0.494902
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058594Jy  sigma=0.494902
! Fit after  self-cal, rms=0.056974Jy  sigma=0.476916
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9255 mas, bmaj=3.147 mas, bpa=-17.58 degrees
! Estimated noise=0.555222 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000590021 Jy
! Component: 100  -  total flux cleaned = 0.000719322 Jy
! Component: 150  -  total flux cleaned = 0.00213207 Jy
! Component: 200  -  total flux cleaned = 0.00321158 Jy
! Total flux subtracted in 200 components = 0.00321158 Jy
! Clean residual min=-0.003620 max=0.003656 Jy/beam
! Clean residual mean=-0.000008 rms=0.000817 Jy/beam
! Combined flux in latest and established models = 0.363429 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 102 components and 0.363429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056405Jy  sigma=0.471789
! Fit after  self-cal, rms=0.056382Jy  sigma=0.471386
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.2, 8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00373286 Jy
! Component: 100  -  total flux cleaned = 0.00545584 Jy
! Component: 150  -  total flux cleaned = 0.00695216 Jy
! Component: 200  -  total flux cleaned = 0.00837406 Jy
! Total flux subtracted in 200 components = 0.00837406 Jy
! Clean residual min=-0.003223 max=0.003087 Jy/beam
! Clean residual mean=-0.000007 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.371803 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 128 components and 0.371803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056034Jy  sigma=0.468275
! Fit after  self-cal, rms=0.056019Jy  sigma=0.468132
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.056019Jy  sigma=0.468132
! Fit after  self-cal, rms=0.055922Jy  sigma=0.467032
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9256 mas, bmaj=3.145 mas, bpa=-17.53 degrees
! Estimated noise=0.553233 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000470491 Jy
! Component: 100  -  total flux cleaned = 0.000784075 Jy
! Component: 150  -  total flux cleaned = 0.002119 Jy
! Component: 200  -  total flux cleaned = 0.00314559 Jy
! Total flux subtracted in 200 components = 0.00314559 Jy
! Clean residual min=-0.002635 max=0.002474 Jy/beam
! Clean residual mean=-0.000006 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.374949 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 142 components and 0.374949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055710Jy  sigma=0.465210
! Fit after  self-cal, rms=0.055702Jy  sigma=0.465106
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00061868 Jy
! Component: 100  -  total flux cleaned = 0.0016459 Jy
! Component: 150  -  total flux cleaned = 0.0024278 Jy
! Component: 200  -  total flux cleaned = 0.00315273 Jy
! Total flux subtracted in 200 components = 0.00315273 Jy
! Clean residual min=-0.002477 max=0.002345 Jy/beam
! Clean residual mean=-0.000005 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 0.378101 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 149 components and 0.378101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055601Jy  sigma=0.464271
! Fit after  self-cal, rms=0.055595Jy  sigma=0.464233
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055595Jy  sigma=0.464233
! Fit after  self-cal, rms=0.055570Jy  sigma=0.463864
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.078 mas, bmaj=3.271 mas, bpa=-10.14 degrees
! Estimated noise=0.672015 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167247 Jy
! Component: 100  -  total flux cleaned = 0.0030076 Jy
! Component: 150  -  total flux cleaned = 0.00407127 Jy
! Component: 200  -  total flux cleaned = 0.00505186 Jy
! Total flux subtracted in 200 components = 0.00505186 Jy
! Clean residual min=-0.003026 max=0.002820 Jy/beam
! Clean residual mean=-0.000007 rms=0.000707 Jy/beam
! Combined flux in latest and established models = 0.383153 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 181 components and 0.383153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055501Jy  sigma=0.463191
! Fit after  self-cal, rms=0.055495Jy  sigma=0.463126
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000609285 Jy
! Component: 100  -  total flux cleaned = 0.00132042 Jy
! Component: 150  -  total flux cleaned = 0.00193425 Jy
! Component: 200  -  total flux cleaned = 0.0024682 Jy
! Total flux subtracted in 200 components = 0.0024682 Jy
! Clean residual min=-0.002812 max=0.002622 Jy/beam
! Clean residual mean=-0.000006 rms=0.000661 Jy/beam
! Combined flux in latest and established models = 0.385621 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 202 components and 0.385621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055466Jy  sigma=0.462830
! Fit after  self-cal, rms=0.055460Jy  sigma=0.462805
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9253 mas, bmaj=3.143 mas, bpa=-17.5 degrees
! Estimated noise=0.552159 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9253 x 3.143 at -17.5 degrees (North through East)
! Clean map  min=-0.002102  max=0.23995 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7176 mas, bmaj=3.092 mas, bpa=-18.62 degrees
! Estimated noise=1.02875 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172644 Jy
! Component: 100  -  total flux cleaned = 0.223892 Jy
! Component: 150  -  total flux cleaned = 0.251829 Jy
! Component: 200  -  total flux cleaned = 0.27174 Jy
! Total flux subtracted in 200 components = 0.27174 Jy
! Clean residual min=-0.007218 max=0.011435 Jy/beam
! Clean residual mean=-0.000018 rms=0.001741 Jy/beam
! Combined flux in latest and established models = 0.27174 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.27174 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9253 mas, bmaj=3.143 mas, bpa=-17.5 degrees
! Estimated noise=0.552159 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0218746 Jy
! Component: 100  -  total flux cleaned = 0.0373676 Jy
! Component: 150  -  total flux cleaned = 0.0489784 Jy
! Component: 200  -  total flux cleaned = 0.0578704 Jy
! Total flux subtracted in 200 components = 0.0578704 Jy
! Clean residual min=-0.004386 max=0.005163 Jy/beam
! Clean residual mean=-0.000018 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 0.329611 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 33 components and 0.329611 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00692945 Jy
! Component: 100  -  total flux cleaned = 0.0126029 Jy
! Component: 150  -  total flux cleaned = 0.0173991 Jy
! Component: 200  -  total flux cleaned = 0.0215393 Jy
! Total flux subtracted in 200 components = 0.0215393 Jy
! Clean residual min=-0.003246 max=0.002855 Jy/beam
! Clean residual mean=-0.000011 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.35115 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 63 components and 0.35115 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.078 mas, bmaj=3.271 mas, bpa=-10.14 degrees
! Estimated noise=0.672015 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00581806 Jy
! Component: 100  -  total flux cleaned = 0.010303 Jy
! Component: 150  -  total flux cleaned = 0.0139245 Jy
! Component: 200  -  total flux cleaned = 0.0169656 Jy
! Total flux subtracted in 200 components = 0.0169656 Jy
! Clean residual min=-0.002959 max=0.003546 Jy/beam
! Clean residual mean=-0.000014 rms=0.000917 Jy/beam
! Combined flux in latest and established models = 0.368116 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262205 Jy
! Component: 100  -  total flux cleaned = 0.00492099 Jy
! Component: 150  -  total flux cleaned = 0.00697887 Jy
! Component: 200  -  total flux cleaned = 0.00883557 Jy
! Total flux subtracted in 200 components = 0.00883557 Jy
! Clean residual min=-0.002725 max=0.003200 Jy/beam
! Clean residual mean=-0.000010 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.376951 Jy
! Adding 114 model components to the UV plane model.
! The established model now contains 163 components and 0.376951 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9253 mas, bmaj=3.143 mas, bpa=-17.5 degrees
! Estimated noise=0.552159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000913069 Jy
! Component: 100  -  total flux cleaned = 0.00125266 Jy
! Component: 150  -  total flux cleaned = 0.00143454 Jy
! Component: 200  -  total flux cleaned = 0.00186919 Jy
! Total flux subtracted in 200 components = 0.00186919 Jy
! Clean residual min=-0.002279 max=0.002347 Jy/beam
! Clean residual mean=-0.000004 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.37882 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 202 components and 0.37882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.055510Jy  sigma=0.463344
! Fit after  self-cal, rms=0.055462Jy  sigma=0.463039
wmodel J2322+0812_X_map.mod
! Writing 202 model components to file: J2322+0812_X_map.mod
wobs   J2322+0812_X_uvs.fits
! Writing UV FITS file: J2322+0812_X_uvs.fits
wwins  J2322+0812_X_map.win
! wwins: Wrote 4 windows to J2322+0812_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000106052 Jy
! Component: 100  -  total flux cleaned = 0.000359717 Jy
! Component: 150  -  total flux cleaned = 0.000495751 Jy
! Component: 200  -  total flux cleaned = 0.000659196 Jy
! Component: 250  -  total flux cleaned = 0.000752013 Jy
! Component: 300  -  total flux cleaned = 0.00101699 Jy
! Component: 350  -  total flux cleaned = 0.00121575 Jy
! Component: 400  -  total flux cleaned = 0.00143584 Jy
! Component: 450  -  total flux cleaned = 0.0017027 Jy
! Component: 500  -  total flux cleaned = 0.0019365 Jy
! Component: 550  -  total flux cleaned = 0.00213905 Jy
! Component: 600  -  total flux cleaned = 0.00241045 Jy
! Component: 650  -  total flux cleaned = 0.00250788 Jy
! Component: 700  -  total flux cleaned = 0.00279077 Jy
! Component: 750  -  total flux cleaned = 0.00297444 Jy
! Component: 800  -  total flux cleaned = 0.00315412 Jy
! Component: 850  -  total flux cleaned = 0.00326389 Jy
! Component: 900  -  total flux cleaned = 0.00335 Jy
! Component: 950  -  total flux cleaned = 0.00339183 Jy
! Component: 1000  -  total flux cleaned = 0.00345393 Jy
! Component: 1050  -  total flux cleaned = 0.00353532 Jy
! Component: 1100  -  total flux cleaned = 0.00365409 Jy
! Component: 1150  -  total flux cleaned = 0.00363432 Jy
! Component: 1200  -  total flux cleaned = 0.00373032 Jy
! Component: 1250  -  total flux cleaned = 0.00371123 Jy
! Component: 1300  -  total flux cleaned = 0.00378582 Jy
! Component: 1350  -  total flux cleaned = 0.00382226 Jy
! Component: 1400  -  total flux cleaned = 0.00387583 Jy
! Component: 1450  -  total flux cleaned = 0.00394614 Jy
! Component: 1500  -  total flux cleaned = 0.00394587 Jy
! Component: 1550  -  total flux cleaned = 0.00398023 Jy
! Component: 1600  -  total flux cleaned = 0.00404741 Jy
! Component: 1650  -  total flux cleaned = 0.0040802 Jy
! Component: 1700  -  total flux cleaned = 0.00408029 Jy
! Component: 1750  -  total flux cleaned = 0.00414461 Jy
! Component: 1800  -  total flux cleaned = 0.00412851 Jy
! Component: 1850  -  total flux cleaned = 0.00416007 Jy
! Component: 1900  -  total flux cleaned = 0.0041756 Jy
! Component: 1950  -  total flux cleaned = 0.00414506 Jy
! Component: 2000  -  total flux cleaned = 0.00416017 Jy
! Component: 2050  -  total flux cleaned = 0.00420493 Jy
! Component: 2100  -  total flux cleaned = 0.00417543 Jy
! Component: 2150  -  total flux cleaned = 0.00417545 Jy
! Component: 2200  -  total flux cleaned = 0.00423304 Jy
! Component: 2250  -  total flux cleaned = 0.00427603 Jy
! Component: 2300  -  total flux cleaned = 0.00427606 Jy
! Component: 2350  -  total flux cleaned = 0.00431784 Jy
! Component: 2400  -  total flux cleaned = 0.00430389 Jy
! Component: 2450  -  total flux cleaned = 0.00430389 Jy
! Component: 2500  -  total flux cleaned = 0.00438499 Jy
! Component: 2550  -  total flux cleaned = 0.00441177 Jy
! Component: 2600  -  total flux cleaned = 0.00442502 Jy
! Component: 2650  -  total flux cleaned = 0.00441189 Jy
! Component: 2700  -  total flux cleaned = 0.00446383 Jy
! Component: 2750  -  total flux cleaned = 0.00448934 Jy
! Component: 2800  -  total flux cleaned = 0.00446385 Jy
! Component: 2850  -  total flux cleaned = 0.0044514 Jy
! Component: 2900  -  total flux cleaned = 0.00441396 Jy
! Component: 2950  -  total flux cleaned = 0.00446341 Jy
! Component: 3000  -  total flux cleaned = 0.00443907 Jy
! Component: 3050  -  total flux cleaned = 0.00446342 Jy
! Component: 3100  -  total flux cleaned = 0.00439108 Jy
! Component: 3150  -  total flux cleaned = 0.00440291 Jy
! Component: 3200  -  total flux cleaned = 0.00432009 Jy
! Component: 3250  -  total flux cleaned = 0.00428514 Jy
! Component: 3300  -  total flux cleaned = 0.00427352 Jy
! Component: 3350  -  total flux cleaned = 0.00422731 Jy
! Component: 3400  -  total flux cleaned = 0.00423889 Jy
! Component: 3450  -  total flux cleaned = 0.00421612 Jy
! Component: 3500  -  total flux cleaned = 0.00419353 Jy
! Component: 3550  -  total flux cleaned = 0.00418228 Jy
! Component: 3600  -  total flux cleaned = 0.0041602 Jy
! Component: 3650  -  total flux cleaned = 0.00413816 Jy
! Component: 3700  -  total flux cleaned = 0.00410552 Jy
! Component: 3750  -  total flux cleaned = 0.00413808 Jy
! Component: 3800  -  total flux cleaned = 0.00409507 Jy
! Component: 3850  -  total flux cleaned = 0.00407385 Jy
! Component: 3900  -  total flux cleaned = 0.0040951 Jy
! Component: 3950  -  total flux cleaned = 0.00406349 Jy
! Component: 4000  -  total flux cleaned = 0.0040426 Jy
! Component: 4050  -  total flux cleaned = 0.00400121 Jy
! Total flux subtracted in 4096 components = 0.0040424 Jy
! Clean residual min=-0.000656 max=0.000582 Jy/beam
! Clean residual mean=-0.000001 rms=0.000192 Jy/beam
! Combined flux in latest and established models = 0.382863 Jy
keep
! Adding 336 model components to the UV plane model.
! The established model now contains 538 components and 0.382863 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2322+0812_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9253 x 3.143 at -17.5 degrees (North through East)
! Clean map  min=-0.001422  max=0.23964 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2322+0812_X_map.fits
wmodel /image_prod/ug002_uva//J2322+0812_X_map.mod
! Writing 538 model components to file: /image_prod/ug002_uva//J2322+0812_X_map.mod
wobs   /image_prod/ug002_uva//J2322+0812_X_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2322+0812_X_uvs.fits
wwins  /image_prod/ug002_uva//J2322+0812_X_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J2322+0812_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.239641 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000189449 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.237166 0.237166 0.474333 0.948665 1.89733 3.79466 7.58932 15.1786 30.3573 60.7146
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.239 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1264.94 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2322+0812_X_dfm.log closed on Thu Mar  5 06:13:46 2020