! Started logfile: /image_prod/ug002_uva//J2321-0827_S_dfm.log on Thu Mar  5 06:13:26 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2321-0827_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2321-0827_S_uva.fits
! AN table 1: 75 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.894762 visibilities/baseline/integration-bin.
! Found source: J2321-0827
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 36 lines of history.
! 
! Reading 5637 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2321-0827_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.027782Jy  sigma=7.217136
! Fit after  self-cal, rms=0.816267Jy  sigma=5.673521
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.496 mas, bmaj=7.049 mas, bpa=-6.491 degrees
! Estimated noise=1.91737 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146875 Jy
! Component: 100  -  total flux cleaned = 0.178928 Jy
! Total flux subtracted in 100 components = 0.178928 Jy
! Clean residual min=-0.009660 max=0.011777 Jy/beam
! Clean residual mean=-0.000007 rms=0.002558 Jy/beam
! Combined flux in latest and established models = 0.178928 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.178928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086653Jy  sigma=0.513122
! Fit after  self-cal, rms=0.086632Jy  sigma=0.513063
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.851 mas, bmaj=7.823 mas, bpa=-6.262 degrees
! Estimated noise=1.40209 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132403 Jy
! Component: 100  -  total flux cleaned = 0.0210598 Jy
! Component: 150  -  total flux cleaned = 0.0262425 Jy
! Component: 200  -  total flux cleaned = 0.0297739 Jy
! Total flux subtracted in 200 components = 0.0297739 Jy
! Clean residual min=-0.011298 max=0.009568 Jy/beam
! Clean residual mean=-0.000007 rms=0.002318 Jy/beam
! Combined flux in latest and established models = 0.208702 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 36 components and 0.208702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085474Jy  sigma=0.488450
! Fit after  self-cal, rms=0.085420Jy  sigma=0.488378
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.851 x 7.823 at -6.262 degrees (North through East)
! Clean map  min=-0.010914  max=0.18842 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.96     HN        0.99     KP        1.02     
!   MK        1.06     NL        0.93     OV        0.95     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.97     HN        1.04     KP        1.00     
!   MK        1.09     NL        1.12     OV        0.94     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        0.95     HN        0.98     KP        1.00     
!   MK        1.07     NL        0.85     OV        1.05     SC        0.91     
! 
! 
! Fit before self-cal, rms=0.085420Jy  sigma=0.488378
! Fit after  self-cal, rms=0.086468Jy  sigma=0.470677
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.887 mas, bmaj=7.849 mas, bpa=-5.565 degrees
! Estimated noise=1.39344 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00195921 Jy
! Component: 100  -  total flux cleaned = -0.00205084 Jy
! Component: 150  -  total flux cleaned = -0.00220591 Jy
! Component: 200  -  total flux cleaned = -0.00234557 Jy
! Total flux subtracted in 200 components = -0.00234557 Jy
! Clean residual min=-0.010618 max=0.007682 Jy/beam
! Clean residual mean=-0.000005 rms=0.002099 Jy/beam
! Combined flux in latest and established models = 0.206356 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 43 components and 0.206356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086160Jy  sigma=0.469780
! Fit after  self-cal, rms=0.086189Jy  sigma=0.469661
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086189Jy  sigma=0.469661
! Fit after  self-cal, rms=0.109422Jy  sigma=0.424981
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.869 mas, bmaj=7.782 mas, bpa=-5.595 degrees
! Estimated noise=1.39118 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000404228 Jy
! Component: 100  -  total flux cleaned = 0.000462477 Jy
! Component: 150  -  total flux cleaned = 0.000519237 Jy
! Component: 200  -  total flux cleaned = 0.00059897 Jy
! Total flux subtracted in 200 components = 0.00059897 Jy
! Clean residual min=-0.003185 max=0.004655 Jy/beam
! Clean residual mean=-0.000004 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.206955 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 55 components and 0.206955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109406Jy  sigma=0.424821
! Fit after  self-cal, rms=0.109969Jy  sigma=0.424615
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.5, 3.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00460274 Jy
! Component: 100  -  total flux cleaned = 0.00656735 Jy
! Component: 150  -  total flux cleaned = 0.00718303 Jy
! Component: 200  -  total flux cleaned = 0.00744492 Jy
! Total flux subtracted in 200 components = 0.00744492 Jy
! Clean residual min=-0.002814 max=0.002694 Jy/beam
! Clean residual mean=-0.000003 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.2144 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 81 components and 0.2144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109788Jy  sigma=0.422052
! Fit after  self-cal, rms=0.109805Jy  sigma=0.421776
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109805Jy  sigma=0.421776
! Fit after  self-cal, rms=0.109781Jy  sigma=0.420847
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.864 mas, bmaj=7.767 mas, bpa=-5.622 degrees
! Estimated noise=1.38669 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0019353 Jy
! Component: 100  -  total flux cleaned = 0.00240688 Jy
! Component: 150  -  total flux cleaned = 0.00287761 Jy
! Component: 200  -  total flux cleaned = 0.00304776 Jy
! Total flux subtracted in 200 components = 0.00304776 Jy
! Clean residual min=-0.002579 max=0.002250 Jy/beam
! Clean residual mean=-0.000001 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.217448 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 97 components and 0.217448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109741Jy  sigma=0.420299
! Fit after  self-cal, rms=0.109760Jy  sigma=0.420246
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000548207 Jy
! Component: 100  -  total flux cleaned = 0.000607188 Jy
! Component: 150  -  total flux cleaned = 0.000660034 Jy
! Component: 200  -  total flux cleaned = 0.000658341 Jy
! Total flux subtracted in 200 components = 0.000658341 Jy
! Clean residual min=-0.002597 max=0.002233 Jy/beam
! Clean residual mean=-0.000001 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.218106 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 108 components and 0.218106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109752Jy  sigma=0.420084
! Fit after  self-cal, rms=0.109754Jy  sigma=0.420077
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.109754Jy  sigma=0.420077
! Fit after  self-cal, rms=0.108401Jy  sigma=0.419992
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.336 mas, bmaj=11.87 mas, bpa=-2.586 degrees
! Estimated noise=1.83307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107724 Jy
! Component: 100  -  total flux cleaned = 0.00140586 Jy
! Component: 150  -  total flux cleaned = 0.00170493 Jy
! Component: 200  -  total flux cleaned = 0.0019655 Jy
! Total flux subtracted in 200 components = 0.0019655 Jy
! Clean residual min=-0.003121 max=0.002512 Jy/beam
! Clean residual mean=-0.000003 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.220071 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 122 components and 0.220071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108422Jy  sigma=0.419977
! Fit after  self-cal, rms=0.108420Jy  sigma=0.419950
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000328691 Jy
! Component: 100  -  total flux cleaned = 0.000346276 Jy
! Component: 150  -  total flux cleaned = 0.000362025 Jy
! Component: 200  -  total flux cleaned = 0.000349621 Jy
! Total flux subtracted in 200 components = 0.000349621 Jy
! Clean residual min=-0.003055 max=0.002543 Jy/beam
! Clean residual mean=-0.000003 rms=0.000797 Jy/beam
! Combined flux in latest and established models = 0.220421 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 130 components and 0.220421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108434Jy  sigma=0.419979
! Fit after  self-cal, rms=0.108438Jy  sigma=0.419970
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.861 mas, bmaj=7.755 mas, bpa=-5.608 degrees
! Estimated noise=1.38485 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.861 x 7.755 at -5.608 degrees (North through East)
! Clean map  min=-0.0024422  max=0.18611 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.497 mas, bmaj=6.95 mas, bpa=-5.663 degrees
! Estimated noise=1.89378 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.145002 Jy
! Component: 100  -  total flux cleaned = 0.176718 Jy
! Component: 150  -  total flux cleaned = 0.186656 Jy
! Component: 200  -  total flux cleaned = 0.192848 Jy
! Total flux subtracted in 200 components = 0.192848 Jy
! Clean residual min=-0.003889 max=0.003615 Jy/beam
! Clean residual mean=-0.000003 rms=0.000954 Jy/beam
! Combined flux in latest and established models = 0.192848 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.192848 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.861 mas, bmaj=7.755 mas, bpa=-5.608 degrees
! Estimated noise=1.38485 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00681461 Jy
! Component: 100  -  total flux cleaned = 0.0111729 Jy
! Component: 150  -  total flux cleaned = 0.0144488 Jy
! Component: 200  -  total flux cleaned = 0.0170372 Jy
! Total flux subtracted in 200 components = 0.0170372 Jy
! Clean residual min=-0.002962 max=0.002573 Jy/beam
! Clean residual mean=-0.000003 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.209885 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 78 components and 0.209885 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.336 mas, bmaj=11.87 mas, bpa=-2.586 degrees
! Estimated noise=1.83307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00390792 Jy
! Component: 100  -  total flux cleaned = 0.00616876 Jy
! Component: 150  -  total flux cleaned = 0.00725896 Jy
! Component: 200  -  total flux cleaned = 0.00809144 Jy
! Total flux subtracted in 200 components = 0.00809144 Jy
! Clean residual min=-0.003455 max=0.002625 Jy/beam
! Clean residual mean=-0.000004 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.217976 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000642239 Jy
! Component: 100  -  total flux cleaned = 0.00111291 Jy
! Component: 150  -  total flux cleaned = 0.00146287 Jy
! Component: 200  -  total flux cleaned = 0.00174423 Jy
! Total flux subtracted in 200 components = 0.00174423 Jy
! Clean residual min=-0.003131 max=0.002526 Jy/beam
! Clean residual mean=-0.000003 rms=0.000801 Jy/beam
! Combined flux in latest and established models = 0.219721 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 135 components and 0.219721 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.861 mas, bmaj=7.755 mas, bpa=-5.608 degrees
! Estimated noise=1.38485 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000344672 Jy
! Component: 100  -  total flux cleaned = -0.000492174 Jy
! Component: 150  -  total flux cleaned = -0.000595601 Jy
! Component: 200  -  total flux cleaned = -0.000617782 Jy
! Total flux subtracted in 200 components = -0.000617782 Jy
! Clean residual min=-0.002561 max=0.002177 Jy/beam
! Clean residual mean=-0.000001 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.219103 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 147 components and 0.219103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.108403Jy  sigma=0.419774
! Fit after  self-cal, rms=0.108426Jy  sigma=0.419742
wmodel J2321-0827_S_map.mod
! Writing 147 model components to file: J2321-0827_S_map.mod
wobs   J2321-0827_S_uvs.fits
! Writing UV FITS file: J2321-0827_S_uvs.fits
wwins  J2321-0827_S_map.win
! wwins: Wrote 2 windows to J2321-0827_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00105054 Jy
! Component: 100  -  total flux cleaned = -0.00133239 Jy
! Component: 150  -  total flux cleaned = -0.00155786 Jy
! Component: 200  -  total flux cleaned = -0.00170188 Jy
! Component: 250  -  total flux cleaned = -0.0018385 Jy
! Component: 300  -  total flux cleaned = -0.00200169 Jy
! Component: 350  -  total flux cleaned = -0.00206502 Jy
! Component: 400  -  total flux cleaned = -0.00218801 Jy
! Component: 450  -  total flux cleaned = -0.00221859 Jy
! Component: 500  -  total flux cleaned = -0.00230644 Jy
! Component: 550  -  total flux cleaned = -0.00241928 Jy
! Component: 600  -  total flux cleaned = -0.00247464 Jy
! Component: 650  -  total flux cleaned = -0.00263589 Jy
! Component: 700  -  total flux cleaned = -0.00276726 Jy
! Component: 750  -  total flux cleaned = -0.00287063 Jy
! Component: 800  -  total flux cleaned = -0.00302157 Jy
! Component: 850  -  total flux cleaned = -0.00312035 Jy
! Component: 900  -  total flux cleaned = -0.00328929 Jy
! Component: 950  -  total flux cleaned = -0.0032894 Jy
! Component: 1000  -  total flux cleaned = -0.00345219 Jy
! Component: 1050  -  total flux cleaned = -0.00352023 Jy
! Component: 1100  -  total flux cleaned = -0.00365455 Jy
! Component: 1150  -  total flux cleaned = -0.00376479 Jy
! Component: 1200  -  total flux cleaned = -0.00391593 Jy
! Component: 1250  -  total flux cleaned = -0.00397978 Jy
! Component: 1300  -  total flux cleaned = -0.0040426 Jy
! Component: 1350  -  total flux cleaned = -0.00410431 Jy
! Component: 1400  -  total flux cleaned = -0.00410437 Jy
! Component: 1450  -  total flux cleaned = -0.00412463 Jy
! Component: 1500  -  total flux cleaned = -0.00416442 Jy
! Component: 1550  -  total flux cleaned = -0.00426176 Jy
! Component: 1600  -  total flux cleaned = -0.00426181 Jy
! Component: 1650  -  total flux cleaned = -0.00428085 Jy
! Component: 1700  -  total flux cleaned = -0.00429965 Jy
! Component: 1750  -  total flux cleaned = -0.0042995 Jy
! Component: 1800  -  total flux cleaned = -0.00431764 Jy
! Component: 1850  -  total flux cleaned = -0.00433537 Jy
! Component: 1900  -  total flux cleaned = -0.00433516 Jy
! Component: 1950  -  total flux cleaned = -0.00426527 Jy
! Component: 2000  -  total flux cleaned = -0.00430005 Jy
! Component: 2050  -  total flux cleaned = -0.00433427 Jy
! Component: 2100  -  total flux cleaned = -0.00433411 Jy
! Component: 2150  -  total flux cleaned = -0.00433404 Jy
! Component: 2200  -  total flux cleaned = -0.00431744 Jy
! Component: 2250  -  total flux cleaned = -0.00430122 Jy
! Component: 2300  -  total flux cleaned = -0.0043014 Jy
! Component: 2350  -  total flux cleaned = -0.00431744 Jy
! Component: 2400  -  total flux cleaned = -0.00433317 Jy
! Component: 2450  -  total flux cleaned = -0.00428622 Jy
! Component: 2500  -  total flux cleaned = -0.00423971 Jy
! Component: 2550  -  total flux cleaned = -0.004209 Jy
! Component: 2600  -  total flux cleaned = -0.00419396 Jy
! Component: 2650  -  total flux cleaned = -0.00414906 Jy
! Component: 2700  -  total flux cleaned = -0.00419371 Jy
! Component: 2750  -  total flux cleaned = -0.0041054 Jy
! Component: 2800  -  total flux cleaned = -0.00406184 Jy
! Component: 2850  -  total flux cleaned = -0.00401842 Jy
! Component: 2900  -  total flux cleaned = -0.00398968 Jy
! Component: 2950  -  total flux cleaned = -0.00391875 Jy
! Component: 3000  -  total flux cleaned = -0.00389081 Jy
! Component: 3050  -  total flux cleaned = -0.00387687 Jy
! Component: 3100  -  total flux cleaned = -0.00382182 Jy
! Component: 3150  -  total flux cleaned = -0.00382197 Jy
! Component: 3200  -  total flux cleaned = -0.00376806 Jy
! Component: 3250  -  total flux cleaned = -0.00378162 Jy
! Component: 3300  -  total flux cleaned = -0.00374196 Jy
! Component: 3350  -  total flux cleaned = -0.00371558 Jy
! Component: 3400  -  total flux cleaned = -0.00363734 Jy
! Component: 3450  -  total flux cleaned = -0.00366314 Jy
! Component: 3500  -  total flux cleaned = -0.0035863 Jy
! Component: 3550  -  total flux cleaned = -0.00357363 Jy
! Component: 3600  -  total flux cleaned = -0.00354843 Jy
! Component: 3650  -  total flux cleaned = -0.00353576 Jy
! Component: 3700  -  total flux cleaned = -0.00346121 Jy
! Component: 3750  -  total flux cleaned = -0.00339982 Jy
! Component: 3800  -  total flux cleaned = -0.00335117 Jy
! Component: 3850  -  total flux cleaned = -0.00332713 Jy
! Component: 3900  -  total flux cleaned = -0.00331521 Jy
! Component: 3950  -  total flux cleaned = -0.00327942 Jy
! Component: 4000  -  total flux cleaned = -0.00331499 Jy
! Component: 4050  -  total flux cleaned = -0.0033268 Jy
! Total flux subtracted in 4096 components = -0.0032568 Jy
! Clean residual min=-0.000685 max=0.000718 Jy/beam
! Clean residual mean=-0.000001 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.215846 Jy
keep
! Adding 306 model components to the UV plane model.
! The established model now contains 453 components and 0.215846 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2321-0827_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.861 x 7.755 at -5.608 degrees (North through East)
! Clean map  min=-0.0018141  max=0.18776 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2321-0827_S_map.fits
wmodel /image_prod/ug002_uva//J2321-0827_S_map.mod
! Writing 453 model components to file: /image_prod/ug002_uva//J2321-0827_S_map.mod
wobs   /image_prod/ug002_uva//J2321-0827_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2321-0827_S_uvs.fits
wwins  /image_prod/ug002_uva//J2321-0827_S_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J2321-0827_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.187762 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000210316 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.336036 0.336036 0.672072 1.34414 2.68829 5.37658 10.7532 21.5063 43.0126 86.0252
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.187 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  892.761 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2321-0827_S_dfm.log closed on Thu Mar  5 06:13:30 2020