! Started logfile: /image_prod/ug002_uva//J2320+0513_X_h_dfm.log on Thu Mar 5 06:12:33 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2320+0513_X_h_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2320+0513_X_h_uva.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.826389 visibilities/baseline/integration-bin. ! Found source: J2320+0513 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5712 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2320+0513_X_h] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.263254Jy sigma=8.913401 ! Fit after self-cal, rms=0.405008Jy sigma=3.321810 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5972 mas, bmaj=1.729 mas, bpa=4.137 degrees ! Estimated noise=1.83553 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.478945 Jy ! Component: 100 - total flux cleaned = 0.686148 Jy ! Total flux subtracted in 100 components = 0.686148 Jy ! Clean residual min=-0.045649 max=0.094277 Jy/beam ! Clean residual mean=-0.000025 rms=0.008971 Jy/beam ! Combined flux in latest and established models = 0.686149 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.686149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.178872Jy sigma=1.218727 ! Fit after self-cal, rms=0.177683Jy sigma=1.209946 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104451 Jy ! Component: 100 - total flux cleaned = 0.159421 Jy ! Total flux subtracted in 100 components = 0.159421 Jy ! Clean residual min=-0.019758 max=0.027209 Jy/beam ! Clean residual mean=-0.000007 rms=0.003256 Jy/beam ! Combined flux in latest and established models = 0.84557 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 11 components and 0.84557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077411Jy sigma=0.562203 ! Fit after self-cal, rms=0.077135Jy sigma=0.560295 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311933 Jy ! Component: 100 - total flux cleaned = 0.0489595 Jy ! Total flux subtracted in 100 components = 0.0489595 Jy ! Clean residual min=-0.014489 max=0.010847 Jy/beam ! Clean residual mean=-0.000001 rms=0.001982 Jy/beam ! Combined flux in latest and established models = 0.894529 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 14 components and 0.894529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063898Jy sigma=0.476075 ! Fit after self-cal, rms=0.063860Jy sigma=0.475749 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7329 mas, bmaj=1.881 mas, bpa=4.361 degrees ! Estimated noise=1.34679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0007268 Jy ! Component: 100 - total flux cleaned = 0.00121865 Jy ! Component: 150 - total flux cleaned = 0.00101333 Jy ! Component: 200 - total flux cleaned = 0.000845413 Jy ! Total flux subtracted in 200 components = 0.000845413 Jy ! Clean residual min=-0.007563 max=0.006694 Jy/beam ! Clean residual mean=-0.000002 rms=0.001338 Jy/beam ! Combined flux in latest and established models = 0.895374 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.895374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062325Jy sigma=0.464066 ! Fit after self-cal, rms=0.062318Jy sigma=0.463707 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7329 x 1.881 at 4.361 degrees (North through East) ! Clean map min=-0.0056182 max=0.64249 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 KP 1.01 LA 1.02 ! MK 0.98 NL 0.98 OV 1.01 PT 0.97 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 KP 1.01 LA 1.03 ! MK 0.97 NL 0.99 OV 1.00 PT 0.97 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 KP 1.00 LA 1.03 ! MK 0.99 NL 1.03 OV 1.01 PT 0.96 ! SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 KP 1.01 LA 1.03 ! MK 1.01 NL 0.98 OV 1.03 PT 0.98 ! SC 0.94 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 KP 1.00 LA 1.03 ! MK 0.97 NL 0.98 OV 1.01 PT 0.98 ! SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 KP 1.02 LA 1.02 ! MK 0.97 NL 1.00 OV 1.02 PT 0.99 ! SC 0.94 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 KP 1.02 LA 1.02 ! MK 0.99 NL 1.01 OV 1.01 PT 0.99 ! SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 KP 1.01 LA 1.02 ! MK 1.01 NL 1.03 OV 0.98 PT 0.99 ! SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 KP 1.02 LA 1.00 ! MK 1.00 NL 1.00 OV 1.01 PT 1.01 ! SC 0.95 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 KP 0.99 LA 1.01 ! MK 1.00 NL 0.98 OV 1.02 PT 0.99 ! SC 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 KP 0.99 LA 1.01 ! MK 0.97 NL 1.04 OV 1.02 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 KP 1.02 LA 1.02 ! MK 0.99 NL 1.01 OV 1.01 PT 0.97 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.062318Jy sigma=0.463707 ! Fit after self-cal, rms=0.058222Jy sigma=0.441291 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7263 mas, bmaj=1.872 mas, bpa=4.616 degrees ! Estimated noise=1.3293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483731 Jy ! Component: 100 - total flux cleaned = 0.00484357 Jy ! Component: 150 - total flux cleaned = 0.00452877 Jy ! Component: 200 - total flux cleaned = 0.00452349 Jy ! Total flux subtracted in 200 components = 0.00452349 Jy ! Clean residual min=-0.004140 max=0.004542 Jy/beam ! Clean residual mean=-0.000000 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.899898 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.899898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057296Jy sigma=0.432838 ! Fit after self-cal, rms=0.057256Jy sigma=0.432581 ! Inverting map ! Added new window around map position (1.8, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030115 Jy ! Component: 100 - total flux cleaned = 0.00325925 Jy ! Component: 150 - total flux cleaned = 0.00347081 Jy ! Component: 200 - total flux cleaned = 0.0033691 Jy ! Total flux subtracted in 200 components = 0.0033691 Jy ! Clean residual min=-0.003441 max=0.003418 Jy/beam ! Clean residual mean=-0.000000 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.903267 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 0.903267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056814Jy sigma=0.428831 ! Fit after self-cal, rms=0.056805Jy sigma=0.428768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056805Jy sigma=0.428768 ! Fit after self-cal, rms=0.056365Jy sigma=0.425707 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7257 mas, bmaj=1.871 mas, bpa=4.657 degrees ! Estimated noise=1.32808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146381 Jy ! Component: 100 - total flux cleaned = 0.00197176 Jy ! Component: 150 - total flux cleaned = 0.00190166 Jy ! Component: 200 - total flux cleaned = 0.00197327 Jy ! Total flux subtracted in 200 components = 0.00197327 Jy ! Clean residual min=-0.002545 max=0.003063 Jy/beam ! Clean residual mean=0.000001 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.90524 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 57 components and 0.90524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056186Jy sigma=0.424152 ! Fit after self-cal, rms=0.056178Jy sigma=0.424116 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, 16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204535 Jy ! Component: 100 - total flux cleaned = 0.00226365 Jy ! Component: 150 - total flux cleaned = 0.00244811 Jy ! Component: 200 - total flux cleaned = 0.00267671 Jy ! Total flux subtracted in 200 components = 0.00267671 Jy ! Clean residual min=-0.002419 max=0.002618 Jy/beam ! Clean residual mean=0.000001 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.907917 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 77 components and 0.907917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056012Jy sigma=0.422763 ! Fit after self-cal, rms=0.056013Jy sigma=0.422731 ! Inverting map ! Added new window around map position (9.2, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204436 Jy ! Component: 100 - total flux cleaned = 0.00279032 Jy ! Component: 150 - total flux cleaned = 0.00309804 Jy ! Component: 200 - total flux cleaned = 0.00343024 Jy ! Total flux subtracted in 200 components = 0.00343024 Jy ! Clean residual min=-0.002206 max=0.002195 Jy/beam ! Clean residual mean=0.000001 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.911347 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 92 components and 0.911347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055897Jy sigma=0.421864 ! Fit after self-cal, rms=0.055891Jy sigma=0.421847 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055891Jy sigma=0.421847 ! Fit after self-cal, rms=0.055822Jy sigma=0.420973 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7254 mas, bmaj=1.87 mas, bpa=4.678 degrees ! Estimated noise=1.32737 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000739352 Jy ! Component: 100 - total flux cleaned = 0.00118611 Jy ! Component: 150 - total flux cleaned = 0.0013911 Jy ! Component: 200 - total flux cleaned = 0.00154627 Jy ! Total flux subtracted in 200 components = 0.00154627 Jy ! Clean residual min=-0.002181 max=0.002023 Jy/beam ! Clean residual mean=0.000001 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.912893 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 0.912893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055768Jy sigma=0.420517 ! Fit after self-cal, rms=0.055768Jy sigma=0.420509 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002387 Jy ! Component: 100 - total flux cleaned = 0.000379963 Jy ! Component: 150 - total flux cleaned = 0.000481164 Jy ! Component: 200 - total flux cleaned = 0.000545539 Jy ! Total flux subtracted in 200 components = 0.000545539 Jy ! Clean residual min=-0.002128 max=0.002003 Jy/beam ! Clean residual mean=0.000001 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.913439 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 111 components and 0.913439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055736Jy sigma=0.420237 ! Fit after self-cal, rms=0.055736Jy sigma=0.420234 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055736Jy sigma=0.420234 ! Fit after self-cal, rms=0.055719Jy sigma=0.420207 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.16 mas, bmaj=3.054 mas, bpa=3.272 degrees ! Estimated noise=2.03432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.3359e-05 Jy ! Component: 100 - total flux cleaned = -0.000296485 Jy ! Component: 150 - total flux cleaned = -0.000345043 Jy ! Component: 200 - total flux cleaned = -0.00032425 Jy ! Total flux subtracted in 200 components = -0.00032425 Jy ! Clean residual min=-0.001859 max=0.002126 Jy/beam ! Clean residual mean=0.000003 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.913114 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 126 components and 0.913114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055708Jy sigma=0.420167 ! Fit after self-cal, rms=0.055708Jy sigma=0.420163 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010944 Jy ! Component: 100 - total flux cleaned = 0.000146074 Jy ! Component: 150 - total flux cleaned = 0.000162374 Jy ! Component: 200 - total flux cleaned = 0.000146783 Jy ! Total flux subtracted in 200 components = 0.000146783 Jy ! Clean residual min=-0.001899 max=0.002112 Jy/beam ! Clean residual mean=0.000003 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.913261 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 136 components and 0.913261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055705Jy sigma=0.420150 ! Fit after self-cal, rms=0.055706Jy sigma=0.420146 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7251 mas, bmaj=1.87 mas, bpa=4.69 degrees ! Estimated noise=1.32704 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7251 x 1.87 at 4.69 degrees (North through East) ! Clean map min=-0.0033918 max=0.63432 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055706Jy sigma=0.420146 ! Fit after self-cal, rms=0.052518Jy sigma=0.380841 ! Inverting map and beam ! Estimated beam: bmin=0.7255 mas, bmaj=1.87 mas, bpa=4.706 degrees ! Estimated noise=1.32753 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627961 Jy ! Component: 100 - total flux cleaned = 0.000729602 Jy ! Component: 150 - total flux cleaned = 0.000908877 Jy ! Component: 200 - total flux cleaned = 0.00110481 Jy ! Total flux subtracted in 200 components = 0.00110481 Jy ! Clean residual min=-0.001991 max=0.001931 Jy/beam ! Clean residual mean=0.000001 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.914366 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 149 components and 0.914366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052484Jy sigma=0.380555 ! Fit after self-cal, rms=0.052482Jy sigma=0.380552 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136916 Jy ! Component: 100 - total flux cleaned = 0.000238279 Jy ! Component: 150 - total flux cleaned = 0.00028626 Jy ! Component: 200 - total flux cleaned = 0.000332455 Jy ! Total flux subtracted in 200 components = 0.000332455 Jy ! Clean residual min=-0.001958 max=0.001902 Jy/beam ! Clean residual mean=0.000001 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.914698 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 157 components and 0.914698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052465Jy sigma=0.380391 ! Fit after self-cal, rms=0.052465Jy sigma=0.380389 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052465Jy sigma=0.380389 ! Fit after self-cal, rms=0.052462Jy sigma=0.380366 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5931 mas, bmaj=1.723 mas, bpa=4.385 degrees ! Estimated noise=1.79602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.471612 Jy ! Component: 100 - total flux cleaned = 0.679535 Jy ! Component: 150 - total flux cleaned = 0.783958 Jy ! Component: 200 - total flux cleaned = 0.838679 Jy ! Total flux subtracted in 200 components = 0.838679 Jy ! Clean residual min=-0.016839 max=0.026803 Jy/beam ! Clean residual mean=-0.000006 rms=0.002949 Jy/beam ! Combined flux in latest and established models = 0.838679 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.838679 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7252 mas, bmaj=1.87 mas, bpa=4.715 degrees ! Estimated noise=1.32732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0358644 Jy ! Component: 100 - total flux cleaned = 0.0526006 Jy ! Component: 150 - total flux cleaned = 0.0606608 Jy ! Component: 200 - total flux cleaned = 0.0628483 Jy ! Total flux subtracted in 200 components = 0.0628483 Jy ! Clean residual min=-0.003500 max=0.004273 Jy/beam ! Clean residual mean=0.000000 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.901527 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 0.901527 Jy ! Inverting map ! Added new window around map position (1.2, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265869 Jy ! Component: 100 - total flux cleaned = 0.00472991 Jy ! Component: 150 - total flux cleaned = 0.00634308 Jy ! Component: 200 - total flux cleaned = 0.00787159 Jy ! Total flux subtracted in 200 components = 0.00787159 Jy ! Clean residual min=-0.002709 max=0.002760 Jy/beam ! Clean residual mean=0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.909399 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 45 components and 0.909399 Jy ! Inverting map ! Added new window around map position (-3.6, 4.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191012 Jy ! Component: 100 - total flux cleaned = 0.00277635 Jy ! Component: 150 - total flux cleaned = 0.00355542 Jy ! Component: 200 - total flux cleaned = 0.00402982 Jy ! Total flux subtracted in 200 components = 0.00402982 Jy ! Clean residual min=-0.002465 max=0.002212 Jy/beam ! Clean residual mean=0.000001 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.913429 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 64 components and 0.913428 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.159 mas, bmaj=3.052 mas, bpa=3.28 degrees ! Estimated noise=2.0359 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106247 Jy ! Component: 100 - total flux cleaned = 0.00143049 Jy ! Component: 150 - total flux cleaned = 0.00165738 Jy ! Component: 200 - total flux cleaned = 0.00182381 Jy ! Total flux subtracted in 200 components = 0.00182381 Jy ! Clean residual min=-0.002376 max=0.002146 Jy/beam ! Clean residual mean=0.000002 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.915252 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015385 Jy ! Component: 100 - total flux cleaned = 0.000191575 Jy ! Component: 150 - total flux cleaned = 0.000225498 Jy ! Component: 200 - total flux cleaned = 0.00016183 Jy ! Total flux subtracted in 200 components = 0.00016183 Jy ! Clean residual min=-0.002233 max=0.002140 Jy/beam ! Clean residual mean=0.000002 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.915414 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 105 components and 0.915414 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7252 mas, bmaj=1.87 mas, bpa=4.715 degrees ! Estimated noise=1.32732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000398846 Jy ! Component: 100 - total flux cleaned = 0.000738746 Jy ! Component: 150 - total flux cleaned = 0.000857504 Jy ! Component: 200 - total flux cleaned = 0.00103007 Jy ! Total flux subtracted in 200 components = 0.00103007 Jy ! Clean residual min=-0.002061 max=0.001965 Jy/beam ! Clean residual mean=0.000001 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.916444 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 120 components and 0.916444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.052609Jy sigma=0.381875 ! Fit after self-cal, rms=0.052596Jy sigma=0.381708 wmodel J2320+0513_X_h_map.mod ! Writing 120 model components to file: J2320+0513_X_h_map.mod wobs J2320+0513_X_h_uvs.fits ! Writing UV FITS file: J2320+0513_X_h_uvs.fits wwins J2320+0513_X_h_map.win ! wwins: Wrote 7 windows to J2320+0513_X_h_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000835511 Jy ! Component: 100 - total flux cleaned = -0.00111637 Jy ! Component: 150 - total flux cleaned = -0.00131723 Jy ! Component: 200 - total flux cleaned = -0.00121963 Jy ! Component: 250 - total flux cleaned = -0.00118763 Jy ! Component: 300 - total flux cleaned = -0.00112534 Jy ! Component: 350 - total flux cleaned = -0.000914832 Jy ! Component: 400 - total flux cleaned = -0.000679781 Jy ! Component: 450 - total flux cleaned = -0.000478887 Jy ! Component: 500 - total flux cleaned = -0.000422816 Jy ! Component: 550 - total flux cleaned = -0.0003946 Jy ! Component: 600 - total flux cleaned = -0.000258018 Jy ! Component: 650 - total flux cleaned = -0.000257828 Jy ! Component: 700 - total flux cleaned = -0.00015269 Jy ! Component: 750 - total flux cleaned = -0.000100858 Jy ! Component: 800 - total flux cleaned = 5.25422e-05 Jy ! Component: 850 - total flux cleaned = 0.000153257 Jy ! Component: 900 - total flux cleaned = 0.000276846 Jy ! Component: 950 - total flux cleaned = 0.000325177 Jy ! Component: 1000 - total flux cleaned = 0.000348875 Jy ! Component: 1050 - total flux cleaned = 0.000420025 Jy ! Component: 1100 - total flux cleaned = 0.000419864 Jy ! Component: 1150 - total flux cleaned = 0.000512823 Jy ! Component: 1200 - total flux cleaned = 0.00053529 Jy ! Component: 1250 - total flux cleaned = 0.000580527 Jy ! Component: 1300 - total flux cleaned = 0.000625329 Jy ! Component: 1350 - total flux cleaned = 0.000559766 Jy ! Component: 1400 - total flux cleaned = 0.000646933 Jy ! Component: 1450 - total flux cleaned = 0.000625364 Jy ! Component: 1500 - total flux cleaned = 0.000667676 Jy ! Component: 1550 - total flux cleaned = 0.000709686 Jy ! Component: 1600 - total flux cleaned = 0.000751256 Jy ! Component: 1650 - total flux cleaned = 0.000751096 Jy ! Component: 1700 - total flux cleaned = 0.00079174 Jy ! Component: 1750 - total flux cleaned = 0.000811774 Jy ! Component: 1800 - total flux cleaned = 0.00085166 Jy ! Component: 1850 - total flux cleaned = 0.00083206 Jy ! Component: 1900 - total flux cleaned = 0.000871393 Jy ! Component: 1950 - total flux cleaned = 0.00085217 Jy ! Component: 2000 - total flux cleaned = 0.000928695 Jy ! Component: 2050 - total flux cleaned = 0.000890995 Jy ! Component: 2100 - total flux cleaned = 0.00100367 Jy ! Component: 2150 - total flux cleaned = 0.00104074 Jy ! Component: 2200 - total flux cleaned = 0.00109576 Jy ! Component: 2250 - total flux cleaned = 0.00111364 Jy ! Component: 2300 - total flux cleaned = 0.00113173 Jy ! Component: 2350 - total flux cleaned = 0.00120356 Jy ! Component: 2400 - total flux cleaned = 0.00122123 Jy ! Component: 2450 - total flux cleaned = 0.00123878 Jy ! Component: 2500 - total flux cleaned = 0.0013783 Jy ! Component: 2550 - total flux cleaned = 0.00139504 Jy ! Component: 2600 - total flux cleaned = 0.0013948 Jy ! Component: 2650 - total flux cleaned = 0.00144599 Jy ! Component: 2700 - total flux cleaned = 0.00147971 Jy ! Component: 2750 - total flux cleaned = 0.00154686 Jy ! Component: 2800 - total flux cleaned = 0.00156336 Jy ! Component: 2850 - total flux cleaned = 0.00153044 Jy ! Component: 2900 - total flux cleaned = 0.00159572 Jy ! Component: 2950 - total flux cleaned = 0.0015797 Jy ! Component: 3000 - total flux cleaned = 0.00161195 Jy ! Component: 3050 - total flux cleaned = 0.00169159 Jy ! Component: 3100 - total flux cleaned = 0.00170768 Jy ! Component: 3150 - total flux cleaned = 0.0017859 Jy ! Component: 3200 - total flux cleaned = 0.00181704 Jy ! Component: 3250 - total flux cleaned = 0.00184775 Jy ! Component: 3300 - total flux cleaned = 0.00193963 Jy ! Component: 3350 - total flux cleaned = 0.00195474 Jy ! Component: 3400 - total flux cleaned = 0.00203016 Jy ! Component: 3450 - total flux cleaned = 0.00202994 Jy ! Component: 3500 - total flux cleaned = 0.00205957 Jy ! Component: 3550 - total flux cleaned = 0.00211848 Jy ! Component: 3600 - total flux cleaned = 0.00214787 Jy ! Component: 3650 - total flux cleaned = 0.00216243 Jy ! Component: 3700 - total flux cleaned = 0.00226329 Jy ! Component: 3750 - total flux cleaned = 0.00227771 Jy ! Component: 3800 - total flux cleaned = 0.00234864 Jy ! Component: 3850 - total flux cleaned = 0.00240495 Jy ! Component: 3900 - total flux cleaned = 0.00244698 Jy ! Component: 3950 - total flux cleaned = 0.00250281 Jy ! Component: 4000 - total flux cleaned = 0.00258567 Jy ! Component: 4050 - total flux cleaned = 0.0025857 Jy ! Total flux subtracted in 4096 components = 0.00262664 Jy ! Clean residual min=-0.000698 max=0.001050 Jy/beam ! Clean residual mean=0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.919071 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 384 components and 0.919071 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2320+0513_X_h_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7252 x 1.87 at 4.715 degrees (North through East) ! Clean map min=-0.0013081 max=0.63214 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2320+0513_X_h_map.fits wmodel /image_prod/ug002_uva//J2320+0513_X_h_map.mod ! Writing 384 model components to file: /image_prod/ug002_uva//J2320+0513_X_h_map.mod wobs /image_prod/ug002_uva//J2320+0513_X_h_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2320+0513_X_h_uvs.fits wwins /image_prod/ug002_uva//J2320+0513_X_h_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J2320+0513_X_h_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.632144 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228875 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.108619 0.108619 0.217237 0.434475 0.86895 1.7379 3.4758 6.9516 13.9032 27.8064 55.6128 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.632 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2761.96 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2320+0513_X_h_dfm.log closed on Thu Mar 5 06:12:38 2020