! Started logfile: /image_prod/ug002_uva//J2320+0513_X_c_dfm.log on Thu Mar 5 06:12:14 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2320+0513_X_c_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2320+0513_X_c_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.872222 visibilities/baseline/integration-bin. ! Found source: J2320+0513 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 5652 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2320+0513_X_c] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.276664Jy sigma=8.438103 ! Fit after self-cal, rms=0.297450Jy sigma=1.982294 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7433 mas, bmaj=1.676 mas, bpa=-0.3776 degrees ! Estimated noise=1.98184 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.547465 Jy ! Component: 100 - total flux cleaned = 0.69428 Jy ! Total flux subtracted in 100 components = 0.69428 Jy ! Clean residual min=-0.027200 max=0.064754 Jy/beam ! Clean residual mean=-0.000003 rms=0.006852 Jy/beam ! Combined flux in latest and established models = 0.69428 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.69428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168475Jy sigma=1.072087 ! Fit after self-cal, rms=0.168422Jy sigma=1.071816 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0711247 Jy ! Component: 100 - total flux cleaned = 0.108409 Jy ! Total flux subtracted in 100 components = 0.108409 Jy ! Clean residual min=-0.022114 max=0.033310 Jy/beam ! Clean residual mean=0.000002 rms=0.004924 Jy/beam ! Combined flux in latest and established models = 0.802689 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.802689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121892Jy sigma=0.770646 ! Fit after self-cal, rms=0.121855Jy sigma=0.770481 ! Inverting map ! Added new window around map position (1.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302493 Jy ! Component: 100 - total flux cleaned = 0.0502247 Jy ! Total flux subtracted in 100 components = 0.0502247 Jy ! Clean residual min=-0.021989 max=0.030836 Jy/beam ! Clean residual mean=0.000004 rms=0.004411 Jy/beam ! Combined flux in latest and established models = 0.852914 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.852914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.110853Jy sigma=0.698688 ! Fit after self-cal, rms=0.110361Jy sigma=0.694894 ! Inverting map ! Added new window around map position (-3.6, -4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166532 Jy ! Component: 100 - total flux cleaned = 0.0278483 Jy ! Total flux subtracted in 100 components = 0.0278483 Jy ! Clean residual min=-0.021978 max=0.026316 Jy/beam ! Clean residual mean=0.000004 rms=0.004029 Jy/beam ! Combined flux in latest and established models = 0.880762 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.880762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104966Jy sigma=0.659379 ! Fit after self-cal, rms=0.104708Jy sigma=0.657354 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8967 mas, bmaj=1.915 mas, bpa=-1.204 degrees ! Estimated noise=1.47511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.8, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240539 Jy ! Component: 100 - total flux cleaned = 0.0390918 Jy ! Component: 150 - total flux cleaned = 0.0484962 Jy ! Component: 200 - total flux cleaned = 0.051254 Jy ! Total flux subtracted in 200 components = 0.051254 Jy ! Clean residual min=-0.021466 max=0.017825 Jy/beam ! Clean residual mean=0.000011 rms=0.004093 Jy/beam ! Combined flux in latest and established models = 0.932016 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 65 components and 0.932016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097510Jy sigma=0.610832 ! Fit after self-cal, rms=0.097293Jy sigma=0.609166 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8967 x 1.915 at -1.204 degrees (North through East) ! Clean map min=-0.020539 max=0.72581 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.01 KP 1.05 ! LA 1.02 MK 1.03 NL 1.03 OV 0.99 ! PT 0.88 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.01 KP 1.04 ! LA 1.00 MK 1.04 NL 1.03 OV 0.99 ! PT 0.87 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 0.99 KP 1.06 ! LA 1.00 MK 1.02 NL 1.03 OV 1.00 ! PT 0.87 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 0.99 KP 1.06 ! LA 1.00 MK 1.02 NL 1.03 OV 1.00 ! PT 0.89 SC 1.07 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.99 KP 1.06 ! LA 1.02 MK 1.02 NL 1.03 OV 0.99 ! PT 0.87 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.99 KP 1.05 ! LA 1.01 MK 1.03 NL 1.04 OV 1.02 ! PT 0.87 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.01 KP 1.05 ! LA 1.01 MK 1.03 NL 1.03 OV 1.01 ! PT 0.88 SC 1.08 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.00 KP 1.07 ! LA 1.00 MK 1.05 NL 1.05 OV 1.01 ! PT 0.87 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.99 KP 1.05 ! LA 1.02 MK 1.05 NL 1.03 OV 1.01 ! PT 0.87 SC 1.07 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 1.00 KP 1.08 ! LA 1.02 MK 1.06 NL 1.04 OV 1.02 ! PT 0.88 SC 1.05 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.01 KP 1.06 ! LA 1.00 MK 1.06 NL 1.05 OV 1.00 ! PT 0.89 SC 1.09 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 1.01 KP 1.05 ! LA 1.02 MK 1.06 NL 1.01 OV 1.02 ! PT 0.88 SC 1.06 ! ! ! Fit before self-cal, rms=0.097293Jy sigma=0.609166 ! Fit after self-cal, rms=0.076456Jy sigma=0.475434 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9118 mas, bmaj=1.931 mas, bpa=-1.268 degrees ! Estimated noise=1.47995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 18.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00222639 Jy ! Component: 100 - total flux cleaned = -0.00787401 Jy ! Component: 150 - total flux cleaned = -0.0137356 Jy ! Component: 200 - total flux cleaned = -0.0183769 Jy ! Total flux subtracted in 200 components = -0.0183769 Jy ! Clean residual min=-0.009076 max=0.010839 Jy/beam ! Clean residual mean=-0.000001 rms=0.001883 Jy/beam ! Combined flux in latest and established models = 0.913639 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 84 components and 0.913639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072993Jy sigma=0.453442 ! Fit after self-cal, rms=0.072809Jy sigma=0.452138 ! Inverting map ! Added new window around map position (-3, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000375922 Jy ! Component: 100 - total flux cleaned = -0.000651973 Jy ! Component: 150 - total flux cleaned = -0.00160803 Jy ! Component: 200 - total flux cleaned = -0.00352658 Jy ! Total flux subtracted in 200 components = -0.00352658 Jy ! Clean residual min=-0.008196 max=0.007330 Jy/beam ! Clean residual mean=-0.000001 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 0.910112 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.910112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070623Jy sigma=0.439327 ! Fit after self-cal, rms=0.070585Jy sigma=0.439059 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070585Jy sigma=0.439059 ! Fit after self-cal, rms=0.068079Jy sigma=0.415843 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.91 mas, bmaj=1.929 mas, bpa=-1.208 degrees ! Estimated noise=1.48215 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0072291 Jy ! Component: 100 - total flux cleaned = -0.0119517 Jy ! Component: 150 - total flux cleaned = -0.0141217 Jy ! Component: 200 - total flux cleaned = -0.0152098 Jy ! Total flux subtracted in 200 components = -0.0152098 Jy ! Clean residual min=-0.005500 max=0.004467 Jy/beam ! Clean residual mean=-0.000000 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.894903 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 120 components and 0.894903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066969Jy sigma=0.409431 ! Fit after self-cal, rms=0.066930Jy sigma=0.409136 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158273 Jy ! Component: 100 - total flux cleaned = -0.00204735 Jy ! Component: 150 - total flux cleaned = -0.00268337 Jy ! Component: 200 - total flux cleaned = -0.00287674 Jy ! Total flux subtracted in 200 components = -0.00287674 Jy ! Clean residual min=-0.005131 max=0.004527 Jy/beam ! Clean residual mean=-0.000000 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.892026 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 133 components and 0.892026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066577Jy sigma=0.407065 ! Fit after self-cal, rms=0.066564Jy sigma=0.407013 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066564Jy sigma=0.407013 ! Fit after self-cal, rms=0.066574Jy sigma=0.405283 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9104 mas, bmaj=1.93 mas, bpa=-1.188 degrees ! Estimated noise=1.48141 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00468629 Jy ! Component: 100 - total flux cleaned = -0.00630446 Jy ! Component: 150 - total flux cleaned = -0.00724639 Jy ! Component: 200 - total flux cleaned = -0.00798819 Jy ! Total flux subtracted in 200 components = -0.00798819 Jy ! Clean residual min=-0.004560 max=0.004200 Jy/beam ! Clean residual mean=0.000000 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.884038 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 142 components and 0.884038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066080Jy sigma=0.402517 ! Fit after self-cal, rms=0.066074Jy sigma=0.402481 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000966348 Jy ! Component: 100 - total flux cleaned = -0.00143289 Jy ! Component: 150 - total flux cleaned = -0.00172205 Jy ! Component: 200 - total flux cleaned = -0.00185773 Jy ! Total flux subtracted in 200 components = -0.00185773 Jy ! Clean residual min=-0.004417 max=0.004255 Jy/beam ! Clean residual mean=0.000000 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.88218 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 154 components and 0.88218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065915Jy sigma=0.401553 ! Fit after self-cal, rms=0.065910Jy sigma=0.401539 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065910Jy sigma=0.401539 ! Fit after self-cal, rms=0.066000Jy sigma=0.400510 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.148 mas, bmaj=3.047 mas, bpa=4.828 degrees ! Estimated noise=1.93002 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0037992 Jy ! Component: 100 - total flux cleaned = -0.0047114 Jy ! Component: 150 - total flux cleaned = -0.0048386 Jy ! Component: 200 - total flux cleaned = -0.00484294 Jy ! Total flux subtracted in 200 components = -0.00484294 Jy ! Clean residual min=-0.004783 max=0.003901 Jy/beam ! Clean residual mean=0.000001 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.877337 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 165 components and 0.877337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065804Jy sigma=0.399526 ! Fit after self-cal, rms=0.065805Jy sigma=0.399499 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142789 Jy ! Component: 100 - total flux cleaned = -9.27029e-05 Jy ! Component: 150 - total flux cleaned = -0.000134976 Jy ! Component: 200 - total flux cleaned = -0.000133509 Jy ! Total flux subtracted in 200 components = -0.000133509 Jy ! Clean residual min=-0.004820 max=0.003928 Jy/beam ! Clean residual mean=0.000001 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.877204 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 176 components and 0.877203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065747Jy sigma=0.399337 ! Fit after self-cal, rms=0.065745Jy sigma=0.399329 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9105 mas, bmaj=1.93 mas, bpa=-1.169 degrees ! Estimated noise=1.48115 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9105 x 1.93 at -1.169 degrees (North through East) ! Clean map min=-0.0069639 max=0.72996 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065745Jy sigma=0.399329 ! Fit after self-cal, rms=0.061669Jy sigma=0.367886 ! Inverting map and beam ! Estimated beam: bmin=0.9105 mas, bmaj=1.93 mas, bpa=-1.108 degrees ! Estimated noise=1.47933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00174027 Jy ! Component: 100 - total flux cleaned = -0.00231825 Jy ! Component: 150 - total flux cleaned = -0.00279203 Jy ! Component: 200 - total flux cleaned = -0.00321877 Jy ! Total flux subtracted in 200 components = -0.00321877 Jy ! Clean residual min=-0.003679 max=0.003462 Jy/beam ! Clean residual mean=0.000001 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.873985 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 184 components and 0.873985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061457Jy sigma=0.366544 ! Fit after self-cal, rms=0.061449Jy sigma=0.366510 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000366024 Jy ! Component: 100 - total flux cleaned = -0.000740222 Jy ! Component: 150 - total flux cleaned = -0.000992807 Jy ! Component: 200 - total flux cleaned = -0.00113659 Jy ! Total flux subtracted in 200 components = -0.00113659 Jy ! Clean residual min=-0.003635 max=0.003484 Jy/beam ! Clean residual mean=0.000001 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.872848 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 195 components and 0.872848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061370Jy sigma=0.366010 ! Fit after self-cal, rms=0.061369Jy sigma=0.366002 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061369Jy sigma=0.366002 ! Fit after self-cal, rms=0.061355Jy sigma=0.365553 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7518 mas, bmaj=1.681 mas, bpa=-0.2749 degrees ! Estimated noise=2.00997 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.555137 Jy ! Component: 100 - total flux cleaned = 0.699036 Jy ! Component: 150 - total flux cleaned = 0.766177 Jy ! Component: 200 - total flux cleaned = 0.800759 Jy ! Total flux subtracted in 200 components = 0.800759 Jy ! Clean residual min=-0.010609 max=0.016215 Jy/beam ! Clean residual mean=-0.000002 rms=0.002351 Jy/beam ! Combined flux in latest and established models = 0.800759 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.800759 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9104 mas, bmaj=1.93 mas, bpa=-1.102 degrees ! Estimated noise=1.47843 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260829 Jy ! Component: 100 - total flux cleaned = 0.042431 Jy ! Component: 150 - total flux cleaned = 0.0542553 Jy ! Component: 200 - total flux cleaned = 0.0610417 Jy ! Total flux subtracted in 200 components = 0.0610417 Jy ! Clean residual min=-0.005601 max=0.007679 Jy/beam ! Clean residual mean=0.000001 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.8618 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 46 components and 0.861801 Jy ! Inverting map ! Added new window around map position (-8.4, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00636415 Jy ! Component: 100 - total flux cleaned = 0.00986171 Jy ! Component: 150 - total flux cleaned = 0.0119941 Jy ! Component: 200 - total flux cleaned = 0.0132619 Jy ! Total flux subtracted in 200 components = 0.0132619 Jy ! Clean residual min=-0.004663 max=0.005974 Jy/beam ! Clean residual mean=0.000001 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.875062 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 75 components and 0.875062 Jy ! Inverting map ! Added new window around map position (8.4, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371167 Jy ! Component: 100 - total flux cleaned = 0.00456979 Jy ! Component: 150 - total flux cleaned = 0.00504513 Jy ! Component: 200 - total flux cleaned = 0.00564047 Jy ! Total flux subtracted in 200 components = 0.00564047 Jy ! Clean residual min=-0.004386 max=0.004132 Jy/beam ! Clean residual mean=0.000001 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.880703 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 94 components and 0.880703 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.151 mas, bmaj=3.049 mas, bpa=4.912 degrees ! Estimated noise=1.92536 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116931 Jy ! Component: 100 - total flux cleaned = 0.00105105 Jy ! Component: 150 - total flux cleaned = 0.00105055 Jy ! Component: 200 - total flux cleaned = 0.00105067 Jy ! Total flux subtracted in 200 components = 0.00105067 Jy ! Clean residual min=-0.003128 max=0.003694 Jy/beam ! Clean residual mean=0.000001 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.881754 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.10976e-06 Jy ! Component: 100 - total flux cleaned = 0.000209829 Jy ! Component: 150 - total flux cleaned = 0.000392308 Jy ! Component: 200 - total flux cleaned = 0.000557735 Jy ! Total flux subtracted in 200 components = 0.000557735 Jy ! Clean residual min=-0.002993 max=0.003640 Jy/beam ! Clean residual mean=0.000001 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.882311 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 120 components and 0.882311 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9104 mas, bmaj=1.93 mas, bpa=-1.102 degrees ! Estimated noise=1.47843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108866 Jy ! Component: 100 - total flux cleaned = -0.000724994 Jy ! Component: 150 - total flux cleaned = -0.000725976 Jy ! Component: 200 - total flux cleaned = -0.000723588 Jy ! Total flux subtracted in 200 components = -0.000723588 Jy ! Clean residual min=-0.003679 max=0.003832 Jy/beam ! Clean residual mean=0.000000 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.881588 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 135 components and 0.881588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062207Jy sigma=0.369096 ! Fit after self-cal, rms=0.062157Jy sigma=0.368876 wmodel J2320+0513_X_c_map.mod ! Writing 135 model components to file: J2320+0513_X_c_map.mod wobs J2320+0513_X_c_uvs.fits ! Writing UV FITS file: J2320+0513_X_c_uvs.fits wwins J2320+0513_X_c_map.win ! wwins: Wrote 8 windows to J2320+0513_X_c_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107621 Jy ! Component: 100 - total flux cleaned = -0.000601275 Jy ! Component: 150 - total flux cleaned = -0.00135377 Jy ! Component: 200 - total flux cleaned = -0.00190736 Jy ! Component: 250 - total flux cleaned = -0.00249611 Jy ! Component: 300 - total flux cleaned = -0.0030154 Jy ! Component: 350 - total flux cleaned = -0.00346989 Jy ! Component: 400 - total flux cleaned = -0.0038638 Jy ! Component: 450 - total flux cleaned = -0.00424823 Jy ! Component: 500 - total flux cleaned = -0.00462346 Jy ! Component: 550 - total flux cleaned = -0.00494513 Jy ! Component: 600 - total flux cleaned = -0.00521629 Jy ! Component: 650 - total flux cleaned = -0.00561491 Jy ! Component: 700 - total flux cleaned = -0.00591958 Jy ! Component: 750 - total flux cleaned = -0.00626253 Jy ! Component: 800 - total flux cleaned = -0.00647369 Jy ! Component: 850 - total flux cleaned = -0.00684796 Jy ! Component: 900 - total flux cleaned = -0.00717464 Jy ! Component: 950 - total flux cleaned = -0.00729521 Jy ! Component: 1000 - total flux cleaned = -0.00753321 Jy ! Component: 1050 - total flux cleaned = -0.00780673 Jy ! Component: 1100 - total flux cleaned = -0.0079994 Jy ! Component: 1150 - total flux cleaned = -0.00822745 Jy ! Component: 1200 - total flux cleaned = -0.00837799 Jy ! Component: 1250 - total flux cleaned = -0.00860012 Jy ! Component: 1300 - total flux cleaned = -0.00870998 Jy ! Component: 1350 - total flux cleaned = -0.0089622 Jy ! Component: 1400 - total flux cleaned = -0.0091041 Jy ! Component: 1450 - total flux cleaned = -0.00935064 Jy ! Component: 1500 - total flux cleaned = -0.00931598 Jy ! Component: 1550 - total flux cleaned = -0.00959165 Jy ! Component: 1600 - total flux cleaned = -0.00959176 Jy ! Component: 1650 - total flux cleaned = -0.00976002 Jy ! Component: 1700 - total flux cleaned = -0.0098925 Jy ! Component: 1750 - total flux cleaned = -0.0100569 Jy ! Component: 1800 - total flux cleaned = -0.0100887 Jy ! Component: 1850 - total flux cleaned = -0.0101857 Jy ! Component: 1900 - total flux cleaned = -0.0102494 Jy ! Component: 1950 - total flux cleaned = -0.0104068 Jy ! Component: 2000 - total flux cleaned = -0.0103755 Jy ! Component: 2050 - total flux cleaned = -0.0104985 Jy ! Component: 2100 - total flux cleaned = -0.0104376 Jy ! Component: 2150 - total flux cleaned = -0.010528 Jy ! Component: 2200 - total flux cleaned = -0.0105874 Jy ! Component: 2250 - total flux cleaned = -0.0107057 Jy ! Component: 2300 - total flux cleaned = -0.0105595 Jy ! Component: 2350 - total flux cleaned = -0.010734 Jy ! Component: 2400 - total flux cleaned = -0.0107912 Jy ! Component: 2450 - total flux cleaned = -0.0107627 Jy ! Component: 2500 - total flux cleaned = -0.0108197 Jy ! Component: 2550 - total flux cleaned = -0.0109597 Jy ! Component: 2600 - total flux cleaned = -0.0110703 Jy ! Component: 2650 - total flux cleaned = -0.0111251 Jy ! Component: 2700 - total flux cleaned = -0.0111793 Jy ! Component: 2750 - total flux cleaned = -0.011206 Jy ! Component: 2800 - total flux cleaned = -0.0112327 Jy ! Component: 2850 - total flux cleaned = -0.0113909 Jy ! Component: 2900 - total flux cleaned = -0.0114433 Jy ! Component: 2950 - total flux cleaned = -0.011469 Jy ! Component: 3000 - total flux cleaned = -0.0114684 Jy ! Component: 3050 - total flux cleaned = -0.0114942 Jy ! Component: 3100 - total flux cleaned = -0.0115954 Jy ! Component: 3150 - total flux cleaned = -0.0116205 Jy ! Component: 3200 - total flux cleaned = -0.011695 Jy ! Component: 3250 - total flux cleaned = -0.0116951 Jy ! Component: 3300 - total flux cleaned = -0.0116951 Jy ! Component: 3350 - total flux cleaned = -0.0118168 Jy ! Component: 3400 - total flux cleaned = -0.0118168 Jy ! Component: 3450 - total flux cleaned = -0.0118885 Jy ! Component: 3500 - total flux cleaned = -0.0119121 Jy ! Component: 3550 - total flux cleaned = -0.0119356 Jy ! Component: 3600 - total flux cleaned = -0.0118892 Jy ! Component: 3650 - total flux cleaned = -0.0119354 Jy ! Component: 3700 - total flux cleaned = -0.0118206 Jy ! Component: 3750 - total flux cleaned = -0.0119574 Jy ! Component: 3800 - total flux cleaned = -0.0118896 Jy ! Component: 3850 - total flux cleaned = -0.0117774 Jy ! Component: 3900 - total flux cleaned = -0.0117776 Jy ! Component: 3950 - total flux cleaned = -0.0118218 Jy ! Component: 4000 - total flux cleaned = -0.0116686 Jy ! Component: 4050 - total flux cleaned = -0.0117556 Jy ! Total flux subtracted in 4096 components = -0.0116908 Jy ! Clean residual min=-0.001255 max=0.001275 Jy/beam ! Clean residual mean=-0.000000 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.869897 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 415 components and 0.869896 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2320+0513_X_c_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9104 x 1.93 at -1.102 degrees (North through East) ! Clean map min=-0.0049168 max=0.73503 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2320+0513_X_c_map.fits wmodel /image_prod/ug002_uva//J2320+0513_X_c_map.mod ! Writing 415 model components to file: /image_prod/ug002_uva//J2320+0513_X_c_map.mod wobs /image_prod/ug002_uva//J2320+0513_X_c_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2320+0513_X_c_uvs.fits wwins /image_prod/ug002_uva//J2320+0513_X_c_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J2320+0513_X_c_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.735033 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000373741 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.152541 0.152541 0.305081 0.610163 1.22033 2.44065 4.8813 9.7626 19.5252 39.0504 78.1008 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.735 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1966.69 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2320+0513_X_c_dfm.log closed on Thu Mar 5 06:12:18 2020