! Started logfile: /image_prod/ug002_uva//J2318+2404_S_dfm.log on Thu Mar 5 06:10:49 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2318+2404_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2318+2404_S_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.913333 visibilities/baseline/integration-bin. ! Found source: J2318+2404 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 44 lines of history. ! ! Reading 7398 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2318+2404_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008863Jy sigma=9.198065 ! Fit after self-cal, rms=0.865183Jy sigma=7.973876 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=7.075 mas, bpa=-1.74 degrees ! Estimated noise=1.26017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103371 Jy ! Component: 100 - total flux cleaned = 0.125942 Jy ! Total flux subtracted in 100 components = 0.125942 Jy ! Clean residual min=-0.006041 max=0.006870 Jy/beam ! Clean residual mean=-0.000001 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.125942 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.125942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.089455Jy sigma=0.538026 ! Fit after self-cal, rms=0.089440Jy sigma=0.537962 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=8.034 mas, bpa=-0.4575 degrees ! Estimated noise=0.941715 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771683 Jy ! Component: 100 - total flux cleaned = 0.0112549 Jy ! Component: 150 - total flux cleaned = 0.013322 Jy ! Component: 200 - total flux cleaned = 0.0145978 Jy ! Total flux subtracted in 200 components = 0.0145978 Jy ! Clean residual min=-0.006136 max=0.004951 Jy/beam ! Clean residual mean=0.000012 rms=0.001345 Jy/beam ! Combined flux in latest and established models = 0.140539 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.140539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.088525Jy sigma=0.530542 ! Fit after self-cal, rms=0.088524Jy sigma=0.530423 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.75 x 8.034 at -0.4575 degrees (North through East) ! Clean map min=-0.0060209 max=0.13389 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.10 HN 1.08 KP 1.05 ! LA 1.07 MK 1.07 NL 1.00 OV 0.66 ! PT 1.06 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.08 HN 1.01 KP 1.02 ! LA 1.03 MK 1.01 NL 0.95 OV 0.99 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.07 HN 1.05 KP 1.06 ! LA 1.06 MK 1.05 NL 0.98 OV 0.68 ! PT 1.05 SC 1.02 ! ! ! Fit before self-cal, rms=0.088524Jy sigma=0.530423 ! Fit after self-cal, rms=0.080389Jy sigma=0.487282 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.788 mas, bmaj=8.117 mas, bpa=-0.1868 degrees ! Estimated noise=0.945971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268175 Jy ! Component: 100 - total flux cleaned = 0.00217297 Jy ! Component: 150 - total flux cleaned = 0.00196722 Jy ! Component: 200 - total flux cleaned = 0.00184533 Jy ! Total flux subtracted in 200 components = 0.00184533 Jy ! Clean residual min=-0.002379 max=0.002872 Jy/beam ! Clean residual mean=0.000004 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.142385 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 57 components and 0.142385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080081Jy sigma=0.484976 ! Fit after self-cal, rms=0.080137Jy sigma=0.484089 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.080137Jy sigma=0.484089 ! Fit after self-cal, rms=0.064838Jy sigma=0.471431 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=8.088 mas, bpa=-0.4285 degrees ! Estimated noise=0.942254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142252 Jy ! Component: 100 - total flux cleaned = 0.00131812 Jy ! Component: 150 - total flux cleaned = 0.00125632 Jy ! Component: 200 - total flux cleaned = 0.0012277 Jy ! Total flux subtracted in 200 components = 0.0012277 Jy ! Clean residual min=-0.001605 max=0.001758 Jy/beam ! Clean residual mean=0.000004 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.143612 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 77 components and 0.143612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064772Jy sigma=0.470912 ! Fit after self-cal, rms=0.064760Jy sigma=0.470779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211925 Jy ! Component: 100 - total flux cleaned = 0.000265556 Jy ! Component: 150 - total flux cleaned = 0.000265157 Jy ! Component: 200 - total flux cleaned = 0.000264796 Jy ! Total flux subtracted in 200 components = 0.000264796 Jy ! Clean residual min=-0.001643 max=0.001724 Jy/beam ! Clean residual mean=0.000004 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.143877 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 91 components and 0.143877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064733Jy sigma=0.470609 ! Fit after self-cal, rms=0.064731Jy sigma=0.470596 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064731Jy sigma=0.470596 ! Fit after self-cal, rms=0.063867Jy sigma=0.469700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=8.083 mas, bpa=-0.3272 degrees ! Estimated noise=0.938793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000648633 Jy ! Component: 100 - total flux cleaned = 0.000621632 Jy ! Component: 150 - total flux cleaned = 0.000647167 Jy ! Component: 200 - total flux cleaned = 0.000647319 Jy ! Total flux subtracted in 200 components = 0.000647319 Jy ! Clean residual min=-0.001549 max=0.001762 Jy/beam ! Clean residual mean=0.000003 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.144524 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 103 components and 0.144524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063838Jy sigma=0.469502 ! Fit after self-cal, rms=0.063826Jy sigma=0.469475 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-86.5, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169199 Jy ! Component: 100 - total flux cleaned = 0.00204292 Jy ! Component: 150 - total flux cleaned = 0.00211063 Jy ! Component: 200 - total flux cleaned = 0.00228028 Jy ! Total flux subtracted in 200 components = 0.00228028 Jy ! Clean residual min=-0.001451 max=0.001590 Jy/beam ! Clean residual mean=0.000004 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.146805 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 122 components and 0.146805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063766Jy sigma=0.468911 ! Fit after self-cal, rms=0.063764Jy sigma=0.468878 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063764Jy sigma=0.468878 ! Fit after self-cal, rms=0.063598Jy sigma=0.468832 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.708 mas, bmaj=10.95 mas, bpa=-6.054 degrees ! Estimated noise=1.07125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000874557 Jy ! Component: 100 - total flux cleaned = 0.00129092 Jy ! Component: 150 - total flux cleaned = 0.0013097 Jy ! Component: 200 - total flux cleaned = 0.0013427 Jy ! Total flux subtracted in 200 components = 0.0013427 Jy ! Clean residual min=-0.001411 max=0.001532 Jy/beam ! Clean residual mean=0.000009 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.148147 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 143 components and 0.148147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063591Jy sigma=0.468739 ! Fit after self-cal, rms=0.063587Jy sigma=0.468727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258186 Jy ! Component: 100 - total flux cleaned = 0.000317185 Jy ! Component: 150 - total flux cleaned = 0.000357267 Jy ! Component: 200 - total flux cleaned = 0.000381585 Jy ! Total flux subtracted in 200 components = 0.000381585 Jy ! Clean residual min=-0.001398 max=0.001475 Jy/beam ! Clean residual mean=0.000009 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.148529 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 159 components and 0.148529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063583Jy sigma=0.468695 ! Fit after self-cal, rms=0.063584Jy sigma=0.468691 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=8.082 mas, bpa=-0.3 degrees ! Estimated noise=0.938754 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.74 x 8.082 at -0.3 degrees (North through East) ! Clean map min=-0.0013984 max=0.1333 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=7.149 mas, bpa=-1.618 degrees ! Estimated noise=1.26527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103742 Jy ! Component: 100 - total flux cleaned = 0.126587 Jy ! Component: 150 - total flux cleaned = 0.1346 Jy ! Component: 200 - total flux cleaned = 0.138654 Jy ! Total flux subtracted in 200 components = 0.138654 Jy ! Clean residual min=-0.002368 max=0.002264 Jy/beam ! Clean residual mean=-0.000001 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.138654 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.138654 Jy ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=8.082 mas, bpa=-0.3 degrees ! Estimated noise=0.938754 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304352 Jy ! Component: 100 - total flux cleaned = 0.00499796 Jy ! Component: 150 - total flux cleaned = 0.00652244 Jy ! Component: 200 - total flux cleaned = 0.00761157 Jy ! Total flux subtracted in 200 components = 0.00761157 Jy ! Clean residual min=-0.001614 max=0.001656 Jy/beam ! Clean residual mean=0.000005 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.146266 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 51 components and 0.146266 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.708 mas, bmaj=10.95 mas, bpa=-6.054 degrees ! Estimated noise=1.07125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109683 Jy ! Component: 100 - total flux cleaned = 0.00158365 Jy ! Component: 150 - total flux cleaned = 0.00193725 Jy ! Component: 200 - total flux cleaned = 0.00220371 Jy ! Total flux subtracted in 200 components = 0.00220371 Jy ! Clean residual min=-0.001410 max=0.001423 Jy/beam ! Clean residual mean=0.000009 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.14847 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139962 Jy ! Component: 100 - total flux cleaned = 0.000233977 Jy ! Component: 150 - total flux cleaned = 0.000277002 Jy ! Component: 200 - total flux cleaned = 0.000316353 Jy ! Total flux subtracted in 200 components = 0.000316353 Jy ! Clean residual min=-0.001409 max=0.001426 Jy/beam ! Clean residual mean=0.000009 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.148786 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 89 components and 0.148786 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.74 mas, bmaj=8.082 mas, bpa=-0.3 degrees ! Estimated noise=0.938754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000515748 Jy ! Component: 100 - total flux cleaned = -0.000663142 Jy ! Component: 150 - total flux cleaned = -0.000744417 Jy ! Component: 200 - total flux cleaned = -0.000770365 Jy ! Total flux subtracted in 200 components = -0.000770365 Jy ! Clean residual min=-0.001507 max=0.001620 Jy/beam ! Clean residual mean=0.000004 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.148016 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 111 components and 0.148016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.063603Jy sigma=0.468880 ! Fit after self-cal, rms=0.063602Jy sigma=0.468842 wmodel J2318+2404_S_map.mod ! Writing 111 model components to file: J2318+2404_S_map.mod wobs J2318+2404_S_uvs.fits ! Writing UV FITS file: J2318+2404_S_uvs.fits wwins J2318+2404_S_map.win ! wwins: Wrote 3 windows to J2318+2404_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356036 Jy ! Component: 100 - total flux cleaned = 0.000383892 Jy ! Component: 150 - total flux cleaned = 0.000308238 Jy ! Component: 200 - total flux cleaned = 0.000332643 Jy ! Component: 250 - total flux cleaned = 0.000379493 Jy ! Component: 300 - total flux cleaned = 0.000287683 Jy ! Component: 350 - total flux cleaned = 0.00026525 Jy ! Component: 400 - total flux cleaned = 0.000177551 Jy ! Component: 450 - total flux cleaned = 9.17426e-05 Jy ! Component: 500 - total flux cleaned = 7.07745e-05 Jy ! Component: 550 - total flux cleaned = -1.2069e-05 Jy ! Component: 600 - total flux cleaned = -5.2867e-05 Jy ! Component: 650 - total flux cleaned = -0.000113435 Jy ! Component: 700 - total flux cleaned = -0.000152895 Jy ! Component: 750 - total flux cleaned = -0.000307977 Jy ! Component: 800 - total flux cleaned = -0.000345839 Jy ! Component: 850 - total flux cleaned = -0.000402846 Jy ! Component: 900 - total flux cleaned = -0.000495634 Jy ! Component: 950 - total flux cleaned = -0.000550732 Jy ! Component: 1000 - total flux cleaned = -0.000641095 Jy ! Component: 1050 - total flux cleaned = -0.000712499 Jy ! Component: 1100 - total flux cleaned = -0.000783436 Jy ! Component: 1150 - total flux cleaned = -0.000835688 Jy ! Component: 1200 - total flux cleaned = -0.000922095 Jy ! Component: 1250 - total flux cleaned = -0.0010585 Jy ! Component: 1300 - total flux cleaned = -0.00109234 Jy ! Component: 1350 - total flux cleaned = -0.00117613 Jy ! Component: 1400 - total flux cleaned = -0.00125857 Jy ! Component: 1450 - total flux cleaned = -0.00127482 Jy ! Component: 1500 - total flux cleaned = -0.00140392 Jy ! Component: 1550 - total flux cleaned = -0.00142007 Jy ! Component: 1600 - total flux cleaned = -0.00151499 Jy ! Component: 1650 - total flux cleaned = -0.0015774 Jy ! Component: 1700 - total flux cleaned = -0.001593 Jy ! Component: 1750 - total flux cleaned = -0.00166965 Jy ! Component: 1800 - total flux cleaned = -0.001715 Jy ! Component: 1850 - total flux cleaned = -0.00175984 Jy ! Component: 1900 - total flux cleaned = -0.0017748 Jy ! Component: 1950 - total flux cleaned = -0.00186307 Jy ! Component: 2000 - total flux cleaned = -0.00186312 Jy ! Component: 2050 - total flux cleaned = -0.00184868 Jy ! Component: 2100 - total flux cleaned = -0.00192033 Jy ! Component: 2150 - total flux cleaned = -0.00189189 Jy ! Component: 2200 - total flux cleaned = -0.00189216 Jy ! Component: 2250 - total flux cleaned = -0.00196214 Jy ! Component: 2300 - total flux cleaned = -0.00201741 Jy ! Component: 2350 - total flux cleaned = -0.00208596 Jy ! Component: 2400 - total flux cleaned = -0.00208573 Jy ! Component: 2450 - total flux cleaned = -0.00213969 Jy ! Component: 2500 - total flux cleaned = -0.00213969 Jy ! Component: 2550 - total flux cleaned = -0.00219275 Jy ! Component: 2600 - total flux cleaned = -0.00219277 Jy ! Component: 2650 - total flux cleaned = -0.00220577 Jy ! Component: 2700 - total flux cleaned = -0.00225745 Jy ! Component: 2750 - total flux cleaned = -0.00230875 Jy ! Component: 2800 - total flux cleaned = -0.00232155 Jy ! Component: 2850 - total flux cleaned = -0.00230908 Jy ! Component: 2900 - total flux cleaned = -0.00234678 Jy ! Component: 2950 - total flux cleaned = -0.00234678 Jy ! Component: 3000 - total flux cleaned = -0.00237142 Jy ! Component: 3050 - total flux cleaned = -0.00240803 Jy ! Component: 3100 - total flux cleaned = -0.0024201 Jy ! Component: 3150 - total flux cleaned = -0.00240793 Jy ! Component: 3200 - total flux cleaned = -0.00245584 Jy ! Component: 3250 - total flux cleaned = -0.00244384 Jy ! Component: 3300 - total flux cleaned = -0.00246761 Jy ! Component: 3350 - total flux cleaned = -0.00247945 Jy ! Component: 3400 - total flux cleaned = -0.00253774 Jy ! Component: 3450 - total flux cleaned = -0.00257252 Jy ! Component: 3500 - total flux cleaned = -0.00258403 Jy ! Component: 3550 - total flux cleaned = -0.00256121 Jy ! Component: 3600 - total flux cleaned = -0.002584 Jy ! Component: 3650 - total flux cleaned = -0.00256138 Jy ! Component: 3700 - total flux cleaned = -0.00259511 Jy ! Component: 3750 - total flux cleaned = -0.00262861 Jy ! Component: 3800 - total flux cleaned = -0.00260641 Jy ! Component: 3850 - total flux cleaned = -0.0026614 Jy ! Component: 3900 - total flux cleaned = -0.00256282 Jy ! Component: 3950 - total flux cleaned = -0.00257377 Jy ! Component: 4000 - total flux cleaned = -0.00261707 Jy ! Component: 4050 - total flux cleaned = -0.00258473 Jy ! Total flux subtracted in 4096 components = -0.0025634 Jy ! Clean residual min=-0.000700 max=0.000766 Jy/beam ! Clean residual mean=0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.145452 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 387 components and 0.145452 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2318+2404_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.74 x 8.082 at -0.3 degrees (North through East) ! Clean map min=-0.0012118 max=0.13292 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2318+2404_S_map.fits wmodel /image_prod/ug002_uva//J2318+2404_S_map.mod ! Writing 387 model components to file: /image_prod/ug002_uva//J2318+2404_S_map.mod wobs /image_prod/ug002_uva//J2318+2404_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2318+2404_S_uvs.fits wwins /image_prod/ug002_uva//J2318+2404_S_map.win ! wwins: Wrote 4 windows to /image_prod/ug002_uva//J2318+2404_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.132916 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194715 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.439484 0.439484 0.878969 1.75794 3.51588 7.03175 14.0635 28.127 56.254 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.132 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 682.618 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2318+2404_S_dfm.log closed on Thu Mar 5 06:10:53 2020