! Started logfile: /image_prod/ug002_uva//J2317-1122_S_dfm.log on Thu Mar 5 06:10:29 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2317-1122_S_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2317-1122_S_uva.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.887963 visibilities/baseline/integration-bin. ! Found source: J2317-1122 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 2877 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2317-1122_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001206Jy sigma=7.968761 ! Fit after self-cal, rms=0.932172Jy sigma=7.399552 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=17.53 mas, bpa=-18.33 degrees ! Estimated noise=2.23313 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0518194 Jy ! Component: 100 - total flux cleaned = 0.0663478 Jy ! Total flux subtracted in 100 components = 0.0663478 Jy ! Clean residual min=-0.005077 max=0.005934 Jy/beam ! Clean residual mean=-0.000002 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.0663478 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0663478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.075995Jy sigma=0.479130 ! Fit after self-cal, rms=0.075031Jy sigma=0.470407 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=18.48 mas, bpa=-17.73 degrees ! Estimated noise=1.72078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0087031 Jy ! Component: 100 - total flux cleaned = 0.0127962 Jy ! Component: 150 - total flux cleaned = 0.0150232 Jy ! Component: 200 - total flux cleaned = 0.0157236 Jy ! Total flux subtracted in 200 components = 0.0157236 Jy ! Clean residual min=-0.004085 max=0.002841 Jy/beam ! Clean residual mean=-0.000006 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0820713 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 54 components and 0.0820713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.073985Jy sigma=0.460612 ! Fit after self-cal, rms=0.073938Jy sigma=0.460438 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.647 x 18.48 at -17.73 degrees (North through East) ! Clean map min=-0.0039964 max=0.068411 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.00 KP 0.95 ! LA 1.01 MK 0.96 NL 0.97 OV 0.97 ! PT 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.92 KP 0.98 ! LA 1.07 MK 1.03 NL 1.05 OV 1.04 ! PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.56 FD 1.11 HN 1.05 KP 0.94 ! LA 1.00 MK 1.05 NL 1.01 OV 0.97 ! PT 0.96 ! ! ! Fit before self-cal, rms=0.073938Jy sigma=0.460438 ! Fit after self-cal, rms=0.065095Jy sigma=0.458346 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.665 mas, bmaj=18.34 mas, bpa=-17.69 degrees ! Estimated noise=1.69995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000642481 Jy ! Component: 100 - total flux cleaned = 0.000833223 Jy ! Component: 150 - total flux cleaned = 0.000899695 Jy ! Component: 200 - total flux cleaned = 0.000959966 Jy ! Total flux subtracted in 200 components = 0.000959966 Jy ! Clean residual min=-0.003543 max=0.002658 Jy/beam ! Clean residual mean=-0.000002 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.0830313 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 67 components and 0.0830313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065047Jy sigma=0.457995 ! Fit after self-cal, rms=0.065011Jy sigma=0.457860 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.065011Jy sigma=0.457860 ! Fit after self-cal, rms=0.064953Jy sigma=0.456691 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.65 mas, bmaj=18.28 mas, bpa=-17.65 degrees ! Estimated noise=1.69944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000854289 Jy ! Component: 100 - total flux cleaned = 0.00104438 Jy ! Component: 150 - total flux cleaned = 0.0011277 Jy ! Component: 200 - total flux cleaned = 0.0012263 Jy ! Total flux subtracted in 200 components = 0.0012263 Jy ! Clean residual min=-0.003455 max=0.002644 Jy/beam ! Clean residual mean=-0.000003 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.0842576 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.0842576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064921Jy sigma=0.456473 ! Fit after self-cal, rms=0.064934Jy sigma=0.456404 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.62714e-05 Jy ! Component: 100 - total flux cleaned = 1.78132e-05 Jy ! Component: 150 - total flux cleaned = 6.07263e-05 Jy ! Component: 200 - total flux cleaned = 0.000101257 Jy ! Total flux subtracted in 200 components = 0.000101257 Jy ! Clean residual min=-0.003424 max=0.002647 Jy/beam ! Clean residual mean=-0.000003 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.0843588 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.0843588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064917Jy sigma=0.456292 ! Fit after self-cal, rms=0.064911Jy sigma=0.456280 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064911Jy sigma=0.456280 ! Fit after self-cal, rms=0.064526Jy sigma=0.456237 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.632 mas, bmaj=18.22 mas, bpa=-17.65 degrees ! Estimated noise=1.69707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000780015 Jy ! Component: 100 - total flux cleaned = 0.000892141 Jy ! Component: 150 - total flux cleaned = 0.000972706 Jy ! Component: 200 - total flux cleaned = 0.00101067 Jy ! Total flux subtracted in 200 components = 0.00101067 Jy ! Clean residual min=-0.003408 max=0.002648 Jy/beam ! Clean residual mean=-0.000003 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.0853695 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.0853695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064506Jy sigma=0.456135 ! Fit after self-cal, rms=0.064500Jy sigma=0.456127 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.25946e-05 Jy ! Component: 100 - total flux cleaned = 4.03625e-05 Jy ! Component: 150 - total flux cleaned = 5.73753e-05 Jy ! Component: 200 - total flux cleaned = 7.43648e-05 Jy ! Total flux subtracted in 200 components = 7.43648e-05 Jy ! Clean residual min=-0.003405 max=0.002634 Jy/beam ! Clean residual mean=-0.000003 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.0854438 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 81 components and 0.0854438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064488Jy sigma=0.456060 ! Fit after self-cal, rms=0.064485Jy sigma=0.456054 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064485Jy sigma=0.456054 ! Fit after self-cal, rms=0.064235Jy sigma=0.456032 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.03 mas, bmaj=21.03 mas, bpa=-10.59 degrees ! Estimated noise=1.94513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000746556 Jy ! Component: 100 - total flux cleaned = 0.00101303 Jy ! Component: 150 - total flux cleaned = 0.00103404 Jy ! Component: 200 - total flux cleaned = 0.00105221 Jy ! Total flux subtracted in 200 components = 0.00105221 Jy ! Clean residual min=-0.003290 max=0.002818 Jy/beam ! Clean residual mean=-0.000003 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.0864961 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 0.0864961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064229Jy sigma=0.456033 ! Fit after self-cal, rms=0.064224Jy sigma=0.456020 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115038 Jy ! Component: 100 - total flux cleaned = 0.000135876 Jy ! Component: 150 - total flux cleaned = 0.000144495 Jy ! Component: 200 - total flux cleaned = 0.000152028 Jy ! Total flux subtracted in 200 components = 0.000152028 Jy ! Clean residual min=-0.003299 max=0.002794 Jy/beam ! Clean residual mean=-0.000003 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.0866481 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 104 components and 0.0866481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064222Jy sigma=0.456020 ! Fit after self-cal, rms=0.064223Jy sigma=0.456015 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=18.17 mas, bpa=-17.66 degrees ! Estimated noise=1.69614 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.616 x 18.17 at -17.66 degrees (North through East) ! Clean map min=-0.00324 max=0.066685 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=17.32 mas, bpa=-18.23 degrees ! Estimated noise=2.20025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0519472 Jy ! Component: 100 - total flux cleaned = 0.0672566 Jy ! Component: 150 - total flux cleaned = 0.0742074 Jy ! Component: 200 - total flux cleaned = 0.0783438 Jy ! Total flux subtracted in 200 components = 0.0783438 Jy ! Clean residual min=-0.004359 max=0.003782 Jy/beam ! Clean residual mean=-0.000001 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.0783438 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0783438 Jy ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=18.17 mas, bpa=-17.66 degrees ! Estimated noise=1.69614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384222 Jy ! Component: 100 - total flux cleaned = 0.00493138 Jy ! Component: 150 - total flux cleaned = 0.00565675 Jy ! Component: 200 - total flux cleaned = 0.00630924 Jy ! Total flux subtracted in 200 components = 0.00630924 Jy ! Clean residual min=-0.003571 max=0.002718 Jy/beam ! Clean residual mean=-0.000003 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.084653 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 59 components and 0.084653 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.03 mas, bmaj=21.03 mas, bpa=-10.59 degrees ! Estimated noise=1.94513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110912 Jy ! Component: 100 - total flux cleaned = 0.0013108 Jy ! Component: 150 - total flux cleaned = 0.00149115 Jy ! Component: 200 - total flux cleaned = 0.00154624 Jy ! Total flux subtracted in 200 components = 0.00154624 Jy ! Clean residual min=-0.003369 max=0.002781 Jy/beam ! Clean residual mean=-0.000003 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.0861993 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.89672e-05 Jy ! Component: 100 - total flux cleaned = 9.33632e-05 Jy ! Component: 150 - total flux cleaned = 0.000145881 Jy ! Component: 200 - total flux cleaned = 0.000180842 Jy ! Total flux subtracted in 200 components = 0.000180842 Jy ! Clean residual min=-0.003345 max=0.002778 Jy/beam ! Clean residual mean=-0.000003 rms=0.000843 Jy/beam ! Combined flux in latest and established models = 0.0863801 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 92 components and 0.0863802 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=18.17 mas, bpa=-17.66 degrees ! Estimated noise=1.69614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155136 Jy ! Component: 100 - total flux cleaned = 9.86823e-05 Jy ! Component: 150 - total flux cleaned = 0.000123173 Jy ! Component: 200 - total flux cleaned = 0.000145766 Jy ! Total flux subtracted in 200 components = 0.000145766 Jy ! Clean residual min=-0.003383 max=0.002650 Jy/beam ! Clean residual mean=-0.000003 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.0865259 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 109 components and 0.0865259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.064268Jy sigma=0.456193 ! Fit after self-cal, rms=0.064280Jy sigma=0.456169 wmodel J2317-1122_S_map.mod ! Writing 109 model components to file: J2317-1122_S_map.mod wobs J2317-1122_S_uvs.fits ! Writing UV FITS file: J2317-1122_S_uvs.fits wwins J2317-1122_S_map.win ! wwins: Wrote 1 windows to J2317-1122_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112618 Jy ! Component: 100 - total flux cleaned = -0.00181134 Jy ! Component: 150 - total flux cleaned = -0.00221754 Jy ! Component: 200 - total flux cleaned = -0.00272807 Jy ! Component: 250 - total flux cleaned = -0.00313232 Jy ! Component: 300 - total flux cleaned = -0.00336373 Jy ! Component: 350 - total flux cleaned = -0.00384595 Jy ! Component: 400 - total flux cleaned = -0.00416686 Jy ! Component: 450 - total flux cleaned = -0.00451077 Jy ! Component: 500 - total flux cleaned = -0.00474411 Jy ! Component: 550 - total flux cleaned = -0.00487458 Jy ! Component: 600 - total flux cleaned = -0.00512655 Jy ! Component: 650 - total flux cleaned = -0.00524906 Jy ! Component: 700 - total flux cleaned = -0.00542846 Jy ! Component: 750 - total flux cleaned = -0.00551625 Jy ! Component: 800 - total flux cleaned = -0.00563124 Jy ! Component: 850 - total flux cleaned = -0.00577196 Jy ! Component: 900 - total flux cleaned = -0.00599108 Jy ! Component: 950 - total flux cleaned = -0.00604485 Jy ! Component: 1000 - total flux cleaned = -0.00620279 Jy ! Component: 1050 - total flux cleaned = -0.00633154 Jy ! Component: 1100 - total flux cleaned = -0.00650842 Jy ! Component: 1150 - total flux cleaned = -0.00655772 Jy ! Component: 1200 - total flux cleaned = -0.00670424 Jy ! Component: 1250 - total flux cleaned = -0.00684809 Jy ! Component: 1300 - total flux cleaned = -0.00696569 Jy ! Component: 1350 - total flux cleaned = -0.00710389 Jy ! Component: 1400 - total flux cleaned = -0.00723987 Jy ! Component: 1450 - total flux cleaned = -0.00730696 Jy ! Component: 1500 - total flux cleaned = -0.00739531 Jy ! Component: 1550 - total flux cleaned = -0.0074388 Jy ! Component: 1600 - total flux cleaned = -0.00752397 Jy ! Component: 1650 - total flux cleaned = -0.00762863 Jy ! Component: 1700 - total flux cleaned = -0.00762839 Jy ! Component: 1750 - total flux cleaned = -0.00771003 Jy ! Component: 1800 - total flux cleaned = -0.00775009 Jy ! Component: 1850 - total flux cleaned = -0.00786902 Jy ! Component: 1900 - total flux cleaned = -0.00786915 Jy ! Component: 1950 - total flux cleaned = -0.00792747 Jy ! Component: 2000 - total flux cleaned = -0.00794683 Jy ! Component: 2050 - total flux cleaned = -0.00798502 Jy ! Component: 2100 - total flux cleaned = -0.00805968 Jy ! Component: 2150 - total flux cleaned = -0.00804154 Jy ! Component: 2200 - total flux cleaned = -0.00809587 Jy ! Component: 2250 - total flux cleaned = -0.00807787 Jy ! Component: 2300 - total flux cleaned = -0.00806023 Jy ! Component: 2350 - total flux cleaned = -0.0080954 Jy ! Component: 2400 - total flux cleaned = -0.00807781 Jy ! Component: 2450 - total flux cleaned = -0.00804353 Jy ! Component: 2500 - total flux cleaned = -0.00802663 Jy ! Component: 2550 - total flux cleaned = -0.00816206 Jy ! Component: 2600 - total flux cleaned = -0.00819511 Jy ! Component: 2650 - total flux cleaned = -0.00822829 Jy ! Component: 2700 - total flux cleaned = -0.00832686 Jy ! Component: 2750 - total flux cleaned = -0.0082944 Jy ! Component: 2800 - total flux cleaned = -0.00835906 Jy ! Component: 2850 - total flux cleaned = -0.00840714 Jy ! Component: 2900 - total flux cleaned = -0.00837564 Jy ! Component: 2950 - total flux cleaned = -0.00845421 Jy ! Component: 3000 - total flux cleaned = -0.00843854 Jy ! Component: 3050 - total flux cleaned = -0.00848495 Jy ! Component: 3100 - total flux cleaned = -0.00848498 Jy ! Component: 3150 - total flux cleaned = -0.00853057 Jy ! Component: 3200 - total flux cleaned = -0.00856052 Jy ! Component: 3250 - total flux cleaned = -0.00856065 Jy ! Component: 3300 - total flux cleaned = -0.00860503 Jy ! Component: 3350 - total flux cleaned = -0.00856093 Jy ! Component: 3400 - total flux cleaned = -0.00856108 Jy ! Component: 3450 - total flux cleaned = -0.00861908 Jy ! Component: 3500 - total flux cleaned = -0.00863341 Jy ! Component: 3550 - total flux cleaned = -0.00864767 Jy ! Component: 3600 - total flux cleaned = -0.00873263 Jy ! Component: 3650 - total flux cleaned = -0.00871849 Jy ! Component: 3700 - total flux cleaned = -0.00880232 Jy ! Component: 3750 - total flux cleaned = -0.00881603 Jy ! Component: 3800 - total flux cleaned = -0.00881597 Jy ! Component: 3850 - total flux cleaned = -0.00884339 Jy ! Component: 3900 - total flux cleaned = -0.00885694 Jy ! Component: 3950 - total flux cleaned = -0.00885701 Jy ! Component: 4000 - total flux cleaned = -0.00888385 Jy ! Component: 4050 - total flux cleaned = -0.00892378 Jy ! Total flux subtracted in 4096 components = -0.00895019 Jy ! Clean residual min=-0.000993 max=0.000767 Jy/beam ! Clean residual mean=-0.000003 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.0775757 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 387 components and 0.0775758 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2317-1122_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.616 x 18.17 at -17.66 degrees (North through East) ! Clean map min=-0.0021843 max=0.066579 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2317-1122_S_map.fits wmodel /image_prod/ug002_uva//J2317-1122_S_map.mod ! Writing 387 model components to file: /image_prod/ug002_uva//J2317-1122_S_map.mod wobs /image_prod/ug002_uva//J2317-1122_S_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2317-1122_S_uvs.fits wwins /image_prod/ug002_uva//J2317-1122_S_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J2317-1122_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0665791 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254632 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.14735 1.14735 2.29471 4.58941 9.17883 18.3577 36.7153 73.4306 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.066 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 261.471 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2317-1122_S_dfm.log closed on Thu Mar 5 06:10:33 2020