! Started logfile: /image_prod/ug002_uva//J2312+1615_S_dfm.log on Thu Mar  5 06:08:14 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2312+1615_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2312+1615_S_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.841975 visibilities/baseline/integration-bin.
! Found source: J2312+1615
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 5115 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2312+1615_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000936Jy  sigma=8.712548
! Fit after  self-cal, rms=0.912026Jy  sigma=7.934209
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.856 mas, bmaj=6.915 mas, bpa=-7.847 degrees
! Estimated noise=1.52841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0700099 Jy
! Component: 100  -  total flux cleaned = 0.0852766 Jy
! Total flux subtracted in 100 components = 0.0852766 Jy
! Clean residual min=-0.003538 max=0.004258 Jy/beam
! Clean residual mean=-0.000001 rms=0.000803 Jy/beam
! Combined flux in latest and established models = 0.0852766 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.0852766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.058086Jy  sigma=0.430851
! Fit after  self-cal, rms=0.058014Jy  sigma=0.429529
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.352 mas, bmaj=7.543 mas, bpa=-6.928 degrees
! Estimated noise=1.1772 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247981 Jy
! Component: 100  -  total flux cleaned = 0.00207276 Jy
! Component: 150  -  total flux cleaned = 0.0016905 Jy
! Component: 200  -  total flux cleaned = 0.00142704 Jy
! Total flux subtracted in 200 components = 0.00142704 Jy
! Clean residual min=-0.003230 max=0.002624 Jy/beam
! Clean residual mean=0.000005 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.0867037 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0867037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057758Jy  sigma=0.427720
! Fit after  self-cal, rms=0.057740Jy  sigma=0.427703
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.352 x 7.543 at -6.928 degrees (North through East)
! Clean map  min=-0.003097  max=0.08962 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.99     KP        1.03     
!   LA        1.05     MK        0.98     NL        1.03     OV        1.09     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.97     KP        0.99     
!   LA        0.99     MK        1.02     NL        0.98     OV        0.94     
!   PT        0.97     SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.98     KP        1.01     
!   LA        0.99     MK        0.95     NL        1.18     OV        0.94     
!   PT        0.95     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.057740Jy  sigma=0.427703
! Fit after  self-cal, rms=0.056404Jy  sigma=0.424601
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.318 mas, bmaj=7.488 mas, bpa=-6.562 degrees
! Estimated noise=1.16897 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000333961 Jy
! Component: 100  -  total flux cleaned = -0.000265204 Jy
! Component: 150  -  total flux cleaned = -0.000226294 Jy
! Component: 200  -  total flux cleaned = -0.000208936 Jy
! Total flux subtracted in 200 components = -0.000208936 Jy
! Clean residual min=-0.002795 max=0.002352 Jy/beam
! Clean residual mean=0.000004 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.0864947 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 22 components and 0.0864948 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056383Jy  sigma=0.424446
! Fit after  self-cal, rms=0.056380Jy  sigma=0.424382
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.056380Jy  sigma=0.424382
! Fit after  self-cal, rms=0.057216Jy  sigma=0.418760
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=7.476 mas, bpa=-6.423 degrees
! Estimated noise=1.17095 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.24866e-05 Jy
! Component: 100  -  total flux cleaned = 5.14505e-05 Jy
! Component: 150  -  total flux cleaned = 1.88366e-05 Jy
! Component: 200  -  total flux cleaned = 5.65376e-06 Jy
! Total flux subtracted in 200 components = 5.65376e-06 Jy
! Clean residual min=-0.002042 max=0.001742 Jy/beam
! Clean residual mean=0.000002 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.0865004 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 29 components and 0.0865004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057206Jy  sigma=0.418655
! Fit after  self-cal, rms=0.057232Jy  sigma=0.418592
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.15007e-05 Jy
! Component: 100  -  total flux cleaned = -2.11953e-05 Jy
! Component: 150  -  total flux cleaned = -1.70471e-06 Jy
! Component: 200  -  total flux cleaned = 1.68995e-05 Jy
! Total flux subtracted in 200 components = 1.68995e-05 Jy
! Clean residual min=-0.002064 max=0.001759 Jy/beam
! Clean residual mean=0.000002 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.0865173 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 34 components and 0.0865173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057228Jy  sigma=0.418562
! Fit after  self-cal, rms=0.057228Jy  sigma=0.418562
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057228Jy  sigma=0.418562
! Fit after  self-cal, rms=0.057517Jy  sigma=0.418502
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.316 mas, bmaj=7.477 mas, bpa=-6.381 degrees
! Estimated noise=1.1711 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114824 Jy
! Component: 100  -  total flux cleaned = 0.000136917 Jy
! Component: 150  -  total flux cleaned = 0.000156522 Jy
! Component: 200  -  total flux cleaned = 0.00017487 Jy
! Total flux subtracted in 200 components = 0.00017487 Jy
! Clean residual min=-0.001971 max=0.001689 Jy/beam
! Clean residual mean=0.000001 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.0866922 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 38 components and 0.0866922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057513Jy  sigma=0.418464
! Fit after  self-cal, rms=0.057516Jy  sigma=0.418463
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.98793e-08 Jy
! Component: 100  -  total flux cleaned = 8.54649e-06 Jy
! Component: 150  -  total flux cleaned = 1.67445e-05 Jy
! Component: 200  -  total flux cleaned = 2.47711e-05 Jy
! Total flux subtracted in 200 components = 2.47711e-05 Jy
! Clean residual min=-0.001975 max=0.001687 Jy/beam
! Clean residual mean=0.000001 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.086717 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 41 components and 0.086717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057513Jy  sigma=0.418446
! Fit after  self-cal, rms=0.057513Jy  sigma=0.418446
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057513Jy  sigma=0.418446
! Fit after  self-cal, rms=0.057516Jy  sigma=0.418440
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.527 mas, bmaj=10.97 mas, bpa=-9.023 degrees
! Estimated noise=1.42374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000276584 Jy
! Component: 100  -  total flux cleaned = 0.000311805 Jy
! Component: 150  -  total flux cleaned = 0.000330464 Jy
! Component: 200  -  total flux cleaned = 0.000341263 Jy
! Total flux subtracted in 200 components = 0.000341263 Jy
! Clean residual min=-0.001795 max=0.001948 Jy/beam
! Clean residual mean=0.000004 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.0870582 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 47 components and 0.0870582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057514Jy  sigma=0.418437
! Fit after  self-cal, rms=0.057515Jy  sigma=0.418434
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.59028e-06 Jy
! Component: 100  -  total flux cleaned = -7.74032e-06 Jy
! Component: 150  -  total flux cleaned = 2.00676e-06 Jy
! Component: 200  -  total flux cleaned = 1.08699e-05 Jy
! Total flux subtracted in 200 components = 1.08699e-05 Jy
! Clean residual min=-0.001796 max=0.001950 Jy/beam
! Clean residual mean=0.000004 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.0870691 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 47 components and 0.0870691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057515Jy  sigma=0.418433
! Fit after  self-cal, rms=0.057515Jy  sigma=0.418432
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.312 mas, bmaj=7.478 mas, bpa=-6.37 degrees
! Estimated noise=1.1717 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.312 x 7.478 at -6.37 degrees (North through East)
! Clean map  min=-0.001905  max=0.089017 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.82 mas, bmaj=6.852 mas, bpa=-7.353 degrees
! Estimated noise=1.51548 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0694029 Jy
! Component: 100  -  total flux cleaned = 0.0845373 Jy
! Component: 150  -  total flux cleaned = 0.0872241 Jy
! Component: 200  -  total flux cleaned = 0.0874103 Jy
! Total flux subtracted in 200 components = 0.0874103 Jy
! Clean residual min=-0.002621 max=0.002486 Jy/beam
! Clean residual mean=-0.000003 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.0874103 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0874103 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.312 mas, bmaj=7.478 mas, bpa=-6.37 degrees
! Estimated noise=1.1717 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000394836 Jy
! Component: 100  -  total flux cleaned = -0.000522345 Jy
! Component: 150  -  total flux cleaned = -0.000545382 Jy
! Component: 200  -  total flux cleaned = -0.000562609 Jy
! Total flux subtracted in 200 components = -0.000562609 Jy
! Clean residual min=-0.001980 max=0.001693 Jy/beam
! Clean residual mean=0.000001 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.0868477 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.0868477 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.527 mas, bmaj=10.97 mas, bpa=-9.023 degrees
! Estimated noise=1.42374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111942 Jy
! Component: 100  -  total flux cleaned = 0.000112051 Jy
! Component: 150  -  total flux cleaned = 0.000134888 Jy
! Component: 200  -  total flux cleaned = 0.000147189 Jy
! Total flux subtracted in 200 components = 0.000147189 Jy
! Clean residual min=-0.001807 max=0.001962 Jy/beam
! Clean residual mean=0.000004 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.0869948 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.16426e-07 Jy
! Component: 100  -  total flux cleaned = 1.55823e-07 Jy
! Component: 150  -  total flux cleaned = 2.69525e-07 Jy
! Component: 200  -  total flux cleaned = 4.46167e-07 Jy
! Total flux subtracted in 200 components = 4.46167e-07 Jy
! Clean residual min=-0.001802 max=0.001960 Jy/beam
! Clean residual mean=0.000004 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.0869953 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 29 components and 0.0869953 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.312 mas, bmaj=7.478 mas, bpa=-6.37 degrees
! Estimated noise=1.1717 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000324232 Jy
! Component: 100  -  total flux cleaned = -0.00035909 Jy
! Component: 150  -  total flux cleaned = -0.000344177 Jy
! Component: 200  -  total flux cleaned = -0.000330164 Jy
! Total flux subtracted in 200 components = -0.000330164 Jy
! Clean residual min=-0.001973 max=0.001680 Jy/beam
! Clean residual mean=0.000001 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.0866651 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 0.0866652 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.057526Jy  sigma=0.418532
! Fit after  self-cal, rms=0.057531Jy  sigma=0.418526
wmodel J2312+1615_S_map.mod
! Writing 38 model components to file: J2312+1615_S_map.mod
wobs   J2312+1615_S_uvs.fits
! Writing UV FITS file: J2312+1615_S_uvs.fits
wwins  J2312+1615_S_map.win
! wwins: Wrote 1 windows to J2312+1615_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000462989 Jy
! Component: 100  -  total flux cleaned = -0.000370966 Jy
! Component: 150  -  total flux cleaned = -0.000311813 Jy
! Component: 200  -  total flux cleaned = -0.000339063 Jy
! Component: 250  -  total flux cleaned = -0.000256938 Jy
! Component: 300  -  total flux cleaned = -0.000152356 Jy
! Component: 350  -  total flux cleaned = -0.000152921 Jy
! Component: 400  -  total flux cleaned = -2.76052e-05 Jy
! Component: 450  -  total flux cleaned = 7.05541e-05 Jy
! Component: 500  -  total flux cleaned = 0.000190414 Jy
! Component: 550  -  total flux cleaned = 0.000237747 Jy
! Component: 600  -  total flux cleaned = 0.000376989 Jy
! Component: 650  -  total flux cleaned = 0.000490116 Jy
! Component: 700  -  total flux cleaned = 0.000557193 Jy
! Component: 750  -  total flux cleaned = 0.000601401 Jy
! Component: 800  -  total flux cleaned = 0.000666107 Jy
! Component: 850  -  total flux cleaned = 0.000729837 Jy
! Component: 900  -  total flux cleaned = 0.000729527 Jy
! Component: 950  -  total flux cleaned = 0.000688362 Jy
! Component: 1000  -  total flux cleaned = 0.000790694 Jy
! Component: 1050  -  total flux cleaned = 0.000770142 Jy
! Component: 1100  -  total flux cleaned = 0.000730109 Jy
! Component: 1150  -  total flux cleaned = 0.000690707 Jy
! Component: 1200  -  total flux cleaned = 0.000632718 Jy
! Component: 1250  -  total flux cleaned = 0.000632701 Jy
! Component: 1300  -  total flux cleaned = 0.000576237 Jy
! Component: 1350  -  total flux cleaned = 0.000538822 Jy
! Component: 1400  -  total flux cleaned = 0.000520267 Jy
! Component: 1450  -  total flux cleaned = 0.000483519 Jy
! Component: 1500  -  total flux cleaned = 0.000447339 Jy
! Component: 1550  -  total flux cleaned = 0.000429156 Jy
! Component: 1600  -  total flux cleaned = 0.000393601 Jy
! Component: 1650  -  total flux cleaned = 0.000393961 Jy
! Component: 1700  -  total flux cleaned = 0.000341778 Jy
! Component: 1750  -  total flux cleaned = 0.000358857 Jy
! Component: 1800  -  total flux cleaned = 0.000392892 Jy
! Component: 1850  -  total flux cleaned = 0.000308032 Jy
! Component: 1900  -  total flux cleaned = 0.000307954 Jy
! Component: 1950  -  total flux cleaned = 0.00029125 Jy
! Component: 2000  -  total flux cleaned = 0.000307748 Jy
! Component: 2050  -  total flux cleaned = 0.000275134 Jy
! Component: 2100  -  total flux cleaned = 0.000259057 Jy
! Component: 2150  -  total flux cleaned = 0.000323043 Jy
! Component: 2200  -  total flux cleaned = 0.0002754 Jy
! Component: 2250  -  total flux cleaned = 0.000228388 Jy
! Component: 2300  -  total flux cleaned = 0.000275221 Jy
! Component: 2350  -  total flux cleaned = 0.00022873 Jy
! Component: 2400  -  total flux cleaned = 0.000228871 Jy
! Component: 2450  -  total flux cleaned = 0.000304962 Jy
! Component: 2500  -  total flux cleaned = 0.000289806 Jy
! Component: 2550  -  total flux cleaned = 0.000304791 Jy
! Component: 2600  -  total flux cleaned = 0.000275028 Jy
! Component: 2650  -  total flux cleaned = 0.000275013 Jy
! Component: 2700  -  total flux cleaned = 0.000348051 Jy
! Component: 2750  -  total flux cleaned = 0.000304514 Jy
! Component: 2800  -  total flux cleaned = 0.000347914 Jy
! Component: 2850  -  total flux cleaned = 0.000290721 Jy
! Component: 2900  -  total flux cleaned = 0.000304967 Jy
! Component: 2950  -  total flux cleaned = 0.000290956 Jy
! Component: 3000  -  total flux cleaned = 0.000290987 Jy
! Component: 3050  -  total flux cleaned = 0.00024926 Jy
! Component: 3100  -  total flux cleaned = 0.000235422 Jy
! Component: 3150  -  total flux cleaned = 0.000221804 Jy
! Component: 3200  -  total flux cleaned = 0.000208311 Jy
! Component: 3250  -  total flux cleaned = 0.000208149 Jy
! Component: 3300  -  total flux cleaned = 0.000167721 Jy
! Component: 3350  -  total flux cleaned = 0.000114461 Jy
! Component: 3400  -  total flux cleaned = 7.49458e-05 Jy
! Component: 3450  -  total flux cleaned = 7.50452e-05 Jy
! Component: 3500  -  total flux cleaned = 8.81767e-05 Jy
! Component: 3550  -  total flux cleaned = 3.64253e-05 Jy
! Component: 3600  -  total flux cleaned = 3.6315e-05 Jy
! Component: 3650  -  total flux cleaned = 3.63918e-05 Jy
! Component: 3700  -  total flux cleaned = 1.10284e-05 Jy
! Component: 3750  -  total flux cleaned = 3.61699e-05 Jy
! Component: 3800  -  total flux cleaned = 2.35674e-05 Jy
! Component: 3850  -  total flux cleaned = 2.35557e-05 Jy
! Component: 3900  -  total flux cleaned = -2.60552e-05 Jy
! Component: 3950  -  total flux cleaned = -5.06775e-05 Jy
! Component: 4000  -  total flux cleaned = -1.40196e-05 Jy
! Component: 4050  -  total flux cleaned = -7.47379e-05 Jy
! Total flux subtracted in 4096 components = -1.43723e-05 Jy
! Clean residual min=-0.000823 max=0.000652 Jy/beam
! Clean residual mean=-0.000000 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0866508 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 327 components and 0.0866508 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2312+1615_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.312 x 7.478 at -6.37 degrees (North through East)
! Clean map  min=-0.001413  max=0.088957 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2312+1615_S_map.fits
wmodel /image_prod/ug002_uva//J2312+1615_S_map.mod
! Writing 327 model components to file: /image_prod/ug002_uva//J2312+1615_S_map.mod
wobs   /image_prod/ug002_uva//J2312+1615_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2312+1615_S_uvs.fits
wwins  /image_prod/ug002_uva//J2312+1615_S_map.win
! wwins: Wrote 2 windows to /image_prod/ug002_uva//J2312+1615_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0889569 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000219174 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.739148 0.739148 1.4783 2.95659 5.91318 11.8264 23.6527 47.3055 94.6109
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.088 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  405.872 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2312+1615_S_dfm.log closed on Thu Mar  5 06:08:17 2020