! Started logfile: /image_prod/ug002_uva//J2307-2247_X_dfm.log on Thu Mar 5 06:06:11 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2307-2247_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2307-2247_X_uva.fits ! AN table 1: 50 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.981778 visibilities/baseline/integration-bin. ! Found source: J2307-2247 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 26508 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2307-2247_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.023694Jy sigma=8.576625 ! Fit after self-cal, rms=0.837830Jy sigma=7.059369 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6192 mas, bmaj=1.688 mas, bpa=-4.029 degrees ! Estimated noise=1.1101 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113326 Jy ! Component: 100 - total flux cleaned = 0.150585 Jy ! Total flux subtracted in 100 components = 0.150585 Jy ! Clean residual min=-0.013900 max=0.049992 Jy/beam ! Clean residual mean=-0.000026 rms=0.003734 Jy/beam ! Combined flux in latest and established models = 0.150585 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.150585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.114878Jy sigma=0.926966 ! Fit after self-cal, rms=0.114791Jy sigma=0.926280 ! Inverting map ! Added new window around map position (2, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410236 Jy ! Component: 100 - total flux cleaned = 0.0614697 Jy ! Total flux subtracted in 100 components = 0.0614697 Jy ! Clean residual min=-0.010621 max=0.025502 Jy/beam ! Clean residual mean=-0.000017 rms=0.002498 Jy/beam ! Combined flux in latest and established models = 0.212054 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.212054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091516Jy sigma=0.721849 ! Fit after self-cal, rms=0.088530Jy sigma=0.693989 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195988 Jy ! Component: 100 - total flux cleaned = 0.0310881 Jy ! Total flux subtracted in 100 components = 0.0310881 Jy ! Clean residual min=-0.007205 max=0.012895 Jy/beam ! Clean residual mean=-0.000011 rms=0.001836 Jy/beam ! Combined flux in latest and established models = 0.243143 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 28 components and 0.243143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080238Jy sigma=0.622733 ! Fit after self-cal, rms=0.079722Jy sigma=0.616873 ! Inverting map ! Added new window around map position (4.2, 3.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138969 Jy ! Component: 100 - total flux cleaned = 0.0235952 Jy ! Total flux subtracted in 100 components = 0.0235952 Jy ! Clean residual min=-0.006519 max=0.008966 Jy/beam ! Clean residual mean=-0.000009 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 0.266738 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 40 components and 0.266738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074595Jy sigma=0.569259 ! Fit after self-cal, rms=0.074422Jy sigma=0.566636 ! Inverting map ! Added new window around map position (5, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102027 Jy ! Component: 100 - total flux cleaned = 0.0179896 Jy ! Total flux subtracted in 100 components = 0.0179896 Jy ! Clean residual min=-0.005250 max=0.007049 Jy/beam ! Clean residual mean=-0.000008 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.284727 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.284727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071363Jy sigma=0.538178 ! Fit after self-cal, rms=0.071293Jy sigma=0.536896 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8023 mas, bmaj=2.083 mas, bpa=-3.451 degrees ! Estimated noise=0.531782 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014965 Jy ! Component: 100 - total flux cleaned = 0.0254195 Jy ! Component: 150 - total flux cleaned = 0.0333203 Jy ! Component: 200 - total flux cleaned = 0.0394835 Jy ! Total flux subtracted in 200 components = 0.0394835 Jy ! Clean residual min=-0.005806 max=0.009825 Jy/beam ! Clean residual mean=-0.000007 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.324211 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 83 components and 0.324211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067053Jy sigma=0.498948 ! Fit after self-cal, rms=0.066837Jy sigma=0.495991 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8023 x 2.083 at -3.451 degrees (North through East) ! Clean map min=-0.0054363 max=0.14452 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.99 HN 1.03 KP 1.01 ! LA 1.02 MK 1.06 NL 1.15 OV 0.94 ! PT 0.90 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.02 KP 1.00 ! LA 1.02 MK 1.06 NL 1.13 OV 0.95 ! PT 0.91 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.01 KP 1.01 ! LA 1.04 MK 1.07 NL 1.13 OV 0.91 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.06 KP 1.01 ! LA 1.04 MK 1.02 NL 1.12 OV 0.93 ! PT 0.90 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 1.03 KP 1.03 ! LA 1.01 MK 1.05 NL 1.16 OV 0.94 ! PT 0.90 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.99 HN 1.01 KP 1.02 ! LA 1.04 MK 1.05 NL 1.15 OV 0.93 ! PT 0.91 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.02 KP 1.01 ! LA 1.03 MK 1.06 NL 1.12 OV 0.93 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.02 KP 1.03 ! LA 1.04 MK 1.01 NL 1.13 OV 0.92 ! PT 0.89 SC 1.06 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.01 KP 1.03 ! LA 1.03 MK 1.07 NL 1.16 OV 0.92 ! PT 0.93 SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.00 KP 1.02 ! LA 1.04 MK 1.01 NL 1.13 OV 0.95 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.01 KP 1.04 ! LA 1.01 MK 1.00 NL 1.14 OV 0.93 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.03 KP 1.01 ! LA 1.02 MK 1.02 NL 1.11 OV 0.95 ! PT 0.92 SC 1.08 ! ! ! Fit before self-cal, rms=0.066837Jy sigma=0.495991 ! Fit after self-cal, rms=0.065468Jy sigma=0.479818 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8144 mas, bmaj=2.103 mas, bpa=-3.14 degrees ! Estimated noise=0.536179 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00523833 Jy ! Component: 100 - total flux cleaned = 0.00658612 Jy ! Component: 150 - total flux cleaned = 0.0072559 Jy ! Component: 200 - total flux cleaned = 0.00747693 Jy ! Total flux subtracted in 200 components = 0.00747693 Jy ! Clean residual min=-0.002358 max=0.003361 Jy/beam ! Clean residual mean=-0.000000 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.331688 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 106 components and 0.331688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064948Jy sigma=0.474127 ! Fit after self-cal, rms=0.064934Jy sigma=0.473595 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064934Jy sigma=0.473595 ! Fit after self-cal, rms=0.065329Jy sigma=0.472779 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8164 mas, bmaj=2.109 mas, bpa=-3.12 degrees ! Estimated noise=0.538835 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012639 Jy ! Component: 100 - total flux cleaned = 0.00165284 Jy ! Component: 150 - total flux cleaned = 0.00184213 Jy ! Component: 200 - total flux cleaned = 0.00189601 Jy ! Total flux subtracted in 200 components = 0.00189601 Jy ! Clean residual min=-0.001875 max=0.002564 Jy/beam ! Clean residual mean=-0.000001 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.333584 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 0.333584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065172Jy sigma=0.471463 ! Fit after self-cal, rms=0.065178Jy sigma=0.471329 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173022 Jy ! Component: 100 - total flux cleaned = 0.00230194 Jy ! Component: 150 - total flux cleaned = 0.00269267 Jy ! Component: 200 - total flux cleaned = 0.00304347 Jy ! Total flux subtracted in 200 components = 0.00304347 Jy ! Clean residual min=-0.001700 max=0.001938 Jy/beam ! Clean residual mean=0.000001 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.336627 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 126 components and 0.336627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065056Jy sigma=0.470338 ! Fit after self-cal, rms=0.065050Jy sigma=0.470301 ! Inverting map ! Added new window around map position (27.8, -36.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127654 Jy ! Component: 100 - total flux cleaned = 0.00156767 Jy ! Component: 150 - total flux cleaned = 0.00160972 Jy ! Component: 200 - total flux cleaned = 0.00160979 Jy ! Total flux subtracted in 200 components = 0.00160979 Jy ! Clean residual min=-0.001565 max=0.001603 Jy/beam ! Clean residual mean=0.000001 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.338237 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 137 components and 0.338237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064973Jy sigma=0.469711 ! Fit after self-cal, rms=0.064970Jy sigma=0.469691 ! Inverting map ! Added new window around map position (22.4, -26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114421 Jy ! Component: 100 - total flux cleaned = 0.00132976 Jy ! Component: 150 - total flux cleaned = 0.00153572 Jy ! Component: 200 - total flux cleaned = 0.00169661 Jy ! Total flux subtracted in 200 components = 0.00169661 Jy ! Clean residual min=-0.001484 max=0.001463 Jy/beam ! Clean residual mean=0.000001 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.339934 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 142 components and 0.339934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064919Jy sigma=0.469320 ! Fit after self-cal, rms=0.064918Jy sigma=0.469308 ! Inverting map ! Added new window around map position (15, 31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000847157 Jy ! Component: 100 - total flux cleaned = 0.000812403 Jy ! Component: 150 - total flux cleaned = 0.0010342 Jy ! Component: 200 - total flux cleaned = 0.00115219 Jy ! Total flux subtracted in 200 components = 0.00115219 Jy ! Clean residual min=-0.001391 max=0.001326 Jy/beam ! Clean residual mean=0.000000 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.341086 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 157 components and 0.341086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064872Jy sigma=0.469013 ! Fit after self-cal, rms=0.064870Jy sigma=0.468993 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064870Jy sigma=0.468993 ! Fit after self-cal, rms=0.065222Jy sigma=0.468213 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.817 mas, bmaj=2.111 mas, bpa=-3.103 degrees ! Estimated noise=0.539261 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000373699 Jy ! Component: 100 - total flux cleaned = 0.000537267 Jy ! Component: 150 - total flux cleaned = 0.000626707 Jy ! Component: 200 - total flux cleaned = 0.000766886 Jy ! Total flux subtracted in 200 components = 0.000766886 Jy ! Clean residual min=-0.001277 max=0.001373 Jy/beam ! Clean residual mean=0.000000 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.341853 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 174 components and 0.341853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065192Jy sigma=0.468013 ! Fit after self-cal, rms=0.065198Jy sigma=0.468005 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23.6, -36.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541381 Jy ! Component: 100 - total flux cleaned = 0.000448349 Jy ! Component: 150 - total flux cleaned = 0.000529199 Jy ! Component: 200 - total flux cleaned = 0.000579662 Jy ! Total flux subtracted in 200 components = 0.000579662 Jy ! Clean residual min=-0.001188 max=0.001190 Jy/beam ! Clean residual mean=0.000000 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.342432 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 188 components and 0.342433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065158Jy sigma=0.467784 ! Fit after self-cal, rms=0.065158Jy sigma=0.467772 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065158Jy sigma=0.467772 ! Fit after self-cal, rms=0.065201Jy sigma=0.467749 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=5.098 mas, bpa=2.335 degrees ! Estimated noise=0.674036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000913346 Jy ! Component: 100 - total flux cleaned = 0.00135521 Jy ! Component: 150 - total flux cleaned = 0.00157165 Jy ! Component: 200 - total flux cleaned = 0.00174257 Jy ! Total flux subtracted in 200 components = 0.00174257 Jy ! Clean residual min=-0.001224 max=0.001092 Jy/beam ! Clean residual mean=0.000001 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.344175 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 202 components and 0.344175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065192Jy sigma=0.467680 ! Fit after self-cal, rms=0.065192Jy sigma=0.467677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.21406e-05 Jy ! Component: 100 - total flux cleaned = 0.000137947 Jy ! Component: 150 - total flux cleaned = 0.000200708 Jy ! Component: 200 - total flux cleaned = 0.000229573 Jy ! Total flux subtracted in 200 components = 0.000229573 Jy ! Clean residual min=-0.001162 max=0.001085 Jy/beam ! Clean residual mean=0.000001 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.344405 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 210 components and 0.344405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065185Jy sigma=0.467639 ! Fit after self-cal, rms=0.065185Jy sigma=0.467637 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.817 mas, bmaj=2.111 mas, bpa=-3.092 degrees ! Estimated noise=0.539239 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.817 x 2.111 at -3.092 degrees (North through East) ! Clean map min=-0.001012 max=0.14282 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6272 mas, bmaj=1.695 mas, bpa=-3.64 degrees ! Estimated noise=1.14744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12185 Jy ! Component: 100 - total flux cleaned = 0.172924 Jy ! Component: 150 - total flux cleaned = 0.201755 Jy ! Component: 200 - total flux cleaned = 0.222209 Jy ! Total flux subtracted in 200 components = 0.222209 Jy ! Clean residual min=-0.007221 max=0.012010 Jy/beam ! Clean residual mean=-0.000012 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 0.222209 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.222209 Jy ! Inverting map and beam ! Estimated beam: bmin=0.817 mas, bmaj=2.111 mas, bpa=-3.092 degrees ! Estimated noise=0.539239 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294641 Jy ! Component: 100 - total flux cleaned = 0.0504314 Jy ! Component: 150 - total flux cleaned = 0.0658242 Jy ! Component: 200 - total flux cleaned = 0.0771899 Jy ! Total flux subtracted in 200 components = 0.0771899 Jy ! Clean residual min=-0.003352 max=0.006484 Jy/beam ! Clean residual mean=-0.000010 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.299399 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 59 components and 0.299399 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00852919 Jy ! Component: 100 - total flux cleaned = 0.0150446 Jy ! Component: 150 - total flux cleaned = 0.020084 Jy ! Component: 200 - total flux cleaned = 0.0240818 Jy ! Total flux subtracted in 200 components = 0.0240818 Jy ! Clean residual min=-0.001898 max=0.002694 Jy/beam ! Clean residual mean=-0.000004 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.323481 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 92 components and 0.323481 Jy ! Inverting map ! Added new window around map position (5.8, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332909 Jy ! Component: 100 - total flux cleaned = 0.00608134 Jy ! Component: 150 - total flux cleaned = 0.00840955 Jy ! Component: 200 - total flux cleaned = 0.0104006 Jy ! Total flux subtracted in 200 components = 0.0104006 Jy ! Clean residual min=-0.001462 max=0.001620 Jy/beam ! Clean residual mean=-0.000001 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.333882 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 124 components and 0.333881 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=5.098 mas, bpa=2.335 degrees ! Estimated noise=0.674036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281594 Jy ! Component: 100 - total flux cleaned = 0.00471298 Jy ! Component: 150 - total flux cleaned = 0.00618316 Jy ! Component: 200 - total flux cleaned = 0.00723274 Jy ! Total flux subtracted in 200 components = 0.00723274 Jy ! Clean residual min=-0.001286 max=0.001412 Jy/beam ! Clean residual mean=0.000000 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.341114 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000636097 Jy ! Component: 100 - total flux cleaned = 0.00114811 Jy ! Component: 150 - total flux cleaned = 0.00162099 Jy ! Component: 200 - total flux cleaned = 0.00203512 Jy ! Total flux subtracted in 200 components = 0.00203512 Jy ! Clean residual min=-0.001153 max=0.001122 Jy/beam ! Clean residual mean=0.000001 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.343149 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 183 components and 0.343149 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.817 mas, bmaj=2.111 mas, bpa=-3.092 degrees ! Estimated noise=0.539239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311679 Jy ! Component: 100 - total flux cleaned = 0.000495126 Jy ! Component: 150 - total flux cleaned = 0.000661225 Jy ! Component: 200 - total flux cleaned = 0.000754375 Jy ! Total flux subtracted in 200 components = 0.000754375 Jy ! Clean residual min=-0.001081 max=0.001108 Jy/beam ! Clean residual mean=0.000000 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.343904 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 213 components and 0.343904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065175Jy sigma=0.467623 ! Fit after self-cal, rms=0.065164Jy sigma=0.467562 wmodel J2307-2247_X_map.mod ! Writing 213 model components to file: J2307-2247_X_map.mod wobs J2307-2247_X_uvs.fits ! Writing UV FITS file: J2307-2247_X_uvs.fits wwins J2307-2247_X_map.win ! wwins: Wrote 11 windows to J2307-2247_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137257 Jy ! Component: 100 - total flux cleaned = 0.000402093 Jy ! Component: 150 - total flux cleaned = 0.000546904 Jy ! Component: 200 - total flux cleaned = 0.000634012 Jy ! Component: 250 - total flux cleaned = 0.00066773 Jy ! Component: 300 - total flux cleaned = 0.00070062 Jy ! Component: 350 - total flux cleaned = 0.000652564 Jy ! Component: 400 - total flux cleaned = 0.000668428 Jy ! Component: 450 - total flux cleaned = 0.000668365 Jy ! Component: 500 - total flux cleaned = 0.000653096 Jy ! Component: 550 - total flux cleaned = 0.000652907 Jy ! Component: 600 - total flux cleaned = 0.000696409 Jy ! Component: 650 - total flux cleaned = 0.000725001 Jy ! Component: 700 - total flux cleaned = 0.000795501 Jy ! Component: 750 - total flux cleaned = 0.000837367 Jy ! Component: 800 - total flux cleaned = 0.000878457 Jy ! Component: 850 - total flux cleaned = 0.000946184 Jy ! Component: 900 - total flux cleaned = 0.000959492 Jy ! Component: 950 - total flux cleaned = 0.000998796 Jy ! Component: 1000 - total flux cleaned = 0.00102482 Jy ! Component: 1050 - total flux cleaned = 0.00105079 Jy ! Component: 1100 - total flux cleaned = 0.00115293 Jy ! Component: 1150 - total flux cleaned = 0.00115278 Jy ! Component: 1200 - total flux cleaned = 0.00117776 Jy ! Component: 1250 - total flux cleaned = 0.00123983 Jy ! Component: 1300 - total flux cleaned = 0.00130103 Jy ! Component: 1350 - total flux cleaned = 0.00131316 Jy ! Component: 1400 - total flux cleaned = 0.00138524 Jy ! Component: 1450 - total flux cleaned = 0.00139705 Jy ! Component: 1500 - total flux cleaned = 0.00143226 Jy ! Component: 1550 - total flux cleaned = 0.00143236 Jy ! Component: 1600 - total flux cleaned = 0.00148994 Jy ! Component: 1650 - total flux cleaned = 0.00150131 Jy ! Component: 1700 - total flux cleaned = 0.00150123 Jy ! Component: 1750 - total flux cleaned = 0.0014678 Jy ! Component: 1800 - total flux cleaned = 0.00146785 Jy ! Component: 1850 - total flux cleaned = 0.0015118 Jy ! Component: 1900 - total flux cleaned = 0.00147897 Jy ! Component: 1950 - total flux cleaned = 0.00148965 Jy ! Component: 2000 - total flux cleaned = 0.00144663 Jy ! Component: 2050 - total flux cleaned = 0.00141481 Jy ! Component: 2100 - total flux cleaned = 0.00141482 Jy ! Component: 2150 - total flux cleaned = 0.00143582 Jy ! Component: 2200 - total flux cleaned = 0.00142537 Jy ! Component: 2250 - total flux cleaned = 0.00141495 Jy ! Component: 2300 - total flux cleaned = 0.00146618 Jy ! Component: 2350 - total flux cleaned = 0.00145595 Jy ! Component: 2400 - total flux cleaned = 0.00142563 Jy ! Component: 2450 - total flux cleaned = 0.0014657 Jy ! Component: 2500 - total flux cleaned = 0.00149539 Jy ! Component: 2550 - total flux cleaned = 0.00146582 Jy ! Component: 2600 - total flux cleaned = 0.0014659 Jy ! Component: 2650 - total flux cleaned = 0.00152432 Jy ! Component: 2700 - total flux cleaned = 0.00149536 Jy ! Component: 2750 - total flux cleaned = 0.0015434 Jy ! Component: 2800 - total flux cleaned = 0.00155291 Jy ! Component: 2850 - total flux cleaned = 0.00154351 Jy ! Component: 2900 - total flux cleaned = 0.00154362 Jy ! Component: 2950 - total flux cleaned = 0.001609 Jy ! Component: 3000 - total flux cleaned = 0.00156265 Jy ! Component: 3050 - total flux cleaned = 0.00159957 Jy ! Component: 3100 - total flux cleaned = 0.00162711 Jy ! Component: 3150 - total flux cleaned = 0.00159979 Jy ! Component: 3200 - total flux cleaned = 0.0015727 Jy ! Component: 3250 - total flux cleaned = 0.00163556 Jy ! Component: 3300 - total flux cleaned = 0.00161766 Jy ! Component: 3350 - total flux cleaned = 0.00158213 Jy ! Component: 3400 - total flux cleaned = 0.00157331 Jy ! Component: 3450 - total flux cleaned = 0.0015646 Jy ! Component: 3500 - total flux cleaned = 0.00159078 Jy ! Component: 3550 - total flux cleaned = 0.00155613 Jy ! Component: 3600 - total flux cleaned = 0.00156473 Jy ! Component: 3650 - total flux cleaned = 0.00156479 Jy ! Component: 3700 - total flux cleaned = 0.00155632 Jy ! Component: 3750 - total flux cleaned = 0.0015732 Jy ! Component: 3800 - total flux cleaned = 0.00155632 Jy ! Component: 3850 - total flux cleaned = 0.00159819 Jy ! Component: 3900 - total flux cleaned = 0.00156486 Jy ! Component: 3950 - total flux cleaned = 0.00158138 Jy ! Component: 4000 - total flux cleaned = 0.00155663 Jy ! Component: 4050 - total flux cleaned = 0.00154843 Jy ! Total flux subtracted in 4096 components = 0.00156473 Jy ! Clean residual min=-0.000503 max=0.000536 Jy/beam ! Clean residual mean=0.000000 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.345469 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 496 components and 0.345469 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2307-2247_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.817 x 2.111 at -3.092 degrees (North through East) ! Clean map min=-0.00091854 max=0.14103 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2307-2247_X_map.fits wmodel /image_prod/ug002_uva//J2307-2247_X_map.mod ! Writing 496 model components to file: /image_prod/ug002_uva//J2307-2247_X_map.mod wobs /image_prod/ug002_uva//J2307-2247_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2307-2247_X_uvs.fits wwins /image_prod/ug002_uva//J2307-2247_X_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J2307-2247_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.14103 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000136266 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.289866 0.289866 0.579732 1.15946 2.31893 4.63786 9.27571 18.5514 37.1029 74.2057 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.141 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1034.96 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2307-2247_X_dfm.log closed on Thu Mar 5 06:06:17 2020