! Started logfile: /image_prod/ug002_uva//J2252+7043_S_dfm.log on Thu Mar  5 05:55:07 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2252+7043_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2252+7043_S_uva.fits
! AN table 1: 80 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.926389 visibilities/baseline/integration-bin.
! Found source: J2252+7043
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 8004 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2252+7043_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.029790Jy  sigma=7.587742
! Fit after  self-cal, rms=0.779887Jy  sigma=5.789158
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.584 mas, bmaj=4.804 mas, bpa=15.47 degrees
! Estimated noise=1.70947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.16063 Jy
! Component: 100  -  total flux cleaned = 0.202496 Jy
! Total flux subtracted in 100 components = 0.202496 Jy
! Clean residual min=-0.017505 max=0.040929 Jy/beam
! Clean residual mean=-0.000072 rms=0.004167 Jy/beam
! Combined flux in latest and established models = 0.202496 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.202496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.133737Jy  sigma=0.866754
! Fit after  self-cal, rms=0.133623Jy  sigma=0.865961
! Inverting map 
! Added new window around map position (11, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0417139 Jy
! Component: 100  -  total flux cleaned = 0.068189 Jy
! Total flux subtracted in 100 components = 0.068189 Jy
! Clean residual min=-0.011992 max=0.020834 Jy/beam
! Clean residual mean=-0.000048 rms=0.003002 Jy/beam
! Combined flux in latest and established models = 0.270685 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 41 components and 0.270685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.111085Jy  sigma=0.673882
! Fit after  self-cal, rms=0.109268Jy  sigma=0.660665
! Inverting map 
! Added new window around map position (6, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0240341 Jy
! Component: 100  -  total flux cleaned = 0.0406539 Jy
! Total flux subtracted in 100 components = 0.0406539 Jy
! Clean residual min=-0.008516 max=0.010809 Jy/beam
! Clean residual mean=-0.000035 rms=0.002203 Jy/beam
! Combined flux in latest and established models = 0.311339 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 66 components and 0.311339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.099787Jy  sigma=0.575080
! Fit after  self-cal, rms=0.099209Jy  sigma=0.571182
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.415 mas, bmaj=5.765 mas, bpa=16.75 degrees
! Estimated noise=1.09943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (14.5, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.023132 Jy
! Component: 100  -  total flux cleaned = 0.0377838 Jy
! Component: 150  -  total flux cleaned = 0.0484107 Jy
! Component: 200  -  total flux cleaned = 0.0564114 Jy
! Total flux subtracted in 200 components = 0.0564114 Jy
! Clean residual min=-0.006701 max=0.007751 Jy/beam
! Clean residual mean=-0.000035 rms=0.001777 Jy/beam
! Combined flux in latest and established models = 0.367751 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 130 components and 0.367751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.092604Jy  sigma=0.507852
! Fit after  self-cal, rms=0.092027Jy  sigma=0.502921
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.415 x 5.765 at 16.75 degrees (North through East)
! Clean map  min=-0.0051626  max=0.21037 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.03     KP        0.96     
!   LA        0.95     MK        1.01     NL        0.97     OV        0.99     
!   PT        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.04     KP        1.00     
!   LA        0.97     MK        1.00     NL        1.01     OV        1.14     
!   PT        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.03     KP        1.04     
!   LA        1.03     MK        0.99     NL        0.96     OV        1.02     
!   PT        0.94     
! 
! 
! Fit before self-cal, rms=0.092027Jy  sigma=0.502921
! Fit after  self-cal, rms=0.092277Jy  sigma=0.490406
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.442 mas, bmaj=5.806 mas, bpa=17.16 degrees
! Estimated noise=1.08782 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00577347 Jy
! Component: 100  -  total flux cleaned = 0.00837891 Jy
! Component: 150  -  total flux cleaned = 0.00954463 Jy
! Component: 200  -  total flux cleaned = 0.0100638 Jy
! Total flux subtracted in 200 components = 0.0100638 Jy
! Clean residual min=-0.006343 max=0.005939 Jy/beam
! Clean residual mean=0.000002 rms=0.001397 Jy/beam
! Combined flux in latest and established models = 0.377814 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 156 components and 0.377815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091943Jy  sigma=0.485600
! Fit after  self-cal, rms=0.091859Jy  sigma=0.484807
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.091859Jy  sigma=0.484807
! Fit after  self-cal, rms=0.064909Jy  sigma=0.441202
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.441 mas, bmaj=5.813 mas, bpa=17.16 degrees
! Estimated noise=1.08677 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00387653 Jy
! Component: 100  -  total flux cleaned = 0.00547866 Jy
! Component: 150  -  total flux cleaned = 0.00616835 Jy
! Component: 200  -  total flux cleaned = 0.00667783 Jy
! Total flux subtracted in 200 components = 0.00667783 Jy
! Clean residual min=-0.002546 max=0.002833 Jy/beam
! Clean residual mean=-0.000001 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.384492 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 191 components and 0.384492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064629Jy  sigma=0.438824
! Fit after  self-cal, rms=0.064561Jy  sigma=0.438287
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (45, 86).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00270848 Jy
! Component: 100  -  total flux cleaned = 0.00360612 Jy
! Component: 150  -  total flux cleaned = 0.00421643 Jy
! Component: 200  -  total flux cleaned = 0.00448318 Jy
! Total flux subtracted in 200 components = 0.00448318 Jy
! Clean residual min=-0.002318 max=0.002365 Jy/beam
! Clean residual mean=-0.000002 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.388975 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 216 components and 0.388976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064389Jy  sigma=0.437020
! Fit after  self-cal, rms=0.064369Jy  sigma=0.436882
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.064369Jy  sigma=0.436882
! Fit after  self-cal, rms=0.064056Jy  sigma=0.436227
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.443 mas, bmaj=5.814 mas, bpa=17.11 degrees
! Estimated noise=1.08486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232652 Jy
! Component: 100  -  total flux cleaned = 0.00298693 Jy
! Component: 150  -  total flux cleaned = 0.00368938 Jy
! Component: 200  -  total flux cleaned = 0.00423866 Jy
! Total flux subtracted in 200 components = 0.00423866 Jy
! Clean residual min=-0.002221 max=0.002273 Jy/beam
! Clean residual mean=-0.000003 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 0.393214 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 236 components and 0.393214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063928Jy  sigma=0.435326
! Fit after  self-cal, rms=0.063901Jy  sigma=0.435183
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000407714 Jy
! Component: 100  -  total flux cleaned = 0.000686567 Jy
! Component: 150  -  total flux cleaned = 0.000961282 Jy
! Component: 200  -  total flux cleaned = 0.00110366 Jy
! Total flux subtracted in 200 components = 0.00110366 Jy
! Clean residual min=-0.002174 max=0.002246 Jy/beam
! Clean residual mean=-0.000002 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.394318 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 246 components and 0.394318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063842Jy  sigma=0.434764
! Fit after  self-cal, rms=0.063831Jy  sigma=0.434702
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063831Jy  sigma=0.434702
! Fit after  self-cal, rms=0.063670Jy  sigma=0.434483
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.064 mas, bmaj=10.24 mas, bpa=-6.105 degrees
! Estimated noise=1.28046 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00184688 Jy
! Component: 100  -  total flux cleaned = 0.00233435 Jy
! Component: 150  -  total flux cleaned = 0.0025429 Jy
! Component: 200  -  total flux cleaned = 0.00260577 Jy
! Total flux subtracted in 200 components = 0.00260577 Jy
! Clean residual min=-0.002150 max=0.002540 Jy/beam
! Clean residual mean=-0.000005 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.396924 Jy
selfcal
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 266 components and 0.396923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063620Jy  sigma=0.434153
! Fit after  self-cal, rms=0.063605Jy  sigma=0.434060
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.74342e-06 Jy
! Component: 100  -  total flux cleaned = 0.000261845 Jy
! Component: 150  -  total flux cleaned = 0.000349483 Jy
! Component: 200  -  total flux cleaned = 0.000397733 Jy
! Total flux subtracted in 200 components = 0.000397733 Jy
! Clean residual min=-0.002191 max=0.002558 Jy/beam
! Clean residual mean=-0.000004 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.397321 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 274 components and 0.397321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063583Jy  sigma=0.433933
! Fit after  self-cal, rms=0.063579Jy  sigma=0.433886
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.445 mas, bmaj=5.814 mas, bpa=17.12 degrees
! Estimated noise=1.08387 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.445 x 5.814 at 17.12 degrees (North through East)
! Clean map  min=-0.0019576  max=0.20415 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.6 mas, bmaj=4.863 mas, bpa=16.05 degrees
! Estimated noise=1.69209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.158067 Jy
! Component: 100  -  total flux cleaned = 0.213249 Jy
! Component: 150  -  total flux cleaned = 0.251735 Jy
! Component: 200  -  total flux cleaned = 0.279857 Jy
! Total flux subtracted in 200 components = 0.279857 Jy
! Clean residual min=-0.008365 max=0.015989 Jy/beam
! Clean residual mean=-0.000036 rms=0.002176 Jy/beam
! Combined flux in latest and established models = 0.279857 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 63 model components to the UV plane model.
! The established model now contains 63 components and 0.279857 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.445 mas, bmaj=5.814 mas, bpa=17.12 degrees
! Estimated noise=1.08387 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0338686 Jy
! Component: 100  -  total flux cleaned = 0.0555602 Jy
! Component: 150  -  total flux cleaned = 0.0706146 Jy
! Component: 200  -  total flux cleaned = 0.0813878 Jy
! Total flux subtracted in 200 components = 0.0813878 Jy
! Clean residual min=-0.003530 max=0.006106 Jy/beam
! Clean residual mean=-0.000018 rms=0.001073 Jy/beam
! Combined flux in latest and established models = 0.361245 Jy
! Adding 123 model components to the UV plane model.
! The established model now contains 177 components and 0.361245 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00800771 Jy
! Component: 100  -  total flux cleaned = 0.0140802 Jy
! Component: 150  -  total flux cleaned = 0.0187205 Jy
! Component: 200  -  total flux cleaned = 0.0222969 Jy
! Total flux subtracted in 200 components = 0.0222969 Jy
! Clean residual min=-0.002437 max=0.002503 Jy/beam
! Clean residual mean=-0.000005 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.383542 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 237 components and 0.383541 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.064 mas, bmaj=10.24 mas, bpa=-6.105 degrees
! Estimated noise=1.28046 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00421997 Jy
! Component: 100  -  total flux cleaned = 0.00712683 Jy
! Component: 150  -  total flux cleaned = 0.00925692 Jy
! Component: 200  -  total flux cleaned = 0.0108349 Jy
! Total flux subtracted in 200 components = 0.0108349 Jy
! Clean residual min=-0.002298 max=0.002322 Jy/beam
! Clean residual mean=-0.000003 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.394376 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000793024 Jy
! Component: 100  -  total flux cleaned = 0.00132998 Jy
! Component: 150  -  total flux cleaned = 0.00165712 Jy
! Component: 200  -  total flux cleaned = 0.00188351 Jy
! Total flux subtracted in 200 components = 0.00188351 Jy
! Clean residual min=-0.002180 max=0.002416 Jy/beam
! Clean residual mean=-0.000003 rms=0.000615 Jy/beam
! Combined flux in latest and established models = 0.39626 Jy
! Adding 100 model components to the UV plane model.
! The established model now contains 324 components and 0.39626 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.445 mas, bmaj=5.814 mas, bpa=17.12 degrees
! Estimated noise=1.08387 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.40576e-05 Jy
! Component: 100  -  total flux cleaned = 0.000310342 Jy
! Component: 150  -  total flux cleaned = 0.000457625 Jy
! Component: 200  -  total flux cleaned = 0.000557318 Jy
! Total flux subtracted in 200 components = 0.000557318 Jy
! Clean residual min=-0.002191 max=0.002143 Jy/beam
! Clean residual mean=-0.000002 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.396817 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 342 components and 0.396817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.063582Jy  sigma=0.434054
! Fit after  self-cal, rms=0.063543Jy  sigma=0.433755
wmodel J2252+7043_S_map.mod
! Writing 342 model components to file: J2252+7043_S_map.mod
wobs   J2252+7043_S_uvs.fits
! Writing UV FITS file: J2252+7043_S_uvs.fits
wwins  J2252+7043_S_map.win
! wwins: Wrote 5 windows to J2252+7043_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000310561 Jy
! Component: 100  -  total flux cleaned = -0.000596377 Jy
! Component: 150  -  total flux cleaned = -0.0007976 Jy
! Component: 200  -  total flux cleaned = -0.000892957 Jy
! Component: 250  -  total flux cleaned = -0.000799751 Jy
! Component: 300  -  total flux cleaned = -0.000679468 Jy
! Component: 350  -  total flux cleaned = -0.000650702 Jy
! Component: 400  -  total flux cleaned = -0.000651082 Jy
! Component: 450  -  total flux cleaned = -0.000678282 Jy
! Component: 500  -  total flux cleaned = -0.000677857 Jy
! Component: 550  -  total flux cleaned = -0.000677362 Jy
! Component: 600  -  total flux cleaned = -0.000677435 Jy
! Component: 650  -  total flux cleaned = -0.000754637 Jy
! Component: 700  -  total flux cleaned = -0.000805063 Jy
! Component: 750  -  total flux cleaned = -0.000730382 Jy
! Component: 800  -  total flux cleaned = -0.000755195 Jy
! Component: 850  -  total flux cleaned = -0.000707133 Jy
! Component: 900  -  total flux cleaned = -0.000779208 Jy
! Component: 950  -  total flux cleaned = -0.00084914 Jy
! Component: 1000  -  total flux cleaned = -0.000895012 Jy
! Component: 1050  -  total flux cleaned = -0.000985455 Jy
! Component: 1100  -  total flux cleaned = -0.00100809 Jy
! Component: 1150  -  total flux cleaned = -0.0010743 Jy
! Component: 1200  -  total flux cleaned = -0.00107423 Jy
! Component: 1250  -  total flux cleaned = -0.00120336 Jy
! Component: 1300  -  total flux cleaned = -0.0012033 Jy
! Component: 1350  -  total flux cleaned = -0.00128721 Jy
! Component: 1400  -  total flux cleaned = -0.00120457 Jy
! Component: 1450  -  total flux cleaned = -0.00126639 Jy
! Component: 1500  -  total flux cleaned = -0.00140792 Jy
! Component: 1550  -  total flux cleaned = -0.00140811 Jy
! Component: 1600  -  total flux cleaned = -0.00146701 Jy
! Component: 1650  -  total flux cleaned = -0.00146703 Jy
! Component: 1700  -  total flux cleaned = -0.001525 Jy
! Component: 1750  -  total flux cleaned = -0.00154409 Jy
! Component: 1800  -  total flux cleaned = -0.00156309 Jy
! Component: 1850  -  total flux cleaned = -0.00171224 Jy
! Component: 1900  -  total flux cleaned = -0.0016752 Jy
! Component: 1950  -  total flux cleaned = -0.00171166 Jy
! Component: 2000  -  total flux cleaned = -0.00169338 Jy
! Component: 2050  -  total flux cleaned = -0.00169336 Jy
! Component: 2100  -  total flux cleaned = -0.00164052 Jy
! Component: 2150  -  total flux cleaned = -0.00167548 Jy
! Component: 2200  -  total flux cleaned = -0.00165808 Jy
! Component: 2250  -  total flux cleaned = -0.00162359 Jy
! Component: 2300  -  total flux cleaned = -0.00162352 Jy
! Component: 2350  -  total flux cleaned = -0.00158958 Jy
! Component: 2400  -  total flux cleaned = -0.00160655 Jy
! Component: 2450  -  total flux cleaned = -0.00160648 Jy
! Component: 2500  -  total flux cleaned = -0.00155753 Jy
! Component: 2550  -  total flux cleaned = -0.00155749 Jy
! Component: 2600  -  total flux cleaned = -0.00155758 Jy
! Component: 2650  -  total flux cleaned = -0.00160548 Jy
! Component: 2700  -  total flux cleaned = -0.00158949 Jy
! Component: 2750  -  total flux cleaned = -0.00147987 Jy
! Component: 2800  -  total flux cleaned = -0.00146452 Jy
! Component: 2850  -  total flux cleaned = -0.00141848 Jy
! Component: 2900  -  total flux cleaned = -0.00143396 Jy
! Component: 2950  -  total flux cleaned = -0.00141879 Jy
! Component: 3000  -  total flux cleaned = -0.00135876 Jy
! Component: 3050  -  total flux cleaned = -0.00131413 Jy
! Component: 3100  -  total flux cleaned = -0.0012995 Jy
! Component: 3150  -  total flux cleaned = -0.0012701 Jy
! Component: 3200  -  total flux cleaned = -0.00122664 Jy
! Component: 3250  -  total flux cleaned = -0.00126989 Jy
! Component: 3300  -  total flux cleaned = -0.00125563 Jy
! Component: 3350  -  total flux cleaned = -0.00121295 Jy
! Component: 3400  -  total flux cleaned = -0.00114275 Jy
! Component: 3450  -  total flux cleaned = -0.00115673 Jy
! Component: 3500  -  total flux cleaned = -0.00112906 Jy
! Component: 3550  -  total flux cleaned = -0.00112897 Jy
! Component: 3600  -  total flux cleaned = -0.00106049 Jy
! Component: 3650  -  total flux cleaned = -0.00101979 Jy
! Component: 3700  -  total flux cleaned = -0.000979482 Jy
! Component: 3750  -  total flux cleaned = -0.000966133 Jy
! Component: 3800  -  total flux cleaned = -0.000899883 Jy
! Component: 3850  -  total flux cleaned = -0.000873578 Jy
! Component: 3900  -  total flux cleaned = -0.000808099 Jy
! Component: 3950  -  total flux cleaned = -0.000756072 Jy
! Component: 4000  -  total flux cleaned = -0.000756109 Jy
! Component: 4050  -  total flux cleaned = -0.000666162 Jy
! Total flux subtracted in 4096 components = -0.000576847 Jy
! Clean residual min=-0.000651 max=0.000719 Jy/beam
! Clean residual mean=-0.000001 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.39624 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 628 components and 0.396241 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2252+7043_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.445 x 5.814 at 17.12 degrees (North through East)
! Clean map  min=-0.001609  max=0.20301 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2252+7043_S_map.fits
wmodel /image_prod/ug002_uva//J2252+7043_S_map.mod
! Writing 628 model components to file: /image_prod/ug002_uva//J2252+7043_S_map.mod
wobs   /image_prod/ug002_uva//J2252+7043_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2252+7043_S_uvs.fits
wwins  /image_prod/ug002_uva//J2252+7043_S_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J2252+7043_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.203006 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000247626 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.365938 0.365938 0.731876 1.46375 2.92751 5.85501 11.71 23.42 46.8401 93.6802
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.203 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  819.81 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2252+7043_S_dfm.log closed on Thu Mar  5 05:55:11 2020