! Started logfile: /image_prod/ug002_uva//J2250+1419_S_b_dfm.log on Thu Mar 5 05:54:31 2020 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /image_prod/ug002_uva//J2250+1419_S_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2250+1419_S_b_uva.fits ! AN table 1: 120 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.801157 visibilities/baseline/integration-bin. ! Found source: J2250+1419 ! ! There are 3 IFs, and a total of 3 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 40 lines of history. ! ! Reading 10383 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 3 channels. ! Selecting polarization: RR, channels: 1..3 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2250+1419_S_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007593Jy sigma=8.823932 ! Fit after self-cal, rms=0.949570Jy sigma=8.243916 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.973 mas, bmaj=7.975 mas, bpa=9.478 degrees ! Estimated noise=1.68139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418499 Jy ! Component: 100 - total flux cleaned = 0.064181 Jy ! Total flux subtracted in 100 components = 0.064181 Jy ! Clean residual min=-0.014680 max=0.017763 Jy/beam ! Clean residual mean=0.000010 rms=0.005041 Jy/beam ! Combined flux in latest and established models = 0.064181 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.064181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.106136Jy sigma=0.867246 ! Fit after self-cal, rms=0.104780Jy sigma=0.854974 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.859 mas, bmaj=9.148 mas, bpa=3.846 degrees ! Estimated noise=0.829571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227871 Jy ! Component: 100 - total flux cleaned = 0.0365729 Jy ! Component: 150 - total flux cleaned = 0.0455779 Jy ! Component: 200 - total flux cleaned = 0.0515986 Jy ! Total flux subtracted in 200 components = 0.0515986 Jy ! Clean residual min=-0.017611 max=0.026395 Jy/beam ! Clean residual mean=-0.000018 rms=0.005818 Jy/beam ! Combined flux in latest and established models = 0.11578 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 86 components and 0.11578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.100209Jy sigma=0.798911 ! Fit after self-cal, rms=0.099809Jy sigma=0.795872 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.859 x 9.148 at 3.846 degrees (North through East) ! Clean map min=-0.017219 max=0.049711 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.56 FD 0.61 HN 0.81 KP 1.70 ! LA 0.89 NL 1.69 OV 2.35 PT 0.63 ! SC 1.18 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.79 FD 0.61 HN 0.80 KP 1.87 ! LA 0.83 NL 1.47 OV 2.52 PT 0.70 ! SC 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.70 FD 0.67 HN 0.77 KP 1.75 ! LA 0.83 NL 1.57 OV 2.74 PT 0.69 ! SC 1.18 ! ! ! Fit before self-cal, rms=0.099809Jy sigma=0.795872 ! Fit after self-cal, rms=0.234860Jy sigma=0.709730 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.884 mas, bmaj=9.079 mas, bpa=-0.7332 degrees ! Estimated noise=0.880688 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540256 Jy ! Component: 100 - total flux cleaned = 0.00736861 Jy ! Component: 150 - total flux cleaned = 0.00737591 Jy ! Component: 200 - total flux cleaned = 0.00731528 Jy ! Total flux subtracted in 200 components = 0.00731528 Jy ! Clean residual min=-0.013586 max=0.019301 Jy/beam ! Clean residual mean=-0.000045 rms=0.004931 Jy/beam ! Combined flux in latest and established models = 0.123095 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 93 components and 0.123095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.234065Jy sigma=0.710546 ! Fit after self-cal, rms=0.241765Jy sigma=0.694866 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.241765Jy sigma=0.694866 ! Fit after self-cal, rms=0.477847Jy sigma=0.671262 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.562 mas, bmaj=8.778 mas, bpa=-2.214 degrees ! Estimated noise=0.995432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112206 Jy ! Component: 100 - total flux cleaned = 0.0167978 Jy ! Component: 150 - total flux cleaned = 0.0192683 Jy ! Component: 200 - total flux cleaned = 0.0193626 Jy ! Total flux subtracted in 200 components = 0.0193626 Jy ! Clean residual min=-0.014532 max=0.019688 Jy/beam ! Clean residual mean=-0.000073 rms=0.004818 Jy/beam ! Combined flux in latest and established models = 0.142458 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 106 components and 0.142458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.476639Jy sigma=0.665022 ! Fit after self-cal, rms=0.479492Jy sigma=0.662108 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143304 Jy ! Component: 100 - total flux cleaned = -0.00144449 Jy ! Component: 150 - total flux cleaned = -0.0014055 Jy ! Component: 200 - total flux cleaned = -0.0014061 Jy ! Total flux subtracted in 200 components = -0.0014061 Jy ! Clean residual min=-0.013962 max=0.018535 Jy/beam ! Clean residual mean=-0.000071 rms=0.004724 Jy/beam ! Combined flux in latest and established models = 0.141051 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 109 components and 0.141051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.479422Jy sigma=0.661667 ! Fit after self-cal, rms=0.479478Jy sigma=0.661485 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.479478Jy sigma=0.661485 ! Fit after self-cal, rms=0.712634Jy sigma=0.650096 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.396 mas, bmaj=8.983 mas, bpa=-6.916 degrees ! Estimated noise=0.921814 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247439 Jy ! Component: 100 - total flux cleaned = 0.00329845 Jy ! Component: 150 - total flux cleaned = 0.00364902 Jy ! Component: 200 - total flux cleaned = 0.00377724 Jy ! Total flux subtracted in 200 components = 0.00377724 Jy ! Clean residual min=-0.013080 max=0.014050 Jy/beam ! Clean residual mean=-0.000043 rms=0.004107 Jy/beam ! Combined flux in latest and established models = 0.144829 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 112 components and 0.144829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.712502Jy sigma=0.650488 ! Fit after self-cal, rms=0.715064Jy sigma=0.649412 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000973293 Jy ! Component: 100 - total flux cleaned = -0.00097606 Jy ! Component: 150 - total flux cleaned = -0.000937659 Jy ! Component: 200 - total flux cleaned = -0.000937901 Jy ! Total flux subtracted in 200 components = -0.000937901 Jy ! Clean residual min=-0.012947 max=0.014372 Jy/beam ! Clean residual mean=-0.000044 rms=0.004134 Jy/beam ! Combined flux in latest and established models = 0.143891 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 115 components and 0.143891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.714981Jy sigma=0.649412 ! Fit after self-cal, rms=0.715077Jy sigma=0.649262 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.715077Jy sigma=0.649262 ! Fit after self-cal, rms=0.904453Jy sigma=0.648713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.692 mas, bmaj=13.63 mas, bpa=-20.59 degrees ! Estimated noise=1.12254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205179 Jy ! Component: 100 - total flux cleaned = 0.00242547 Jy ! Component: 150 - total flux cleaned = 0.00259207 Jy ! Component: 200 - total flux cleaned = 0.00268175 Jy ! Total flux subtracted in 200 components = 0.00268175 Jy ! Clean residual min=-0.021490 max=0.024437 Jy/beam ! Clean residual mean=-0.000075 rms=0.007137 Jy/beam ! Combined flux in latest and established models = 0.146573 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 118 components and 0.146573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.904323Jy sigma=0.650513 ! Fit after self-cal, rms=0.905788Jy sigma=0.649272 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101742 Jy ! Component: 100 - total flux cleaned = -0.0011469 Jy ! Component: 150 - total flux cleaned = -0.00109908 Jy ! Component: 200 - total flux cleaned = -0.00106132 Jy ! Total flux subtracted in 200 components = -0.00106132 Jy ! Clean residual min=-0.022217 max=0.024598 Jy/beam ! Clean residual mean=-0.000075 rms=0.007175 Jy/beam ! Combined flux in latest and established models = 0.145511 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 0.145511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.905657Jy sigma=0.650799 ! Fit after self-cal, rms=0.905970Jy sigma=0.649892 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.308 mas, bmaj=9.254 mas, bpa=-9.583 degrees ! Estimated noise=0.877243 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.308 x 9.254 at -9.583 degrees (North through East) ! Clean map min=-0.012159 max=0.056379 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=7.865 mas, bpa=-3.363 degrees ! Estimated noise=1.65542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432285 Jy ! Component: 100 - total flux cleaned = 0.070376 Jy ! Component: 150 - total flux cleaned = 0.0891438 Jy ! Component: 200 - total flux cleaned = 0.102639 Jy ! Total flux subtracted in 200 components = 0.102639 Jy ! Clean residual min=-0.010759 max=0.010430 Jy/beam ! Clean residual mean=-0.000010 rms=0.003039 Jy/beam ! Combined flux in latest and established models = 0.102639 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.102639 Jy ! Inverting map and beam ! Estimated beam: bmin=4.308 mas, bmaj=9.254 mas, bpa=-9.583 degrees ! Estimated noise=0.877243 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149712 Jy ! Component: 100 - total flux cleaned = 0.0241924 Jy ! Component: 150 - total flux cleaned = 0.0302227 Jy ! Component: 200 - total flux cleaned = 0.0342317 Jy ! Total flux subtracted in 200 components = 0.0342317 Jy ! Clean residual min=-0.012921 max=0.013873 Jy/beam ! Clean residual mean=-0.000036 rms=0.003980 Jy/beam ! Combined flux in latest and established models = 0.13687 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 68 components and 0.13687 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.692 mas, bmaj=13.63 mas, bpa=-20.59 degrees ! Estimated noise=1.12254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00479111 Jy ! Component: 100 - total flux cleaned = 0.00657729 Jy ! Component: 150 - total flux cleaned = 0.0067507 Jy ! Component: 200 - total flux cleaned = 0.00684944 Jy ! Total flux subtracted in 200 components = 0.00684944 Jy ! Clean residual min=-0.022402 max=0.024839 Jy/beam ! Clean residual mean=-0.000074 rms=0.007194 Jy/beam ! Combined flux in latest and established models = 0.14372 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137441 Jy ! Component: 100 - total flux cleaned = 0.000256737 Jy ! Component: 150 - total flux cleaned = 0.000360696 Jy ! Component: 200 - total flux cleaned = 0.000393699 Jy ! Total flux subtracted in 200 components = 0.000393699 Jy ! Clean residual min=-0.022419 max=0.024808 Jy/beam ! Clean residual mean=-0.000074 rms=0.007192 Jy/beam ! Combined flux in latest and established models = 0.144114 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 84 components and 0.144114 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.308 mas, bmaj=9.254 mas, bpa=-9.583 degrees ! Estimated noise=0.877243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79234e-05 Jy ! Component: 100 - total flux cleaned = -0.000153617 Jy ! Component: 150 - total flux cleaned = -0.000354475 Jy ! Component: 200 - total flux cleaned = -0.000476046 Jy ! Total flux subtracted in 200 components = -0.000476046 Jy ! Clean residual min=-0.012484 max=0.013723 Jy/beam ! Clean residual mean=-0.000041 rms=0.003953 Jy/beam ! Combined flux in latest and established models = 0.143637 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 0.143637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Fit before self-cal, rms=0.905909Jy sigma=0.650437 ! Fit after self-cal, rms=0.905891Jy sigma=0.649789 wmodel J2250+1419_S_b_map.mod ! Writing 100 model components to file: J2250+1419_S_b_map.mod wobs J2250+1419_S_b_uvs.fits ! Writing UV FITS file: J2250+1419_S_b_uvs.fits wwins J2250+1419_S_b_map.win ! wwins: Wrote 1 windows to J2250+1419_S_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433251 Jy ! Component: 100 - total flux cleaned = 0.00758345 Jy ! Component: 150 - total flux cleaned = 0.00913371 Jy ! Component: 200 - total flux cleaned = 0.0106301 Jy ! Component: 250 - total flux cleaned = 0.0120809 Jy ! Component: 300 - total flux cleaned = 0.0136907 Jy ! Component: 350 - total flux cleaned = 0.0148746 Jy ! Component: 400 - total flux cleaned = 0.0162282 Jy ! Component: 450 - total flux cleaned = 0.0177418 Jy ! Component: 500 - total flux cleaned = 0.0190384 Jy ! Component: 550 - total flux cleaned = 0.0203108 Jy ! Component: 600 - total flux cleaned = 0.021738 Jy ! Component: 650 - total flux cleaned = 0.0229622 Jy ! Component: 700 - total flux cleaned = 0.0239965 Jy ! Component: 750 - total flux cleaned = 0.0251837 Jy ! Component: 800 - total flux cleaned = 0.0261852 Jy ! Component: 850 - total flux cleaned = 0.0270083 Jy ! Component: 900 - total flux cleaned = 0.0281461 Jy ! Component: 950 - total flux cleaned = 0.029269 Jy ! Component: 1000 - total flux cleaned = 0.0305346 Jy ! Component: 1050 - total flux cleaned = 0.0311593 Jy ! Component: 1100 - total flux cleaned = 0.0317794 Jy ! Component: 1150 - total flux cleaned = 0.0330029 Jy ! Component: 1200 - total flux cleaned = 0.0340586 Jy ! Component: 1250 - total flux cleaned = 0.0351029 Jy ! Component: 1300 - total flux cleaned = 0.0358423 Jy ! Component: 1350 - total flux cleaned = 0.036867 Jy ! Component: 1400 - total flux cleaned = 0.0378794 Jy ! Component: 1450 - total flux cleaned = 0.0388825 Jy ! Component: 1500 - total flux cleaned = 0.0394512 Jy ! Component: 1550 - total flux cleaned = 0.0401546 Jy ! Component: 1600 - total flux cleaned = 0.0407109 Jy ! Component: 1650 - total flux cleaned = 0.0411263 Jy ! Component: 1700 - total flux cleaned = 0.0416746 Jy ! Component: 1750 - total flux cleaned = 0.0422188 Jy ! Component: 1800 - total flux cleaned = 0.0428934 Jy ! Component: 1850 - total flux cleaned = 0.0434302 Jy ! Component: 1900 - total flux cleaned = 0.0440962 Jy ! Component: 1950 - total flux cleaned = 0.0448875 Jy ! Component: 2000 - total flux cleaned = 0.0455424 Jy ! Component: 2050 - total flux cleaned = 0.0458029 Jy ! Component: 2100 - total flux cleaned = 0.046449 Jy ! Component: 2150 - total flux cleaned = 0.0464484 Jy ! Component: 2200 - total flux cleaned = 0.0463196 Jy ! Component: 2250 - total flux cleaned = 0.0465747 Jy ! Component: 2300 - total flux cleaned = 0.0465746 Jy ! Component: 2350 - total flux cleaned = 0.0464496 Jy ! Component: 2400 - total flux cleaned = 0.0466989 Jy ! Component: 2450 - total flux cleaned = 0.0466985 Jy ! Component: 2500 - total flux cleaned = 0.0466984 Jy ! Component: 2550 - total flux cleaned = 0.0465755 Jy ! Component: 2600 - total flux cleaned = 0.0465753 Jy ! Component: 2650 - total flux cleaned = 0.0465753 Jy ! Component: 2700 - total flux cleaned = 0.0462135 Jy ! Component: 2750 - total flux cleaned = 0.046455 Jy ! Component: 2800 - total flux cleaned = 0.046335 Jy ! Component: 2850 - total flux cleaned = 0.0458584 Jy ! Component: 2900 - total flux cleaned = 0.0457392 Jy ! Component: 2950 - total flux cleaned = 0.0453844 Jy ! Component: 3000 - total flux cleaned = 0.0451484 Jy ! Component: 3050 - total flux cleaned = 0.0452654 Jy ! Component: 3100 - total flux cleaned = 0.0447975 Jy ! Component: 3150 - total flux cleaned = 0.044449 Jy ! Component: 3200 - total flux cleaned = 0.0442168 Jy ! Component: 3250 - total flux cleaned = 0.0436385 Jy ! Component: 3300 - total flux cleaned = 0.0431775 Jy ! Component: 3350 - total flux cleaned = 0.0428328 Jy ! Component: 3400 - total flux cleaned = 0.0421448 Jy ! Component: 3450 - total flux cleaned = 0.0414576 Jy ! Component: 3500 - total flux cleaned = 0.0408855 Jy ! Component: 3550 - total flux cleaned = 0.0404287 Jy ! Component: 3600 - total flux cleaned = 0.0402007 Jy ! Component: 3650 - total flux cleaned = 0.039744 Jy ! Component: 3700 - total flux cleaned = 0.0394016 Jy ! Component: 3750 - total flux cleaned = 0.0387154 Jy ! Component: 3800 - total flux cleaned = 0.0384855 Jy ! Component: 3850 - total flux cleaned = 0.0381422 Jy ! Component: 3900 - total flux cleaned = 0.037683 Jy ! Component: 3950 - total flux cleaned = 0.0365328 Jy ! Component: 4000 - total flux cleaned = 0.0360717 Jy ! Component: 4050 - total flux cleaned = 0.035378 Jy ! Total flux subtracted in 4096 components = 0.0351454 Jy ! Clean residual min=-0.007132 max=0.006082 Jy/beam ! Clean residual mean=-0.000010 rms=0.002671 Jy/beam ! Combined flux in latest and established models = 0.178783 Jy keep ! Adding 616 model components to the UV plane model. ! The established model now contains 716 components and 0.178783 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2250+1419_S_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.308 x 9.254 at -9.583 degrees (North through East) ! Clean map min=-0.01641 max=0.054317 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2250+1419_S_b_map.fits wmodel /image_prod/ug002_uva//J2250+1419_S_b_map.mod ! Writing 716 model components to file: /image_prod/ug002_uva//J2250+1419_S_b_map.mod wobs /image_prod/ug002_uva//J2250+1419_S_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2250+1419_S_b_uvs.fits wwins /image_prod/ug002_uva//J2250+1419_S_b_map.win ! wwins: Wrote 2 windows to /image_prod/ug002_uva//J2250+1419_S_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0543173 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00255396 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -14.1058 14.1058 28.2116 56.4232 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0076 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.054 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 21.267 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2250+1419_S_b_dfm.log closed on Thu Mar 5 05:54:35 2020