! Started logfile: /image_prod/ug002_uva//J2242+8224_S_dfm.log on Thu Mar  5 05:51:16 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2242+8224_S_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2242+8224_S_uva.fits
! AN table 1: 75 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.564074 visibilities/baseline/integration-bin.
! Found source: J2242+8224
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 4569 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2242+8224_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 175 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 175 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 175 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016943Jy  sigma=7.524765
! Fit after  self-cal, rms=0.876717Jy  sigma=6.401097
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.6 mas, bmaj=6.676 mas, bpa=0.1469 degrees
! Estimated noise=2.40134 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0946589 Jy
! Component: 100  -  total flux cleaned = 0.138242 Jy
! Total flux subtracted in 100 components = 0.138242 Jy
! Clean residual min=-0.018311 max=0.035459 Jy/beam
! Clean residual mean=0.000064 rms=0.006241 Jy/beam
! Combined flux in latest and established models = 0.138242 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.138242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.132996Jy  sigma=0.903492
! Fit after  self-cal, rms=0.132069Jy  sigma=0.898568
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.252 mas, bmaj=8.085 mas, bpa=0.04336 degrees
! Estimated noise=1.46214 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0484887 Jy
! Component: 100  -  total flux cleaned = 0.0778962 Jy
! Component: 150  -  total flux cleaned = 0.0973481 Jy
! Component: 200  -  total flux cleaned = 0.104058 Jy
! Total flux subtracted in 200 components = 0.104058 Jy
! Clean residual min=-0.015228 max=0.031336 Jy/beam
! Clean residual mean=0.000001 rms=0.004885 Jy/beam
! Combined flux in latest and established models = 0.242299 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 65 components and 0.242299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112730Jy  sigma=0.717439
! Fit after  self-cal, rms=0.110430Jy  sigma=0.699252
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.252 x 8.085 at 0.04336 degrees (North through East)
! Clean map  min=-0.01592  max=0.12339 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        0.97     KP        0.94     LA        0.88     
!   MK        1.16     NL        1.51     OV        1.14     PT        0.94     
!   SC        1.20     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.48     FD        1.00     KP        0.97     LA        0.92     
!   MK        0.92     NL        1.25     OV        1.00     PT        0.99     
!   SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.69     FD        0.98     KP        0.97     LA        0.92     
!   MK        0.96     NL        1.44     OV        1.10     PT        0.93     
!   SC        1.14     
! 
! 
! Fit before self-cal, rms=0.110430Jy  sigma=0.699252
! Fit after  self-cal, rms=0.105895Jy  sigma=0.617681
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.335 mas, bmaj=8.348 mas, bpa=0.3415 degrees
! Estimated noise=1.45449 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.5, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136778 Jy
! Component: 100  -  total flux cleaned = 0.0162546 Jy
! Component: 150  -  total flux cleaned = 0.016844 Jy
! Component: 200  -  total flux cleaned = 0.0163764 Jy
! Total flux subtracted in 200 components = 0.0163764 Jy
! Clean residual min=-0.006743 max=0.008507 Jy/beam
! Clean residual mean=-0.000008 rms=0.002127 Jy/beam
! Combined flux in latest and established models = 0.258676 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 99 components and 0.258676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103358Jy  sigma=0.592091
! Fit after  self-cal, rms=0.103750Jy  sigma=0.588804
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.103750Jy  sigma=0.588804
! Fit after  self-cal, rms=0.091374Jy  sigma=0.578600
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.233 mas, bmaj=8.251 mas, bpa=-0.2008 degrees
! Estimated noise=1.39991 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00681955 Jy
! Component: 100  -  total flux cleaned = 0.00880461 Jy
! Component: 150  -  total flux cleaned = 0.00908441 Jy
! Component: 200  -  total flux cleaned = 0.00920587 Jy
! Total flux subtracted in 200 components = 0.00920587 Jy
! Clean residual min=-0.005099 max=0.005627 Jy/beam
! Clean residual mean=-0.000001 rms=0.001433 Jy/beam
! Combined flux in latest and established models = 0.267882 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 128 components and 0.267882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090709Jy  sigma=0.572252
! Fit after  self-cal, rms=0.090412Jy  sigma=0.571781
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123267 Jy
! Component: 100  -  total flux cleaned = 0.000344126 Jy
! Component: 150  -  total flux cleaned = 0.000344169 Jy
! Component: 200  -  total flux cleaned = 0.000254639 Jy
! Total flux subtracted in 200 components = 0.000254639 Jy
! Clean residual min=-0.004998 max=0.005388 Jy/beam
! Clean residual mean=-0.000001 rms=0.001364 Jy/beam
! Combined flux in latest and established models = 0.268136 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 139 components and 0.268136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090164Jy  sigma=0.569911
! Fit after  self-cal, rms=0.090134Jy  sigma=0.569841
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.090134Jy  sigma=0.569841
! Fit after  self-cal, rms=0.086717Jy  sigma=0.568138
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.221 mas, bmaj=8.231 mas, bpa=0.493 degrees
! Estimated noise=1.37885 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00345342 Jy
! Component: 100  -  total flux cleaned = 0.00448681 Jy
! Component: 150  -  total flux cleaned = 0.00457303 Jy
! Component: 200  -  total flux cleaned = 0.00457232 Jy
! Total flux subtracted in 200 components = 0.00457232 Jy
! Clean residual min=-0.004523 max=0.004509 Jy/beam
! Clean residual mean=-0.000001 rms=0.001165 Jy/beam
! Combined flux in latest and established models = 0.272709 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 161 components and 0.272708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086485Jy  sigma=0.565922
! Fit after  self-cal, rms=0.086365Jy  sigma=0.565789
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.20019e-05 Jy
! Component: 100  -  total flux cleaned = -1.24944e-05 Jy
! Component: 150  -  total flux cleaned = -0.000148012 Jy
! Component: 200  -  total flux cleaned = -0.000276539 Jy
! Total flux subtracted in 200 components = -0.000276539 Jy
! Clean residual min=-0.004319 max=0.004364 Jy/beam
! Clean residual mean=-0.000001 rms=0.001126 Jy/beam
! Combined flux in latest and established models = 0.272432 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 169 components and 0.272432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086251Jy  sigma=0.564917
! Fit after  self-cal, rms=0.086235Jy  sigma=0.564884
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.086235Jy  sigma=0.564884
! Fit after  self-cal, rms=0.085181Jy  sigma=0.564395
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.323 mas, bmaj=13.58 mas, bpa=6.267 degrees
! Estimated noise=1.63631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218345 Jy
! Component: 100  -  total flux cleaned = 0.00210965 Jy
! Component: 150  -  total flux cleaned = 0.00196485 Jy
! Component: 200  -  total flux cleaned = 0.00189802 Jy
! Total flux subtracted in 200 components = 0.00189802 Jy
! Clean residual min=-0.004812 max=0.005272 Jy/beam
! Clean residual mean=-0.000001 rms=0.001446 Jy/beam
! Combined flux in latest and established models = 0.27433 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 204 components and 0.27433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085093Jy  sigma=0.563542
! Fit after  self-cal, rms=0.085032Jy  sigma=0.563473
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.57344e-05 Jy
! Component: 100  -  total flux cleaned = 5.27257e-06 Jy
! Component: 150  -  total flux cleaned = 5.59239e-06 Jy
! Component: 200  -  total flux cleaned = 4.86153e-06 Jy
! Total flux subtracted in 200 components = 4.86153e-06 Jy
! Clean residual min=-0.004680 max=0.005110 Jy/beam
! Clean residual mean=-0.000001 rms=0.001403 Jy/beam
! Combined flux in latest and established models = 0.274335 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 219 components and 0.274335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.084992Jy  sigma=0.563133
! Fit after  self-cal, rms=0.085003Jy  sigma=0.563105
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.224 mas, bmaj=8.227 mas, bpa=0.7308 degrees
! Estimated noise=1.37085 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.224 x 8.227 at 0.7308 degrees (North through East)
! Clean map  min=-0.0073625  max=0.11665 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.548 mas, bmaj=6.747 mas, bpa=0.8022 degrees
! Estimated noise=2.27102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0898458 Jy
! Component: 100  -  total flux cleaned = 0.136515 Jy
! Component: 150  -  total flux cleaned = 0.168235 Jy
! Component: 200  -  total flux cleaned = 0.191705 Jy
! Total flux subtracted in 200 components = 0.191705 Jy
! Clean residual min=-0.010685 max=0.015926 Jy/beam
! Clean residual mean=0.000036 rms=0.003307 Jy/beam
! Combined flux in latest and established models = 0.191705 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 46 model components to the UV plane model.
! The established model now contains 46 components and 0.191705 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.224 mas, bmaj=8.227 mas, bpa=0.7308 degrees
! Estimated noise=1.37085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.5, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0258351 Jy
! Component: 100  -  total flux cleaned = 0.0438283 Jy
! Component: 150  -  total flux cleaned = 0.056654 Jy
! Component: 200  -  total flux cleaned = 0.0659713 Jy
! Total flux subtracted in 200 components = 0.0659713 Jy
! Clean residual min=-0.006180 max=0.005673 Jy/beam
! Clean residual mean=0.000009 rms=0.001751 Jy/beam
! Combined flux in latest and established models = 0.257676 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 91 components and 0.257676 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.323 mas, bmaj=13.58 mas, bpa=6.267 degrees
! Estimated noise=1.63631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00870696 Jy
! Component: 100  -  total flux cleaned = 0.0113848 Jy
! Component: 150  -  total flux cleaned = 0.0137748 Jy
! Component: 200  -  total flux cleaned = 0.0155861 Jy
! Total flux subtracted in 200 components = 0.0155861 Jy
! Clean residual min=-0.006094 max=0.006377 Jy/beam
! Clean residual mean=0.000006 rms=0.001745 Jy/beam
! Combined flux in latest and established models = 0.273262 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00053808 Jy
! Component: 100  -  total flux cleaned = 0.000993907 Jy
! Component: 150  -  total flux cleaned = 0.00128872 Jy
! Component: 200  -  total flux cleaned = 0.00138044 Jy
! Total flux subtracted in 200 components = 0.00138044 Jy
! Clean residual min=-0.005629 max=0.005856 Jy/beam
! Clean residual mean=0.000005 rms=0.001582 Jy/beam
! Combined flux in latest and established models = 0.274643 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 136 components and 0.274643 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.224 mas, bmaj=8.227 mas, bpa=0.7308 degrees
! Estimated noise=1.37085 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0005027 Jy
! Component: 100  -  total flux cleaned = -0.000493299 Jy
! Component: 150  -  total flux cleaned = -0.000491095 Jy
! Component: 200  -  total flux cleaned = -0.00039138 Jy
! Total flux subtracted in 200 components = -0.00039138 Jy
! Clean residual min=-0.004288 max=0.004178 Jy/beam
! Clean residual mean=0.000002 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 0.274252 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 160 components and 0.274252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.085317Jy  sigma=0.565429
! Fit after  self-cal, rms=0.085229Jy  sigma=0.564938
wmodel J2242+8224_S_map.mod
! Writing 160 model components to file: J2242+8224_S_map.mod
wobs   J2242+8224_S_uvs.fits
! Writing UV FITS file: J2242+8224_S_uvs.fits
wwins  J2242+8224_S_map.win
! wwins: Wrote 4 windows to J2242+8224_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000500623 Jy
! Component: 100  -  total flux cleaned = -0.000148442 Jy
! Component: 150  -  total flux cleaned = -0.000277584 Jy
! Component: 200  -  total flux cleaned = -0.000587833 Jy
! Component: 250  -  total flux cleaned = -0.00076444 Jy
! Component: 300  -  total flux cleaned = -0.000932246 Jy
! Component: 350  -  total flux cleaned = -0.000876959 Jy
! Component: 400  -  total flux cleaned = -0.00098221 Jy
! Component: 450  -  total flux cleaned = -0.000981834 Jy
! Component: 500  -  total flux cleaned = -0.00103042 Jy
! Component: 550  -  total flux cleaned = -0.00103036 Jy
! Component: 600  -  total flux cleaned = -0.00107634 Jy
! Component: 650  -  total flux cleaned = -0.00120974 Jy
! Component: 700  -  total flux cleaned = -0.00133941 Jy
! Component: 750  -  total flux cleaned = -0.00142335 Jy
! Component: 800  -  total flux cleaned = -0.00150571 Jy
! Component: 850  -  total flux cleaned = -0.00166502 Jy
! Component: 900  -  total flux cleaned = -0.0017428 Jy
! Component: 950  -  total flux cleaned = -0.00193201 Jy
! Component: 1000  -  total flux cleaned = -0.00204204 Jy
! Component: 1050  -  total flux cleaned = -0.002151 Jy
! Component: 1100  -  total flux cleaned = -0.00222236 Jy
! Component: 1150  -  total flux cleaned = -0.00246636 Jy
! Component: 1200  -  total flux cleaned = -0.00260379 Jy
! Component: 1250  -  total flux cleaned = -0.00283797 Jy
! Component: 1300  -  total flux cleaned = -0.00303417 Jy
! Component: 1350  -  total flux cleaned = -0.00316207 Jy
! Component: 1400  -  total flux cleaned = -0.00335094 Jy
! Component: 1450  -  total flux cleaned = -0.00341292 Jy
! Component: 1500  -  total flux cleaned = -0.00353336 Jy
! Component: 1550  -  total flux cleaned = -0.00380055 Jy
! Component: 1600  -  total flux cleaned = -0.00394648 Jy
! Component: 1650  -  total flux cleaned = -0.00417537 Jy
! Component: 1700  -  total flux cleaned = -0.00431588 Jy
! Component: 1750  -  total flux cleaned = -0.00459289 Jy
! Component: 1800  -  total flux cleaned = -0.00472918 Jy
! Component: 1850  -  total flux cleaned = -0.00486345 Jy
! Component: 1900  -  total flux cleaned = -0.00494266 Jy
! Component: 1950  -  total flux cleaned = -0.00504736 Jy
! Component: 2000  -  total flux cleaned = -0.00502219 Jy
! Component: 2050  -  total flux cleaned = -0.0051498 Jy
! Component: 2100  -  total flux cleaned = -0.00527569 Jy
! Component: 2150  -  total flux cleaned = -0.00537457 Jy
! Component: 2200  -  total flux cleaned = -0.00554646 Jy
! Component: 2250  -  total flux cleaned = -0.00566703 Jy
! Component: 2300  -  total flux cleaned = -0.00576258 Jy
! Component: 2350  -  total flux cleaned = -0.00580936 Jy
! Component: 2400  -  total flux cleaned = -0.0059028 Jy
! Component: 2450  -  total flux cleaned = -0.00604123 Jy
! Component: 2500  -  total flux cleaned = -0.00606403 Jy
! Component: 2550  -  total flux cleaned = -0.00624436 Jy
! Component: 2600  -  total flux cleaned = -0.00631106 Jy
! Component: 2650  -  total flux cleaned = -0.00639916 Jy
! Component: 2700  -  total flux cleaned = -0.00650821 Jy
! Component: 2750  -  total flux cleaned = -0.00661597 Jy
! Component: 2800  -  total flux cleaned = -0.00670135 Jy
! Component: 2850  -  total flux cleaned = -0.00678624 Jy
! Component: 2900  -  total flux cleaned = -0.0069328 Jy
! Component: 2950  -  total flux cleaned = -0.00699484 Jy
! Component: 3000  -  total flux cleaned = -0.00703568 Jy
! Component: 3050  -  total flux cleaned = -0.00715754 Jy
! Component: 3100  -  total flux cleaned = -0.00709702 Jy
! Component: 3150  -  total flux cleaned = -0.00717709 Jy
! Component: 3200  -  total flux cleaned = -0.00725665 Jy
! Component: 3250  -  total flux cleaned = -0.00729606 Jy
! Component: 3300  -  total flux cleaned = -0.00731548 Jy
! Component: 3350  -  total flux cleaned = -0.00733444 Jy
! Component: 3400  -  total flux cleaned = -0.00735349 Jy
! Component: 3450  -  total flux cleaned = -0.00733439 Jy
! Component: 3500  -  total flux cleaned = -0.00737196 Jy
! Component: 3550  -  total flux cleaned = -0.0073906 Jy
! Component: 3600  -  total flux cleaned = -0.00742754 Jy
! Component: 3650  -  total flux cleaned = -0.00740887 Jy
! Component: 3700  -  total flux cleaned = -0.00740885 Jy
! Component: 3750  -  total flux cleaned = -0.00739079 Jy
! Component: 3800  -  total flux cleaned = -0.00744503 Jy
! Component: 3850  -  total flux cleaned = -0.00744509 Jy
! Component: 3900  -  total flux cleaned = -0.0074808 Jy
! Component: 3950  -  total flux cleaned = -0.00749849 Jy
! Component: 4000  -  total flux cleaned = -0.00755116 Jy
! Component: 4050  -  total flux cleaned = -0.00755125 Jy
! Total flux subtracted in 4096 components = -0.00758607 Jy
! Clean residual min=-0.001012 max=0.001053 Jy/beam
! Clean residual mean=0.000004 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.266666 Jy
keep
! Adding 281 model components to the UV plane model.
! The established model now contains 441 components and 0.266666 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2242+8224_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.224 x 8.227 at 0.7308 degrees (North through East)
! Clean map  min=-0.0074995  max=0.11652 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2242+8224_S_map.fits
wmodel /image_prod/ug002_uva//J2242+8224_S_map.mod
! Writing 441 model components to file: /image_prod/ug002_uva//J2242+8224_S_map.mod
wobs   /image_prod/ug002_uva//J2242+8224_S_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2242+8224_S_uvs.fits
wwins  /image_prod/ug002_uva//J2242+8224_S_map.win
! wwins: Wrote 5 windows to /image_prod/ug002_uva//J2242+8224_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.116517 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000296645 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.763783 0.763783 1.52757 3.05513 6.11027 12.2205 24.4411 48.8821 97.7643
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.116 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  392.781 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2242+8224_S_dfm.log closed on Thu Mar  5 05:51:20 2020