! Started logfile: /image_prod/ug002_uva//J2231+5922_X_b_dfm.log on Thu Mar 5 05:47:33 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2231+5922_X_b_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2231+5922_X_b_uva.fits ! AN table 1: 80 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.896875 visibilities/baseline/integration-bin. ! Found source: J2231+5922 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 30996 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2231+5922_X_b] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.225453Jy sigma=8.623686 ! Fit after self-cal, rms=0.361099Jy sigma=2.622350 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8895 mas, bmaj=1.541 mas, bpa=-10.94 degrees ! Estimated noise=1.28814 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.478007 Jy ! Component: 100 - total flux cleaned = 0.618968 Jy ! Total flux subtracted in 100 components = 0.618968 Jy ! Clean residual min=-0.019249 max=0.058211 Jy/beam ! Clean residual mean=-0.000002 rms=0.004777 Jy/beam ! Combined flux in latest and established models = 0.618968 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.618968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120150Jy sigma=0.820879 ! Fit after self-cal, rms=0.120122Jy sigma=0.820745 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0586982 Jy ! Component: 100 - total flux cleaned = 0.0909887 Jy ! Total flux subtracted in 100 components = 0.0909887 Jy ! Clean residual min=-0.008924 max=0.017644 Jy/beam ! Clean residual mean=-0.000000 rms=0.002328 Jy/beam ! Combined flux in latest and established models = 0.709957 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.709957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.073549Jy sigma=0.498771 ! Fit after self-cal, rms=0.073531Jy sigma=0.498707 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221988 Jy ! Component: 100 - total flux cleaned = 0.0376163 Jy ! Total flux subtracted in 100 components = 0.0376163 Jy ! Clean residual min=-0.006076 max=0.010802 Jy/beam ! Clean residual mean=0.000000 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 0.747573 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.747573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063303Jy sigma=0.429894 ! Fit after self-cal, rms=0.063293Jy sigma=0.429857 ! Inverting map ! Added new window around map position (2.8, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011466 Jy ! Component: 100 - total flux cleaned = 0.0193957 Jy ! Total flux subtracted in 100 components = 0.0193957 Jy ! Clean residual min=-0.005864 max=0.008059 Jy/beam ! Clean residual mean=0.000000 rms=0.001381 Jy/beam ! Combined flux in latest and established models = 0.766969 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.766969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060666Jy sigma=0.413556 ! Fit after self-cal, rms=0.060615Jy sigma=0.413210 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.077 mas, bmaj=1.805 mas, bpa=-13.02 degrees ! Estimated noise=0.631197 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00727094 Jy ! Component: 100 - total flux cleaned = 0.00947945 Jy ! Component: 150 - total flux cleaned = 0.010129 Jy ! Component: 200 - total flux cleaned = 0.0108745 Jy ! Total flux subtracted in 200 components = 0.0108745 Jy ! Clean residual min=-0.006241 max=0.005410 Jy/beam ! Clean residual mean=-0.000000 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.777844 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 0.777844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059505Jy sigma=0.406940 ! Fit after self-cal, rms=0.059493Jy sigma=0.406852 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.077 x 1.805 at -13.02 degrees (North through East) ! Clean map min=-0.0060198 max=0.64687 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00 KP 1.00 ! LA 1.00* NL 1.00 OV 1.01 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00 KP 1.01 ! LA 1.00* NL 1.00 OV 1.01 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.00 ! LA 1.00* NL 1.00 OV 1.01 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00 KP 1.00 ! LA 1.00* NL 1.00 OV 1.01 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.01 ! LA 1.00* NL 1.00 OV 1.01 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.00 KP 1.00 ! LA 1.00* NL 1.00 OV 1.01 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.00 ! LA 1.00* NL 1.01 OV 1.01 PT 0.98 ! SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.01 ! LA 1.00* NL 1.01 OV 1.01 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.01 KP 1.00 ! LA 1.00* NL 1.01 OV 1.01 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 1.01 ! LA 1.00* NL 1.01 OV 1.01 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.01 KP 1.00 ! LA 1.00* NL 1.01 OV 1.01 PT 0.98 ! SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.00 KP 1.01 ! LA 1.00* NL 1.01 OV 1.01 PT 0.98 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.059493Jy sigma=0.406852 ! Fit after self-cal, rms=0.058048Jy sigma=0.401708 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.074 mas, bmaj=1.804 mas, bpa=-12.79 degrees ! Estimated noise=0.629038 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000991412 Jy ! Component: 100 - total flux cleaned = -0.000711927 Jy ! Component: 150 - total flux cleaned = -0.000560678 Jy ! Component: 200 - total flux cleaned = -0.000428029 Jy ! Total flux subtracted in 200 components = -0.000428029 Jy ! Clean residual min=-0.004133 max=0.003817 Jy/beam ! Clean residual mean=0.000000 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.777416 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.777416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057803Jy sigma=0.399975 ! Fit after self-cal, rms=0.057788Jy sigma=0.399881 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057788Jy sigma=0.399881 ! Fit after self-cal, rms=0.056911Jy sigma=0.391605 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.076 mas, bmaj=1.808 mas, bpa=-13.38 degrees ! Estimated noise=0.630419 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357826 Jy ! Component: 100 - total flux cleaned = 0.00395525 Jy ! Component: 150 - total flux cleaned = 0.00375189 Jy ! Component: 200 - total flux cleaned = 0.00370874 Jy ! Total flux subtracted in 200 components = 0.00370874 Jy ! Clean residual min=-0.002810 max=0.002790 Jy/beam ! Clean residual mean=0.000000 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.781124 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 0.781124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056708Jy sigma=0.389821 ! Fit after self-cal, rms=0.056705Jy sigma=0.389808 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289246 Jy ! Component: 100 - total flux cleaned = -0.000318905 Jy ! Component: 150 - total flux cleaned = -0.000373743 Jy ! Component: 200 - total flux cleaned = -0.000446541 Jy ! Total flux subtracted in 200 components = -0.000446541 Jy ! Clean residual min=-0.002740 max=0.002779 Jy/beam ! Clean residual mean=0.000000 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.780678 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.780678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056683Jy sigma=0.389567 ! Fit after self-cal, rms=0.056682Jy sigma=0.389562 ! Inverting map ! Added new window around map position (-7, 37.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233603 Jy ! Component: 100 - total flux cleaned = 0.00261647 Jy ! Component: 150 - total flux cleaned = 0.00268453 Jy ! Component: 200 - total flux cleaned = 0.00268429 Jy ! Total flux subtracted in 200 components = 0.00268429 Jy ! Clean residual min=-0.002619 max=0.002442 Jy/beam ! Clean residual mean=0.000000 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.783362 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 80 components and 0.783362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056577Jy sigma=0.388885 ! Fit after self-cal, rms=0.056571Jy sigma=0.388834 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056571Jy sigma=0.388834 ! Fit after self-cal, rms=0.056525Jy sigma=0.387790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.076 mas, bmaj=1.81 mas, bpa=-13.64 degrees ! Estimated noise=0.630993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131701 Jy ! Component: 100 - total flux cleaned = 0.00172617 Jy ! Component: 150 - total flux cleaned = 0.00183731 Jy ! Component: 200 - total flux cleaned = 0.00193634 Jy ! Total flux subtracted in 200 components = 0.00193634 Jy ! Clean residual min=-0.002313 max=0.002156 Jy/beam ! Clean residual mean=0.000001 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.785298 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 85 components and 0.785298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056467Jy sigma=0.387165 ! Fit after self-cal, rms=0.056465Jy sigma=0.387155 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.45759e-05 Jy ! Component: 100 - total flux cleaned = -3.00123e-06 Jy ! Component: 150 - total flux cleaned = -1.44768e-06 Jy ! Component: 200 - total flux cleaned = 2.02746e-05 Jy ! Total flux subtracted in 200 components = 2.02746e-05 Jy ! Clean residual min=-0.002323 max=0.002087 Jy/beam ! Clean residual mean=0.000001 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.785318 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.785318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056450Jy sigma=0.386970 ! Fit after self-cal, rms=0.056449Jy sigma=0.386967 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056449Jy sigma=0.386967 ! Fit after self-cal, rms=0.056475Jy sigma=0.386816 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.971 mas, bmaj=2.417 mas, bpa=-23.29 degrees ! Estimated noise=0.808254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000984863 Jy ! Component: 100 - total flux cleaned = -0.0011532 Jy ! Component: 150 - total flux cleaned = -0.00124732 Jy ! Component: 200 - total flux cleaned = -0.0013296 Jy ! Total flux subtracted in 200 components = -0.0013296 Jy ! Clean residual min=-0.001947 max=0.002240 Jy/beam ! Clean residual mean=0.000001 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.783989 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 93 components and 0.783989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056472Jy sigma=0.386744 ! Fit after self-cal, rms=0.056469Jy sigma=0.386736 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.8, 6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200261 Jy ! Component: 100 - total flux cleaned = 0.00224812 Jy ! Component: 150 - total flux cleaned = 0.00228588 Jy ! Component: 200 - total flux cleaned = 0.00222342 Jy ! Total flux subtracted in 200 components = 0.00222342 Jy ! Clean residual min=-0.001582 max=0.001782 Jy/beam ! Clean residual mean=0.000001 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.786212 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 117 components and 0.786212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056391Jy sigma=0.386246 ! Fit after self-cal, rms=0.056386Jy sigma=0.386199 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.076 mas, bmaj=1.811 mas, bpa=-13.76 degrees ! Estimated noise=0.631185 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.076 x 1.811 at -13.76 degrees (North through East) ! Clean map min=-0.004023 max=0.64792 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056386Jy sigma=0.386199 ! Fit after self-cal, rms=0.048278Jy sigma=0.317207 ! Inverting map and beam ! Estimated beam: bmin=1.076 mas, bmaj=1.813 mas, bpa=-13.81 degrees ! Estimated noise=0.631377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000676867 Jy ! Component: 100 - total flux cleaned = 0.000720701 Jy ! Component: 150 - total flux cleaned = 0.000758531 Jy ! Component: 200 - total flux cleaned = 0.000726756 Jy ! Total flux subtracted in 200 components = 0.000726756 Jy ! Clean residual min=-0.001423 max=0.001486 Jy/beam ! Clean residual mean=0.000000 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.786939 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 141 components and 0.786939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048225Jy sigma=0.316802 ! Fit after self-cal, rms=0.048225Jy sigma=0.316795 ! Inverting map ! Added new window around map position (-1, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106642 Jy ! Component: 100 - total flux cleaned = 0.00141555 Jy ! Component: 150 - total flux cleaned = 0.00158314 Jy ! Component: 200 - total flux cleaned = 0.00170551 Jy ! Total flux subtracted in 200 components = 0.00170551 Jy ! Clean residual min=-0.001333 max=0.001302 Jy/beam ! Clean residual mean=0.000000 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.788644 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 159 components and 0.788644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048166Jy sigma=0.316369 ! Fit after self-cal, rms=0.048165Jy sigma=0.316356 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048165Jy sigma=0.316356 ! Fit after self-cal, rms=0.048149Jy sigma=0.316317 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8913 mas, bmaj=1.554 mas, bpa=-12.27 degrees ! Estimated noise=1.2906 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.478222 Jy ! Component: 100 - total flux cleaned = 0.614221 Jy ! Component: 150 - total flux cleaned = 0.672117 Jy ! Component: 200 - total flux cleaned = 0.705636 Jy ! Total flux subtracted in 200 components = 0.705636 Jy ! Clean residual min=-0.008821 max=0.018379 Jy/beam ! Clean residual mean=-0.000001 rms=0.002113 Jy/beam ! Combined flux in latest and established models = 0.705636 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.705636 Jy ! Inverting map and beam ! Estimated beam: bmin=1.076 mas, bmaj=1.813 mas, bpa=-13.84 degrees ! Estimated noise=0.631307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309793 Jy ! Component: 100 - total flux cleaned = 0.0487873 Jy ! Component: 150 - total flux cleaned = 0.0595237 Jy ! Component: 200 - total flux cleaned = 0.0662219 Jy ! Total flux subtracted in 200 components = 0.0662219 Jy ! Clean residual min=-0.003098 max=0.004305 Jy/beam ! Clean residual mean=-0.000000 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.771858 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 39 components and 0.771858 Jy ! Inverting map ! Added new window around map position (-22, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471757 Jy ! Component: 100 - total flux cleaned = 0.00737378 Jy ! Component: 150 - total flux cleaned = 0.00886323 Jy ! Component: 200 - total flux cleaned = 0.0101426 Jy ! Total flux subtracted in 200 components = 0.0101426 Jy ! Clean residual min=-0.002450 max=0.002707 Jy/beam ! Clean residual mean=0.000000 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.782 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 65 components and 0.782 Jy ! Inverting map ! Added new window around map position (22.2, 5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235542 Jy ! Component: 100 - total flux cleaned = 0.00298793 Jy ! Component: 150 - total flux cleaned = 0.00368668 Jy ! Component: 200 - total flux cleaned = 0.00419841 Jy ! Total flux subtracted in 200 components = 0.00419841 Jy ! Clean residual min=-0.002105 max=0.002015 Jy/beam ! Clean residual mean=0.000000 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.786199 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 96 components and 0.786199 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.97 mas, bmaj=2.418 mas, bpa=-23.36 degrees ! Estimated noise=0.808351 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152245 Jy ! Component: 100 - total flux cleaned = 0.00234336 Jy ! Component: 150 - total flux cleaned = 0.00271535 Jy ! Component: 200 - total flux cleaned = 0.00309629 Jy ! Total flux subtracted in 200 components = 0.00309629 Jy ! Clean residual min=-0.001468 max=0.001619 Jy/beam ! Clean residual mean=0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.789295 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000392307 Jy ! Component: 100 - total flux cleaned = 0.000711939 Jy ! Component: 150 - total flux cleaned = 0.000967495 Jy ! Component: 200 - total flux cleaned = 0.00113434 Jy ! Total flux subtracted in 200 components = 0.00113434 Jy ! Clean residual min=-0.001365 max=0.001392 Jy/beam ! Clean residual mean=0.000001 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.790429 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 144 components and 0.790429 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.076 mas, bmaj=1.813 mas, bpa=-13.84 degrees ! Estimated noise=0.631307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00019671 Jy ! Component: 100 - total flux cleaned = 0.000301661 Jy ! Component: 150 - total flux cleaned = 0.000301455 Jy ! Component: 200 - total flux cleaned = 0.000210298 Jy ! Total flux subtracted in 200 components = 0.000210298 Jy ! Clean residual min=-0.001616 max=0.001634 Jy/beam ! Clean residual mean=0.000000 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.790639 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 157 components and 0.79064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.048194Jy sigma=0.316741 ! Fit after self-cal, rms=0.048183Jy sigma=0.316663 wmodel J2231+5922_X_b_map.mod ! Writing 157 model components to file: J2231+5922_X_b_map.mod wobs J2231+5922_X_b_uvs.fits ! Writing UV FITS file: J2231+5922_X_b_uvs.fits wwins J2231+5922_X_b_map.win ! wwins: Wrote 7 windows to J2231+5922_X_b_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000321446 Jy ! Component: 100 - total flux cleaned = -0.000504042 Jy ! Component: 150 - total flux cleaned = -0.000722486 Jy ! Component: 200 - total flux cleaned = -0.000976339 Jy ! Component: 250 - total flux cleaned = -0.00117532 Jy ! Component: 300 - total flux cleaned = -0.00130306 Jy ! Component: 350 - total flux cleaned = -0.00136457 Jy ! Component: 400 - total flux cleaned = -0.00144366 Jy ! Component: 450 - total flux cleaned = -0.0014631 Jy ! Component: 500 - total flux cleaned = -0.00148202 Jy ! Component: 550 - total flux cleaned = -0.00151821 Jy ! Component: 600 - total flux cleaned = -0.00155359 Jy ! Component: 650 - total flux cleaned = -0.00157132 Jy ! Component: 700 - total flux cleaned = -0.00160561 Jy ! Component: 750 - total flux cleaned = -0.00162229 Jy ! Component: 800 - total flux cleaned = -0.00160612 Jy ! Component: 850 - total flux cleaned = -0.00159034 Jy ! Component: 900 - total flux cleaned = -0.00155885 Jy ! Component: 950 - total flux cleaned = -0.00154381 Jy ! Component: 1000 - total flux cleaned = -0.00152884 Jy ! Component: 1050 - total flux cleaned = -0.00149942 Jy ! Component: 1100 - total flux cleaned = -0.00145542 Jy ! Component: 1150 - total flux cleaned = -0.00141218 Jy ! Component: 1200 - total flux cleaned = -0.00144037 Jy ! Component: 1250 - total flux cleaned = -0.00139866 Jy ! Component: 1300 - total flux cleaned = -0.0014261 Jy ! Component: 1350 - total flux cleaned = -0.00139857 Jy ! Component: 1400 - total flux cleaned = -0.00131839 Jy ! Component: 1450 - total flux cleaned = -0.00130535 Jy ! Component: 1500 - total flux cleaned = -0.0012794 Jy ! Component: 1550 - total flux cleaned = -0.00125341 Jy ! Component: 1600 - total flux cleaned = -0.00126588 Jy ! Component: 1650 - total flux cleaned = -0.00121574 Jy ! Component: 1700 - total flux cleaned = -0.00120329 Jy ! Component: 1750 - total flux cleaned = -0.00116684 Jy ! Component: 1800 - total flux cleaned = -0.00111879 Jy ! Component: 1850 - total flux cleaned = -0.00116672 Jy ! Component: 1900 - total flux cleaned = -0.00114322 Jy ! Component: 1950 - total flux cleaned = -0.00111988 Jy ! Component: 2000 - total flux cleaned = -0.00114288 Jy ! Component: 2050 - total flux cleaned = -0.00115406 Jy ! Component: 2100 - total flux cleaned = -0.00109758 Jy ! Component: 2150 - total flux cleaned = -0.00108646 Jy ! Component: 2200 - total flux cleaned = -0.00108654 Jy ! Component: 2250 - total flux cleaned = -0.00107554 Jy ! Component: 2300 - total flux cleaned = -0.00105392 Jy ! Component: 2350 - total flux cleaned = -0.00103262 Jy ! Component: 2400 - total flux cleaned = -0.00101133 Jy ! Component: 2450 - total flux cleaned = -0.00100098 Jy ! Component: 2500 - total flux cleaned = -0.00101143 Jy ! Component: 2550 - total flux cleaned = -0.000980588 Jy ! Component: 2600 - total flux cleaned = -0.00100097 Jy ! Component: 2650 - total flux cleaned = -0.00104128 Jy ! Component: 2700 - total flux cleaned = -0.000980962 Jy ! Component: 2750 - total flux cleaned = -0.000961089 Jy ! Component: 2800 - total flux cleaned = -0.000941371 Jy ! Component: 2850 - total flux cleaned = -0.000960863 Jy ! Component: 2900 - total flux cleaned = -0.000970537 Jy ! Component: 2950 - total flux cleaned = -0.00097059 Jy ! Component: 3000 - total flux cleaned = -0.000989741 Jy ! Component: 3050 - total flux cleaned = -0.00102745 Jy ! Component: 3100 - total flux cleaned = -0.00105534 Jy ! Component: 3150 - total flux cleaned = -0.00107383 Jy ! Component: 3200 - total flux cleaned = -0.00109204 Jy ! Component: 3250 - total flux cleaned = -0.00104657 Jy ! Component: 3300 - total flux cleaned = -0.00109172 Jy ! Component: 3350 - total flux cleaned = -0.00110077 Jy ! Component: 3400 - total flux cleaned = -0.00110075 Jy ! Component: 3450 - total flux cleaned = -0.00108308 Jy ! Component: 3500 - total flux cleaned = -0.00112679 Jy ! Component: 3550 - total flux cleaned = -0.00111802 Jy ! Component: 3600 - total flux cleaned = -0.00113524 Jy ! Component: 3650 - total flux cleaned = -0.00116945 Jy ! Component: 3700 - total flux cleaned = -0.00115253 Jy ! Component: 3750 - total flux cleaned = -0.0011862 Jy ! Component: 3800 - total flux cleaned = -0.00122799 Jy ! Component: 3850 - total flux cleaned = -0.00121962 Jy ! Component: 3900 - total flux cleaned = -0.00124424 Jy ! Component: 3950 - total flux cleaned = -0.00124421 Jy ! Component: 4000 - total flux cleaned = -0.00126044 Jy ! Component: 4050 - total flux cleaned = -0.0012604 Jy ! Total flux subtracted in 4096 components = -0.00129248 Jy ! Clean residual min=-0.000416 max=0.000497 Jy/beam ! Clean residual mean=0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.789347 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 489 components and 0.789347 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2231+5922_X_b_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.076 x 1.813 at -13.84 degrees (North through East) ! Clean map min=-0.0021819 max=0.64875 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2231+5922_X_b_map.fits wmodel /image_prod/ug002_uva//J2231+5922_X_b_map.mod ! Writing 489 model components to file: /image_prod/ug002_uva//J2231+5922_X_b_map.mod wobs /image_prod/ug002_uva//J2231+5922_X_b_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2231+5922_X_b_uvs.fits wwins /image_prod/ug002_uva//J2231+5922_X_b_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J2231+5922_X_b_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.648746 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000139012 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0642836 0.0642836 0.128567 0.257134 0.514268 1.02854 2.05707 4.11415 8.2283 16.4566 32.9132 65.8264 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.648 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4666.82 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2231+5922_X_b_dfm.log closed on Thu Mar 5 05:47:38 2020