! Started logfile: /image_prod/ug002_uva//J2230+6946_X_o_dfm.log on Thu Mar 5 05:46:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2230+6946_X_o_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2230+6946_X_o_uva.fits ! AN table 1: 28 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.740079 visibilities/baseline/integration-bin. ! Found source: J2230+6946 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8952 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2230+6946_X_o] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.215496Jy sigma=7.993743 ! Fit after self-cal, rms=0.432994Jy sigma=3.053727 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7822 mas, bmaj=0.8647 mas, bpa=88.52 degrees ! Estimated noise=1.81659 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.441735 Jy ! Component: 100 - total flux cleaned = 0.600028 Jy ! Total flux subtracted in 100 components = 0.600028 Jy ! Clean residual min=-0.042672 max=0.075990 Jy/beam ! Clean residual mean=0.000053 rms=0.008581 Jy/beam ! Combined flux in latest and established models = 0.600028 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.600028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.191475Jy sigma=1.301085 ! Fit after self-cal, rms=0.190724Jy sigma=1.295537 ! Inverting map ! Added new window around map position (1.4, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0859238 Jy ! Component: 100 - total flux cleaned = 0.117371 Jy ! Total flux subtracted in 100 components = 0.117371 Jy ! Clean residual min=-0.040487 max=0.054605 Jy/beam ! Clean residual mean=0.000000 rms=0.006474 Jy/beam ! Combined flux in latest and established models = 0.7174 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.7174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.142310Jy sigma=0.972445 ! Fit after self-cal, rms=0.140727Jy sigma=0.962913 ! Inverting map ! Added new window around map position (-1.2, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0402351 Jy ! Component: 100 - total flux cleaned = 0.0502336 Jy ! Total flux subtracted in 100 components = 0.0502336 Jy ! Clean residual min=-0.030021 max=0.031717 Jy/beam ! Clean residual mean=-0.000022 rms=0.005114 Jy/beam ! Combined flux in latest and established models = 0.767633 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.767633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.124466Jy sigma=0.835319 ! Fit after self-cal, rms=0.124391Jy sigma=0.834834 ! Inverting map ! Added new window around map position (-7.2, 4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135986 Jy ! Component: 100 - total flux cleaned = 0.0182988 Jy ! Total flux subtracted in 100 components = 0.0182988 Jy ! Clean residual min=-0.025593 max=0.026727 Jy/beam ! Clean residual mean=-0.000025 rms=0.004451 Jy/beam ! Combined flux in latest and established models = 0.785932 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.785932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115660Jy sigma=0.769521 ! Fit after self-cal, rms=0.115566Jy sigma=0.768819 ! Inverting map ! Added new window around map position (2.2, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00531725 Jy ! Component: 100 - total flux cleaned = 0.00619048 Jy ! Total flux subtracted in 100 components = 0.00619048 Jy ! Clean residual min=-0.023354 max=0.022428 Jy/beam ! Clean residual mean=-0.000026 rms=0.003967 Jy/beam ! Combined flux in latest and established models = 0.792123 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.792123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109239Jy sigma=0.722069 ! Fit after self-cal, rms=0.109179Jy sigma=0.721394 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9713 mas, bmaj=1.091 mas, bpa=81.77 degrees ! Estimated noise=1.15953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00387066 Jy ! Component: 100 - total flux cleaned = -0.0060365 Jy ! Component: 150 - total flux cleaned = -0.00722926 Jy ! Component: 200 - total flux cleaned = -0.00775896 Jy ! Total flux subtracted in 200 components = -0.00775896 Jy ! Clean residual min=-0.020122 max=0.018691 Jy/beam ! Clean residual mean=-0.000052 rms=0.003444 Jy/beam ! Combined flux in latest and established models = 0.784364 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.784364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101993Jy sigma=0.670110 ! Fit after self-cal, rms=0.101913Jy sigma=0.669316 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9713 x 1.091 at 81.77 degrees (North through East) ! Clean map min=-0.03302 max=0.58669 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.90 KP 1.07 ! LA 1.05 MK 1.04 OV 0.93 PT 0.97 ! SC 1.08 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.89 KP 1.07 ! LA 1.05 MK 1.03 OV 0.95 PT 0.96 ! SC 1.08 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.88 KP 1.06 ! LA 1.05 MK 1.04 OV 0.95 PT 0.97 ! SC 1.08 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.89 KP 1.06 ! LA 1.05 MK 1.07 OV 0.93 PT 0.97 ! SC 1.06 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.89 KP 1.05 ! LA 1.06 MK 1.05 OV 0.94 PT 0.97 ! SC 1.07 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.90 KP 1.06 ! LA 1.05 MK 1.04 OV 0.93 PT 0.97 ! SC 1.06 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.90 KP 1.06 ! LA 1.06 MK 1.04 OV 0.94 PT 0.98 ! SC 1.05 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.91 KP 1.05 ! LA 1.05 MK 1.05 OV 0.95 PT 0.97 ! SC 1.06 ! ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.89 KP 1.06 ! LA 1.07 MK 1.03 OV 0.94 PT 0.96 ! SC 1.05 ! ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.90 KP 1.05 ! LA 1.06 MK 1.06 OV 0.94 PT 0.98 ! SC 1.07 ! ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.89 KP 1.04 ! LA 1.07 MK 1.01 OV 0.92 PT 0.99 ! SC 1.09 ! ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 0.90 KP 1.07 ! LA 1.07 MK 1.01 OV 0.94 PT 0.97 ! SC 1.05 ! ! ! Fit before self-cal, rms=0.101913Jy sigma=0.669316 ! Fit after self-cal, rms=0.087781Jy sigma=0.581413 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9856 mas, bmaj=1.104 mas, bpa=80.42 degrees ! Estimated noise=1.14998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000898317 Jy ! Component: 100 - total flux cleaned = -0.00541719 Jy ! Component: 150 - total flux cleaned = -0.00693648 Jy ! Component: 200 - total flux cleaned = -0.00825819 Jy ! Total flux subtracted in 200 components = -0.00825819 Jy ! Clean residual min=-0.013102 max=0.013488 Jy/beam ! Clean residual mean=-0.000009 rms=0.002361 Jy/beam ! Combined flux in latest and established models = 0.776105 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.776105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084153Jy sigma=0.547946 ! Fit after self-cal, rms=0.083984Jy sigma=0.546303 ! Inverting map ! Added new window around map position (-3.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00529738 Jy ! Component: 100 - total flux cleaned = 0.00579178 Jy ! Component: 150 - total flux cleaned = 0.0047769 Jy ! Component: 200 - total flux cleaned = 0.00385594 Jy ! Total flux subtracted in 200 components = 0.00385594 Jy ! Clean residual min=-0.011056 max=0.010680 Jy/beam ! Clean residual mean=-0.000013 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.779961 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.779961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080307Jy sigma=0.520672 ! Fit after self-cal, rms=0.080149Jy sigma=0.519309 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080149Jy sigma=0.519309 ! Fit after self-cal, rms=0.092584Jy sigma=0.442801 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9848 mas, bmaj=1.184 mas, bpa=-78.96 degrees ! Estimated noise=1.20752 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000666911 Jy ! Component: 100 - total flux cleaned = 0.00131512 Jy ! Component: 150 - total flux cleaned = 0.00150229 Jy ! Component: 200 - total flux cleaned = 0.00149482 Jy ! Total flux subtracted in 200 components = 0.00149482 Jy ! Clean residual min=-0.005029 max=0.005963 Jy/beam ! Clean residual mean=0.000018 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.781456 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.781456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091674Jy sigma=0.436194 ! Fit after self-cal, rms=0.091648Jy sigma=0.435846 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 4.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233191 Jy ! Component: 100 - total flux cleaned = 0.00189294 Jy ! Component: 150 - total flux cleaned = 0.00176695 Jy ! Component: 200 - total flux cleaned = 0.00165347 Jy ! Total flux subtracted in 200 components = 0.00165347 Jy ! Clean residual min=-0.004681 max=0.005081 Jy/beam ! Clean residual mean=0.000015 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.78311 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 103 components and 0.78311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091186Jy sigma=0.432053 ! Fit after self-cal, rms=0.091157Jy sigma=0.431904 ! Inverting map ! Added new window around map position (6.4, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0047291 Jy ! Component: 100 - total flux cleaned = 0.00499941 Jy ! Component: 150 - total flux cleaned = 0.00476736 Jy ! Component: 200 - total flux cleaned = 0.00476639 Jy ! Total flux subtracted in 200 components = 0.00476639 Jy ! Clean residual min=-0.004288 max=0.004457 Jy/beam ! Clean residual mean=0.000012 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.787876 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 120 components and 0.787876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090770Jy sigma=0.428516 ! Fit after self-cal, rms=0.090744Jy sigma=0.428357 ! Inverting map ! Added new window around map position (6.2, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293819 Jy ! Component: 100 - total flux cleaned = 0.00375771 Jy ! Component: 150 - total flux cleaned = 0.00418641 Jy ! Component: 200 - total flux cleaned = 0.00428483 Jy ! Total flux subtracted in 200 components = 0.00428483 Jy ! Clean residual min=-0.003970 max=0.003954 Jy/beam ! Clean residual mean=0.000011 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.792161 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 130 components and 0.792161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090454Jy sigma=0.425689 ! Fit after self-cal, rms=0.090434Jy sigma=0.425610 ! Inverting map ! Added new window around map position (7.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176404 Jy ! Component: 100 - total flux cleaned = 0.00144626 Jy ! Component: 150 - total flux cleaned = 0.00134626 Jy ! Component: 200 - total flux cleaned = 0.00143785 Jy ! Total flux subtracted in 200 components = 0.00143785 Jy ! Clean residual min=-0.003715 max=0.003773 Jy/beam ! Clean residual mean=0.000011 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.793599 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 141 components and 0.793599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090180Jy sigma=0.423597 ! Fit after self-cal, rms=0.090165Jy sigma=0.423510 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090165Jy sigma=0.423510 ! Fit after self-cal, rms=0.087415Jy sigma=0.422128 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9854 mas, bmaj=1.175 mas, bpa=-79 degrees ! Estimated noise=1.20322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0019992 Jy ! Component: 100 - total flux cleaned = -0.00233434 Jy ! Component: 150 - total flux cleaned = -0.00271808 Jy ! Component: 200 - total flux cleaned = -0.00280321 Jy ! Total flux subtracted in 200 components = -0.00280321 Jy ! Clean residual min=-0.003577 max=0.003688 Jy/beam ! Clean residual mean=0.000011 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.790796 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 147 components and 0.790795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087139Jy sigma=0.420334 ! Fit after self-cal, rms=0.087127Jy sigma=0.420249 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259844 Jy ! Component: 100 - total flux cleaned = 0.00251164 Jy ! Component: 150 - total flux cleaned = 0.00259355 Jy ! Component: 200 - total flux cleaned = 0.00243593 Jy ! Total flux subtracted in 200 components = 0.00243593 Jy ! Clean residual min=-0.003600 max=0.003312 Jy/beam ! Clean residual mean=0.000008 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.793231 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 158 components and 0.793231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086917Jy sigma=0.418627 ! Fit after self-cal, rms=0.086907Jy sigma=0.418561 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086907Jy sigma=0.418561 ! Fit after self-cal, rms=0.086347Jy sigma=0.418188 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.518 mas, bmaj=2.713 mas, bpa=69.26 degrees ! Estimated noise=1.64069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286457 Jy ! Component: 100 - total flux cleaned = -0.000496673 Jy ! Component: 150 - total flux cleaned = -0.000674526 Jy ! Component: 200 - total flux cleaned = -0.000777091 Jy ! Total flux subtracted in 200 components = -0.000777091 Jy ! Clean residual min=-0.003493 max=0.003015 Jy/beam ! Clean residual mean=0.000013 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.792454 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 172 components and 0.792454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086268Jy sigma=0.417625 ! Fit after self-cal, rms=0.086264Jy sigma=0.417588 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217662 Jy ! Component: 100 - total flux cleaned = -0.000403405 Jy ! Component: 150 - total flux cleaned = -0.000447668 Jy ! Component: 200 - total flux cleaned = -0.000486621 Jy ! Total flux subtracted in 200 components = -0.000486621 Jy ! Clean residual min=-0.003462 max=0.002996 Jy/beam ! Clean residual mean=0.000013 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.791968 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 181 components and 0.791968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086231Jy sigma=0.417328 ! Fit after self-cal, rms=0.086228Jy sigma=0.417310 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9856 mas, bmaj=1.173 mas, bpa=-79.02 degrees ! Estimated noise=1.20146 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9856 x 1.173 at -79.02 degrees (North through East) ! Clean map min=-0.022003 max=0.59886 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086228Jy sigma=0.417310 ! Fit after self-cal, rms=0.093377Jy sigma=0.356231 ! Inverting map and beam ! Estimated beam: bmin=0.9854 mas, bmaj=1.172 mas, bpa=-79.16 degrees ! Estimated noise=1.20033 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000334156 Jy ! Component: 100 - total flux cleaned = -0.000156364 Jy ! Component: 150 - total flux cleaned = -7.3876e-05 Jy ! Component: 200 - total flux cleaned = -0.000149251 Jy ! Total flux subtracted in 200 components = -0.000149251 Jy ! Clean residual min=-0.003445 max=0.003172 Jy/beam ! Clean residual mean=0.000005 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.791818 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 196 components and 0.791818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093222Jy sigma=0.354855 ! Fit after self-cal, rms=0.093222Jy sigma=0.354836 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.76627e-05 Jy ! Component: 100 - total flux cleaned = -5.98161e-05 Jy ! Component: 150 - total flux cleaned = -5.80769e-05 Jy ! Component: 200 - total flux cleaned = -5.77663e-05 Jy ! Total flux subtracted in 200 components = -5.77663e-05 Jy ! Clean residual min=-0.003452 max=0.003011 Jy/beam ! Clean residual mean=0.000005 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.791761 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 204 components and 0.791761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093118Jy sigma=0.353962 ! Fit after self-cal, rms=0.093117Jy sigma=0.353952 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093117Jy sigma=0.353952 ! Fit after self-cal, rms=0.090546Jy sigma=0.353807 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7766 mas, bmaj=0.9336 mas, bpa=-73.35 degrees ! Estimated noise=1.93264 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.458921 Jy ! Component: 100 - total flux cleaned = 0.602937 Jy ! Component: 150 - total flux cleaned = 0.673159 Jy ! Component: 200 - total flux cleaned = 0.718841 Jy ! Total flux subtracted in 200 components = 0.718841 Jy ! Clean residual min=-0.019290 max=0.024897 Jy/beam ! Clean residual mean=0.000027 rms=0.003114 Jy/beam ! Combined flux in latest and established models = 0.71884 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.71884 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9857 mas, bmaj=1.171 mas, bpa=-79.24 degrees ! Estimated noise=1.19893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350115 Jy ! Component: 100 - total flux cleaned = 0.0474579 Jy ! Component: 150 - total flux cleaned = 0.051595 Jy ! Component: 200 - total flux cleaned = 0.0544993 Jy ! Total flux subtracted in 200 components = 0.0544993 Jy ! Clean residual min=-0.010162 max=0.010091 Jy/beam ! Clean residual mean=0.000011 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.77334 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.77334 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.518 mas, bmaj=2.711 mas, bpa=69.12 degrees ! Estimated noise=1.63961 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258247 Jy ! Component: 100 - total flux cleaned = 0.00328461 Jy ! Component: 150 - total flux cleaned = 0.00494685 Jy ! Component: 200 - total flux cleaned = 0.00641176 Jy ! Total flux subtracted in 200 components = 0.00641176 Jy ! Clean residual min=-0.004839 max=0.004401 Jy/beam ! Clean residual mean=0.000017 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.779751 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130201 Jy ! Component: 100 - total flux cleaned = 0.00292633 Jy ! Component: 150 - total flux cleaned = 0.00452609 Jy ! Component: 200 - total flux cleaned = 0.00561863 Jy ! Total flux subtracted in 200 components = 0.00561863 Jy ! Clean residual min=-0.004167 max=0.003972 Jy/beam ! Clean residual mean=0.000011 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.78537 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 65 components and 0.78537 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9857 mas, bmaj=1.171 mas, bpa=-79.24 degrees ! Estimated noise=1.19893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000581357 Jy ! Component: 100 - total flux cleaned = -0.000576699 Jy ! Component: 150 - total flux cleaned = -0.00058165 Jy ! Component: 200 - total flux cleaned = -0.000578082 Jy ! Total flux subtracted in 200 components = -0.000578082 Jy ! Clean residual min=-0.007470 max=0.007493 Jy/beam ! Clean residual mean=0.000006 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.784792 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 0.784792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108729Jy sigma=0.405494 ! Fit after self-cal, rms=0.104265Jy sigma=0.399869 wmodel J2230+6946_X_o_map.mod ! Writing 79 model components to file: J2230+6946_X_o_map.mod wobs J2230+6946_X_o_uvs.fits ! Writing UV FITS file: J2230+6946_X_o_uvs.fits wwins J2230+6946_X_o_map.win ! wwins: Wrote 12 windows to J2230+6946_X_o_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102716 Jy ! Component: 100 - total flux cleaned = -0.0012673 Jy ! Component: 150 - total flux cleaned = -0.00137905 Jy ! Component: 200 - total flux cleaned = -0.00148798 Jy ! Component: 250 - total flux cleaned = -0.00148679 Jy ! Component: 300 - total flux cleaned = -0.00148673 Jy ! Component: 350 - total flux cleaned = -0.00169156 Jy ! Component: 400 - total flux cleaned = -0.00199127 Jy ! Component: 450 - total flux cleaned = -0.00218783 Jy ! Component: 500 - total flux cleaned = -0.00238026 Jy ! Component: 550 - total flux cleaned = -0.00247535 Jy ! Component: 600 - total flux cleaned = -0.00275584 Jy ! Component: 650 - total flux cleaned = -0.00284765 Jy ! Component: 700 - total flux cleaned = -0.00293917 Jy ! Component: 750 - total flux cleaned = -0.00320691 Jy ! Component: 800 - total flux cleaned = -0.00338373 Jy ! Component: 850 - total flux cleaned = -0.0035578 Jy ! Component: 900 - total flux cleaned = -0.0036437 Jy ! Component: 950 - total flux cleaned = -0.0036444 Jy ! Component: 1000 - total flux cleaned = -0.00397993 Jy ! Component: 1050 - total flux cleaned = -0.00414527 Jy ! Component: 1100 - total flux cleaned = -0.00439017 Jy ! Component: 1150 - total flux cleaned = -0.00447043 Jy ! Component: 1200 - total flux cleaned = -0.00455082 Jy ! Component: 1250 - total flux cleaned = -0.00470909 Jy ! Component: 1300 - total flux cleaned = -0.00486482 Jy ! Component: 1350 - total flux cleaned = -0.00501872 Jy ! Component: 1400 - total flux cleaned = -0.00517145 Jy ! Component: 1450 - total flux cleaned = -0.00532267 Jy ! Component: 1500 - total flux cleaned = -0.00539678 Jy ! Component: 1550 - total flux cleaned = -0.00554473 Jy ! Component: 1600 - total flux cleaned = -0.00561812 Jy ! Component: 1650 - total flux cleaned = -0.00576355 Jy ! Component: 1700 - total flux cleaned = -0.00583595 Jy ! Component: 1750 - total flux cleaned = -0.00583558 Jy ! Component: 1800 - total flux cleaned = -0.00590618 Jy ! Component: 1850 - total flux cleaned = -0.00604557 Jy ! Component: 1900 - total flux cleaned = -0.00611405 Jy ! Component: 1950 - total flux cleaned = -0.00611326 Jy ! Component: 2000 - total flux cleaned = -0.00604524 Jy ! Component: 2050 - total flux cleaned = -0.00611255 Jy ! Component: 2100 - total flux cleaned = -0.00611213 Jy ! Component: 2150 - total flux cleaned = -0.0061778 Jy ! Component: 2200 - total flux cleaned = -0.00611272 Jy ! Component: 2250 - total flux cleaned = -0.00611262 Jy ! Component: 2300 - total flux cleaned = -0.0062403 Jy ! Component: 2350 - total flux cleaned = -0.00605082 Jy ! Component: 2400 - total flux cleaned = -0.00617675 Jy ! Component: 2450 - total flux cleaned = -0.00623865 Jy ! Component: 2500 - total flux cleaned = -0.00629989 Jy ! Component: 2550 - total flux cleaned = -0.0062389 Jy ! Component: 2600 - total flux cleaned = -0.00617856 Jy ! Component: 2650 - total flux cleaned = -0.00629834 Jy ! Component: 2700 - total flux cleaned = -0.00635789 Jy ! Component: 2750 - total flux cleaned = -0.00641643 Jy ! Component: 2800 - total flux cleaned = -0.0062417 Jy ! Component: 2850 - total flux cleaned = -0.00635775 Jy ! Component: 2900 - total flux cleaned = -0.00635775 Jy ! Component: 2950 - total flux cleaned = -0.00635799 Jy ! Component: 3000 - total flux cleaned = -0.00647099 Jy ! Component: 3050 - total flux cleaned = -0.00641468 Jy ! Component: 3100 - total flux cleaned = -0.00647006 Jy ! Component: 3150 - total flux cleaned = -0.00663541 Jy ! Component: 3200 - total flux cleaned = -0.00663509 Jy ! Component: 3250 - total flux cleaned = -0.00668894 Jy ! Component: 3300 - total flux cleaned = -0.00668878 Jy ! Component: 3350 - total flux cleaned = -0.00663547 Jy ! Component: 3400 - total flux cleaned = -0.00674115 Jy ! Component: 3450 - total flux cleaned = -0.00668872 Jy ! Component: 3500 - total flux cleaned = -0.00674085 Jy ! Component: 3550 - total flux cleaned = -0.00668902 Jy ! Component: 3600 - total flux cleaned = -0.00653555 Jy ! Component: 3650 - total flux cleaned = -0.006587 Jy ! Component: 3700 - total flux cleaned = -0.0065368 Jy ! Component: 3750 - total flux cleaned = -0.006487 Jy ! Component: 3800 - total flux cleaned = -0.00648703 Jy ! Component: 3850 - total flux cleaned = -0.00648686 Jy ! Component: 3900 - total flux cleaned = -0.00638859 Jy ! Component: 3950 - total flux cleaned = -0.0063401 Jy ! Component: 4000 - total flux cleaned = -0.00624418 Jy ! Component: 4050 - total flux cleaned = -0.0062436 Jy ! Total flux subtracted in 4096 components = -0.0061483 Jy ! Clean residual min=-0.002365 max=0.002366 Jy/beam ! Clean residual mean=0.000007 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.778644 Jy keep ! Adding 197 model components to the UV plane model. ! The established model now contains 260 components and 0.778644 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2230+6946_X_o_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9857 x 1.171 at -79.24 degrees (North through East) ! Clean map min=-0.013402 max=0.60786 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2230+6946_X_o_map.fits wmodel /image_prod/ug002_uva//J2230+6946_X_o_map.mod ! Writing 260 model components to file: /image_prod/ug002_uva//J2230+6946_X_o_map.mod wobs /image_prod/ug002_uva//J2230+6946_X_o_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2230+6946_X_o_uvs.fits wwins /image_prod/ug002_uva//J2230+6946_X_o_map.win ! wwins: Wrote 13 windows to /image_prod/ug002_uva//J2230+6946_X_o_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.607861 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000685524 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.338329 0.338329 0.676658 1.35332 2.70663 5.41327 10.8265 21.6531 43.3061 86.6122 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.607 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 886.71 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2230+6946_X_o_dfm.log closed on Thu Mar 5 05:46:42 2020