! Started logfile: /image_prod/ug002_uva//J2230+6946_X_h_dfm.log on Thu Mar 5 05:45:58 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2230+6946_X_h_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2230+6946_X_h_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.830556 visibilities/baseline/integration-bin. ! Found source: J2230+6946 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 10764 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2230+6946_X_h] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.181606Jy sigma=8.655220 ! Fit after self-cal, rms=0.432294Jy sigma=3.367431 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7692 mas, bmaj=1.011 mas, bpa=-13.61 degrees ! Estimated noise=1.38162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.425217 Jy ! Component: 100 - total flux cleaned = 0.577329 Jy ! Total flux subtracted in 100 components = 0.577329 Jy ! Clean residual min=-0.017258 max=0.066838 Jy/beam ! Clean residual mean=-0.000009 rms=0.004143 Jy/beam ! Combined flux in latest and established models = 0.577329 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.577329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.142646Jy sigma=1.003110 ! Fit after self-cal, rms=0.142037Jy sigma=0.998673 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0727685 Jy ! Component: 100 - total flux cleaned = 0.108903 Jy ! Total flux subtracted in 100 components = 0.108903 Jy ! Clean residual min=-0.011989 max=0.017342 Jy/beam ! Clean residual mean=0.000005 rms=0.002191 Jy/beam ! Combined flux in latest and established models = 0.686233 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 11 components and 0.686233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085243Jy sigma=0.604803 ! Fit after self-cal, rms=0.085046Jy sigma=0.603469 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205157 Jy ! Component: 100 - total flux cleaned = 0.0327144 Jy ! Total flux subtracted in 100 components = 0.0327144 Jy ! Clean residual min=-0.010528 max=0.011165 Jy/beam ! Clean residual mean=0.000009 rms=0.001934 Jy/beam ! Combined flux in latest and established models = 0.718947 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 17 components and 0.718947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077742Jy sigma=0.559461 ! Fit after self-cal, rms=0.077699Jy sigma=0.559220 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9567 mas, bmaj=1.254 mas, bpa=-13.71 degrees ! Estimated noise=0.937681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149465 Jy ! Component: 100 - total flux cleaned = 0.0240513 Jy ! Component: 150 - total flux cleaned = 0.0297949 Jy ! Component: 200 - total flux cleaned = 0.0323882 Jy ! Total flux subtracted in 200 components = 0.0323882 Jy ! Clean residual min=-0.009243 max=0.011781 Jy/beam ! Clean residual mean=0.000027 rms=0.002194 Jy/beam ! Combined flux in latest and established models = 0.751335 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.751336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074097Jy sigma=0.535747 ! Fit after self-cal, rms=0.073764Jy sigma=0.533295 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9567 x 1.254 at -13.71 degrees (North through East) ! Clean map min=-0.0086791 max=0.57129 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.99 KP 1.03 ! LA 1.02 MK 1.04 NL 1.12 OV 0.90 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.00 KP 1.03 ! LA 1.01 MK 1.05 NL 1.11 OV 0.92 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.99 KP 1.04 ! LA 1.02 MK 1.05 NL 1.12 OV 0.92 ! PT 0.92 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.99 KP 1.02 ! LA 1.04 MK 1.05 NL 1.11 OV 0.92 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.98 KP 1.03 ! LA 1.03 MK 1.03 NL 1.13 OV 0.92 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.98 KP 1.04 ! LA 1.04 MK 1.04 NL 1.11 OV 0.92 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.99 KP 1.01 ! LA 1.01 MK 1.05 NL 1.12 OV 0.92 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.97 KP 1.05 ! LA 1.03 MK 1.06 NL 1.11 OV 0.91 ! PT 0.93 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.98 KP 1.03 ! LA 1.02 MK 1.06 NL 1.14 OV 0.92 ! PT 0.94 SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.99 KP 1.02 ! LA 1.03 MK 1.06 NL 1.11 OV 0.92 ! PT 0.92 SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 0.99 KP 1.04 ! LA 1.01 MK 1.03 NL 1.10 OV 0.91 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.98 KP 1.04 ! LA 1.03 MK 1.05 NL 1.13 OV 0.92 ! PT 0.91 SC 0.98 ! ! ! Fit before self-cal, rms=0.073764Jy sigma=0.533295 ! Fit after self-cal, rms=0.054165Jy sigma=0.397067 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9634 mas, bmaj=1.262 mas, bpa=-13.28 degrees ! Estimated noise=0.939636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00358657 Jy ! Component: 100 - total flux cleaned = -0.00467291 Jy ! Component: 150 - total flux cleaned = -0.00569056 Jy ! Component: 200 - total flux cleaned = -0.00642391 Jy ! Total flux subtracted in 200 components = -0.00642391 Jy ! Clean residual min=-0.003165 max=0.003974 Jy/beam ! Clean residual mean=0.000008 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.744912 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.744912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053563Jy sigma=0.392514 ! Fit after self-cal, rms=0.053518Jy sigma=0.392108 ! Inverting map ! Added new window around map position (-1.6, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285182 Jy ! Component: 100 - total flux cleaned = 0.00275292 Jy ! Component: 150 - total flux cleaned = 0.00250292 Jy ! Component: 200 - total flux cleaned = 0.00213287 Jy ! Total flux subtracted in 200 components = 0.00213287 Jy ! Clean residual min=-0.003023 max=0.002774 Jy/beam ! Clean residual mean=0.000008 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.747045 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 61 components and 0.747045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053170Jy sigma=0.389502 ! Fit after self-cal, rms=0.053142Jy sigma=0.389301 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053142Jy sigma=0.389301 ! Fit after self-cal, rms=0.050831Jy sigma=0.369196 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9615 mas, bmaj=1.259 mas, bpa=-13.45 degrees ! Estimated noise=0.939421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00154643 Jy ! Component: 100 - total flux cleaned = -0.00252471 Jy ! Component: 150 - total flux cleaned = -0.00266337 Jy ! Component: 200 - total flux cleaned = -0.00272509 Jy ! Total flux subtracted in 200 components = -0.00272509 Jy ! Clean residual min=-0.001994 max=0.002275 Jy/beam ! Clean residual mean=0.000007 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.744319 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 80 components and 0.744319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050594Jy sigma=0.367417 ! Fit after self-cal, rms=0.050579Jy sigma=0.367279 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131413 Jy ! Component: 100 - total flux cleaned = 0.00131507 Jy ! Component: 150 - total flux cleaned = 0.00131939 Jy ! Component: 200 - total flux cleaned = 0.00131885 Jy ! Total flux subtracted in 200 components = 0.00131885 Jy ! Clean residual min=-0.001936 max=0.001915 Jy/beam ! Clean residual mean=0.000007 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.745638 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.745638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050445Jy sigma=0.366291 ! Fit after self-cal, rms=0.050439Jy sigma=0.366247 ! Inverting map ! Added new window around map position (27.8, 38.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111373 Jy ! Component: 100 - total flux cleaned = 0.00111484 Jy ! Component: 150 - total flux cleaned = 0.00120918 Jy ! Component: 200 - total flux cleaned = 0.00133902 Jy ! Total flux subtracted in 200 components = 0.00133902 Jy ! Clean residual min=-0.001899 max=0.001745 Jy/beam ! Clean residual mean=0.000007 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.746977 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 97 components and 0.746977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050345Jy sigma=0.365543 ! Fit after self-cal, rms=0.050340Jy sigma=0.365510 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050340Jy sigma=0.365510 ! Fit after self-cal, rms=0.050295Jy sigma=0.365065 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9609 mas, bmaj=1.259 mas, bpa=-13.37 degrees ! Estimated noise=0.939458 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000764919 Jy ! Component: 100 - total flux cleaned = -0.00138907 Jy ! Component: 150 - total flux cleaned = -0.00161463 Jy ! Component: 200 - total flux cleaned = -0.00165555 Jy ! Total flux subtracted in 200 components = -0.00165555 Jy ! Clean residual min=-0.001797 max=0.001705 Jy/beam ! Clean residual mean=0.000007 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.745322 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 105 components and 0.745322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050210Jy sigma=0.364386 ! Fit after self-cal, rms=0.050207Jy sigma=0.364359 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161254 Jy ! Component: 100 - total flux cleaned = -0.00023656 Jy ! Component: 150 - total flux cleaned = -0.000271587 Jy ! Component: 200 - total flux cleaned = -0.000270998 Jy ! Total flux subtracted in 200 components = -0.000270998 Jy ! Clean residual min=-0.001748 max=0.001629 Jy/beam ! Clean residual mean=0.000007 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.745051 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 111 components and 0.745051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050162Jy sigma=0.364019 ! Fit after self-cal, rms=0.050159Jy sigma=0.364000 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050159Jy sigma=0.364000 ! Fit after self-cal, rms=0.050155Jy sigma=0.363890 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.381 mas, bmaj=2.414 mas, bpa=-35.79 degrees ! Estimated noise=1.27596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000932723 Jy ! Component: 100 - total flux cleaned = -0.0011983 Jy ! Component: 150 - total flux cleaned = -0.00130789 Jy ! Component: 200 - total flux cleaned = -0.00134617 Jy ! Total flux subtracted in 200 components = -0.00134617 Jy ! Clean residual min=-0.001864 max=0.001636 Jy/beam ! Clean residual mean=0.000018 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.743705 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 128 components and 0.743705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050135Jy sigma=0.363743 ! Fit after self-cal, rms=0.050135Jy sigma=0.363738 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.46698e-05 Jy ! Component: 100 - total flux cleaned = -4.82661e-05 Jy ! Component: 150 - total flux cleaned = -6.34295e-05 Jy ! Component: 200 - total flux cleaned = -7.75004e-05 Jy ! Total flux subtracted in 200 components = -7.75004e-05 Jy ! Clean residual min=-0.001853 max=0.001593 Jy/beam ! Clean residual mean=0.000018 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.743627 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 136 components and 0.743627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050128Jy sigma=0.363702 ! Fit after self-cal, rms=0.050128Jy sigma=0.363700 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9606 mas, bmaj=1.259 mas, bpa=-13.29 degrees ! Estimated noise=0.939601 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9606 x 1.259 at -13.29 degrees (North through East) ! Clean map min=-0.0015178 max=0.57365 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050128Jy sigma=0.363700 ! Fit after self-cal, rms=0.047415Jy sigma=0.339978 ! Inverting map and beam ! Estimated beam: bmin=0.9605 mas, bmaj=1.259 mas, bpa=-13.34 degrees ! Estimated noise=0.939613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336773 Jy ! Component: 100 - total flux cleaned = -0.000663576 Jy ! Component: 150 - total flux cleaned = -0.000794672 Jy ! Component: 200 - total flux cleaned = -0.000855453 Jy ! Total flux subtracted in 200 components = -0.000855453 Jy ! Clean residual min=-0.001668 max=0.001486 Jy/beam ! Clean residual mean=0.000008 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.742772 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 141 components and 0.742772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047371Jy sigma=0.339628 ! Fit after self-cal, rms=0.047368Jy sigma=0.339610 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.96325e-05 Jy ! Component: 100 - total flux cleaned = -0.000177419 Jy ! Component: 150 - total flux cleaned = -0.000150603 Jy ! Component: 200 - total flux cleaned = -0.000150086 Jy ! Total flux subtracted in 200 components = -0.000150086 Jy ! Clean residual min=-0.001638 max=0.001472 Jy/beam ! Clean residual mean=0.000008 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.742621 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 147 components and 0.742622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047341Jy sigma=0.339393 ! Fit after self-cal, rms=0.047339Jy sigma=0.339380 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047339Jy sigma=0.339380 ! Fit after self-cal, rms=0.047350Jy sigma=0.339341 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7721 mas, bmaj=1.015 mas, bpa=-12.99 degrees ! Estimated noise=1.3848 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.42639 Jy ! Component: 100 - total flux cleaned = 0.579061 Jy ! Component: 150 - total flux cleaned = 0.651265 Jy ! Component: 200 - total flux cleaned = 0.68736 Jy ! Total flux subtracted in 200 components = 0.68736 Jy ! Clean residual min=-0.005383 max=0.016650 Jy/beam ! Clean residual mean=-0.000002 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.68736 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.68736 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9604 mas, bmaj=1.259 mas, bpa=-13.27 degrees ! Estimated noise=0.939893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243952 Jy ! Component: 100 - total flux cleaned = 0.0361678 Jy ! Component: 150 - total flux cleaned = 0.0425987 Jy ! Component: 200 - total flux cleaned = 0.0464101 Jy ! Total flux subtracted in 200 components = 0.0464101 Jy ! Clean residual min=-0.001882 max=0.002220 Jy/beam ! Clean residual mean=0.000008 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.73377 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 29 components and 0.73377 Jy ! Inverting map ! Added new window around map position (8.2, 9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279907 Jy ! Component: 100 - total flux cleaned = 0.00481785 Jy ! Component: 150 - total flux cleaned = 0.00594224 Jy ! Component: 200 - total flux cleaned = 0.00667847 Jy ! Total flux subtracted in 200 components = 0.00667847 Jy ! Clean residual min=-0.001723 max=0.001846 Jy/beam ! Clean residual mean=0.000007 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.740449 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 0.740449 Jy ! Inverting map ! Added new window around map position (3.4, 4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121129 Jy ! Component: 100 - total flux cleaned = 0.00173988 Jy ! Component: 150 - total flux cleaned = 0.00223726 Jy ! Component: 200 - total flux cleaned = 0.00270832 Jy ! Total flux subtracted in 200 components = 0.00270832 Jy ! Clean residual min=-0.001637 max=0.001613 Jy/beam ! Clean residual mean=0.000007 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.743157 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 55 components and 0.743157 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.382 mas, bmaj=2.414 mas, bpa=-36.11 degrees ! Estimated noise=1.27616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350567 Jy ! Component: 100 - total flux cleaned = 0.000659754 Jy ! Component: 150 - total flux cleaned = 0.00081603 Jy ! Component: 200 - total flux cleaned = 0.000937228 Jy ! Total flux subtracted in 200 components = 0.000937228 Jy ! Clean residual min=-0.001731 max=0.001582 Jy/beam ! Clean residual mean=0.000016 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.744094 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147617 Jy ! Component: 100 - total flux cleaned = 0.000269168 Jy ! Component: 150 - total flux cleaned = 0.000384353 Jy ! Component: 200 - total flux cleaned = 0.000477783 Jy ! Total flux subtracted in 200 components = 0.000477783 Jy ! Clean residual min=-0.001734 max=0.001581 Jy/beam ! Clean residual mean=0.000016 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.744572 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 89 components and 0.744572 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9604 mas, bmaj=1.259 mas, bpa=-13.27 degrees ! Estimated noise=0.939893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125186 Jy ! Component: 100 - total flux cleaned = -0.000126406 Jy ! Component: 150 - total flux cleaned = -2.75629e-05 Jy ! Component: 200 - total flux cleaned = 1.96104e-05 Jy ! Total flux subtracted in 200 components = 1.96104e-05 Jy ! Clean residual min=-0.001589 max=0.001548 Jy/beam ! Clean residual mean=0.000007 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.744592 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 101 components and 0.744592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.047610Jy sigma=0.341214 ! Fit after self-cal, rms=0.047589Jy sigma=0.341046 wmodel J2230+6946_X_h_map.mod ! Writing 101 model components to file: J2230+6946_X_h_map.mod wobs J2230+6946_X_h_uvs.fits ! Writing UV FITS file: J2230+6946_X_h_uvs.fits wwins J2230+6946_X_h_map.win ! wwins: Wrote 7 windows to J2230+6946_X_h_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177956 Jy ! Component: 100 - total flux cleaned = -0.000369821 Jy ! Component: 150 - total flux cleaned = -0.0003964 Jy ! Component: 200 - total flux cleaned = -0.000448202 Jy ! Component: 250 - total flux cleaned = -0.000347413 Jy ! Component: 300 - total flux cleaned = -0.000322814 Jy ! Component: 350 - total flux cleaned = -0.000322887 Jy ! Component: 400 - total flux cleaned = -0.000394814 Jy ! Component: 450 - total flux cleaned = -0.000394503 Jy ! Component: 500 - total flux cleaned = -0.000394046 Jy ! Component: 550 - total flux cleaned = -0.000439636 Jy ! Component: 600 - total flux cleaned = -0.000416788 Jy ! Component: 650 - total flux cleaned = -0.000505979 Jy ! Component: 700 - total flux cleaned = -0.000527484 Jy ! Component: 750 - total flux cleaned = -0.000461729 Jy ! Component: 800 - total flux cleaned = -0.000504944 Jy ! Component: 850 - total flux cleaned = -0.000440716 Jy ! Component: 900 - total flux cleaned = -0.000355593 Jy ! Component: 950 - total flux cleaned = -0.000271209 Jy ! Component: 1000 - total flux cleaned = -0.000125996 Jy ! Component: 1050 - total flux cleaned = -0.000188224 Jy ! Component: 1100 - total flux cleaned = -0.000167563 Jy ! Component: 1150 - total flux cleaned = -8.66272e-05 Jy ! Component: 1200 - total flux cleaned = -4.70074e-05 Jy ! Component: 1250 - total flux cleaned = 5.23579e-05 Jy ! Component: 1300 - total flux cleaned = 5.22318e-05 Jy ! Component: 1350 - total flux cleaned = 9.13392e-05 Jy ! Component: 1400 - total flux cleaned = 0.000207936 Jy ! Component: 1450 - total flux cleaned = 0.000188735 Jy ! Component: 1500 - total flux cleaned = 0.000208077 Jy ! Component: 1550 - total flux cleaned = 0.000302958 Jy ! Component: 1600 - total flux cleaned = 0.000359869 Jy ! Component: 1650 - total flux cleaned = 0.000490444 Jy ! Component: 1700 - total flux cleaned = 0.000546095 Jy ! Component: 1750 - total flux cleaned = 0.00056449 Jy ! Component: 1800 - total flux cleaned = 0.000601143 Jy ! Component: 1850 - total flux cleaned = 0.000673818 Jy ! Component: 1900 - total flux cleaned = 0.000710273 Jy ! Component: 1950 - total flux cleaned = 0.000818148 Jy ! Component: 2000 - total flux cleaned = 0.000835943 Jy ! Component: 2050 - total flux cleaned = 0.000942212 Jy ! Component: 2100 - total flux cleaned = 0.000977384 Jy ! Component: 2150 - total flux cleaned = 0.00104743 Jy ! Component: 2200 - total flux cleaned = 0.00115177 Jy ! Component: 2250 - total flux cleaned = 0.00120375 Jy ! Component: 2300 - total flux cleaned = 0.00130675 Jy ! Component: 2350 - total flux cleaned = 0.00135813 Jy ! Component: 2400 - total flux cleaned = 0.00149384 Jy ! Component: 2450 - total flux cleaned = 0.00151063 Jy ! Component: 2500 - total flux cleaned = 0.00161132 Jy ! Component: 2550 - total flux cleaned = 0.00169476 Jy ! Component: 2600 - total flux cleaned = 0.00176102 Jy ! Component: 2650 - total flux cleaned = 0.00186003 Jy ! Component: 2700 - total flux cleaned = 0.00195853 Jy ! Component: 2750 - total flux cleaned = 0.00199092 Jy ! Component: 2800 - total flux cleaned = 0.00212053 Jy ! Component: 2850 - total flux cleaned = 0.00215275 Jy ! Component: 2900 - total flux cleaned = 0.00224907 Jy ! Component: 2950 - total flux cleaned = 0.00234459 Jy ! Component: 3000 - total flux cleaned = 0.00242413 Jy ! Component: 3050 - total flux cleaned = 0.00258201 Jy ! Component: 3100 - total flux cleaned = 0.00261332 Jy ! Component: 3150 - total flux cleaned = 0.00272272 Jy ! Component: 3200 - total flux cleaned = 0.00280034 Jy ! Component: 3250 - total flux cleaned = 0.00289301 Jy ! Component: 3300 - total flux cleaned = 0.00289297 Jy ! Component: 3350 - total flux cleaned = 0.00298474 Jy ! Component: 3400 - total flux cleaned = 0.00303041 Jy ! Component: 3450 - total flux cleaned = 0.00306063 Jy ! Component: 3500 - total flux cleaned = 0.00313593 Jy ! Component: 3550 - total flux cleaned = 0.00322594 Jy ! Component: 3600 - total flux cleaned = 0.00330068 Jy ! Component: 3650 - total flux cleaned = 0.00330064 Jy ! Component: 3700 - total flux cleaned = 0.00334506 Jy ! Component: 3750 - total flux cleaned = 0.00341859 Jy ! Component: 3800 - total flux cleaned = 0.0035065 Jy ! Component: 3850 - total flux cleaned = 0.00352112 Jy ! Component: 3900 - total flux cleaned = 0.00363707 Jy ! Component: 3950 - total flux cleaned = 0.00360827 Jy ! Component: 4000 - total flux cleaned = 0.00369431 Jy ! Component: 4050 - total flux cleaned = 0.00372287 Jy ! Total flux subtracted in 4096 components = 0.00379409 Jy ! Clean residual min=-0.000771 max=0.000747 Jy/beam ! Clean residual mean=0.000003 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.748386 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 439 components and 0.748386 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2230+6946_X_h_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9604 x 1.259 at -13.27 degrees (North through East) ! Clean map min=-0.0010669 max=0.5748 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2230+6946_X_h_map.fits wmodel /image_prod/ug002_uva//J2230+6946_X_h_map.mod ! Writing 439 model components to file: /image_prod/ug002_uva//J2230+6946_X_h_map.mod wobs /image_prod/ug002_uva//J2230+6946_X_h_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2230+6946_X_h_uvs.fits wwins /image_prod/ug002_uva//J2230+6946_X_h_map.win ! wwins: Wrote 8 windows to /image_prod/ug002_uva//J2230+6946_X_h_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.574799 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000232773 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.121489 0.121489 0.242978 0.485956 0.971912 1.94382 3.88765 7.7753 15.5506 31.1012 62.2024 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.574 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2469.36 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2230+6946_X_h_dfm.log closed on Thu Mar 5 05:46:03 2020