! Started logfile: /image_prod/ug002_uva//J2230+6946_X_g_dfm.log on Thu Mar 5 05:45:51 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2230+6946_X_g_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2230+6946_X_g_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.763889 visibilities/baseline/integration-bin. ! Found source: J2230+6946 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7920 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2230+6946_X_g] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.204869Jy sigma=8.268135 ! Fit after self-cal, rms=0.411684Jy sigma=3.058648 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7087 mas, bmaj=0.8961 mas, bpa=-10.1 degrees ! Estimated noise=1.6234 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.457743 Jy ! Component: 100 - total flux cleaned = 0.628373 Jy ! Total flux subtracted in 100 components = 0.628373 Jy ! Clean residual min=-0.024209 max=0.075559 Jy/beam ! Clean residual mean=-0.000038 rms=0.005444 Jy/beam ! Combined flux in latest and established models = 0.628373 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.628373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.159054Jy sigma=1.077238 ! Fit after self-cal, rms=0.157844Jy sigma=1.068838 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0816009 Jy ! Component: 100 - total flux cleaned = 0.121635 Jy ! Total flux subtracted in 100 components = 0.121635 Jy ! Clean residual min=-0.015685 max=0.019182 Jy/beam ! Clean residual mean=-0.000022 rms=0.003129 Jy/beam ! Combined flux in latest and established models = 0.750008 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 0.750008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101309Jy sigma=0.694883 ! Fit after self-cal, rms=0.101151Jy sigma=0.693853 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221096 Jy ! Component: 100 - total flux cleaned = 0.0353892 Jy ! Total flux subtracted in 100 components = 0.0353892 Jy ! Clean residual min=-0.014948 max=0.017903 Jy/beam ! Clean residual mean=-0.000018 rms=0.002846 Jy/beam ! Combined flux in latest and established models = 0.785397 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 15 components and 0.785397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094975Jy sigma=0.652470 ! Fit after self-cal, rms=0.094951Jy sigma=0.652323 ! Inverting map ! Added new window around map position (9, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.015604 Jy ! Component: 100 - total flux cleaned = 0.0243374 Jy ! Total flux subtracted in 100 components = 0.0243374 Jy ! Clean residual min=-0.014339 max=0.014473 Jy/beam ! Clean residual mean=-0.000018 rms=0.002698 Jy/beam ! Combined flux in latest and established models = 0.809734 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.809734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092348Jy sigma=0.634688 ! Fit after self-cal, rms=0.092197Jy sigma=0.633538 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8613 mas, bmaj=1.063 mas, bpa=-11.31 degrees ! Estimated noise=1.16983 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00954332 Jy ! Component: 100 - total flux cleaned = 0.0153507 Jy ! Component: 150 - total flux cleaned = 0.0172589 Jy ! Component: 200 - total flux cleaned = 0.0183822 Jy ! Total flux subtracted in 200 components = 0.0183822 Jy ! Clean residual min=-0.017386 max=0.016143 Jy/beam ! Clean residual mean=-0.000028 rms=0.003378 Jy/beam ! Combined flux in latest and established models = 0.828116 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 33 components and 0.828116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090981Jy sigma=0.624913 ! Fit after self-cal, rms=0.090943Jy sigma=0.624626 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8613 x 1.063 at -11.31 degrees (North through East) ! Clean map min=-0.016438 max=0.60769 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.02 KP 1.04 ! LA 0.92 MK 1.06 NL 1.16 OV 0.91 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.01 KP 1.05 ! LA 0.92 MK 1.07 NL 1.16 OV 0.90 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.00 KP 1.06 ! LA 0.91 MK 1.06 NL 1.16 OV 0.91 ! SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.01 KP 1.07 ! LA 0.92 MK 1.06 NL 1.16 OV 0.91 ! SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.02 KP 1.05 ! LA 0.93 MK 1.06 NL 1.16 OV 0.91 ! SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.01 KP 1.06 ! LA 0.92 MK 1.06 NL 1.18 OV 0.89 ! SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.02 KP 1.05 ! LA 0.92 MK 1.08 NL 1.17 OV 0.92 ! SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 1.02 KP 1.03 ! LA 0.93 MK 1.06 NL 1.17 OV 0.92 ! SC 0.95 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.03 KP 1.07 ! LA 0.92 MK 1.07 NL 1.17 OV 0.91 ! SC 0.96 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.02 KP 1.08 ! LA 0.92 MK 1.07 NL 1.17 OV 0.91 ! SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.02 KP 1.06 ! LA 0.94 MK 1.07 NL 1.17 OV 0.92 ! SC 0.96 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.02 KP 1.06 ! LA 0.93 MK 1.07 NL 1.17 OV 0.91 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.090943Jy sigma=0.624626 ! Fit after self-cal, rms=0.061971Jy sigma=0.419521 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8688 mas, bmaj=1.067 mas, bpa=-10.51 degrees ! Estimated noise=1.17759 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0117193 Jy ! Component: 100 - total flux cleaned = -0.0145167 Jy ! Component: 150 - total flux cleaned = -0.0152581 Jy ! Component: 200 - total flux cleaned = -0.0156232 Jy ! Total flux subtracted in 200 components = -0.0156232 Jy ! Clean residual min=-0.004292 max=0.004620 Jy/beam ! Clean residual mean=0.000005 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.812493 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 46 components and 0.812493 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059846Jy sigma=0.406206 ! Fit after self-cal, rms=0.059622Jy sigma=0.404511 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059622Jy sigma=0.404511 ! Fit after self-cal, rms=0.056646Jy sigma=0.385528 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8639 mas, bmaj=1.068 mas, bpa=-10.73 degrees ! Estimated noise=1.17343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124713 Jy ! Component: 100 - total flux cleaned = -0.00148933 Jy ! Component: 150 - total flux cleaned = -0.00183736 Jy ! Component: 200 - total flux cleaned = -0.00202064 Jy ! Total flux subtracted in 200 components = -0.00202064 Jy ! Clean residual min=-0.002721 max=0.002936 Jy/beam ! Clean residual mean=-0.000000 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.810472 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.810472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056393Jy sigma=0.383866 ! Fit after self-cal, rms=0.056373Jy sigma=0.383746 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150325 Jy ! Component: 100 - total flux cleaned = 0.000926993 Jy ! Component: 150 - total flux cleaned = 0.000564879 Jy ! Component: 200 - total flux cleaned = 0.000351278 Jy ! Total flux subtracted in 200 components = 0.000351278 Jy ! Clean residual min=-0.002627 max=0.002657 Jy/beam ! Clean residual mean=0.000000 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.810824 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 0.810824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056172Jy sigma=0.382549 ! Fit after self-cal, rms=0.056151Jy sigma=0.382413 ! Inverting map ! Added new window around map position (-9.4, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198694 Jy ! Component: 100 - total flux cleaned = 0.00199718 Jy ! Component: 150 - total flux cleaned = 0.00194498 Jy ! Component: 200 - total flux cleaned = 0.00199295 Jy ! Total flux subtracted in 200 components = 0.00199295 Jy ! Clean residual min=-0.002363 max=0.002204 Jy/beam ! Clean residual mean=-0.000000 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.812817 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.812817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056008Jy sigma=0.381553 ! Fit after self-cal, rms=0.056004Jy sigma=0.381521 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056004Jy sigma=0.381521 ! Fit after self-cal, rms=0.055857Jy sigma=0.380938 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8621 mas, bmaj=1.068 mas, bpa=-10.71 degrees ! Estimated noise=1.17272 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000542404 Jy ! Component: 100 - total flux cleaned = 0.000597294 Jy ! Component: 150 - total flux cleaned = 0.000646167 Jy ! Component: 200 - total flux cleaned = 0.000645055 Jy ! Total flux subtracted in 200 components = 0.000645055 Jy ! Clean residual min=-0.002136 max=0.002189 Jy/beam ! Clean residual mean=-0.000000 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.813462 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 79 components and 0.813462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055760Jy sigma=0.380302 ! Fit after self-cal, rms=0.055754Jy sigma=0.380263 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (50.4, -7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000900404 Jy ! Component: 100 - total flux cleaned = 0.0011588 Jy ! Component: 150 - total flux cleaned = 0.00132404 Jy ! Component: 200 - total flux cleaned = 0.0014397 Jy ! Total flux subtracted in 200 components = 0.0014397 Jy ! Clean residual min=-0.002045 max=0.001932 Jy/beam ! Clean residual mean=-0.000000 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.814901 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 88 components and 0.814901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055661Jy sigma=0.379594 ! Fit after self-cal, rms=0.055654Jy sigma=0.379563 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055654Jy sigma=0.379563 ! Fit after self-cal, rms=0.055608Jy sigma=0.379436 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.077 mas, bmaj=2.191 mas, bpa=-1.708 degrees ! Estimated noise=1.73874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013457 Jy ! Component: 100 - total flux cleaned = 0.000714688 Jy ! Component: 150 - total flux cleaned = 0.00107184 Jy ! Component: 200 - total flux cleaned = 0.00139565 Jy ! Total flux subtracted in 200 components = 0.00139565 Jy ! Clean residual min=-0.001988 max=0.001790 Jy/beam ! Clean residual mean=-0.000002 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.816297 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.816297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055589Jy sigma=0.379298 ! Fit after self-cal, rms=0.055586Jy sigma=0.379281 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191569 Jy ! Component: 100 - total flux cleaned = 0.000345265 Jy ! Component: 150 - total flux cleaned = 0.000482143 Jy ! Component: 200 - total flux cleaned = 0.000587196 Jy ! Total flux subtracted in 200 components = 0.000587196 Jy ! Clean residual min=-0.001937 max=0.001742 Jy/beam ! Clean residual mean=-0.000002 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.816884 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 106 components and 0.816884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055579Jy sigma=0.379234 ! Fit after self-cal, rms=0.055577Jy sigma=0.379227 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8609 mas, bmaj=1.068 mas, bpa=-10.7 degrees ! Estimated noise=1.1724 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8609 x 1.068 at -10.7 degrees (North through East) ! Clean map min=-0.0015903 max=0.61062 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055577Jy sigma=0.379227 ! Fit after self-cal, rms=0.051919Jy sigma=0.348416 ! Inverting map and beam ! Estimated beam: bmin=0.8601 mas, bmaj=1.068 mas, bpa=-10.8 degrees ! Estimated noise=1.17212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000802528 Jy ! Component: 100 - total flux cleaned = 0.00109375 Jy ! Component: 150 - total flux cleaned = 0.00113122 Jy ! Component: 200 - total flux cleaned = 0.00106022 Jy ! Total flux subtracted in 200 components = 0.00106022 Jy ! Clean residual min=-0.001759 max=0.001837 Jy/beam ! Clean residual mean=-0.000001 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.817944 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 0.817944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051861Jy sigma=0.348031 ! Fit after self-cal, rms=0.051859Jy sigma=0.348026 ! Inverting map ! Added new window around map position (23.4, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100118 Jy ! Component: 100 - total flux cleaned = 0.00120283 Jy ! Component: 150 - total flux cleaned = 0.00134612 Jy ! Component: 200 - total flux cleaned = 0.00137932 Jy ! Total flux subtracted in 200 components = 0.00137932 Jy ! Clean residual min=-0.001709 max=0.001763 Jy/beam ! Clean residual mean=-0.000001 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.819324 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 126 components and 0.819324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051793Jy sigma=0.347535 ! Fit after self-cal, rms=0.051789Jy sigma=0.347511 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051789Jy sigma=0.347511 ! Fit after self-cal, rms=0.051781Jy sigma=0.347448 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7089 mas, bmaj=0.8985 mas, bpa=-9.626 degrees ! Estimated noise=1.62732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.459858 Jy ! Component: 100 - total flux cleaned = 0.631951 Jy ! Component: 150 - total flux cleaned = 0.713147 Jy ! Component: 200 - total flux cleaned = 0.75357 Jy ! Total flux subtracted in 200 components = 0.75357 Jy ! Clean residual min=-0.007448 max=0.019169 Jy/beam ! Clean residual mean=-0.000007 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 0.75357 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.75357 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8597 mas, bmaj=1.068 mas, bpa=-10.77 degrees ! Estimated noise=1.17231 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268172 Jy ! Component: 100 - total flux cleaned = 0.0408068 Jy ! Component: 150 - total flux cleaned = 0.0489761 Jy ! Component: 200 - total flux cleaned = 0.0538963 Jy ! Total flux subtracted in 200 components = 0.0538963 Jy ! Clean residual min=-0.002675 max=0.002864 Jy/beam ! Clean residual mean=-0.000001 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.807467 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 24 components and 0.807467 Jy ! Inverting map ! Added new window around map position (-9.2, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360029 Jy ! Component: 100 - total flux cleaned = 0.00625982 Jy ! Component: 150 - total flux cleaned = 0.00781344 Jy ! Component: 200 - total flux cleaned = 0.00877118 Jy ! Total flux subtracted in 200 components = 0.00877118 Jy ! Clean residual min=-0.002267 max=0.002421 Jy/beam ! Clean residual mean=-0.000001 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.816238 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 40 components and 0.816238 Jy ! Inverting map ! Added new window around map position (-3, -2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145613 Jy ! Component: 100 - total flux cleaned = 0.00161078 Jy ! Component: 150 - total flux cleaned = 0.00175821 Jy ! Component: 200 - total flux cleaned = 0.00189878 Jy ! Total flux subtracted in 200 components = 0.00189878 Jy ! Clean residual min=-0.001998 max=0.002233 Jy/beam ! Clean residual mean=-0.000001 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.818137 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 55 components and 0.818137 Jy ! Inverting map ! Added new window around map position (15.8, 10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159332 Jy ! Component: 100 - total flux cleaned = 0.00185625 Jy ! Component: 150 - total flux cleaned = 0.00204601 Jy ! Component: 200 - total flux cleaned = 0.00210809 Jy ! Total flux subtracted in 200 components = 0.00210809 Jy ! Clean residual min=-0.001867 max=0.001959 Jy/beam ! Clean residual mean=-0.000000 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.820245 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 65 components and 0.820245 Jy ! Inverting map ! Added new window around map position (2.2, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139443 Jy ! Component: 100 - total flux cleaned = 0.00156876 Jy ! Component: 150 - total flux cleaned = 0.00162439 Jy ! Component: 200 - total flux cleaned = 0.00167737 Jy ! Total flux subtracted in 200 components = 0.00167737 Jy ! Clean residual min=-0.001743 max=0.001861 Jy/beam ! Clean residual mean=-0.000000 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.821922 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 83 components and 0.821922 Jy ! Inverting map ! Added new window around map position (-42.8, -41.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000893334 Jy ! Component: 100 - total flux cleaned = 0.000993509 Jy ! Component: 150 - total flux cleaned = 0.000896948 Jy ! Component: 200 - total flux cleaned = 0.000897868 Jy ! Total flux subtracted in 200 components = 0.000897868 Jy ! Clean residual min=-0.001732 max=0.001812 Jy/beam ! Clean residual mean=-0.000000 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.82282 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 93 components and 0.822821 Jy ! Inverting map ! Added new window around map position (26.2, 40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000840939 Jy ! Component: 100 - total flux cleaned = 0.000983526 Jy ! Component: 150 - total flux cleaned = 0.000848573 Jy ! Component: 200 - total flux cleaned = 0.000631811 Jy ! Total flux subtracted in 200 components = 0.000631811 Jy ! Clean residual min=-0.001657 max=0.001730 Jy/beam ! Clean residual mean=-0.000000 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.823452 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 105 components and 0.823452 Jy ! Inverting map ! Added new window around map position (11.2, 49.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000657714 Jy ! Component: 100 - total flux cleaned = 0.000703221 Jy ! Component: 150 - total flux cleaned = 0.000828596 Jy ! Component: 200 - total flux cleaned = 0.000706291 Jy ! Total flux subtracted in 200 components = 0.000706291 Jy ! Clean residual min=-0.001614 max=0.001761 Jy/beam ! Clean residual mean=-0.000000 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.824159 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 114 components and 0.824159 Jy ! Inverting map ! Added new window around map position (-13, 18.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111806 Jy ! Component: 100 - total flux cleaned = 0.00150631 Jy ! Component: 150 - total flux cleaned = 0.00183528 Jy ! Component: 200 - total flux cleaned = 0.0023064 Jy ! Total flux subtracted in 200 components = 0.0023064 Jy ! Clean residual min=-0.001683 max=0.001654 Jy/beam ! Clean residual mean=0.000000 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.826465 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 132 components and 0.826465 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.076 mas, bmaj=2.191 mas, bpa=-1.652 degrees ! Estimated noise=1.74081 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210428 Jy ! Component: 100 - total flux cleaned = 6.24592e-05 Jy ! Component: 150 - total flux cleaned = 0.000125677 Jy ! Component: 200 - total flux cleaned = 1.46555e-05 Jy ! Total flux subtracted in 200 components = 1.46555e-05 Jy ! Clean residual min=-0.001650 max=0.001547 Jy/beam ! Clean residual mean=0.000000 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.82648 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000101983 Jy ! Component: 100 - total flux cleaned = -0.000150567 Jy ! Component: 150 - total flux cleaned = -0.000266617 Jy ! Component: 200 - total flux cleaned = -0.000354487 Jy ! Total flux subtracted in 200 components = -0.000354487 Jy ! Clean residual min=-0.001559 max=0.001533 Jy/beam ! Clean residual mean=0.000000 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.826125 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 164 components and 0.826125 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8597 mas, bmaj=1.068 mas, bpa=-10.77 degrees ! Estimated noise=1.17231 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00031532 Jy ! Component: 100 - total flux cleaned = 0.000353814 Jy ! Component: 150 - total flux cleaned = 0.000427101 Jy ! Component: 200 - total flux cleaned = 0.000426471 Jy ! Total flux subtracted in 200 components = 0.000426471 Jy ! Clean residual min=-0.001662 max=0.001591 Jy/beam ! Clean residual mean=0.000000 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.826552 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 176 components and 0.826552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.051572Jy sigma=0.345988 ! Fit after self-cal, rms=0.051539Jy sigma=0.345798 wmodel J2230+6946_X_g_map.mod ! Writing 176 model components to file: J2230+6946_X_g_map.mod wobs J2230+6946_X_g_uvs.fits ! Writing UV FITS file: J2230+6946_X_g_uvs.fits wwins J2230+6946_X_g_map.win ! wwins: Wrote 14 windows to J2230+6946_X_g_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.51254e-05 Jy ! Component: 100 - total flux cleaned = 8.56846e-05 Jy ! Component: 150 - total flux cleaned = 8.53483e-05 Jy ! Component: 200 - total flux cleaned = 0.000138679 Jy ! Component: 250 - total flux cleaned = 0.000164693 Jy ! Component: 300 - total flux cleaned = 0.000165195 Jy ! Component: 350 - total flux cleaned = 0.000214612 Jy ! Component: 400 - total flux cleaned = 0.000311004 Jy ! Component: 450 - total flux cleaned = 0.000287228 Jy ! Component: 500 - total flux cleaned = 0.000334785 Jy ! Component: 550 - total flux cleaned = 0.000474088 Jy ! Component: 600 - total flux cleaned = 0.000542858 Jy ! Component: 650 - total flux cleaned = 0.000566097 Jy ! Component: 700 - total flux cleaned = 0.000745133 Jy ! Component: 750 - total flux cleaned = 0.000811335 Jy ! Component: 800 - total flux cleaned = 0.000898746 Jy ! Component: 850 - total flux cleaned = 0.000985283 Jy ! Component: 900 - total flux cleaned = 0.00102833 Jy ! Component: 950 - total flux cleaned = 0.00107106 Jy ! Component: 1000 - total flux cleaned = 0.0011557 Jy ! Component: 1050 - total flux cleaned = 0.00119733 Jy ! Component: 1100 - total flux cleaned = 0.00123879 Jy ! Component: 1150 - total flux cleaned = 0.00136177 Jy ! Component: 1200 - total flux cleaned = 0.00146317 Jy ! Component: 1250 - total flux cleaned = 0.00150343 Jy ! Component: 1300 - total flux cleaned = 0.00154342 Jy ! Component: 1350 - total flux cleaned = 0.00154351 Jy ! Component: 1400 - total flux cleaned = 0.00154395 Jy ! Component: 1450 - total flux cleaned = 0.00164193 Jy ! Component: 1500 - total flux cleaned = 0.00168086 Jy ! Component: 1550 - total flux cleaned = 0.00171937 Jy ! Component: 1600 - total flux cleaned = 0.00179579 Jy ! Component: 1650 - total flux cleaned = 0.00183379 Jy ! Component: 1700 - total flux cleaned = 0.00190913 Jy ! Component: 1750 - total flux cleaned = 0.00185298 Jy ! Component: 1800 - total flux cleaned = 0.00189035 Jy ! Component: 1850 - total flux cleaned = 0.00194568 Jy ! Component: 1900 - total flux cleaned = 0.00190893 Jy ! Component: 1950 - total flux cleaned = 0.00185412 Jy ! Component: 2000 - total flux cleaned = 0.00205399 Jy ! Component: 2050 - total flux cleaned = 0.00201796 Jy ! Component: 2100 - total flux cleaned = 0.00203602 Jy ! Component: 2150 - total flux cleaned = 0.00210724 Jy ! Component: 2200 - total flux cleaned = 0.0020541 Jy ! Component: 2250 - total flux cleaned = 0.00215975 Jy ! Component: 2300 - total flux cleaned = 0.00214209 Jy ! Component: 2350 - total flux cleaned = 0.00210757 Jy ! Component: 2400 - total flux cleaned = 0.00214231 Jy ! Component: 2450 - total flux cleaned = 0.00217672 Jy ! Component: 2500 - total flux cleaned = 0.00227934 Jy ! Component: 2550 - total flux cleaned = 0.00227944 Jy ! Component: 2600 - total flux cleaned = 0.00229668 Jy ! Component: 2650 - total flux cleaned = 0.00234733 Jy ! Component: 2700 - total flux cleaned = 0.00241439 Jy ! Component: 2750 - total flux cleaned = 0.0024811 Jy ! Component: 2800 - total flux cleaned = 0.00249758 Jy ! Component: 2850 - total flux cleaned = 0.00259645 Jy ! Component: 2900 - total flux cleaned = 0.00264562 Jy ! Component: 2950 - total flux cleaned = 0.00266193 Jy ! Component: 3000 - total flux cleaned = 0.00274291 Jy ! Component: 3050 - total flux cleaned = 0.00272689 Jy ! Component: 3100 - total flux cleaned = 0.00282315 Jy ! Component: 3150 - total flux cleaned = 0.00287097 Jy ! Component: 3200 - total flux cleaned = 0.00287088 Jy ! Component: 3250 - total flux cleaned = 0.00288664 Jy ! Component: 3300 - total flux cleaned = 0.00285516 Jy ! Component: 3350 - total flux cleaned = 0.00298042 Jy ! Component: 3400 - total flux cleaned = 0.00302714 Jy ! Component: 3450 - total flux cleaned = 0.00308914 Jy ! Component: 3500 - total flux cleaned = 0.00316641 Jy ! Component: 3550 - total flux cleaned = 0.00315105 Jy ! Component: 3600 - total flux cleaned = 0.00327321 Jy ! Component: 3650 - total flux cleaned = 0.0033188 Jy ! Component: 3700 - total flux cleaned = 0.00333392 Jy ! Component: 3750 - total flux cleaned = 0.00336395 Jy ! Component: 3800 - total flux cleaned = 0.00334889 Jy ! Component: 3850 - total flux cleaned = 0.00339366 Jy ! Component: 3900 - total flux cleaned = 0.00348283 Jy ! Component: 3950 - total flux cleaned = 0.00354202 Jy ! Component: 4000 - total flux cleaned = 0.003483 Jy ! Component: 4050 - total flux cleaned = 0.00357095 Jy ! Total flux subtracted in 4096 components = 0.00362924 Jy ! Clean residual min=-0.000902 max=0.000950 Jy/beam ! Clean residual mean=0.000000 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.830181 Jy keep ! Adding 334 model components to the UV plane model. ! The established model now contains 510 components and 0.830181 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2230+6946_X_g_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8597 x 1.068 at -10.77 degrees (North through East) ! Clean map min=-0.0013876 max=0.61103 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2230+6946_X_g_map.fits wmodel /image_prod/ug002_uva//J2230+6946_X_g_map.mod ! Writing 510 model components to file: /image_prod/ug002_uva//J2230+6946_X_g_map.mod wobs /image_prod/ug002_uva//J2230+6946_X_g_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2230+6946_X_g_uvs.fits wwins /image_prod/ug002_uva//J2230+6946_X_g_map.win ! wwins: Wrote 15 windows to /image_prod/ug002_uva//J2230+6946_X_g_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.611027 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00023864 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.117167 0.117167 0.234334 0.468667 0.937334 1.87467 3.74934 7.49867 14.9973 29.9947 59.9894 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.611 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2560.45 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2230+6946_X_g_dfm.log closed on Thu Mar 5 05:45:57 2020