! Started logfile: /image_prod/ug002_uva//J2230+6946_X_d_dfm.log on Thu Mar 5 05:45:35 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2230+6946_X_d_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2230+6946_X_d_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.816049 visibilities/baseline/integration-bin. ! Found source: J2230+6946 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7932 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2230+6946_X_d] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.225222Jy sigma=8.199042 ! Fit after self-cal, rms=0.394010Jy sigma=2.889200 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7357 mas, bmaj=0.9406 mas, bpa=-0.1179 degrees ! Estimated noise=1.69751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.466085 Jy ! Component: 100 - total flux cleaned = 0.63744 Jy ! Total flux subtracted in 100 components = 0.63744 Jy ! Clean residual min=-0.023916 max=0.077168 Jy/beam ! Clean residual mean=0.000036 rms=0.005912 Jy/beam ! Combined flux in latest and established models = 0.63744 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.63744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174302Jy sigma=1.106032 ! Fit after self-cal, rms=0.173542Jy sigma=1.101078 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869517 Jy ! Component: 100 - total flux cleaned = 0.134147 Jy ! Total flux subtracted in 100 components = 0.134147 Jy ! Clean residual min=-0.016460 max=0.022956 Jy/beam ! Clean residual mean=0.000030 rms=0.003445 Jy/beam ! Combined flux in latest and established models = 0.771587 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 9 components and 0.771587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107488Jy sigma=0.688619 ! Fit after self-cal, rms=0.107275Jy sigma=0.687349 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265011 Jy ! Component: 100 - total flux cleaned = 0.0418823 Jy ! Total flux subtracted in 100 components = 0.0418823 Jy ! Clean residual min=-0.014374 max=0.018432 Jy/beam ! Clean residual mean=0.000029 rms=0.003104 Jy/beam ! Combined flux in latest and established models = 0.813469 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.813469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098714Jy sigma=0.640131 ! Fit after self-cal, rms=0.098688Jy sigma=0.640006 ! Inverting map ! Added new window around map position (1.4, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183084 Jy ! Component: 100 - total flux cleaned = 0.0279739 Jy ! Total flux subtracted in 100 components = 0.0279739 Jy ! Clean residual min=-0.013167 max=0.017508 Jy/beam ! Clean residual mean=0.000026 rms=0.002918 Jy/beam ! Combined flux in latest and established models = 0.841443 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.841443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094365Jy sigma=0.613088 ! Fit after self-cal, rms=0.094019Jy sigma=0.610630 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8916 mas, bmaj=1.168 mas, bpa=-2.562 degrees ! Estimated noise=1.19689 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115011 Jy ! Component: 100 - total flux cleaned = 0.0178639 Jy ! Component: 150 - total flux cleaned = 0.0214079 Jy ! Component: 200 - total flux cleaned = 0.0223734 Jy ! Total flux subtracted in 200 components = 0.0223734 Jy ! Clean residual min=-0.012943 max=0.016322 Jy/beam ! Clean residual mean=0.000084 rms=0.003192 Jy/beam ! Combined flux in latest and established models = 0.863816 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 0.863816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092409Jy sigma=0.601031 ! Fit after self-cal, rms=0.092270Jy sigma=0.600016 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8916 x 1.168 at -2.562 degrees (North through East) ! Clean map min=-0.011971 max=0.6275 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.94 KP 1.06 ! LA 0.97 MK 1.04 NL 1.14 OV 1.01 ! PT 0.89 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 0.95 KP 1.06 ! LA 0.96 MK 1.06 NL 1.16 OV 1.01 ! PT 0.89 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 0.96 KP 1.05 ! LA 0.98 MK 1.01 NL 1.14 OV 1.01 ! PT 0.90 SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 HN 0.93 KP 1.05 ! LA 0.98 MK 1.06 NL 1.15 OV 1.02 ! PT 0.89 SC 0.92 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 0.97 KP 1.06 ! LA 0.99 MK 1.06 NL 1.15 OV 1.02 ! PT 0.90 SC 0.94 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.97 KP 1.06 ! LA 0.99 MK 1.06 NL 1.16 OV 1.00 ! PT 0.92 SC 0.88 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.98 KP 1.06 ! LA 0.98 MK 1.07 NL 1.16 OV 1.01 ! PT 0.90 SC 0.95 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.96 KP 1.05 ! LA 0.99 MK 1.07 NL 1.16 OV 1.02 ! PT 0.89 SC 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.99 KP 1.07 ! LA 0.98 MK 1.07 NL 1.14 OV 1.03 ! PT 0.90 SC 0.93 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 0.99 KP 1.05 ! LA 0.98 MK 1.07 NL 1.18 OV 1.04 ! PT 0.90 SC 0.93 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.99 KP 1.07 ! LA 0.99 MK 1.09 NL 1.15 OV 1.04 ! PT 0.91 SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.01 KP 1.07 ! LA 0.99 MK 1.10 NL 1.16 OV 1.06 ! PT 0.88 SC 0.95 ! ! ! Fit before self-cal, rms=0.092270Jy sigma=0.600016 ! Fit after self-cal, rms=0.062872Jy sigma=0.419496 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8938 mas, bmaj=1.17 mas, bpa=-1.366 degrees ! Estimated noise=1.19904 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0105464 Jy ! Component: 100 - total flux cleaned = -0.0118949 Jy ! Component: 150 - total flux cleaned = -0.012709 Jy ! Component: 200 - total flux cleaned = -0.0132352 Jy ! Total flux subtracted in 200 components = -0.0132352 Jy ! Clean residual min=-0.004305 max=0.005067 Jy/beam ! Clean residual mean=-0.000015 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.850581 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.850581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061018Jy sigma=0.406230 ! Fit after self-cal, rms=0.060823Jy sigma=0.404962 ! Inverting map ! Added new window around map position (-1.8, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105904 Jy ! Component: 100 - total flux cleaned = 0.00054889 Jy ! Component: 150 - total flux cleaned = 0.000332871 Jy ! Component: 200 - total flux cleaned = 0.000134313 Jy ! Total flux subtracted in 200 components = 0.000134313 Jy ! Clean residual min=-0.003993 max=0.003991 Jy/beam ! Clean residual mean=-0.000015 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.850715 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.850715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060336Jy sigma=0.401056 ! Fit after self-cal, rms=0.060301Jy sigma=0.400846 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060301Jy sigma=0.400846 ! Fit after self-cal, rms=0.057302Jy sigma=0.385260 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8911 mas, bmaj=1.171 mas, bpa=-1.676 degrees ! Estimated noise=1.19732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0019211 Jy ! Component: 100 - total flux cleaned = -0.00347367 Jy ! Component: 150 - total flux cleaned = -0.00444948 Jy ! Component: 200 - total flux cleaned = -0.00497104 Jy ! Total flux subtracted in 200 components = -0.00497104 Jy ! Clean residual min=-0.002690 max=0.002787 Jy/beam ! Clean residual mean=-0.000015 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.845744 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.845744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056941Jy sigma=0.382562 ! Fit after self-cal, rms=0.056906Jy sigma=0.382375 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108896 Jy ! Component: 100 - total flux cleaned = 0.000520422 Jy ! Component: 150 - total flux cleaned = 0.000149474 Jy ! Component: 200 - total flux cleaned = 3.47941e-05 Jy ! Total flux subtracted in 200 components = 3.47941e-05 Jy ! Clean residual min=-0.002592 max=0.002798 Jy/beam ! Clean residual mean=-0.000013 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.845779 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.845779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056750Jy sigma=0.381138 ! Fit after self-cal, rms=0.056738Jy sigma=0.381084 ! Inverting map ! Added new window around map position (-2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195394 Jy ! Component: 100 - total flux cleaned = 0.00194921 Jy ! Component: 150 - total flux cleaned = 0.00208878 Jy ! Component: 200 - total flux cleaned = 0.00202305 Jy ! Total flux subtracted in 200 components = 0.00202305 Jy ! Clean residual min=-0.002472 max=0.002434 Jy/beam ! Clean residual mean=-0.000013 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.847802 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 0.847802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056526Jy sigma=0.379679 ! Fit after self-cal, rms=0.056514Jy sigma=0.379631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056514Jy sigma=0.379631 ! Fit after self-cal, rms=0.056463Jy sigma=0.379371 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.89 mas, bmaj=1.171 mas, bpa=-1.675 degrees ! Estimated noise=1.19721 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000283645 Jy ! Component: 100 - total flux cleaned = -0.000410678 Jy ! Component: 150 - total flux cleaned = -0.000358048 Jy ! Component: 200 - total flux cleaned = -0.000405953 Jy ! Total flux subtracted in 200 components = -0.000405953 Jy ! Clean residual min=-0.002357 max=0.002188 Jy/beam ! Clean residual mean=-0.000012 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.847396 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 87 components and 0.847396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056356Jy sigma=0.378567 ! Fit after self-cal, rms=0.056347Jy sigma=0.378529 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103463 Jy ! Component: 100 - total flux cleaned = -0.00010297 Jy ! Component: 150 - total flux cleaned = -0.00018832 Jy ! Component: 200 - total flux cleaned = -0.000187695 Jy ! Total flux subtracted in 200 components = -0.000187695 Jy ! Clean residual min=-0.002271 max=0.002113 Jy/beam ! Clean residual mean=-0.000012 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.847209 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 92 components and 0.847209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056289Jy sigma=0.378086 ! Fit after self-cal, rms=0.056286Jy sigma=0.378071 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056286Jy sigma=0.378071 ! Fit after self-cal, rms=0.056281Jy sigma=0.378004 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.149 mas, bmaj=2.384 mas, bpa=8.249 degrees ! Estimated noise=1.75191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231259 Jy ! Component: 100 - total flux cleaned = -0.000478641 Jy ! Component: 150 - total flux cleaned = -0.000675249 Jy ! Component: 200 - total flux cleaned = -0.000832988 Jy ! Total flux subtracted in 200 components = -0.000832988 Jy ! Clean residual min=-0.002274 max=0.002293 Jy/beam ! Clean residual mean=-0.000030 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.846376 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 103 components and 0.846376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056265Jy sigma=0.377944 ! Fit after self-cal, rms=0.056265Jy sigma=0.377931 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.56295e-05 Jy ! Component: 100 - total flux cleaned = -0.000210646 Jy ! Component: 150 - total flux cleaned = -0.00034822 Jy ! Component: 200 - total flux cleaned = -0.000442773 Jy ! Total flux subtracted in 200 components = -0.000442773 Jy ! Clean residual min=-0.002270 max=0.002225 Jy/beam ! Clean residual mean=-0.000029 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.845933 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 112 components and 0.845933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056259Jy sigma=0.377915 ! Fit after self-cal, rms=0.056260Jy sigma=0.377908 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8894 mas, bmaj=1.171 mas, bpa=-1.661 degrees ! Estimated noise=1.19742 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8894 x 1.171 at -1.661 degrees (North through East) ! Clean map min=-0.0019352 max=0.6296 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056260Jy sigma=0.377908 ! Fit after self-cal, rms=0.053351Jy sigma=0.353643 ! Inverting map and beam ! Estimated beam: bmin=0.8892 mas, bmaj=1.17 mas, bpa=-1.763 degrees ! Estimated noise=1.19773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133008 Jy ! Component: 100 - total flux cleaned = 4.36498e-05 Jy ! Component: 150 - total flux cleaned = 1.69725e-06 Jy ! Component: 200 - total flux cleaned = -3.73297e-05 Jy ! Total flux subtracted in 200 components = -3.73297e-05 Jy ! Clean residual min=-0.002100 max=0.001899 Jy/beam ! Clean residual mean=-0.000008 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.845896 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 118 components and 0.845896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053291Jy sigma=0.353206 ! Fit after self-cal, rms=0.053288Jy sigma=0.353195 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.66222e-06 Jy ! Component: 100 - total flux cleaned = -7.11413e-05 Jy ! Component: 150 - total flux cleaned = -0.000140251 Jy ! Component: 200 - total flux cleaned = -0.000239499 Jy ! Total flux subtracted in 200 components = -0.000239499 Jy ! Clean residual min=-0.002013 max=0.001871 Jy/beam ! Clean residual mean=-0.000008 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.845656 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 121 components and 0.845656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053251Jy sigma=0.352907 ! Fit after self-cal, rms=0.053250Jy sigma=0.352897 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053250Jy sigma=0.352897 ! Fit after self-cal, rms=0.053270Jy sigma=0.352860 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7352 mas, bmaj=0.9452 mas, bpa=1.2 degrees ! Estimated noise=1.69965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.466594 Jy ! Component: 100 - total flux cleaned = 0.638396 Jy ! Component: 150 - total flux cleaned = 0.725427 Jy ! Component: 200 - total flux cleaned = 0.773449 Jy ! Total flux subtracted in 200 components = 0.773449 Jy ! Clean residual min=-0.009708 max=0.023185 Jy/beam ! Clean residual mean=0.000002 rms=0.001936 Jy/beam ! Combined flux in latest and established models = 0.773449 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.773449 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8889 mas, bmaj=1.171 mas, bpa=-1.694 degrees ! Estimated noise=1.19815 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322977 Jy ! Component: 100 - total flux cleaned = 0.0478343 Jy ! Component: 150 - total flux cleaned = 0.0567716 Jy ! Component: 200 - total flux cleaned = 0.062677 Jy ! Total flux subtracted in 200 components = 0.062677 Jy ! Clean residual min=-0.003276 max=0.003855 Jy/beam ! Clean residual mean=-0.000005 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.836125 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.836126 Jy ! Inverting map ! Added new window around map position (-0.4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330473 Jy ! Component: 100 - total flux cleaned = 0.00592262 Jy ! Component: 150 - total flux cleaned = 0.00680087 Jy ! Component: 200 - total flux cleaned = 0.00726465 Jy ! Total flux subtracted in 200 components = 0.00726465 Jy ! Clean residual min=-0.002416 max=0.002914 Jy/beam ! Clean residual mean=-0.000009 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.84339 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 0.84339 Jy ! Inverting map ! Added new window around map position (1.6, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012248 Jy ! Component: 100 - total flux cleaned = 0.00153411 Jy ! Component: 150 - total flux cleaned = 0.00182043 Jy ! Component: 200 - total flux cleaned = 0.00208655 Jy ! Total flux subtracted in 200 components = 0.00208655 Jy ! Clean residual min=-0.002126 max=0.002528 Jy/beam ! Clean residual mean=-0.000009 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.845477 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 47 components and 0.845477 Jy ! Inverting map ! Added new window around map position (-23, -26.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154624 Jy ! Component: 100 - total flux cleaned = 0.00171079 Jy ! Component: 150 - total flux cleaned = 0.00171042 Jy ! Component: 200 - total flux cleaned = 0.00171392 Jy ! Total flux subtracted in 200 components = 0.00171392 Jy ! Clean residual min=-0.002098 max=0.002366 Jy/beam ! Clean residual mean=-0.000007 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.847191 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 57 components and 0.847191 Jy ! Inverting map ! Added new window around map position (8.4, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169597 Jy ! Component: 100 - total flux cleaned = 0.00218527 Jy ! Component: 150 - total flux cleaned = 0.00238414 Jy ! Component: 200 - total flux cleaned = 0.00257649 Jy ! Total flux subtracted in 200 components = 0.00257649 Jy ! Clean residual min=-0.001923 max=0.002101 Jy/beam ! Clean residual mean=-0.000006 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.849767 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 68 components and 0.849767 Jy ! Inverting map ! Added new window around map position (-20.6, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155732 Jy ! Component: 100 - total flux cleaned = 0.00179989 Jy ! Component: 150 - total flux cleaned = 0.00191821 Jy ! Component: 200 - total flux cleaned = 0.00208516 Jy ! Total flux subtracted in 200 components = 0.00208516 Jy ! Clean residual min=-0.001847 max=0.001772 Jy/beam ! Clean residual mean=-0.000005 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.851852 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 76 components and 0.851852 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.149 mas, bmaj=2.385 mas, bpa=8.285 degrees ! Estimated noise=1.75356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000815698 Jy ! Component: 100 - total flux cleaned = 0.00131021 Jy ! Component: 150 - total flux cleaned = 0.00131426 Jy ! Component: 200 - total flux cleaned = 0.0013139 Jy ! Total flux subtracted in 200 components = 0.0013139 Jy ! Clean residual min=-0.001872 max=0.001837 Jy/beam ! Clean residual mean=-0.000011 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.853166 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.50083e-05 Jy ! Component: 100 - total flux cleaned = 0.000107096 Jy ! Component: 150 - total flux cleaned = 0.0002253 Jy ! Component: 200 - total flux cleaned = 0.000313462 Jy ! Total flux subtracted in 200 components = 0.000313462 Jy ! Clean residual min=-0.001886 max=0.001838 Jy/beam ! Clean residual mean=-0.000011 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.85348 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 113 components and 0.85348 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8889 mas, bmaj=1.171 mas, bpa=-1.694 degrees ! Estimated noise=1.19815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000496855 Jy ! Component: 100 - total flux cleaned = -0.000497931 Jy ! Component: 150 - total flux cleaned = -0.000447028 Jy ! Component: 200 - total flux cleaned = -0.00039521 Jy ! Total flux subtracted in 200 components = -0.00039521 Jy ! Clean residual min=-0.001879 max=0.001701 Jy/beam ! Clean residual mean=-0.000003 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.853085 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 120 components and 0.853085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053172Jy sigma=0.352410 ! Fit after self-cal, rms=0.053147Jy sigma=0.352273 wmodel J2230+6946_X_d_map.mod ! Writing 120 model components to file: J2230+6946_X_d_map.mod wobs J2230+6946_X_d_uvs.fits ! Writing UV FITS file: J2230+6946_X_d_uvs.fits wwins J2230+6946_X_d_map.win ! wwins: Wrote 10 windows to J2230+6946_X_d_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00040522 Jy ! Component: 100 - total flux cleaned = -0.000593603 Jy ! Component: 150 - total flux cleaned = -0.000685407 Jy ! Component: 200 - total flux cleaned = -0.000744682 Jy ! Component: 250 - total flux cleaned = -0.000802302 Jy ! Component: 300 - total flux cleaned = -0.000859131 Jy ! Component: 350 - total flux cleaned = -0.000915142 Jy ! Component: 400 - total flux cleaned = -0.000942614 Jy ! Component: 450 - total flux cleaned = -0.00107687 Jy ! Component: 500 - total flux cleaned = -0.00102333 Jy ! Component: 550 - total flux cleaned = -0.00102302 Jy ! Component: 600 - total flux cleaned = -0.000945337 Jy ! Component: 650 - total flux cleaned = -0.000945619 Jy ! Component: 700 - total flux cleaned = -0.00104615 Jy ! Component: 750 - total flux cleaned = -0.000946099 Jy ! Component: 800 - total flux cleaned = -0.000946323 Jy ! Component: 850 - total flux cleaned = -0.00097007 Jy ! Component: 900 - total flux cleaned = -0.0008252 Jy ! Component: 950 - total flux cleaned = -0.000896581 Jy ! Component: 1000 - total flux cleaned = -0.000801961 Jy ! Component: 1050 - total flux cleaned = -0.000732067 Jy ! Component: 1100 - total flux cleaned = -0.000732371 Jy ! Component: 1150 - total flux cleaned = -0.000686615 Jy ! Component: 1200 - total flux cleaned = -0.000686592 Jy ! Component: 1250 - total flux cleaned = -0.000641311 Jy ! Component: 1300 - total flux cleaned = -0.000507114 Jy ! Component: 1350 - total flux cleaned = -0.000507334 Jy ! Component: 1400 - total flux cleaned = -0.000529429 Jy ! Component: 1450 - total flux cleaned = -0.000529389 Jy ! Component: 1500 - total flux cleaned = -0.000464016 Jy ! Component: 1550 - total flux cleaned = -0.000378263 Jy ! Component: 1600 - total flux cleaned = -0.000272042 Jy ! Component: 1650 - total flux cleaned = -0.00031454 Jy ! Component: 1700 - total flux cleaned = -0.000335581 Jy ! Component: 1750 - total flux cleaned = -0.000273258 Jy ! Component: 1800 - total flux cleaned = -0.000273226 Jy ! Component: 1850 - total flux cleaned = -0.000191472 Jy ! Component: 1900 - total flux cleaned = -9.00757e-05 Jy ! Component: 1950 - total flux cleaned = -7.02039e-05 Jy ! Component: 2000 - total flux cleaned = -0.000110335 Jy ! Component: 2050 - total flux cleaned = 8.67323e-06 Jy ! Component: 2100 - total flux cleaned = -3.07093e-05 Jy ! Component: 2150 - total flux cleaned = -5.05346e-05 Jy ! Component: 2200 - total flux cleaned = -1.17766e-05 Jy ! Component: 2250 - total flux cleaned = 6.54609e-05 Jy ! Component: 2300 - total flux cleaned = 8.46474e-05 Jy ! Component: 2350 - total flux cleaned = 0.000122737 Jy ! Component: 2400 - total flux cleaned = 0.000103802 Jy ! Component: 2450 - total flux cleaned = 8.49823e-05 Jy ! Component: 2500 - total flux cleaned = 0.000122437 Jy ! Component: 2550 - total flux cleaned = 0.000159591 Jy ! Component: 2600 - total flux cleaned = 0.000214853 Jy ! Component: 2650 - total flux cleaned = 0.000251535 Jy ! Component: 2700 - total flux cleaned = 0.000215148 Jy ! Component: 2750 - total flux cleaned = 0.000323672 Jy ! Component: 2800 - total flux cleaned = 0.000305631 Jy ! Component: 2850 - total flux cleaned = 0.000305566 Jy ! Component: 2900 - total flux cleaned = 0.000394399 Jy ! Component: 2950 - total flux cleaned = 0.000412046 Jy ! Component: 3000 - total flux cleaned = 0.000446965 Jy ! Component: 3050 - total flux cleaned = 0.000342134 Jy ! Component: 3100 - total flux cleaned = 0.000411536 Jy ! Component: 3150 - total flux cleaned = 0.000428894 Jy ! Component: 3200 - total flux cleaned = 0.000428877 Jy ! Component: 3250 - total flux cleaned = 0.000480102 Jy ! Component: 3300 - total flux cleaned = 0.000514044 Jy ! Component: 3350 - total flux cleaned = 0.000514074 Jy ! Component: 3400 - total flux cleaned = 0.00058101 Jy ! Component: 3450 - total flux cleaned = 0.000597536 Jy ! Component: 3500 - total flux cleaned = 0.000597449 Jy ! Component: 3550 - total flux cleaned = 0.000679944 Jy ! Component: 3600 - total flux cleaned = 0.000729253 Jy ! Component: 3650 - total flux cleaned = 0.000712909 Jy ! Component: 3700 - total flux cleaned = 0.00072911 Jy ! Component: 3750 - total flux cleaned = 0.000761458 Jy ! Component: 3800 - total flux cleaned = 0.000841964 Jy ! Component: 3850 - total flux cleaned = 0.000857903 Jy ! Component: 3900 - total flux cleaned = 0.000905659 Jy ! Component: 3950 - total flux cleaned = 0.00085809 Jy ! Component: 4000 - total flux cleaned = 0.000889711 Jy ! Component: 4050 - total flux cleaned = 0.000889727 Jy ! Total flux subtracted in 4096 components = 0.000983341 Jy ! Clean residual min=-0.000949 max=0.001128 Jy/beam ! Clean residual mean=-0.000002 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.854068 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 450 components and 0.854068 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2230+6946_X_d_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8889 x 1.171 at -1.694 degrees (North through East) ! Clean map min=-0.0015979 max=0.63047 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2230+6946_X_d_map.fits wmodel /image_prod/ug002_uva//J2230+6946_X_d_map.mod ! Writing 450 model components to file: /image_prod/ug002_uva//J2230+6946_X_d_map.mod wobs /image_prod/ug002_uva//J2230+6946_X_d_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2230+6946_X_d_uvs.fits wwins /image_prod/ug002_uva//J2230+6946_X_d_map.win ! wwins: Wrote 11 windows to /image_prod/ug002_uva//J2230+6946_X_d_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.630472 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000256646 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.122121 0.122121 0.244242 0.488483 0.976967 1.95393 3.90787 7.81573 15.6315 31.2629 62.5259 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.63 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2456.58 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2230+6946_X_d_dfm.log closed on Thu Mar 5 05:45:40 2020