! Started logfile: /image_prod/ug002_uva//J2229-0832_X_f_dfm.log on Thu Mar 5 05:43:40 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2229-0832_X_f_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2229-0832_X_f_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.890278 visibilities/baseline/integration-bin. ! Found source: J2229-0832 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7692 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2229-0832_X_f] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.391729Jy sigma=8.031501 ! Fit after self-cal, rms=1.206362Jy sigma=3.928062 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6344 mas, bmaj=1.631 mas, bpa=-3.221 degrees ! Estimated noise=3.23223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.5318 Jy ! Component: 100 - total flux cleaned = 1.9373 Jy ! Total flux subtracted in 100 components = 1.9373 Jy ! Clean residual min=-0.098768 max=0.173339 Jy/beam ! Clean residual mean=0.000049 rms=0.020659 Jy/beam ! Combined flux in latest and established models = 1.9373 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.9373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.456424Jy sigma=1.493157 ! Fit after self-cal, rms=0.456288Jy sigma=1.492813 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.186752 Jy ! Component: 100 - total flux cleaned = 0.29513 Jy ! Total flux subtracted in 100 components = 0.29513 Jy ! Clean residual min=-0.093684 max=0.120813 Jy/beam ! Clean residual mean=0.000025 rms=0.016838 Jy/beam ! Combined flux in latest and established models = 2.23243 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 2.23243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.332243Jy sigma=1.139764 ! Fit after self-cal, rms=0.332173Jy sigma=1.139684 ! Inverting map ! Added new window around map position (0.2, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608048 Jy ! Component: 100 - total flux cleaned = 0.0951868 Jy ! Total flux subtracted in 100 components = 0.0951868 Jy ! Clean residual min=-0.085736 max=0.100885 Jy/beam ! Clean residual mean=0.000015 rms=0.015178 Jy/beam ! Combined flux in latest and established models = 2.32762 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 2.32762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.302359Jy sigma=1.032536 ! Fit after self-cal, rms=0.300630Jy sigma=1.026007 ! Inverting map ! Added new window around map position (2, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265647 Jy ! Component: 100 - total flux cleaned = 0.0419645 Jy ! Total flux subtracted in 100 components = 0.0419645 Jy ! Clean residual min=-0.082056 max=0.091764 Jy/beam ! Clean residual mean=0.000013 rms=0.013452 Jy/beam ! Combined flux in latest and established models = 2.36958 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 2.36958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.273846Jy sigma=0.925321 ! Fit after self-cal, rms=0.271704Jy sigma=0.917891 ! Inverting map ! Added new window around map position (4.8, -20.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433007 Jy ! Component: 100 - total flux cleaned = 0.0696988 Jy ! Total flux subtracted in 100 components = 0.0696988 Jy ! Clean residual min=-0.076356 max=0.069503 Jy/beam ! Clean residual mean=0.000012 rms=0.011880 Jy/beam ! Combined flux in latest and established models = 2.43928 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 2.43928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.251004Jy sigma=0.840998 ! Fit after self-cal, rms=0.250123Jy sigma=0.837799 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7773 mas, bmaj=1.903 mas, bpa=-2.642 degrees ! Estimated noise=2.4609 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15, 26.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0525149 Jy ! Component: 100 - total flux cleaned = 0.0665268 Jy ! Component: 150 - total flux cleaned = 0.0740573 Jy ! Component: 200 - total flux cleaned = 0.0767216 Jy ! Total flux subtracted in 200 components = 0.0767216 Jy ! Clean residual min=-0.058252 max=0.053732 Jy/beam ! Clean residual mean=-0.000004 rms=0.010455 Jy/beam ! Combined flux in latest and established models = 2.516 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 69 components and 2.516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.224134Jy sigma=0.755560 ! Fit after self-cal, rms=0.223057Jy sigma=0.751162 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7773 x 1.903 at -2.642 degrees (North through East) ! Clean map min=-0.074018 max=2.0023 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.88 KP 1.01 ! LA 1.06 MK 1.06 NL 1.05 OV 0.96 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.91 KP 1.02 ! LA 1.07 MK 1.01 NL 1.04 OV 0.95 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.90 KP 1.02 ! LA 1.06 MK 1.06 NL 1.04 OV 0.95 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.91 KP 1.03 ! LA 1.05 MK 1.06 NL 1.04 OV 0.95 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.90 KP 1.03 ! LA 1.05 MK 1.04 NL 1.04 OV 0.96 ! PT 0.93 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.90 KP 1.03 ! LA 1.03 MK 1.06 NL 1.05 OV 0.96 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.89 KP 1.03 ! LA 1.04 MK 1.05 NL 1.06 OV 0.96 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.90 KP 1.02 ! LA 1.05 MK 1.04 NL 1.06 OV 0.96 ! PT 0.92 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.90 KP 1.02 ! LA 1.04 MK 1.07 NL 1.05 OV 0.95 ! PT 0.92 SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.90 KP 1.02 ! LA 1.05 MK 1.05 NL 1.05 OV 0.96 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.90 KP 1.04 ! LA 1.03 MK 1.03 NL 1.07 OV 0.95 ! PT 0.93 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.89 KP 1.03 ! LA 1.04 MK 1.05 NL 1.06 OV 0.94 ! PT 0.92 SC 1.01 ! ! ! Fit before self-cal, rms=0.223057Jy sigma=0.751162 ! Fit after self-cal, rms=0.161024Jy sigma=0.541806 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7821 mas, bmaj=1.919 mas, bpa=-2.546 degrees ! Estimated noise=2.46747 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0371811 Jy ! Component: 100 - total flux cleaned = -0.0609976 Jy ! Component: 150 - total flux cleaned = -0.0754555 Jy ! Component: 200 - total flux cleaned = -0.083383 Jy ! Total flux subtracted in 200 components = -0.083383 Jy ! Clean residual min=-0.031351 max=0.029762 Jy/beam ! Clean residual mean=0.000004 rms=0.006127 Jy/beam ! Combined flux in latest and established models = 2.43262 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 2.43262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.148074Jy sigma=0.500701 ! Fit after self-cal, rms=0.147346Jy sigma=0.498535 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.147346Jy sigma=0.498535 ! Fit after self-cal, rms=0.112918Jy sigma=0.362620 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.791 mas, bmaj=1.912 mas, bpa=-2.414 degrees ! Estimated noise=2.47713 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.022377 Jy ! Component: 100 - total flux cleaned = -0.0296491 Jy ! Component: 150 - total flux cleaned = -0.0340848 Jy ! Component: 200 - total flux cleaned = -0.0379111 Jy ! Total flux subtracted in 200 components = -0.0379111 Jy ! Clean residual min=-0.017754 max=0.020040 Jy/beam ! Clean residual mean=0.000005 rms=0.003997 Jy/beam ! Combined flux in latest and established models = 2.39471 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 99 components and 2.39471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105294Jy sigma=0.338297 ! Fit after self-cal, rms=0.104661Jy sigma=0.336608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, -10.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00986968 Jy ! Component: 100 - total flux cleaned = 0.0110123 Jy ! Component: 150 - total flux cleaned = 0.0129593 Jy ! Component: 200 - total flux cleaned = 0.0142533 Jy ! Total flux subtracted in 200 components = 0.0142533 Jy ! Clean residual min=-0.016231 max=0.016602 Jy/beam ! Clean residual mean=0.000005 rms=0.003616 Jy/beam ! Combined flux in latest and established models = 2.40896 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 109 components and 2.40896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098443Jy sigma=0.316036 ! Fit after self-cal, rms=0.098194Jy sigma=0.315371 ! Inverting map ! Added new window around map position (-5.8, 24.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148441 Jy ! Component: 100 - total flux cleaned = 0.0184891 Jy ! Component: 150 - total flux cleaned = 0.0199668 Jy ! Component: 200 - total flux cleaned = 0.020655 Jy ! Total flux subtracted in 200 components = 0.020655 Jy ! Clean residual min=-0.015263 max=0.014915 Jy/beam ! Clean residual mean=0.000004 rms=0.003358 Jy/beam ! Combined flux in latest and established models = 2.42962 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 2.42962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094455Jy sigma=0.304158 ! Fit after self-cal, rms=0.094314Jy sigma=0.303797 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094314Jy sigma=0.303797 ! Fit after self-cal, rms=0.091836Jy sigma=0.296734 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7913 mas, bmaj=1.911 mas, bpa=-2.406 degrees ! Estimated noise=2.47446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0112923 Jy ! Component: 100 - total flux cleaned = -0.0154205 Jy ! Component: 150 - total flux cleaned = -0.0161069 Jy ! Component: 200 - total flux cleaned = -0.0160929 Jy ! Total flux subtracted in 200 components = -0.0160929 Jy ! Clean residual min=-0.013364 max=0.013383 Jy/beam ! Clean residual mean=0.000004 rms=0.003014 Jy/beam ! Combined flux in latest and established models = 2.41352 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 131 components and 2.41352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088628Jy sigma=0.286318 ! Fit after self-cal, rms=0.088374Jy sigma=0.285726 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00306797 Jy ! Component: 100 - total flux cleaned = -0.00306813 Jy ! Component: 150 - total flux cleaned = -0.00306077 Jy ! Component: 200 - total flux cleaned = -0.00331061 Jy ! Total flux subtracted in 200 components = -0.00331061 Jy ! Clean residual min=-0.012596 max=0.013049 Jy/beam ! Clean residual mean=0.000004 rms=0.002919 Jy/beam ! Combined flux in latest and established models = 2.41021 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 139 components and 2.41021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086883Jy sigma=0.280860 ! Fit after self-cal, rms=0.086795Jy sigma=0.280700 ! Inverting map ! Added new window around map position (-7.6, 36.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00801324 Jy ! Component: 100 - total flux cleaned = 0.00856691 Jy ! Component: 150 - total flux cleaned = 0.00933133 Jy ! Component: 200 - total flux cleaned = 0.0110159 Jy ! Total flux subtracted in 200 components = 0.0110159 Jy ! Clean residual min=-0.011955 max=0.011820 Jy/beam ! Clean residual mean=0.000004 rms=0.002771 Jy/beam ! Combined flux in latest and established models = 2.42123 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 160 components and 2.42123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084597Jy sigma=0.273390 ! Fit after self-cal, rms=0.084464Jy sigma=0.273017 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084464Jy sigma=0.273017 ! Fit after self-cal, rms=0.083062Jy sigma=0.269479 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.002 mas, bmaj=3.496 mas, bpa=0.3548 degrees ! Estimated noise=3.57012 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00443831 Jy ! Component: 100 - total flux cleaned = -0.00345534 Jy ! Component: 150 - total flux cleaned = -0.00280736 Jy ! Component: 200 - total flux cleaned = -0.00139135 Jy ! Total flux subtracted in 200 components = -0.00139135 Jy ! Clean residual min=-0.014342 max=0.012944 Jy/beam ! Clean residual mean=0.000008 rms=0.003834 Jy/beam ! Combined flux in latest and established models = 2.41984 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 180 components and 2.41984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082400Jy sigma=0.267855 ! Fit after self-cal, rms=0.082324Jy sigma=0.267625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000286812 Jy ! Component: 100 - total flux cleaned = 0.000994809 Jy ! Component: 150 - total flux cleaned = 0.00132475 Jy ! Component: 200 - total flux cleaned = 0.00116973 Jy ! Total flux subtracted in 200 components = 0.00116973 Jy ! Clean residual min=-0.014448 max=0.012845 Jy/beam ! Clean residual mean=0.000007 rms=0.003738 Jy/beam ! Combined flux in latest and established models = 2.42101 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 192 components and 2.42101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082071Jy sigma=0.267077 ! Fit after self-cal, rms=0.082048Jy sigma=0.267031 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7913 mas, bmaj=1.909 mas, bpa=-2.396 degrees ! Estimated noise=2.47225 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7913 x 1.909 at -2.396 degrees (North through East) ! Clean map min=-0.041039 max=2.0172 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082048Jy sigma=0.267031 ! Fit after self-cal, rms=0.078953Jy sigma=0.252331 ! Inverting map and beam ! Estimated beam: bmin=0.7912 mas, bmaj=1.909 mas, bpa=-2.404 degrees ! Estimated noise=2.47018 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00464513 Jy ! Component: 100 - total flux cleaned = -0.00496768 Jy ! Component: 150 - total flux cleaned = -0.00472314 Jy ! Component: 200 - total flux cleaned = -0.0042548 Jy ! Total flux subtracted in 200 components = -0.0042548 Jy ! Clean residual min=-0.010611 max=0.011040 Jy/beam ! Clean residual mean=0.000004 rms=0.002390 Jy/beam ! Combined flux in latest and established models = 2.41675 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 198 components and 2.41675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077242Jy sigma=0.246266 ! Fit after self-cal, rms=0.077143Jy sigma=0.246121 ! Inverting map ! Added new window around map position (16.4, -30.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00887597 Jy ! Component: 100 - total flux cleaned = 0.00974915 Jy ! Component: 150 - total flux cleaned = 0.00998988 Jy ! Component: 200 - total flux cleaned = 0.0101959 Jy ! Total flux subtracted in 200 components = 0.0101959 Jy ! Clean residual min=-0.010019 max=0.009625 Jy/beam ! Clean residual mean=0.000003 rms=0.002251 Jy/beam ! Combined flux in latest and established models = 2.42695 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 218 components and 2.42695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075144Jy sigma=0.238941 ! Fit after self-cal, rms=0.074987Jy sigma=0.238512 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074987Jy sigma=0.238512 ! Fit after self-cal, rms=0.074382Jy sigma=0.237350 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6442 mas, bmaj=1.627 mas, bpa=-3.064 degrees ! Estimated noise=3.27029 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.54922 Jy ! Component: 100 - total flux cleaned = 1.93842 Jy ! Component: 150 - total flux cleaned = 2.10366 Jy ! Component: 200 - total flux cleaned = 2.19707 Jy ! Total flux subtracted in 200 components = 2.19707 Jy ! Clean residual min=-0.051917 max=0.060651 Jy/beam ! Clean residual mean=0.000022 rms=0.007991 Jy/beam ! Combined flux in latest and established models = 2.19707 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 2.19707 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7912 mas, bmaj=1.909 mas, bpa=-2.388 degrees ! Estimated noise=2.46865 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0835104 Jy ! Component: 100 - total flux cleaned = 0.120395 Jy ! Component: 150 - total flux cleaned = 0.139053 Jy ! Component: 200 - total flux cleaned = 0.148203 Jy ! Total flux subtracted in 200 components = 0.148203 Jy ! Clean residual min=-0.025202 max=0.028871 Jy/beam ! Clean residual mean=0.000009 rms=0.004505 Jy/beam ! Combined flux in latest and established models = 2.34527 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 45 components and 2.34527 Jy ! Inverting map ! Added new window around map position (-7.8, 6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166587 Jy ! Component: 100 - total flux cleaned = 0.0256125 Jy ! Component: 150 - total flux cleaned = 0.0309828 Jy ! Component: 200 - total flux cleaned = 0.0366843 Jy ! Total flux subtracted in 200 components = 0.0366843 Jy ! Clean residual min=-0.018144 max=0.023026 Jy/beam ! Clean residual mean=0.000005 rms=0.003726 Jy/beam ! Combined flux in latest and established models = 2.38196 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 61 components and 2.38196 Jy ! Inverting map ! Added new window around map position (-21.2, 31.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00800334 Jy ! Component: 100 - total flux cleaned = 0.00943674 Jy ! Component: 150 - total flux cleaned = 0.0120625 Jy ! Component: 200 - total flux cleaned = 0.014555 Jy ! Total flux subtracted in 200 components = 0.014555 Jy ! Clean residual min=-0.015788 max=0.018635 Jy/beam ! Clean residual mean=0.000004 rms=0.003211 Jy/beam ! Combined flux in latest and established models = 2.39651 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 91 components and 2.39651 Jy ! Inverting map ! Added new window around map position (22.8, -30.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00976982 Jy ! Component: 100 - total flux cleaned = 0.010337 Jy ! Component: 150 - total flux cleaned = 0.0108807 Jy ! Component: 200 - total flux cleaned = 0.012399 Jy ! Total flux subtracted in 200 components = 0.012399 Jy ! Clean residual min=-0.013845 max=0.015694 Jy/beam ! Clean residual mean=0.000001 rms=0.002792 Jy/beam ! Combined flux in latest and established models = 2.40891 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 109 components and 2.40891 Jy ! Inverting map ! Added new window around map position (-8.8, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376286 Jy ! Component: 100 - total flux cleaned = 0.00621169 Jy ! Component: 150 - total flux cleaned = 0.00621116 Jy ! Component: 200 - total flux cleaned = 0.00706301 Jy ! Total flux subtracted in 200 components = 0.00706301 Jy ! Clean residual min=-0.013836 max=0.013434 Jy/beam ! Clean residual mean=0.000000 rms=0.002502 Jy/beam ! Combined flux in latest and established models = 2.41598 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 126 components and 2.41598 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.002 mas, bmaj=3.493 mas, bpa=0.3882 degrees ! Estimated noise=3.56744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632122 Jy ! Component: 100 - total flux cleaned = 0.00906463 Jy ! Component: 150 - total flux cleaned = 0.0101133 Jy ! Component: 200 - total flux cleaned = 0.0105858 Jy ! Total flux subtracted in 200 components = 0.0105858 Jy ! Clean residual min=-0.011424 max=0.011102 Jy/beam ! Clean residual mean=-0.000004 rms=0.003101 Jy/beam ! Combined flux in latest and established models = 2.42656 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213286 Jy ! Component: 100 - total flux cleaned = 0.000629262 Jy ! Component: 150 - total flux cleaned = 0.000822305 Jy ! Component: 200 - total flux cleaned = 0.0011884 Jy ! Total flux subtracted in 200 components = 0.0011884 Jy ! Clean residual min=-0.010385 max=0.010258 Jy/beam ! Clean residual mean=-0.000005 rms=0.002905 Jy/beam ! Combined flux in latest and established models = 2.42775 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 173 components and 2.42775 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7912 mas, bmaj=1.909 mas, bpa=-2.388 degrees ! Estimated noise=2.46865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853888 Jy ! Component: 100 - total flux cleaned = 0.000850492 Jy ! Component: 150 - total flux cleaned = 0.000137327 Jy ! Component: 200 - total flux cleaned = -0.000195584 Jy ! Total flux subtracted in 200 components = -0.000195584 Jy ! Clean residual min=-0.011277 max=0.011347 Jy/beam ! Clean residual mean=-0.000001 rms=0.002156 Jy/beam ! Combined flux in latest and established models = 2.42755 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 193 components and 2.42755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075628Jy sigma=0.243095 ! Fit after self-cal, rms=0.074497Jy sigma=0.238780 wmodel J2229-0832_X_f_map.mod ! Writing 193 model components to file: J2229-0832_X_f_map.mod wobs J2229-0832_X_f_uvs.fits ! Writing UV FITS file: J2229-0832_X_f_uvs.fits wwins J2229-0832_X_f_map.win ! wwins: Wrote 14 windows to J2229-0832_X_f_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227371 Jy ! Component: 100 - total flux cleaned = 0.00262812 Jy ! Component: 150 - total flux cleaned = 0.00262786 Jy ! Component: 200 - total flux cleaned = 0.00262662 Jy ! Component: 250 - total flux cleaned = 0.00309103 Jy ! Component: 300 - total flux cleaned = 0.00339238 Jy ! Component: 350 - total flux cleaned = 0.00368059 Jy ! Component: 400 - total flux cleaned = 0.0038202 Jy ! Component: 450 - total flux cleaned = 0.00381606 Jy ! Component: 500 - total flux cleaned = 0.00381324 Jy ! Component: 550 - total flux cleaned = 0.00381048 Jy ! Component: 600 - total flux cleaned = 0.00393752 Jy ! Component: 650 - total flux cleaned = 0.00381037 Jy ! Component: 700 - total flux cleaned = 0.00380941 Jy ! Component: 750 - total flux cleaned = 0.0039302 Jy ! Component: 800 - total flux cleaned = 0.00404944 Jy ! Component: 850 - total flux cleaned = 0.00428049 Jy ! Component: 900 - total flux cleaned = 0.00439514 Jy ! Component: 950 - total flux cleaned = 0.00472842 Jy ! Component: 1000 - total flux cleaned = 0.00472792 Jy ! Component: 1050 - total flux cleaned = 0.00483519 Jy ! Component: 1100 - total flux cleaned = 0.00504663 Jy ! Component: 1150 - total flux cleaned = 0.00556019 Jy ! Component: 1200 - total flux cleaned = 0.00566025 Jy ! Component: 1250 - total flux cleaned = 0.00546119 Jy ! Component: 1300 - total flux cleaned = 0.00575619 Jy ! Component: 1350 - total flux cleaned = 0.00614076 Jy ! Component: 1400 - total flux cleaned = 0.00632936 Jy ! Component: 1450 - total flux cleaned = 0.00660858 Jy ! Component: 1500 - total flux cleaned = 0.00669765 Jy ! Component: 1550 - total flux cleaned = 0.00687984 Jy ! Component: 1600 - total flux cleaned = 0.00750303 Jy ! Component: 1650 - total flux cleaned = 0.00732657 Jy ! Component: 1700 - total flux cleaned = 0.00792975 Jy ! Component: 1750 - total flux cleaned = 0.00792692 Jy ! Component: 1800 - total flux cleaned = 0.00792679 Jy ! Component: 1850 - total flux cleaned = 0.00850645 Jy ! Component: 1900 - total flux cleaned = 0.00923989 Jy ! Component: 1950 - total flux cleaned = 0.00939979 Jy ! Component: 2000 - total flux cleaned = 0.00979433 Jy ! Component: 2050 - total flux cleaned = 0.0099517 Jy ! Component: 2100 - total flux cleaned = 0.0104158 Jy ! Component: 2150 - total flux cleaned = 0.0107198 Jy ! Component: 2200 - total flux cleaned = 0.0107201 Jy ! Component: 2250 - total flux cleaned = 0.0113874 Jy ! Component: 2300 - total flux cleaned = 0.0116064 Jy ! Component: 2350 - total flux cleaned = 0.0118233 Jy ! Component: 2400 - total flux cleaned = 0.0123222 Jy ! Component: 2450 - total flux cleaned = 0.0126028 Jy ! Component: 2500 - total flux cleaned = 0.0130186 Jy ! Component: 2550 - total flux cleaned = 0.0132237 Jy ! Component: 2600 - total flux cleaned = 0.013427 Jy ! Component: 2650 - total flux cleaned = 0.0137604 Jy ! Component: 2700 - total flux cleaned = 0.0139563 Jy ! Component: 2750 - total flux cleaned = 0.014151 Jy ! Component: 2800 - total flux cleaned = 0.014151 Jy ! Component: 2850 - total flux cleaned = 0.0144686 Jy ! Component: 2900 - total flux cleaned = 0.0145946 Jy ! Component: 2950 - total flux cleaned = 0.0148419 Jy ! Component: 3000 - total flux cleaned = 0.0149027 Jy ! Component: 3050 - total flux cleaned = 0.0152027 Jy ! Component: 3100 - total flux cleaned = 0.0152017 Jy ! Component: 3150 - total flux cleaned = 0.0154359 Jy ! Component: 3200 - total flux cleaned = 0.0154931 Jy ! Component: 3250 - total flux cleaned = 0.0157809 Jy ! Component: 3300 - total flux cleaned = 0.0160078 Jy ! Component: 3350 - total flux cleaned = 0.0162324 Jy ! Component: 3400 - total flux cleaned = 0.0162876 Jy ! Component: 3450 - total flux cleaned = 0.0166178 Jy ! Component: 3500 - total flux cleaned = 0.0167799 Jy ! Component: 3550 - total flux cleaned = 0.0170486 Jy ! Component: 3600 - total flux cleaned = 0.0172082 Jy ! Component: 3650 - total flux cleaned = 0.0174713 Jy ! Component: 3700 - total flux cleaned = 0.0176785 Jy ! Component: 3750 - total flux cleaned = 0.0177301 Jy ! Component: 3800 - total flux cleaned = 0.0179847 Jy ! Component: 3850 - total flux cleaned = 0.0181355 Jy ! Component: 3900 - total flux cleaned = 0.018235 Jy ! Component: 3950 - total flux cleaned = 0.0184325 Jy ! Component: 4000 - total flux cleaned = 0.0186759 Jy ! Component: 4050 - total flux cleaned = 0.0185796 Jy ! Total flux subtracted in 4096 components = 0.0189151 Jy ! Clean residual min=-0.002386 max=0.003042 Jy/beam ! Clean residual mean=-0.000002 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 2.44647 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 480 components and 2.44647 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2229-0832_X_f_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7912 x 1.909 at -2.388 degrees (North through East) ! Clean map min=-0.024342 max=2.0347 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2229-0832_X_f_map.fits wmodel /image_prod/ug002_uva//J2229-0832_X_f_map.mod ! Writing 480 model components to file: /image_prod/ug002_uva//J2229-0832_X_f_map.mod wobs /image_prod/ug002_uva//J2229-0832_X_f_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2229-0832_X_f_uvs.fits wwins /image_prod/ug002_uva//J2229-0832_X_f_map.win ! wwins: Wrote 15 windows to /image_prod/ug002_uva//J2229-0832_X_f_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 2.03467 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000796138 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.117386 0.117386 0.234772 0.469544 0.939088 1.87818 3.75635 7.51271 15.0254 30.0508 60.1016 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak= ", int(1000*peak_flux)/1000 ! peak= 2.034 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2555.67 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2229-0832_X_f_dfm.log closed on Thu Mar 5 05:43:45 2020