! Started logfile: /image_prod/ug002_uva//J2229-0832_S_f_dfm.log on Thu Mar  5 05:43:04 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2229-0832_S_f_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2229-0832_S_f_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.890278 visibilities/baseline/integration-bin.
! Found source: J2229-0832
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 1923 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2229-0832_S_f]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.018328Jy  sigma=7.679729
! Fit after  self-cal, rms=0.868967Jy  sigma=3.189655
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.768 mas, bmaj=6.627 mas, bpa=-2.167 degrees
! Estimated noise=4.76245 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.1932 Jy
! Component: 100  -  total flux cleaned = 1.46182 Jy
! Total flux subtracted in 100 components = 1.46182 Jy
! Clean residual min=-0.110964 max=0.325452 Jy/beam
! Clean residual mean=-0.000113 rms=0.040036 Jy/beam
! Combined flux in latest and established models = 1.46182 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.46182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.609322Jy  sigma=2.569123
! Fit after  self-cal, rms=0.609317Jy  sigma=2.569102
! Inverting map 
! Added new window around map position (-3.5, 9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.275169 Jy
! Component: 100  -  total flux cleaned = 0.392393 Jy
! Total flux subtracted in 100 components = 0.392393 Jy
! Clean residual min=-0.096023 max=0.273281 Jy/beam
! Clean residual mean=-0.000077 rms=0.031068 Jy/beam
! Combined flux in latest and established models = 1.85421 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 20 components and 1.85421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.483972Jy  sigma=2.081161
! Fit after  self-cal, rms=0.457988Jy  sigma=2.004536
! Inverting map 
! Added new window around map position (4, -9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.180357 Jy
! Component: 100  -  total flux cleaned = 0.259296 Jy
! Total flux subtracted in 100 components = 0.259296 Jy
! Clean residual min=-0.094549 max=0.102054 Jy/beam
! Clean residual mean=-0.000050 rms=0.024540 Jy/beam
! Combined flux in latest and established models = 2.11351 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 29 components and 2.11351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.395355Jy  sigma=1.727397
! Fit after  self-cal, rms=0.393119Jy  sigma=1.718112
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=7.508 mas, bpa=-1.918 degrees
! Estimated noise=4.17451 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.058419 Jy
! Component: 100  -  total flux cleaned = 0.0646422 Jy
! Component: 150  -  total flux cleaned = 0.0664167 Jy
! Component: 200  -  total flux cleaned = 0.067886 Jy
! Total flux subtracted in 200 components = 0.067886 Jy
! Clean residual min=-0.096519 max=0.093533 Jy/beam
! Clean residual mean=-0.000098 rms=0.023895 Jy/beam
! Combined flux in latest and established models = 2.18139 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 44 components and 2.18139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.379095Jy  sigma=1.629474
! Fit after  self-cal, rms=0.378422Jy  sigma=1.626452
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.153 x 7.508 at -1.918 degrees (North through East)
! Clean map  min=-0.088384  max=1.408 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        0.87     HN        0.95     KP        0.98     
!   LA        1.01     MK        1.10     NL        0.96     OV        0.87     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        2.28     FD        0.91     HN        0.99     KP        0.94     
!   LA        1.01     MK        1.02     NL        1.13     OV        0.90     
!   PT        1.00     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.44     FD        0.94     HN        0.98     KP        0.91     
!   LA        0.99     MK        1.00     NL        1.02     OV        1.20     
!   PT        1.04     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.378422Jy  sigma=1.626452
! Fit after  self-cal, rms=0.347736Jy  sigma=1.171424
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.12 mas, bmaj=7.707 mas, bpa=-2.503 degrees
! Estimated noise=4.50092 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-65, 87).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102791 Jy
! Component: 100  -  total flux cleaned = -0.012359 Jy
! Component: 150  -  total flux cleaned = -0.0265337 Jy
! Component: 200  -  total flux cleaned = -0.0387225 Jy
! Total flux subtracted in 200 components = -0.0387225 Jy
! Clean residual min=-0.069858 max=0.079999 Jy/beam
! Clean residual mean=-0.000008 rms=0.015820 Jy/beam
! Combined flux in latest and established models = 2.14267 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 67 components and 2.14267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.301365Jy  sigma=0.987735
! Fit after  self-cal, rms=0.299288Jy  sigma=0.980177
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.299288Jy  sigma=0.980177
! Fit after  self-cal, rms=0.216903Jy  sigma=0.704327
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.14 mas, bmaj=7.679 mas, bpa=-2.244 degrees
! Estimated noise=4.52736 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0597881 Jy
! Component: 100  -  total flux cleaned = -0.0716074 Jy
! Component: 150  -  total flux cleaned = -0.0792835 Jy
! Component: 200  -  total flux cleaned = -0.0854463 Jy
! Total flux subtracted in 200 components = -0.0854463 Jy
! Clean residual min=-0.041631 max=0.031328 Jy/beam
! Clean residual mean=0.000002 rms=0.008886 Jy/beam
! Combined flux in latest and established models = 2.05722 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 80 components and 2.05722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.189721Jy  sigma=0.594624
! Fit after  self-cal, rms=0.189333Jy  sigma=0.592462
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00822991 Jy
! Component: 100  -  total flux cleaned = -0.0128867 Jy
! Component: 150  -  total flux cleaned = -0.0162563 Jy
! Component: 200  -  total flux cleaned = -0.018053 Jy
! Total flux subtracted in 200 components = -0.018053 Jy
! Clean residual min=-0.038996 max=0.031158 Jy/beam
! Clean residual mean=-0.000000 rms=0.008384 Jy/beam
! Combined flux in latest and established models = 2.03917 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 98 components and 2.03917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.184537Jy  sigma=0.569696
! Fit after  self-cal, rms=0.184283Jy  sigma=0.568345
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.184283Jy  sigma=0.568345
! Fit after  self-cal, rms=0.183787Jy  sigma=0.532632
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.14 mas, bmaj=7.699 mas, bpa=-2.317 degrees
! Estimated noise=4.5565 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0316914 Jy
! Component: 100  -  total flux cleaned = -0.0385702 Jy
! Component: 150  -  total flux cleaned = -0.0438744 Jy
! Component: 200  -  total flux cleaned = -0.0481363 Jy
! Total flux subtracted in 200 components = -0.0481363 Jy
! Clean residual min=-0.032700 max=0.027283 Jy/beam
! Clean residual mean=0.000005 rms=0.006844 Jy/beam
! Combined flux in latest and established models = 1.99104 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 101 components and 1.99104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.173203Jy  sigma=0.489560
! Fit after  self-cal, rms=0.173031Jy  sigma=0.488567
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00336872 Jy
! Component: 100  -  total flux cleaned = -0.00432959 Jy
! Component: 150  -  total flux cleaned = -0.00475801 Jy
! Component: 200  -  total flux cleaned = -0.0047536 Jy
! Total flux subtracted in 200 components = -0.0047536 Jy
! Clean residual min=-0.031434 max=0.026447 Jy/beam
! Clean residual mean=0.000004 rms=0.006593 Jy/beam
! Combined flux in latest and established models = 1.98628 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 111 components and 1.98628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.170828Jy  sigma=0.477834
! Fit after  self-cal, rms=0.170759Jy  sigma=0.477363
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.170759Jy  sigma=0.477363
! Fit after  self-cal, rms=0.172704Jy  sigma=0.460944
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.225 mas, bmaj=13.24 mas, bpa=0.05604 degrees
! Estimated noise=6.02247 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00964788 Jy
! Component: 100  -  total flux cleaned = -0.0109186 Jy
! Component: 150  -  total flux cleaned = -0.0119012 Jy
! Component: 200  -  total flux cleaned = -0.0131989 Jy
! Total flux subtracted in 200 components = -0.0131989 Jy
! Clean residual min=-0.026400 max=0.025100 Jy/beam
! Clean residual mean=0.000021 rms=0.007573 Jy/beam
! Combined flux in latest and established models = 1.97308 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 135 components and 1.97308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.170804Jy  sigma=0.450633
! Fit after  self-cal, rms=0.170517Jy  sigma=0.449791
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00028066 Jy
! Component: 100  -  total flux cleaned = -0.000623289 Jy
! Component: 150  -  total flux cleaned = -0.000941032 Jy
! Component: 200  -  total flux cleaned = -0.000953176 Jy
! Total flux subtracted in 200 components = -0.000953176 Jy
! Clean residual min=-0.025497 max=0.023830 Jy/beam
! Clean residual mean=0.000018 rms=0.007339 Jy/beam
! Combined flux in latest and established models = 1.97213 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 143 components and 1.97213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.169815Jy  sigma=0.447265
! Fit after  self-cal, rms=0.169621Jy  sigma=0.446879
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.141 mas, bmaj=7.712 mas, bpa=-2.336 degrees
! Estimated noise=4.57288 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.141 x 7.712 at -2.336 degrees (North through East)
! Clean map  min=-0.031848  max=1.54 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.169621Jy  sigma=0.446879
! Fit after  self-cal, rms=0.169323Jy  sigma=0.425151
! Inverting map and beam 
! Estimated beam: bmin=3.133 mas, bmaj=7.725 mas, bpa=-2.548 degrees
! Estimated noise=4.57275 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0193866 Jy
! Component: 100  -  total flux cleaned = -0.0230441 Jy
! Component: 150  -  total flux cleaned = -0.0225634 Jy
! Component: 200  -  total flux cleaned = -0.0230148 Jy
! Total flux subtracted in 200 components = -0.0230148 Jy
! Clean residual min=-0.025878 max=0.022387 Jy/beam
! Clean residual mean=0.000009 rms=0.005173 Jy/beam
! Combined flux in latest and established models = 1.94912 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 150 components and 1.94912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.164453Jy  sigma=0.405196
! Fit after  self-cal, rms=0.164390Jy  sigma=0.404773
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117692 Jy
! Component: 100  -  total flux cleaned = -0.000784976 Jy
! Component: 150  -  total flux cleaned = -0.000428026 Jy
! Component: 200  -  total flux cleaned = -9.50363e-05 Jy
! Total flux subtracted in 200 components = -9.50363e-05 Jy
! Clean residual min=-0.025025 max=0.021619 Jy/beam
! Clean residual mean=0.000009 rms=0.005016 Jy/beam
! Combined flux in latest and established models = 1.94902 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 157 components and 1.94902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.162654Jy  sigma=0.397638
! Fit after  self-cal, rms=0.162577Jy  sigma=0.397319
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.162577Jy  sigma=0.397319
! Fit after  self-cal, rms=0.164500Jy  sigma=0.389538
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.748 mas, bmaj=6.824 mas, bpa=-3.132 degrees
! Estimated noise=5.24499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.31347 Jy
! Component: 100  -  total flux cleaned = 1.60956 Jy
! Component: 150  -  total flux cleaned = 1.71833 Jy
! Component: 200  -  total flux cleaned = 1.78404 Jy
! Total flux subtracted in 200 components = 1.78404 Jy
! Clean residual min=-0.033314 max=0.041290 Jy/beam
! Clean residual mean=-0.000011 rms=0.007938 Jy/beam
! Combined flux in latest and established models = 1.78404 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 1.78404 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.134 mas, bmaj=7.729 mas, bpa=-2.529 degrees
! Estimated noise=4.57707 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.5, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0600837 Jy
! Component: 100  -  total flux cleaned = 0.0999845 Jy
! Component: 150  -  total flux cleaned = 0.129069 Jy
! Component: 200  -  total flux cleaned = 0.144801 Jy
! Total flux subtracted in 200 components = 0.144801 Jy
! Clean residual min=-0.022088 max=0.021207 Jy/beam
! Clean residual mean=0.000005 rms=0.005226 Jy/beam
! Combined flux in latest and established models = 1.92884 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 57 components and 1.92884 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.216 mas, bmaj=13.3 mas, bpa=-0.4174 degrees
! Estimated noise=6.03982 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0237683 Jy
! Component: 100  -  total flux cleaned = 0.029113 Jy
! Component: 150  -  total flux cleaned = 0.0304818 Jy
! Component: 200  -  total flux cleaned = 0.0304858 Jy
! Total flux subtracted in 200 components = 0.0304858 Jy
! Clean residual min=-0.018981 max=0.018431 Jy/beam
! Clean residual mean=0.000022 rms=0.005540 Jy/beam
! Combined flux in latest and established models = 1.95933 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.43708e-06 Jy
! Component: 100  -  total flux cleaned = -0.000318804 Jy
! Component: 150  -  total flux cleaned = -0.000321335 Jy
! Component: 200  -  total flux cleaned = -0.000572978 Jy
! Total flux subtracted in 200 components = -0.000572978 Jy
! Clean residual min=-0.018053 max=0.018071 Jy/beam
! Clean residual mean=0.000023 rms=0.005398 Jy/beam
! Combined flux in latest and established models = 1.95875 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 85 components and 1.95875 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.134 mas, bmaj=7.729 mas, bpa=-2.529 degrees
! Estimated noise=4.57707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00480306 Jy
! Component: 100  -  total flux cleaned = -0.00588802 Jy
! Component: 150  -  total flux cleaned = -0.00499106 Jy
! Component: 200  -  total flux cleaned = -0.00376791 Jy
! Total flux subtracted in 200 components = -0.00376791 Jy
! Clean residual min=-0.016624 max=0.016698 Jy/beam
! Clean residual mean=0.000010 rms=0.004245 Jy/beam
! Combined flux in latest and established models = 1.95498 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 112 components and 1.95498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.160178Jy  sigma=0.370022
! Fit after  self-cal, rms=0.159255Jy  sigma=0.365637
wmodel J2229-0832_S_f_map.mod
! Writing 112 model components to file: J2229-0832_S_f_map.mod
wobs   J2229-0832_S_f_uvs.fits
! Writing UV FITS file: J2229-0832_S_f_uvs.fits
wwins  J2229-0832_S_f_map.win
! wwins: Wrote 5 windows to J2229-0832_S_f_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0036736 Jy
! Component: 100  -  total flux cleaned = -0.00736994 Jy
! Component: 150  -  total flux cleaned = -0.0103237 Jy
! Component: 200  -  total flux cleaned = -0.0134071 Jy
! Component: 250  -  total flux cleaned = -0.0153838 Jy
! Component: 300  -  total flux cleaned = -0.017289 Jy
! Component: 350  -  total flux cleaned = -0.0179818 Jy
! Component: 400  -  total flux cleaned = -0.0193309 Jy
! Component: 450  -  total flux cleaned = -0.0202063 Jy
! Component: 500  -  total flux cleaned = -0.0206368 Jy
! Component: 550  -  total flux cleaned = -0.021878 Jy
! Component: 600  -  total flux cleaned = -0.0222778 Jy
! Component: 650  -  total flux cleaned = -0.0226689 Jy
! Component: 700  -  total flux cleaned = -0.0228584 Jy
! Component: 750  -  total flux cleaned = -0.0230461 Jy
! Component: 800  -  total flux cleaned = -0.0234175 Jy
! Component: 850  -  total flux cleaned = -0.0241407 Jy
! Component: 900  -  total flux cleaned = -0.0248464 Jy
! Component: 950  -  total flux cleaned = -0.0257117 Jy
! Component: 1000  -  total flux cleaned = -0.0258778 Jy
! Component: 1050  -  total flux cleaned = -0.0262135 Jy
! Component: 1100  -  total flux cleaned = -0.0265421 Jy
! Component: 1150  -  total flux cleaned = -0.0267053 Jy
! Component: 1200  -  total flux cleaned = -0.0271864 Jy
! Component: 1250  -  total flux cleaned = -0.0282757 Jy
! Component: 1300  -  total flux cleaned = -0.028581 Jy
! Component: 1350  -  total flux cleaned = -0.0290338 Jy
! Component: 1400  -  total flux cleaned = -0.0297771 Jy
! Component: 1450  -  total flux cleaned = -0.0302177 Jy
! Component: 1500  -  total flux cleaned = -0.0309352 Jy
! Component: 1550  -  total flux cleaned = -0.0312165 Jy
! Component: 1600  -  total flux cleaned = -0.0312158 Jy
! Component: 1650  -  total flux cleaned = -0.0312138 Jy
! Component: 1700  -  total flux cleaned = -0.03108 Jy
! Component: 1750  -  total flux cleaned = -0.0310803 Jy
! Component: 1800  -  total flux cleaned = -0.0306878 Jy
! Component: 1850  -  total flux cleaned = -0.0305608 Jy
! Component: 1900  -  total flux cleaned = -0.0304328 Jy
! Component: 1950  -  total flux cleaned = -0.0305599 Jy
! Component: 2000  -  total flux cleaned = -0.0303131 Jy
! Component: 2050  -  total flux cleaned = -0.0304351 Jy
! Component: 2100  -  total flux cleaned = -0.0303138 Jy
! Component: 2150  -  total flux cleaned = -0.030313 Jy
! Component: 2200  -  total flux cleaned = -0.0298428 Jy
! Component: 2250  -  total flux cleaned = -0.0298435 Jy
! Component: 2300  -  total flux cleaned = -0.0297289 Jy
! Component: 2350  -  total flux cleaned = -0.0295023 Jy
! Component: 2400  -  total flux cleaned = -0.0292799 Jy
! Component: 2450  -  total flux cleaned = -0.0296128 Jy
! Component: 2500  -  total flux cleaned = -0.0295029 Jy
! Component: 2550  -  total flux cleaned = -0.0291793 Jy
! Component: 2600  -  total flux cleaned = -0.0291803 Jy
! Component: 2650  -  total flux cleaned = -0.0292864 Jy
! Component: 2700  -  total flux cleaned = -0.0293906 Jy
! Component: 2750  -  total flux cleaned = -0.0292858 Jy
! Component: 2800  -  total flux cleaned = -0.0290823 Jy
! Component: 2850  -  total flux cleaned = -0.0291842 Jy
! Component: 2900  -  total flux cleaned = -0.0290829 Jy
! Component: 2950  -  total flux cleaned = -0.029083 Jy
! Component: 3000  -  total flux cleaned = -0.0286937 Jy
! Component: 3050  -  total flux cleaned = -0.0289832 Jy
! Component: 3100  -  total flux cleaned = -0.0287922 Jy
! Component: 3150  -  total flux cleaned = -0.0288872 Jy
! Component: 3200  -  total flux cleaned = -0.0290727 Jy
! Component: 3250  -  total flux cleaned = -0.0288882 Jy
! Component: 3300  -  total flux cleaned = -0.0289794 Jy
! Component: 3350  -  total flux cleaned = -0.0288901 Jy
! Component: 3400  -  total flux cleaned = -0.0291561 Jy
! Component: 3450  -  total flux cleaned = -0.0291543 Jy
! Component: 3500  -  total flux cleaned = -0.0294149 Jy
! Component: 3550  -  total flux cleaned = -0.0291552 Jy
! Component: 3600  -  total flux cleaned = -0.0291545 Jy
! Component: 3650  -  total flux cleaned = -0.02907 Jy
! Component: 3700  -  total flux cleaned = -0.0292369 Jy
! Component: 3750  -  total flux cleaned = -0.0289893 Jy
! Component: 3800  -  total flux cleaned = -0.0293171 Jy
! Component: 3850  -  total flux cleaned = -0.029236 Jy
! Component: 3900  -  total flux cleaned = -0.0294761 Jy
! Component: 3950  -  total flux cleaned = -0.0294755 Jy
! Component: 4000  -  total flux cleaned = -0.029553 Jy
! Component: 4050  -  total flux cleaned = -0.0296311 Jy
! Total flux subtracted in 4096 components = -0.0295538 Jy
! Clean residual min=-0.005323 max=0.004659 Jy/beam
! Clean residual mean=0.000006 rms=0.001457 Jy/beam
! Combined flux in latest and established models = 1.92543 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 398 components and 1.92543 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2229-0832_S_f_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.134 x 7.729 at -2.529 degrees (North through East)
! Clean map  min=-0.011279  max=1.6046 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2229-0832_S_f_map.fits
wmodel /image_prod/ug002_uva//J2229-0832_S_f_map.mod
! Writing 398 model components to file: /image_prod/ug002_uva//J2229-0832_S_f_map.mod
wobs   /image_prod/ug002_uva//J2229-0832_S_f_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2229-0832_S_f_uvs.fits
wwins  /image_prod/ug002_uva//J2229-0832_S_f_map.win
! wwins: Wrote 6 windows to /image_prod/ug002_uva//J2229-0832_S_f_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.60459 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0014373 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.268724 0.268724 0.537447 1.07489 2.14979 4.29958 8.59916 17.1983 34.3966 68.7933
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0043 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.604 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1116.39 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2229-0832_S_f_dfm.log closed on Thu Mar  5 05:43:08 2020