! Started logfile: /image_prod/ug002_uva//J2229-0832_S_b_dfm.log on Thu Mar  5 05:42:50 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2229-0832_S_b_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2229-0832_S_b_uva.fits
! AN table 1: 8 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.89881 visibilities/baseline/integration-bin.
! Found source: J2229-0832
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 453 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2229-0832_S_b]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.410328Jy  sigma=10.880791
! Fit after  self-cal, rms=1.273420Jy  sigma=5.590583
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.805 mas, bmaj=19.15 mas, bpa=-21.93 degrees
! Estimated noise=8.11463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.64549 Jy
! Component: 100  -  total flux cleaned = 2.00491 Jy
! Total flux subtracted in 100 components = 2.00491 Jy
! Clean residual min=-0.131585 max=0.294667 Jy/beam
! Clean residual mean=-0.001283 rms=0.056269 Jy/beam
! Combined flux in latest and established models = 2.00491 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 2.00491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.534796Jy  sigma=2.716010
! Fit after  self-cal, rms=0.534783Jy  sigma=2.715976
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.656 mas, bmaj=19.29 mas, bpa=-26.84 degrees
! Estimated noise=7.44019 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-60.5, -29).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.212082 Jy
! Component: 100  -  total flux cleaned = 0.26426 Jy
! Component: 150  -  total flux cleaned = 0.29474 Jy
! Component: 200  -  total flux cleaned = 0.307649 Jy
! Total flux subtracted in 200 components = 0.307649 Jy
! Clean residual min=-0.059265 max=0.071166 Jy/beam
! Clean residual mean=0.000444 rms=0.016887 Jy/beam
! Combined flux in latest and established models = 2.31256 Jy
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 70 components and 2.31256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.458930Jy  sigma=2.267438
! Fit after  self-cal, rms=0.455810Jy  sigma=2.254176
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.656 x 19.29 at -26.84 degrees (North through East)
! Clean map  min=-0.053705  max=2.0176 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.99     KP        0.99     LA        1.92     
!   NL        0.95     OV        0.96     PT        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.73     FD        0.98     KP        1.01     LA        0.80     
!   NL        1.04     OV        1.00     PT        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        0.99     KP        1.00     LA        0.79     
!   NL        0.95     OV        0.98     PT        0.98     
! 
! 
! Fit before self-cal, rms=0.455810Jy  sigma=2.254176
! Fit after  self-cal, rms=0.130607Jy  sigma=0.529329
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.651 mas, bmaj=19.09 mas, bpa=-26.67 degrees
! Estimated noise=7.43105 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00362608 Jy
! Component: 100  -  total flux cleaned = -0.00858982 Jy
! Component: 150  -  total flux cleaned = -0.0114418 Jy
! Component: 200  -  total flux cleaned = -0.0119751 Jy
! Total flux subtracted in 200 components = -0.0119751 Jy
! Clean residual min=-0.020238 max=0.024956 Jy/beam
! Clean residual mean=0.000101 rms=0.006560 Jy/beam
! Combined flux in latest and established models = 2.30058 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 119 components and 2.30058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.123001Jy  sigma=0.495774
! Fit after  self-cal, rms=0.122999Jy  sigma=0.493590
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.122999Jy  sigma=0.493590
! Fit after  self-cal, rms=0.122984Jy  sigma=0.491139
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.631 mas, bmaj=19.08 mas, bpa=-26.66 degrees
! Estimated noise=7.43628 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00105449 Jy
! Component: 100  -  total flux cleaned = -0.00389315 Jy
! Component: 150  -  total flux cleaned = -0.00529433 Jy
! Component: 200  -  total flux cleaned = -0.00657102 Jy
! Total flux subtracted in 200 components = -0.00657102 Jy
! Clean residual min=-0.017071 max=0.018636 Jy/beam
! Clean residual mean=0.000089 rms=0.005494 Jy/beam
! Combined flux in latest and established models = 2.29401 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 158 components and 2.29401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.120577Jy  sigma=0.479986
! Fit after  self-cal, rms=0.120510Jy  sigma=0.479866
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00330024 Jy
! Component: 100  -  total flux cleaned = -0.00465838 Jy
! Component: 150  -  total flux cleaned = -0.00540749 Jy
! Component: 200  -  total flux cleaned = -0.00657032 Jy
! Total flux subtracted in 200 components = -0.00657032 Jy
! Clean residual min=-0.014902 max=0.016157 Jy/beam
! Clean residual mean=0.000075 rms=0.005045 Jy/beam
! Combined flux in latest and established models = 2.28744 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 181 components and 2.28744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119402Jy  sigma=0.475113
! Fit after  self-cal, rms=0.119361Jy  sigma=0.475052
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.119361Jy  sigma=0.475052
! Fit after  self-cal, rms=0.119665Jy  sigma=0.474258
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.622 mas, bmaj=19.08 mas, bpa=-26.64 degrees
! Estimated noise=7.43597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00430344 Jy
! Component: 100  -  total flux cleaned = -0.00582496 Jy
! Component: 150  -  total flux cleaned = -0.00739145 Jy
! Component: 200  -  total flux cleaned = -0.00866816 Jy
! Total flux subtracted in 200 components = -0.00866816 Jy
! Clean residual min=-0.014669 max=0.014070 Jy/beam
! Clean residual mean=0.000070 rms=0.004670 Jy/beam
! Combined flux in latest and established models = 2.27877 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 216 components and 2.27877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118906Jy  sigma=0.470840
! Fit after  self-cal, rms=0.118865Jy  sigma=0.470775
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00220337 Jy
! Component: 100  -  total flux cleaned = -0.00319086 Jy
! Component: 150  -  total flux cleaned = -0.00412179 Jy
! Component: 200  -  total flux cleaned = -0.00501123 Jy
! Total flux subtracted in 200 components = -0.00501123 Jy
! Clean residual min=-0.014437 max=0.012936 Jy/beam
! Clean residual mean=0.000062 rms=0.004472 Jy/beam
! Combined flux in latest and established models = 2.27376 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 243 components and 2.27376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118442Jy  sigma=0.468902
! Fit after  self-cal, rms=0.118421Jy  sigma=0.468859
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118421Jy  sigma=0.468859
! Fit after  self-cal, rms=0.118735Jy  sigma=0.468351
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.08 mas, bmaj=19.19 mas, bpa=-28.36 degrees
! Estimated noise=7.56098 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00487507 Jy
! Component: 100  -  total flux cleaned = -0.00696402 Jy
! Component: 150  -  total flux cleaned = -0.00876571 Jy
! Component: 200  -  total flux cleaned = -0.0106111 Jy
! Total flux subtracted in 200 components = -0.0106111 Jy
! Clean residual min=-0.015642 max=0.012777 Jy/beam
! Clean residual mean=0.000066 rms=0.004920 Jy/beam
! Combined flux in latest and established models = 2.26315 Jy
selfcal
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 281 components and 2.26315 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.118258Jy  sigma=0.466502
! Fit after  self-cal, rms=0.118227Jy  sigma=0.466425
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00240991 Jy
! Component: 100  -  total flux cleaned = -0.00375532 Jy
! Component: 150  -  total flux cleaned = -0.00465772 Jy
! Component: 200  -  total flux cleaned = -0.00540651 Jy
! Total flux subtracted in 200 components = -0.00540651 Jy
! Clean residual min=-0.015257 max=0.012077 Jy/beam
! Clean residual mean=0.000059 rms=0.004770 Jy/beam
! Combined flux in latest and established models = 2.25774 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 314 components and 2.25774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117960Jy  sigma=0.465232
! Fit after  self-cal, rms=0.117951Jy  sigma=0.465172
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.616 mas, bmaj=19.08 mas, bpa=-26.63 degrees
! Estimated noise=7.43566 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.616 x 19.08 at -26.63 degrees (North through East)
! Clean map  min=-0.030742  max=2.0038 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.117951Jy  sigma=0.465172
! Fit after  self-cal, rms=0.114398Jy  sigma=0.431113
! Inverting map and beam 
! Estimated beam: bmin=9.613 mas, bmaj=19.09 mas, bpa=-26.62 degrees
! Estimated noise=7.43269 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00433165 Jy
! Component: 100  -  total flux cleaned = -0.00547682 Jy
! Component: 150  -  total flux cleaned = -0.00617128 Jy
! Component: 200  -  total flux cleaned = -0.00693074 Jy
! Total flux subtracted in 200 components = -0.00693074 Jy
! Clean residual min=-0.013457 max=0.010504 Jy/beam
! Clean residual mean=0.000051 rms=0.003969 Jy/beam
! Combined flux in latest and established models = 2.25081 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 344 components and 2.25081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114042Jy  sigma=0.429648
! Fit after  self-cal, rms=0.114038Jy  sigma=0.429591
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00143302 Jy
! Component: 100  -  total flux cleaned = -0.0022596 Jy
! Component: 150  -  total flux cleaned = -0.00304554 Jy
! Component: 200  -  total flux cleaned = -0.0035181 Jy
! Total flux subtracted in 200 components = -0.0035181 Jy
! Clean residual min=-0.013182 max=0.010429 Jy/beam
! Clean residual mean=0.000048 rms=0.003877 Jy/beam
! Combined flux in latest and established models = 2.24729 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 360 components and 2.24729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113848Jy  sigma=0.428732
! Fit after  self-cal, rms=0.113851Jy  sigma=0.428693
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.113851Jy  sigma=0.428693
! Fit after  self-cal, rms=0.114140Jy  sigma=0.428202
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.612 mas, bmaj=19.15 mas, bpa=-22.07 degrees
! Estimated noise=8.1079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.63942 Jy
! Component: 100  -  total flux cleaned = 2.02939 Jy
! Component: 150  -  total flux cleaned = 2.16331 Jy
! Component: 200  -  total flux cleaned = 2.20581 Jy
! Total flux subtracted in 200 components = 2.20581 Jy
! Clean residual min=-0.035477 max=0.043863 Jy/beam
! Clean residual mean=0.000143 rms=0.011978 Jy/beam
! Combined flux in latest and established models = 2.20581 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 2.20581 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.61 mas, bmaj=19.1 mas, bpa=-26.62 degrees
! Estimated noise=7.43141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0212812 Jy
! Component: 100  -  total flux cleaned = 0.0319168 Jy
! Component: 150  -  total flux cleaned = 0.0361962 Jy
! Component: 200  -  total flux cleaned = 0.0397634 Jy
! Total flux subtracted in 200 components = 0.0397634 Jy
! Clean residual min=-0.020643 max=0.026406 Jy/beam
! Clean residual mean=0.000079 rms=0.007571 Jy/beam
! Combined flux in latest and established models = 2.24557 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 79 components and 2.24557 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.08 mas, bmaj=19.21 mas, bpa=-28.34 degrees
! Estimated noise=7.55748 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243697 Jy
! Component: 100  -  total flux cleaned = 0.00191073 Jy
! Component: 150  -  total flux cleaned = 0.00146446 Jy
! Component: 200  -  total flux cleaned = 0.00104418 Jy
! Total flux subtracted in 200 components = 0.00104418 Jy
! Clean residual min=-0.019496 max=0.022247 Jy/beam
! Clean residual mean=0.000104 rms=0.006761 Jy/beam
! Combined flux in latest and established models = 2.24661 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000758503 Jy
! Component: 100  -  total flux cleaned = -0.00181748 Jy
! Component: 150  -  total flux cleaned = -0.00348113 Jy
! Component: 200  -  total flux cleaned = -0.00535198 Jy
! Total flux subtracted in 200 components = -0.00535198 Jy
! Clean residual min=-0.017679 max=0.019879 Jy/beam
! Clean residual mean=0.000094 rms=0.006082 Jy/beam
! Combined flux in latest and established models = 2.24126 Jy
! Adding 98 model components to the UV plane model.
! The established model now contains 167 components and 2.24126 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.61 mas, bmaj=19.1 mas, bpa=-26.62 degrees
! Estimated noise=7.43141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234835 Jy
! Component: 100  -  total flux cleaned = 0.00234331 Jy
! Component: 150  -  total flux cleaned = 0.00156226 Jy
! Component: 200  -  total flux cleaned = 0.000576751 Jy
! Total flux subtracted in 200 components = 0.000576751 Jy
! Clean residual min=-0.015564 max=0.016923 Jy/beam
! Clean residual mean=0.000073 rms=0.005061 Jy/beam
! Combined flux in latest and established models = 2.24184 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 196 components and 2.24184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.116280Jy  sigma=0.440132
! Fit after  self-cal, rms=0.116274Jy  sigma=0.439734
wmodel J2229-0832_S_b_map.mod
! Writing 196 model components to file: J2229-0832_S_b_map.mod
wobs   J2229-0832_S_b_uvs.fits
! Writing UV FITS file: J2229-0832_S_b_uvs.fits
wwins  J2229-0832_S_b_map.win
! wwins: Wrote 2 windows to J2229-0832_S_b_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183039 Jy
! Component: 100  -  total flux cleaned = 0.00230225 Jy
! Component: 150  -  total flux cleaned = 0.0023172 Jy
! Component: 200  -  total flux cleaned = 0.00251945 Jy
! Component: 250  -  total flux cleaned = 0.00287039 Jy
! Component: 300  -  total flux cleaned = 0.00286713 Jy
! Component: 350  -  total flux cleaned = 0.00302261 Jy
! Component: 400  -  total flux cleaned = 0.00345041 Jy
! Component: 450  -  total flux cleaned = 0.00371561 Jy
! Component: 500  -  total flux cleaned = 0.0040838 Jy
! Component: 550  -  total flux cleaned = 0.0039727 Jy
! Component: 600  -  total flux cleaned = 0.00397283 Jy
! Component: 650  -  total flux cleaned = 0.00397334 Jy
! Component: 700  -  total flux cleaned = 0.00377826 Jy
! Component: 750  -  total flux cleaned = 0.00377823 Jy
! Component: 800  -  total flux cleaned = 0.00404784 Jy
! Component: 850  -  total flux cleaned = 0.00413697 Jy
! Component: 900  -  total flux cleaned = 0.00439402 Jy
! Component: 950  -  total flux cleaned = 0.00464175 Jy
! Component: 1000  -  total flux cleaned = 0.00512187 Jy
! Component: 1050  -  total flux cleaned = 0.0056712 Jy
! Component: 1100  -  total flux cleaned = 0.00636045 Jy
! Component: 1150  -  total flux cleaned = 0.00688617 Jy
! Component: 1200  -  total flux cleaned = 0.00754816 Jy
! Component: 1250  -  total flux cleaned = 0.00754686 Jy
! Component: 1300  -  total flux cleaned = 0.00725867 Jy
! Component: 1350  -  total flux cleaned = 0.00682511 Jy
! Component: 1400  -  total flux cleaned = 0.00638927 Jy
! Component: 1450  -  total flux cleaned = 0.0059512 Jy
! Component: 1500  -  total flux cleaned = 0.00558309 Jy
! Component: 1550  -  total flux cleaned = 0.0052093 Jy
! Component: 1600  -  total flux cleaned = 0.00482471 Jy
! Component: 1650  -  total flux cleaned = 0.0045086 Jy
! Component: 1700  -  total flux cleaned = 0.0041025 Jy
! Component: 1750  -  total flux cleaned = 0.0037673 Jy
! Component: 1800  -  total flux cleaned = 0.00342298 Jy
! Component: 1850  -  total flux cleaned = 0.00315649 Jy
! Component: 1900  -  total flux cleaned = 0.00287883 Jy
! Component: 1950  -  total flux cleaned = 0.00259308 Jy
! Component: 2000  -  total flux cleaned = 0.00219762 Jy
! Component: 2050  -  total flux cleaned = 0.00199229 Jy
! Component: 2100  -  total flux cleaned = 0.00157082 Jy
! Component: 2150  -  total flux cleaned = 0.00124045 Jy
! Component: 2200  -  total flux cleaned = 0.000896588 Jy
! Component: 2250  -  total flux cleaned = 0.000544781 Jy
! Component: 2300  -  total flux cleaned = 0.000178321 Jy
! Component: 2350  -  total flux cleaned = -0.000204904 Jy
! Component: 2400  -  total flux cleaned = -0.000600944 Jy
! Component: 2450  -  total flux cleaned = -0.000872609 Jy
! Component: 2500  -  total flux cleaned = -0.00144164 Jy
! Component: 2550  -  total flux cleaned = -0.00173738 Jy
! Component: 2600  -  total flux cleaned = -0.00219695 Jy
! Component: 2650  -  total flux cleaned = -0.00267288 Jy
! Component: 2700  -  total flux cleaned = -0.00317006 Jy
! Component: 2750  -  total flux cleaned = -0.00368537 Jy
! Component: 2800  -  total flux cleaned = -0.00421996 Jy
! Component: 2850  -  total flux cleaned = -0.00477743 Jy
! Component: 2900  -  total flux cleaned = -0.00535208 Jy
! Component: 2950  -  total flux cleaned = -0.0059544 Jy
! Component: 3000  -  total flux cleaned = -0.00678414 Jy
! Component: 3050  -  total flux cleaned = -0.00743504 Jy
! Component: 3100  -  total flux cleaned = -0.0081077 Jy
! Component: 3150  -  total flux cleaned = -0.00927794 Jy
! Component: 3200  -  total flux cleaned = -0.0100164 Jy
! Component: 3250  -  total flux cleaned = -0.0110351 Jy
! Component: 3300  -  total flux cleaned = -0.0115646 Jy
! Component: 3350  -  total flux cleaned = -0.0123908 Jy
! Component: 3400  -  total flux cleaned = -0.0135426 Jy
! Component: 3450  -  total flux cleaned = -0.0141474 Jy
! Component: 3500  -  total flux cleaned = -0.0147732 Jy
! Component: 3550  -  total flux cleaned = -0.0150971 Jy
! Component: 3600  -  total flux cleaned = -0.0157798 Jy
! Component: 3650  -  total flux cleaned = -0.016138 Jy
! Component: 3700  -  total flux cleaned = -0.0161411 Jy
! Component: 3750  -  total flux cleaned = -0.0165286 Jy
! Component: 3800  -  total flux cleaned = -0.0169367 Jy
! Component: 3850  -  total flux cleaned = -0.0169346 Jy
! Component: 3900  -  total flux cleaned = -0.0173751 Jy
! Component: 3950  -  total flux cleaned = -0.0178338 Jy
! Component: 4000  -  total flux cleaned = -0.0183165 Jy
! Component: 4050  -  total flux cleaned = -0.0183104 Jy
! Total flux subtracted in 4096 components = -0.0188401 Jy
! Clean residual min=-0.029194 max=0.030812 Jy/beam
! Clean residual mean=0.000048 rms=0.008190 Jy/beam
! Combined flux in latest and established models = 2.223 Jy
keep
! Adding 267 model components to the UV plane model.
! The established model now contains 463 components and 2.223 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2229-0832_S_b_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.61 x 19.1 at -26.62 degrees (North through East)
! Clean map  min=-0.052913  max=2.0211 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2229-0832_S_b_map.fits
wmodel /image_prod/ug002_uva//J2229-0832_S_b_map.mod
! Writing 463 model components to file: /image_prod/ug002_uva//J2229-0832_S_b_map.mod
wobs   /image_prod/ug002_uva//J2229-0832_S_b_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2229-0832_S_b_uvs.fits
wwins  /image_prod/ug002_uva//J2229-0832_S_b_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J2229-0832_S_b_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.02111 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00960901 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.4263 1.4263 2.85259 5.70518 11.4104 22.8207 45.6415 91.283
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0288 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.021 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  210.335 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2229-0832_S_b_dfm.log closed on Thu Mar  5 05:42:54 2020