! Started logfile: /image_prod/ug002_uva//J2225-0457_X_j_dfm.log on Thu Mar 5 05:41:19 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2225-0457_X_j_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2225-0457_X_j_uva.fits ! AN table 1: 17 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.663399 visibilities/baseline/integration-bin. ! Found source: J2225-0457 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 4872 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2225-0457_X_j] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.774781Jy sigma=7.500127 ! Fit after self-cal, rms=0.695672Jy sigma=2.455390 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6622 mas, bmaj=1.691 mas, bpa=-0.5422 degrees ! Estimated noise=2.916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.91774 Jy ! Component: 100 - total flux cleaned = 1.12543 Jy ! Total flux subtracted in 100 components = 1.12543 Jy ! Clean residual min=-0.085184 max=0.284451 Jy/beam ! Clean residual mean=0.000017 rms=0.022862 Jy/beam ! Combined flux in latest and established models = 1.12543 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 1.12543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.646291Jy sigma=2.337540 ! Fit after self-cal, rms=0.646174Jy sigma=2.337319 ! Inverting map ! Added new window around map position (2.2, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.248914 Jy ! Component: 100 - total flux cleaned = 0.388625 Jy ! Total flux subtracted in 100 components = 0.388625 Jy ! Clean residual min=-0.069497 max=0.101640 Jy/beam ! Clean residual mean=0.000017 rms=0.013982 Jy/beam ! Combined flux in latest and established models = 1.51405 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 24 components and 1.51405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.443664Jy sigma=1.519690 ! Fit after self-cal, rms=0.434366Jy sigma=1.481346 ! Inverting map ! Added new window around map position (3, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119268 Jy ! Component: 100 - total flux cleaned = 0.212007 Jy ! Total flux subtracted in 100 components = 0.212007 Jy ! Clean residual min=-0.054543 max=0.066480 Jy/beam ! Clean residual mean=0.000018 rms=0.010693 Jy/beam ! Combined flux in latest and established models = 1.72606 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 1.72606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.347468Jy sigma=1.176638 ! Fit after self-cal, rms=0.345742Jy sigma=1.172099 ! Inverting map ! Added new window around map position (0.4, -2.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0809973 Jy ! Component: 100 - total flux cleaned = 0.148321 Jy ! Total flux subtracted in 100 components = 0.148321 Jy ! Clean residual min=-0.048340 max=0.055286 Jy/beam ! Clean residual mean=0.000017 rms=0.008840 Jy/beam ! Combined flux in latest and established models = 1.87438 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 45 components and 1.87438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.294001Jy sigma=0.994425 ! Fit after self-cal, rms=0.293337Jy sigma=0.992091 ! Inverting map ! Added new window around map position (-10.8, 14.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.061595 Jy ! Component: 100 - total flux cleaned = 0.113004 Jy ! Total flux subtracted in 100 components = 0.113004 Jy ! Clean residual min=-0.039468 max=0.035548 Jy/beam ! Clean residual mean=0.000020 rms=0.007587 Jy/beam ! Combined flux in latest and established models = 1.98738 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 1.98738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.257748Jy sigma=0.877407 ! Fit after self-cal, rms=0.257131Jy sigma=0.875662 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.815 mas, bmaj=1.944 mas, bpa=0.05808 degrees ! Estimated noise=2.30141 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0780746 Jy ! Component: 100 - total flux cleaned = 0.138491 Jy ! Component: 150 - total flux cleaned = 0.186523 Jy ! Component: 200 - total flux cleaned = 0.225117 Jy ! Total flux subtracted in 200 components = 0.225117 Jy ! Clean residual min=-0.040642 max=0.038190 Jy/beam ! Clean residual mean=0.000039 rms=0.009154 Jy/beam ! Combined flux in latest and established models = 2.2125 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 69 components and 2.2125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.198752Jy sigma=0.713114 ! Fit after self-cal, rms=0.197498Jy sigma=0.707728 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.815 x 1.944 at 0.05808 degrees (North through East) ! Clean map min=-0.038659 max=1.2834 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 0.96 KP 1.05 LA 1.02 ! MK 1.03 NL 1.10 OV 0.93 PT 0.88 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.96 KP 1.04 LA 1.00 ! MK 1.03 NL 1.10 OV 0.92 PT 0.91 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.97 KP 1.04 LA 1.04 ! MK 1.02 NL 1.12 OV 0.92 PT 0.92 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.97 KP 1.04 LA 1.03 ! MK 1.04 NL 1.12 OV 0.94 PT 0.89 ! SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.98 KP 1.04 LA 1.03 ! MK 1.01 NL 1.10 OV 0.92 PT 0.91 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 0.97 KP 1.04 LA 1.02 ! MK 1.05 NL 1.11 OV 0.93 PT 0.93 ! SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 HN 1.01 KP 1.03 LA 1.01 ! MK 1.06 NL 1.12 OV 0.93 PT 0.90 ! SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 0.99 KP 1.03 LA 1.01 ! MK 1.07 NL 1.10 OV 0.92 PT 0.92 ! SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 HN 1.00 KP 1.02 LA 1.01 ! MK 1.09 NL 1.11 OV 0.90 PT 0.90 ! SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.94 KP 1.04 LA 1.02 ! MK 1.07 NL 1.12 OV 0.94 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 HN 1.01 KP 1.03 LA 1.02 ! MK 1.06 NL 1.12 OV 0.92 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 HN 0.99 KP 1.03 LA 1.01 ! MK 1.07 NL 1.12 OV 0.91 PT 0.91 ! SC 1.04 ! ! ! Fit before self-cal, rms=0.197498Jy sigma=0.707728 ! Fit after self-cal, rms=0.126345Jy sigma=0.504620 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8281 mas, bmaj=1.961 mas, bpa=0.4784 degrees ! Estimated noise=2.28127 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.6, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341091 Jy ! Component: 100 - total flux cleaned = 0.0424262 Jy ! Component: 150 - total flux cleaned = 0.0430666 Jy ! Component: 200 - total flux cleaned = 0.0430772 Jy ! Total flux subtracted in 200 components = 0.0430772 Jy ! Clean residual min=-0.023436 max=0.022976 Jy/beam ! Clean residual mean=0.000001 rms=0.004807 Jy/beam ! Combined flux in latest and established models = 2.25558 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 2.25558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113842Jy sigma=0.450336 ! Fit after self-cal, rms=0.112303Jy sigma=0.445862 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112303Jy sigma=0.445862 ! Fit after self-cal, rms=0.101347Jy sigma=0.420006 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8278 mas, bmaj=1.963 mas, bpa=0.3902 degrees ! Estimated noise=2.28454 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.81172e-05 Jy ! Component: 100 - total flux cleaned = 0.0018676 Jy ! Component: 150 - total flux cleaned = 0.00259416 Jy ! Component: 200 - total flux cleaned = 0.0023001 Jy ! Total flux subtracted in 200 components = 0.0023001 Jy ! Clean residual min=-0.017860 max=0.018132 Jy/beam ! Clean residual mean=0.000013 rms=0.003934 Jy/beam ! Combined flux in latest and established models = 2.25788 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 97 components and 2.25788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098221Jy sigma=0.402815 ! Fit after self-cal, rms=0.097759Jy sigma=0.401587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178022 Jy ! Component: 100 - total flux cleaned = 0.025162 Jy ! Component: 150 - total flux cleaned = 0.0283756 Jy ! Component: 200 - total flux cleaned = 0.0292143 Jy ! Total flux subtracted in 200 components = 0.0292143 Jy ! Clean residual min=-0.016237 max=0.013717 Jy/beam ! Clean residual mean=0.000008 rms=0.003556 Jy/beam ! Combined flux in latest and established models = 2.28709 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 116 components and 2.28709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093751Jy sigma=0.382682 ! Fit after self-cal, rms=0.093343Jy sigma=0.381297 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093343Jy sigma=0.381297 ! Fit after self-cal, rms=0.081982Jy sigma=0.344475 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8269 mas, bmaj=1.963 mas, bpa=0.3828 degrees ! Estimated noise=2.27937 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00715986 Jy ! Component: 100 - total flux cleaned = 0.0108562 Jy ! Component: 150 - total flux cleaned = 0.0130973 Jy ! Component: 200 - total flux cleaned = 0.0135848 Jy ! Total flux subtracted in 200 components = 0.0135848 Jy ! Clean residual min=-0.011831 max=0.010488 Jy/beam ! Clean residual mean=-0.000010 rms=0.002571 Jy/beam ! Combined flux in latest and established models = 2.30068 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 126 components and 2.30068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079715Jy sigma=0.333350 ! Fit after self-cal, rms=0.079542Jy sigma=0.332575 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000781876 Jy ! Component: 100 - total flux cleaned = 0.0016414 Jy ! Component: 150 - total flux cleaned = 0.00223321 Jy ! Component: 200 - total flux cleaned = 0.00310776 Jy ! Total flux subtracted in 200 components = 0.00310776 Jy ! Clean residual min=-0.010739 max=0.009407 Jy/beam ! Clean residual mean=-0.000011 rms=0.002466 Jy/beam ! Combined flux in latest and established models = 2.30379 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 134 components and 2.30379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078566Jy sigma=0.327812 ! Fit after self-cal, rms=0.078473Jy sigma=0.327484 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078473Jy sigma=0.327484 ! Fit after self-cal, rms=0.077763Jy sigma=0.325352 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.848 mas, bmaj=3.585 mas, bpa=4.634 degrees ! Estimated noise=3.18129 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000492947 Jy ! Component: 100 - total flux cleaned = 0.00024918 Jy ! Component: 150 - total flux cleaned = 0.000660449 Jy ! Component: 200 - total flux cleaned = 0.00101869 Jy ! Total flux subtracted in 200 components = 0.00101869 Jy ! Clean residual min=-0.015362 max=0.013426 Jy/beam ! Clean residual mean=-0.000030 rms=0.003944 Jy/beam ! Combined flux in latest and established models = 2.3048 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 151 components and 2.3048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077126Jy sigma=0.323346 ! Fit after self-cal, rms=0.077069Jy sigma=0.322650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000727572 Jy ! Component: 100 - total flux cleaned = 0.000729394 Jy ! Component: 150 - total flux cleaned = 0.000722666 Jy ! Component: 200 - total flux cleaned = 0.000471895 Jy ! Total flux subtracted in 200 components = 0.000471895 Jy ! Clean residual min=-0.014959 max=0.013543 Jy/beam ! Clean residual mean=-0.000032 rms=0.003879 Jy/beam ! Combined flux in latest and established models = 2.30528 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 158 components and 2.30528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076908Jy sigma=0.322614 ! Fit after self-cal, rms=0.076897Jy sigma=0.322431 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8266 mas, bmaj=1.963 mas, bpa=0.3938 degrees ! Estimated noise=2.27735 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8266 x 1.963 at 0.3938 degrees (North through East) ! Clean map min=-0.0090059 max=1.2712 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076897Jy sigma=0.322431 ! Fit after self-cal, rms=0.072386Jy sigma=0.297498 ! Inverting map and beam ! Estimated beam: bmin=0.8264 mas, bmaj=1.963 mas, bpa=0.3538 degrees ! Estimated noise=2.27531 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144713 Jy ! Component: 100 - total flux cleaned = 0.000593032 Jy ! Component: 150 - total flux cleaned = 0.000234667 Jy ! Component: 200 - total flux cleaned = 0.000237241 Jy ! Total flux subtracted in 200 components = 0.000237241 Jy ! Clean residual min=-0.009227 max=0.008233 Jy/beam ! Clean residual mean=-0.000012 rms=0.002152 Jy/beam ! Combined flux in latest and established models = 2.30551 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 172 components and 2.30551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071322Jy sigma=0.292123 ! Fit after self-cal, rms=0.071229Jy sigma=0.291789 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000507198 Jy ! Component: 100 - total flux cleaned = 0.000203315 Jy ! Component: 150 - total flux cleaned = 0.00045385 Jy ! Component: 200 - total flux cleaned = 0.000807644 Jy ! Total flux subtracted in 200 components = 0.000807644 Jy ! Clean residual min=-0.008557 max=0.008156 Jy/beam ! Clean residual mean=-0.000012 rms=0.002109 Jy/beam ! Combined flux in latest and established models = 2.30632 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 179 components and 2.30632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070742Jy sigma=0.289435 ! Fit after self-cal, rms=0.070704Jy sigma=0.289270 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070704Jy sigma=0.289270 ! Fit after self-cal, rms=0.070311Jy sigma=0.288052 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6714 mas, bmaj=1.702 mas, bpa=-0.1663 degrees ! Estimated noise=2.913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.914249 Jy ! Component: 100 - total flux cleaned = 1.21604 Jy ! Component: 150 - total flux cleaned = 1.4058 Jy ! Component: 200 - total flux cleaned = 1.54099 Jy ! Total flux subtracted in 200 components = 1.54099 Jy ! Clean residual min=-0.053788 max=0.078873 Jy/beam ! Clean residual mean=0.000011 rms=0.011665 Jy/beam ! Combined flux in latest and established models = 1.54099 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 1.54099 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8263 mas, bmaj=1.964 mas, bpa=0.3722 degrees ! Estimated noise=2.27377 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165219 Jy ! Component: 100 - total flux cleaned = 0.284934 Jy ! Component: 150 - total flux cleaned = 0.375173 Jy ! Component: 200 - total flux cleaned = 0.445047 Jy ! Total flux subtracted in 200 components = 0.445047 Jy ! Clean residual min=-0.022938 max=0.041375 Jy/beam ! Clean residual mean=0.000022 rms=0.007276 Jy/beam ! Combined flux in latest and established models = 1.98604 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 42 components and 1.98604 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.055096 Jy ! Component: 100 - total flux cleaned = 0.0989806 Jy ! Component: 150 - total flux cleaned = 0.134349 Jy ! Component: 200 - total flux cleaned = 0.162997 Jy ! Total flux subtracted in 200 components = 0.162997 Jy ! Clean residual min=-0.014162 max=0.018275 Jy/beam ! Clean residual mean=0.000006 rms=0.003811 Jy/beam ! Combined flux in latest and established models = 2.14903 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 62 components and 2.14903 Jy ! Inverting map ! Added new window around map position (19.6, -22.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238138 Jy ! Component: 100 - total flux cleaned = 0.0437358 Jy ! Component: 150 - total flux cleaned = 0.0604623 Jy ! Component: 200 - total flux cleaned = 0.0745582 Jy ! Total flux subtracted in 200 components = 0.0745582 Jy ! Clean residual min=-0.010488 max=0.012493 Jy/beam ! Clean residual mean=-0.000001 rms=0.002620 Jy/beam ! Combined flux in latest and established models = 2.22359 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 82 components and 2.22359 Jy ! Inverting map ! Added new window around map position (14.2, -16.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130586 Jy ! Component: 100 - total flux cleaned = 0.0235353 Jy ! Component: 150 - total flux cleaned = 0.0325767 Jy ! Component: 200 - total flux cleaned = 0.0404241 Jy ! Total flux subtracted in 200 components = 0.0404241 Jy ! Clean residual min=-0.008782 max=0.007876 Jy/beam ! Clean residual mean=-0.000007 rms=0.002164 Jy/beam ! Combined flux in latest and established models = 2.26402 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 100 components and 2.26402 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.846 mas, bmaj=3.587 mas, bpa=4.565 degrees ! Estimated noise=3.18077 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013073 Jy ! Component: 100 - total flux cleaned = 0.0223217 Jy ! Component: 150 - total flux cleaned = 0.0293533 Jy ! Component: 200 - total flux cleaned = 0.033238 Jy ! Total flux subtracted in 200 components = 0.033238 Jy ! Clean residual min=-0.012262 max=0.011083 Jy/beam ! Clean residual mean=-0.000030 rms=0.003557 Jy/beam ! Combined flux in latest and established models = 2.29726 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237228 Jy ! Component: 100 - total flux cleaned = 0.00413278 Jy ! Component: 150 - total flux cleaned = 0.00572107 Jy ! Component: 200 - total flux cleaned = 0.00701929 Jy ! Total flux subtracted in 200 components = 0.00701929 Jy ! Clean residual min=-0.011881 max=0.010793 Jy/beam ! Clean residual mean=-0.000032 rms=0.003460 Jy/beam ! Combined flux in latest and established models = 2.30428 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 146 components and 2.30428 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8263 mas, bmaj=1.964 mas, bpa=0.3722 degrees ! Estimated noise=2.27377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322271 Jy ! Component: 100 - total flux cleaned = 0.00319982 Jy ! Component: 150 - total flux cleaned = 0.00380213 Jy ! Component: 200 - total flux cleaned = 0.0046294 Jy ! Total flux subtracted in 200 components = 0.0046294 Jy ! Clean residual min=-0.007965 max=0.007103 Jy/beam ! Clean residual mean=-0.000013 rms=0.001876 Jy/beam ! Combined flux in latest and established models = 2.30891 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 167 components and 2.30891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068752Jy sigma=0.281098 ! Fit after self-cal, rms=0.068516Jy sigma=0.279387 wmodel J2225-0457_X_j_map.mod ! Writing 167 model components to file: J2225-0457_X_j_map.mod wobs J2225-0457_X_j_uvs.fits ! Writing UV FITS file: J2225-0457_X_j_uvs.fits wwins J2225-0457_X_j_map.win ! wwins: Wrote 9 windows to J2225-0457_X_j_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00354968 Jy ! Component: 100 - total flux cleaned = -0.00611917 Jy ! Component: 150 - total flux cleaned = -0.00719584 Jy ! Component: 200 - total flux cleaned = -0.00776704 Jy ! Component: 250 - total flux cleaned = -0.00821096 Jy ! Component: 300 - total flux cleaned = -0.00874477 Jy ! Component: 350 - total flux cleaned = -0.00895376 Jy ! Component: 400 - total flux cleaned = -0.00935857 Jy ! Component: 450 - total flux cleaned = -0.009749 Jy ! Component: 500 - total flux cleaned = -0.0098432 Jy ! Component: 550 - total flux cleaned = -0.0100287 Jy ! Component: 600 - total flux cleaned = -0.0103028 Jy ! Component: 650 - total flux cleaned = -0.0104812 Jy ! Component: 700 - total flux cleaned = -0.0105695 Jy ! Component: 750 - total flux cleaned = -0.0110023 Jy ! Component: 800 - total flux cleaned = -0.0112536 Jy ! Component: 850 - total flux cleaned = -0.0110878 Jy ! Component: 900 - total flux cleaned = -0.0110069 Jy ! Component: 950 - total flux cleaned = -0.0110884 Jy ! Component: 1000 - total flux cleaned = -0.0110873 Jy ! Component: 1050 - total flux cleaned = -0.0110096 Jy ! Component: 1100 - total flux cleaned = -0.0109346 Jy ! Component: 1150 - total flux cleaned = -0.0109353 Jy ! Component: 1200 - total flux cleaned = -0.0108615 Jy ! Component: 1250 - total flux cleaned = -0.0110061 Jy ! Component: 1300 - total flux cleaned = -0.0110058 Jy ! Component: 1350 - total flux cleaned = -0.0110758 Jy ! Component: 1400 - total flux cleaned = -0.0110747 Jy ! Component: 1450 - total flux cleaned = -0.0110075 Jy ! Component: 1500 - total flux cleaned = -0.011076 Jy ! Component: 1550 - total flux cleaned = -0.0110771 Jy ! Component: 1600 - total flux cleaned = -0.0112734 Jy ! Component: 1650 - total flux cleaned = -0.0111438 Jy ! Component: 1700 - total flux cleaned = -0.0111439 Jy ! Component: 1750 - total flux cleaned = -0.01127 Jy ! Component: 1800 - total flux cleaned = -0.0111468 Jy ! Component: 1850 - total flux cleaned = -0.010966 Jy ! Component: 1900 - total flux cleaned = -0.0111467 Jy ! Component: 1950 - total flux cleaned = -0.011089 Jy ! Component: 2000 - total flux cleaned = -0.0112058 Jy ! Component: 2050 - total flux cleaned = -0.0109757 Jy ! Component: 2100 - total flux cleaned = -0.0111464 Jy ! Component: 2150 - total flux cleaned = -0.0108661 Jy ! Component: 2200 - total flux cleaned = -0.0107014 Jy ! Component: 2250 - total flux cleaned = -0.0108661 Jy ! Component: 2300 - total flux cleaned = -0.0104868 Jy ! Component: 2350 - total flux cleaned = -0.0108082 Jy ! Component: 2400 - total flux cleaned = -0.0105961 Jy ! Component: 2450 - total flux cleaned = -0.0104915 Jy ! Component: 2500 - total flux cleaned = -0.010079 Jy ! Component: 2550 - total flux cleaned = -0.00982469 Jy ! Component: 2600 - total flux cleaned = -0.00957239 Jy ! Component: 2650 - total flux cleaned = -0.00922309 Jy ! Component: 2700 - total flux cleaned = -0.0090262 Jy ! Component: 2750 - total flux cleaned = -0.00882962 Jy ! Component: 2800 - total flux cleaned = -0.0086367 Jy ! Component: 2850 - total flux cleaned = -0.00834972 Jy ! Component: 2900 - total flux cleaned = -0.00825539 Jy ! Component: 2950 - total flux cleaned = -0.00811405 Jy ! Component: 3000 - total flux cleaned = -0.00792765 Jy ! Component: 3050 - total flux cleaned = -0.00765207 Jy ! Component: 3100 - total flux cleaned = -0.00751545 Jy ! Component: 3150 - total flux cleaned = -0.00724567 Jy ! Component: 3200 - total flux cleaned = -0.0072015 Jy ! Component: 3250 - total flux cleaned = -0.00702504 Jy ! Component: 3300 - total flux cleaned = -0.00689382 Jy ! Component: 3350 - total flux cleaned = -0.00663385 Jy ! Component: 3400 - total flux cleaned = -0.00663335 Jy ! Component: 3450 - total flux cleaned = -0.00659131 Jy ! Component: 3500 - total flux cleaned = -0.0063392 Jy ! Component: 3550 - total flux cleaned = -0.00629707 Jy ! Component: 3600 - total flux cleaned = -0.00617272 Jy ! Component: 3650 - total flux cleaned = -0.00600857 Jy ! Component: 3700 - total flux cleaned = -0.00604944 Jy ! Component: 3750 - total flux cleaned = -0.00604965 Jy ! Component: 3800 - total flux cleaned = -0.00592997 Jy ! Component: 3850 - total flux cleaned = -0.00569302 Jy ! Component: 3900 - total flux cleaned = -0.00561582 Jy ! Component: 3950 - total flux cleaned = -0.00565487 Jy ! Component: 4000 - total flux cleaned = -0.00546301 Jy ! Component: 4050 - total flux cleaned = -0.0056157 Jy ! Total flux subtracted in 4096 components = -0.00546387 Jy ! Clean residual min=-0.002103 max=0.002541 Jy/beam ! Clean residual mean=-0.000009 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 2.30344 Jy keep ! Adding 385 model components to the UV plane model. ! The established model now contains 552 components and 2.30344 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2225-0457_X_j_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8263 x 1.964 at 0.3722 degrees (North through East) ! Clean map min=-0.0046096 max=1.2785 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2225-0457_X_j_map.fits wmodel /image_prod/ug002_uva//J2225-0457_X_j_map.mod ! Writing 552 model components to file: /image_prod/ug002_uva//J2225-0457_X_j_map.mod wobs /image_prod/ug002_uva//J2225-0457_X_j_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2225-0457_X_j_uvs.fits wwins /image_prod/ug002_uva//J2225-0457_X_j_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J2225-0457_X_j_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.27851 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000721945 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.169403 0.169403 0.338806 0.677612 1.35522 2.71045 5.4209 10.8418 21.6836 43.3672 86.7344 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.278 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1770.92 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2225-0457_X_j_dfm.log closed on Thu Mar 5 05:41:23 2020