! Started logfile: /image_prod/ug002_uva//J2225-0457_X_f_dfm.log on Thu Mar 5 05:40:58 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2225-0457_X_f_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2225-0457_X_f_uva.fits ! AN table 1: 18 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.865741 visibilities/baseline/integration-bin. ! Found source: J2225-0457 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 6732 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2225-0457_X_f] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.749656Jy sigma=8.012032 ! Fit after self-cal, rms=0.646587Jy sigma=2.466299 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6177 mas, bmaj=1.577 mas, bpa=-0.1269 degrees ! Estimated noise=2.44539 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.930088 Jy ! Component: 100 - total flux cleaned = 1.14351 Jy ! Total flux subtracted in 100 components = 1.14351 Jy ! Clean residual min=-0.073329 max=0.223351 Jy/beam ! Clean residual mean=0.000024 rms=0.017150 Jy/beam ! Combined flux in latest and established models = 1.14351 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 1.14351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.591253Jy sigma=2.277196 ! Fit after self-cal, rms=0.591179Jy sigma=2.276814 ! Inverting map ! Added new window around map position (2, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195242 Jy ! Component: 100 - total flux cleaned = 0.314657 Jy ! Total flux subtracted in 100 components = 0.314657 Jy ! Clean residual min=-0.062683 max=0.112145 Jy/beam ! Clean residual mean=0.000022 rms=0.012304 Jy/beam ! Combined flux in latest and established models = 1.45817 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 1.45817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.443056Jy sigma=1.668981 ! Fit after self-cal, rms=0.435089Jy sigma=1.647154 ! Inverting map ! Added new window around map position (2.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117464 Jy ! Component: 100 - total flux cleaned = 0.20789 Jy ! Total flux subtracted in 100 components = 0.20789 Jy ! Clean residual min=-0.058997 max=0.064246 Jy/beam ! Clean residual mean=0.000018 rms=0.009745 Jy/beam ! Combined flux in latest and established models = 1.66606 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 1.66606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.349578Jy sigma=1.323630 ! Fit after self-cal, rms=0.346377Jy sigma=1.313456 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0803929 Jy ! Component: 100 - total flux cleaned = 0.148897 Jy ! Total flux subtracted in 100 components = 0.148897 Jy ! Clean residual min=-0.052145 max=0.051797 Jy/beam ! Clean residual mean=0.000013 rms=0.008115 Jy/beam ! Combined flux in latest and established models = 1.81496 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 1.81496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.290226Jy sigma=1.111482 ! Fit after self-cal, rms=0.288993Jy sigma=1.108245 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7528 mas, bmaj=1.817 mas, bpa=-0.42 degrees ! Estimated noise=1.87703 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108429 Jy ! Component: 100 - total flux cleaned = 0.19126 Jy ! Component: 150 - total flux cleaned = 0.257224 Jy ! Component: 200 - total flux cleaned = 0.310517 Jy ! Total flux subtracted in 200 components = 0.310517 Jy ! Clean residual min=-0.035208 max=0.043703 Jy/beam ! Clean residual mean=0.000015 rms=0.008947 Jy/beam ! Combined flux in latest and established models = 2.12547 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 47 components and 2.12547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.192153Jy sigma=0.789218 ! Fit after self-cal, rms=0.189024Jy sigma=0.774881 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7528 x 1.817 at -0.42 degrees (North through East) ! Clean map min=-0.034268 max=1.2945 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.01 KP 1.02 ! LA 0.89 MK 1.04 NL 1.12 OV 0.91 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.01 KP 1.02 ! LA 0.89 MK 1.03 NL 1.11 OV 0.89 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.00 KP 1.03 ! LA 0.89 MK 1.04 NL 1.11 OV 0.90 ! SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.00 KP 1.03 ! LA 0.90 MK 1.04 NL 1.11 OV 0.89 ! SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.01 KP 1.03 ! LA 0.89 MK 1.04 NL 1.10 OV 0.89 ! SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.01 KP 1.02 ! LA 0.89 MK 1.03 NL 1.12 OV 0.89 ! SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.00 KP 1.01 ! LA 0.90 MK 1.05 NL 1.10 OV 0.90 ! SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.01 KP 1.02 ! LA 0.89 MK 1.02 NL 1.10 OV 0.90 ! SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.01 KP 1.02 ! LA 0.89 MK 1.03 NL 1.10 OV 0.90 ! SC 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.01 KP 1.04 ! LA 0.89 MK 1.04 NL 1.10 OV 0.88 ! SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.01 KP 1.02 ! LA 0.89 MK 1.04 NL 1.10 OV 0.88 ! SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.00 KP 1.01 ! LA 0.88 MK 1.04 NL 1.09 OV 0.89 ! SC 1.03 ! ! ! Fit before self-cal, rms=0.189024Jy sigma=0.774881 ! Fit after self-cal, rms=0.116201Jy sigma=0.499605 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7655 mas, bmaj=1.841 mas, bpa=-0.06152 degrees ! Estimated noise=1.83283 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0424011 Jy ! Component: 100 - total flux cleaned = 0.0663935 Jy ! Component: 150 - total flux cleaned = 0.0813303 Jy ! Component: 200 - total flux cleaned = 0.0889411 Jy ! Total flux subtracted in 200 components = 0.0889411 Jy ! Clean residual min=-0.015037 max=0.022255 Jy/beam ! Clean residual mean=0.000003 rms=0.003248 Jy/beam ! Combined flux in latest and established models = 2.21442 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 2.21442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094157Jy sigma=0.419141 ! Fit after self-cal, rms=0.092239Jy sigma=0.410067 ! Inverting map ! Added new window around map position (3.8, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196399 Jy ! Component: 100 - total flux cleaned = 0.0317267 Jy ! Component: 150 - total flux cleaned = 0.0392646 Jy ! Component: 200 - total flux cleaned = 0.0450494 Jy ! Total flux subtracted in 200 components = 0.0450494 Jy ! Clean residual min=-0.012832 max=0.014663 Jy/beam ! Clean residual mean=0.000001 rms=0.002705 Jy/beam ! Combined flux in latest and established models = 2.25947 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 79 components and 2.25947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085251Jy sigma=0.386151 ! Fit after self-cal, rms=0.084864Jy sigma=0.384683 ! Inverting map ! Added new window around map position (0.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00566789 Jy ! Component: 100 - total flux cleaned = 0.00836349 Jy ! Component: 150 - total flux cleaned = 0.00967309 Jy ! Component: 200 - total flux cleaned = 0.0108482 Jy ! Total flux subtracted in 200 components = 0.0108482 Jy ! Clean residual min=-0.011580 max=0.012249 Jy/beam ! Clean residual mean=-0.000000 rms=0.002463 Jy/beam ! Combined flux in latest and established models = 2.27031 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 101 components and 2.27031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080826Jy sigma=0.369379 ! Fit after self-cal, rms=0.080672Jy sigma=0.368160 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080672Jy sigma=0.368160 ! Fit after self-cal, rms=0.073084Jy sigma=0.340449 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7652 mas, bmaj=1.842 mas, bpa=-0.04674 degrees ! Estimated noise=1.8322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789621 Jy ! Component: 100 - total flux cleaned = 0.010741 Jy ! Component: 150 - total flux cleaned = 0.0122196 Jy ! Component: 200 - total flux cleaned = 0.013118 Jy ! Total flux subtracted in 200 components = 0.013118 Jy ! Clean residual min=-0.009686 max=0.011887 Jy/beam ! Clean residual mean=-0.000000 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 2.28343 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 115 components and 2.28343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070969Jy sigma=0.332083 ! Fit after self-cal, rms=0.070894Jy sigma=0.331640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.4, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114895 Jy ! Component: 100 - total flux cleaned = 0.0182499 Jy ! Component: 150 - total flux cleaned = 0.0228402 Jy ! Component: 200 - total flux cleaned = 0.0247249 Jy ! Total flux subtracted in 200 components = 0.0247249 Jy ! Clean residual min=-0.008261 max=0.007695 Jy/beam ! Clean residual mean=-0.000002 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 2.30816 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 126 components and 2.30816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068414Jy sigma=0.320747 ! Fit after self-cal, rms=0.068306Jy sigma=0.320150 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068306Jy sigma=0.320150 ! Fit after self-cal, rms=0.066401Jy sigma=0.312856 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7648 mas, bmaj=1.842 mas, bpa=-0.04034 degrees ! Estimated noise=1.83011 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483463 Jy ! Component: 100 - total flux cleaned = 0.00616614 Jy ! Component: 150 - total flux cleaned = 0.00667021 Jy ! Component: 200 - total flux cleaned = 0.00681376 Jy ! Total flux subtracted in 200 components = 0.00681376 Jy ! Clean residual min=-0.006659 max=0.007087 Jy/beam ! Clean residual mean=-0.000003 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 2.31497 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 135 components and 2.31497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065466Jy sigma=0.308895 ! Fit after self-cal, rms=0.065410Jy sigma=0.308752 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130865 Jy ! Component: 100 - total flux cleaned = 0.00145428 Jy ! Component: 150 - total flux cleaned = 0.00157874 Jy ! Component: 200 - total flux cleaned = 0.00207364 Jy ! Total flux subtracted in 200 components = 0.00207364 Jy ! Clean residual min=-0.006510 max=0.006286 Jy/beam ! Clean residual mean=-0.000003 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 2.31704 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 144 components and 2.31704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064881Jy sigma=0.306460 ! Fit after self-cal, rms=0.064845Jy sigma=0.306394 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064845Jy sigma=0.306394 ! Fit after self-cal, rms=0.064690Jy sigma=0.306077 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.812 mas, bmaj=3.184 mas, bpa=5.632 degrees ! Estimated noise=2.67715 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000745506 Jy ! Component: 100 - total flux cleaned = -0.000998549 Jy ! Component: 150 - total flux cleaned = -0.000991165 Jy ! Component: 200 - total flux cleaned = -0.00117928 Jy ! Total flux subtracted in 200 components = -0.00117928 Jy ! Clean residual min=-0.009093 max=0.010180 Jy/beam ! Clean residual mean=-0.000007 rms=0.002277 Jy/beam ! Combined flux in latest and established models = 2.31586 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 164 components and 2.31586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064515Jy sigma=0.305664 ! Fit after self-cal, rms=0.064487Jy sigma=0.305547 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (50, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00959665 Jy ! Component: 100 - total flux cleaned = 0.0132727 Jy ! Component: 150 - total flux cleaned = 0.0152044 Jy ! Component: 200 - total flux cleaned = 0.0165151 Jy ! Total flux subtracted in 200 components = 0.0165151 Jy ! Clean residual min=-0.007829 max=0.008225 Jy/beam ! Clean residual mean=-0.000010 rms=0.001964 Jy/beam ! Combined flux in latest and established models = 2.33238 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 216 components and 2.33238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063502Jy sigma=0.303197 ! Fit after self-cal, rms=0.063451Jy sigma=0.302949 ! Inverting map ! Added new window around map position (11.4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00733497 Jy ! Component: 100 - total flux cleaned = 0.0104037 Jy ! Component: 150 - total flux cleaned = 0.0123786 Jy ! Component: 200 - total flux cleaned = 0.0141708 Jy ! Total flux subtracted in 200 components = 0.0141708 Jy ! Clean residual min=-0.007408 max=0.006511 Jy/beam ! Clean residual mean=-0.000007 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 2.34655 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 249 components and 2.34655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062799Jy sigma=0.300516 ! Fit after self-cal, rms=0.062785Jy sigma=0.300358 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7645 mas, bmaj=1.842 mas, bpa=-0.05034 degrees ! Estimated noise=1.8301 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7645 x 1.842 at -0.05034 degrees (North through East) ! Clean map min=-0.0057825 max=1.2771 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062785Jy sigma=0.300358 ! Fit after self-cal, rms=0.060537Jy sigma=0.279318 ! Inverting map and beam ! Estimated beam: bmin=0.7643 mas, bmaj=1.842 mas, bpa=-0.06844 degrees ! Estimated noise=1.82983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358272 Jy ! Component: 100 - total flux cleaned = 0.00594929 Jy ! Component: 150 - total flux cleaned = 0.00781079 Jy ! Component: 200 - total flux cleaned = 0.00953058 Jy ! Total flux subtracted in 200 components = 0.00953058 Jy ! Clean residual min=-0.005305 max=0.004910 Jy/beam ! Clean residual mean=-0.000003 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 2.35608 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 262 components and 2.35608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059998Jy sigma=0.276692 ! Fit after self-cal, rms=0.059962Jy sigma=0.276633 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210996 Jy ! Component: 100 - total flux cleaned = 0.00334688 Jy ! Component: 150 - total flux cleaned = 0.0045283 Jy ! Component: 200 - total flux cleaned = 0.00566085 Jy ! Total flux subtracted in 200 components = 0.00566085 Jy ! Clean residual min=-0.005175 max=0.004802 Jy/beam ! Clean residual mean=-0.000003 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 2.36174 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 279 components and 2.36174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059664Jy sigma=0.275188 ! Fit after self-cal, rms=0.059641Jy sigma=0.275167 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059641Jy sigma=0.275167 ! Fit after self-cal, rms=0.059612Jy sigma=0.275017 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.625 mas, bmaj=1.589 mas, bpa=0.3152 degrees ! Estimated noise=2.40812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.914533 Jy ! Component: 100 - total flux cleaned = 1.17997 Jy ! Component: 150 - total flux cleaned = 1.35309 Jy ! Component: 200 - total flux cleaned = 1.48431 Jy ! Total flux subtracted in 200 components = 1.48431 Jy ! Clean residual min=-0.054464 max=0.077771 Jy/beam ! Clean residual mean=0.000024 rms=0.010147 Jy/beam ! Combined flux in latest and established models = 1.48431 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.48431 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7642 mas, bmaj=1.841 mas, bpa=-0.07326 degrees ! Estimated noise=1.82994 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172162 Jy ! Component: 100 - total flux cleaned = 0.29709 Jy ! Component: 150 - total flux cleaned = 0.392429 Jy ! Component: 200 - total flux cleaned = 0.466576 Jy ! Total flux subtracted in 200 components = 0.466576 Jy ! Clean residual min=-0.026156 max=0.043990 Jy/beam ! Clean residual mean=0.000018 rms=0.007170 Jy/beam ! Combined flux in latest and established models = 1.95088 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 44 components and 1.95088 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0594654 Jy ! Component: 100 - total flux cleaned = 0.107537 Jy ! Component: 150 - total flux cleaned = 0.146549 Jy ! Component: 200 - total flux cleaned = 0.178525 Jy ! Total flux subtracted in 200 components = 0.178525 Jy ! Clean residual min=-0.015891 max=0.020114 Jy/beam ! Clean residual mean=0.000006 rms=0.003802 Jy/beam ! Combined flux in latest and established models = 2.12941 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 54 components and 2.12941 Jy ! Inverting map ! Added new window around map position (2.2, -17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265419 Jy ! Component: 100 - total flux cleaned = 0.0486704 Jy ! Component: 150 - total flux cleaned = 0.0676226 Jy ! Component: 200 - total flux cleaned = 0.0839927 Jy ! Total flux subtracted in 200 components = 0.0839927 Jy ! Clean residual min=-0.011192 max=0.011513 Jy/beam ! Clean residual mean=0.000002 rms=0.002576 Jy/beam ! Combined flux in latest and established models = 2.2134 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 69 components and 2.2134 Jy ! Inverting map ! Added new window around map position (0.4, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145223 Jy ! Component: 100 - total flux cleaned = 0.0263757 Jy ! Component: 150 - total flux cleaned = 0.0366058 Jy ! Component: 200 - total flux cleaned = 0.0450876 Jy ! Total flux subtracted in 200 components = 0.0450876 Jy ! Clean residual min=-0.009298 max=0.008894 Jy/beam ! Clean residual mean=-0.000000 rms=0.002017 Jy/beam ! Combined flux in latest and established models = 2.25849 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 96 components and 2.25849 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.812 mas, bmaj=3.184 mas, bpa=5.64 degrees ! Estimated noise=2.67816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198216 Jy ! Component: 100 - total flux cleaned = 0.0341949 Jy ! Component: 150 - total flux cleaned = 0.0456715 Jy ! Component: 200 - total flux cleaned = 0.0540763 Jy ! Total flux subtracted in 200 components = 0.0540763 Jy ! Clean residual min=-0.010165 max=0.010850 Jy/beam ! Clean residual mean=-0.000004 rms=0.002481 Jy/beam ! Combined flux in latest and established models = 2.31257 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26.8, -32.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00946177 Jy ! Component: 100 - total flux cleaned = 0.0136596 Jy ! Component: 150 - total flux cleaned = 0.0173929 Jy ! Component: 200 - total flux cleaned = 0.0212418 Jy ! Total flux subtracted in 200 components = 0.0212418 Jy ! Clean residual min=-0.008098 max=0.006377 Jy/beam ! Clean residual mean=-0.000006 rms=0.001932 Jy/beam ! Combined flux in latest and established models = 2.33381 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 177 components and 2.33381 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7642 mas, bmaj=1.841 mas, bpa=-0.07326 degrees ! Estimated noise=1.82994 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000579898 Jy ! Component: 100 - total flux cleaned = 0.00181228 Jy ! Component: 150 - total flux cleaned = 0.00403361 Jy ! Component: 200 - total flux cleaned = 0.00646308 Jy ! Total flux subtracted in 200 components = 0.00646308 Jy ! Clean residual min=-0.005974 max=0.005665 Jy/beam ! Clean residual mean=-0.000002 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 2.34027 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 191 components and 2.34027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061124Jy sigma=0.284061 ! Fit after self-cal, rms=0.060791Jy sigma=0.282123 wmodel J2225-0457_X_f_map.mod ! Writing 191 model components to file: J2225-0457_X_f_map.mod wobs J2225-0457_X_f_uvs.fits ! Writing UV FITS file: J2225-0457_X_f_uvs.fits wwins J2225-0457_X_f_map.win ! wwins: Wrote 11 windows to J2225-0457_X_f_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.05991e-05 Jy ! Component: 100 - total flux cleaned = 0.000614803 Jy ! Component: 150 - total flux cleaned = 0.000893838 Jy ! Component: 200 - total flux cleaned = 0.00116042 Jy ! Component: 250 - total flux cleaned = 0.00124804 Jy ! Component: 300 - total flux cleaned = 0.00157704 Jy ! Component: 350 - total flux cleaned = 0.00173578 Jy ! Component: 400 - total flux cleaned = 0.00204278 Jy ! Component: 450 - total flux cleaned = 0.00219304 Jy ! Component: 500 - total flux cleaned = 0.00255715 Jy ! Component: 550 - total flux cleaned = 0.00248656 Jy ! Component: 600 - total flux cleaned = 0.00255607 Jy ! Component: 650 - total flux cleaned = 0.00275839 Jy ! Component: 700 - total flux cleaned = 0.00288903 Jy ! Component: 750 - total flux cleaned = 0.00288785 Jy ! Component: 800 - total flux cleaned = 0.0028255 Jy ! Component: 850 - total flux cleaned = 0.00313764 Jy ! Component: 900 - total flux cleaned = 0.00319884 Jy ! Component: 950 - total flux cleaned = 0.00319893 Jy ! Component: 1000 - total flux cleaned = 0.00337693 Jy ! Component: 1050 - total flux cleaned = 0.00343485 Jy ! Component: 1100 - total flux cleaned = 0.00366177 Jy ! Component: 1150 - total flux cleaned = 0.00366199 Jy ! Component: 1200 - total flux cleaned = 0.00388457 Jy ! Component: 1250 - total flux cleaned = 0.00415604 Jy ! Component: 1300 - total flux cleaned = 0.00420795 Jy ! Component: 1350 - total flux cleaned = 0.00431318 Jy ! Component: 1400 - total flux cleaned = 0.00462402 Jy ! Component: 1450 - total flux cleaned = 0.00493019 Jy ! Component: 1500 - total flux cleaned = 0.00487898 Jy ! Component: 1550 - total flux cleaned = 0.00507825 Jy ! Component: 1600 - total flux cleaned = 0.00507846 Jy ! Component: 1650 - total flux cleaned = 0.00522471 Jy ! Component: 1700 - total flux cleaned = 0.00551215 Jy ! Component: 1750 - total flux cleaned = 0.00546434 Jy ! Component: 1800 - total flux cleaned = 0.00551115 Jy ! Component: 1850 - total flux cleaned = 0.00569488 Jy ! Component: 1900 - total flux cleaned = 0.00578463 Jy ! Component: 1950 - total flux cleaned = 0.0056057 Jy ! Component: 2000 - total flux cleaned = 0.00573917 Jy ! Component: 2050 - total flux cleaned = 0.00573881 Jy ! Component: 2100 - total flux cleaned = 0.00569587 Jy ! Component: 2150 - total flux cleaned = 0.00578095 Jy ! Component: 2200 - total flux cleaned = 0.00573838 Jy ! Component: 2250 - total flux cleaned = 0.00582164 Jy ! Component: 2300 - total flux cleaned = 0.00565553 Jy ! Component: 2350 - total flux cleaned = 0.00577813 Jy ! Component: 2400 - total flux cleaned = 0.00585942 Jy ! Component: 2450 - total flux cleaned = 0.00585938 Jy ! Component: 2500 - total flux cleaned = 0.00597851 Jy ! Component: 2550 - total flux cleaned = 0.00582131 Jy ! Component: 2600 - total flux cleaned = 0.00609428 Jy ! Component: 2650 - total flux cleaned = 0.00605536 Jy ! Component: 2700 - total flux cleaned = 0.00605583 Jy ! Component: 2750 - total flux cleaned = 0.00620713 Jy ! Component: 2800 - total flux cleaned = 0.00583179 Jy ! Component: 2850 - total flux cleaned = 0.0059067 Jy ! Component: 2900 - total flux cleaned = 0.00586988 Jy ! Component: 2950 - total flux cleaned = 0.00579713 Jy ! Component: 3000 - total flux cleaned = 0.00590605 Jy ! Component: 3050 - total flux cleaned = 0.00586982 Jy ! Component: 3100 - total flux cleaned = 0.00572776 Jy ! Component: 3150 - total flux cleaned = 0.00579834 Jy ! Component: 3200 - total flux cleaned = 0.00583296 Jy ! Component: 3250 - total flux cleaned = 0.00590164 Jy ! Component: 3300 - total flux cleaned = 0.00566212 Jy ! Component: 3350 - total flux cleaned = 0.0055269 Jy ! Component: 3400 - total flux cleaned = 0.00556082 Jy ! Component: 3450 - total flux cleaned = 0.00546076 Jy ! Component: 3500 - total flux cleaned = 0.00542752 Jy ! Component: 3550 - total flux cleaned = 0.00555838 Jy ! Component: 3600 - total flux cleaned = 0.00565586 Jy ! Component: 3650 - total flux cleaned = 0.00562347 Jy ! Component: 3700 - total flux cleaned = 0.00555919 Jy ! Component: 3750 - total flux cleaned = 0.0055591 Jy ! Component: 3800 - total flux cleaned = 0.00559021 Jy ! Component: 3850 - total flux cleaned = 0.00552761 Jy ! Component: 3900 - total flux cleaned = 0.00558959 Jy ! Component: 3950 - total flux cleaned = 0.00552828 Jy ! Component: 4000 - total flux cleaned = 0.00555891 Jy ! Component: 4050 - total flux cleaned = 0.00552905 Jy ! Total flux subtracted in 4096 components = 0.0056494 Jy ! Clean residual min=-0.001888 max=0.001496 Jy/beam ! Clean residual mean=-0.000001 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 2.34592 Jy keep ! Adding 336 model components to the UV plane model. ! The established model now contains 526 components and 2.34592 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2225-0457_X_f_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7642 x 1.841 at -0.07326 degrees (North through East) ! Clean map min=-0.0027765 max=1.2789 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2225-0457_X_f_map.fits wmodel /image_prod/ug002_uva//J2225-0457_X_f_map.mod ! Writing 526 model components to file: /image_prod/ug002_uva//J2225-0457_X_f_map.mod wobs /image_prod/ug002_uva//J2225-0457_X_f_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2225-0457_X_f_uvs.fits wwins /image_prod/ug002_uva//J2225-0457_X_f_map.win ! wwins: Wrote 12 windows to /image_prod/ug002_uva//J2225-0457_X_f_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.27885 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00051465 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.120729 0.120729 0.241458 0.482916 0.965832 1.93166 3.86333 7.72666 15.4533 30.9066 61.8132 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.278 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2484.9 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2225-0457_X_f_dfm.log closed on Thu Mar 5 05:41:03 2020