! Started logfile: /image_prod/ug002_uva//J2225-0457_X_c_dfm.log on Thu Mar 5 05:40:46 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2225-0457_X_c_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2225-0457_X_c_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.745679 visibilities/baseline/integration-bin. ! Found source: J2225-0457 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 7248 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2225-0457_X_c] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.862679Jy sigma=7.679623 ! Fit after self-cal, rms=0.798801Jy sigma=2.747867 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6876 mas, bmaj=1.781 mas, bpa=-3.164 degrees ! Estimated noise=2.51504 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.935999 Jy ! Component: 100 - total flux cleaned = 1.17763 Jy ! Total flux subtracted in 100 components = 1.17763 Jy ! Clean residual min=-0.100605 max=0.269014 Jy/beam ! Clean residual mean=0.000138 rms=0.021237 Jy/beam ! Combined flux in latest and established models = 1.17763 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.17763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.719067Jy sigma=2.521916 ! Fit after self-cal, rms=0.718970Jy sigma=2.521614 ! Inverting map ! Added new window around map position (1.8, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.252835 Jy ! Component: 100 - total flux cleaned = 0.410976 Jy ! Total flux subtracted in 100 components = 0.410976 Jy ! Clean residual min=-0.073087 max=0.150524 Jy/beam ! Clean residual mean=0.000101 rms=0.014254 Jy/beam ! Combined flux in latest and established models = 1.58861 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 1.58861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.508560Jy sigma=1.741186 ! Fit after self-cal, rms=0.501710Jy sigma=1.701886 ! Inverting map ! Added new window around map position (2.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156466 Jy ! Component: 100 - total flux cleaned = 0.267909 Jy ! Total flux subtracted in 100 components = 0.267909 Jy ! Clean residual min=-0.054258 max=0.065978 Jy/beam ! Clean residual mean=0.000078 rms=0.010059 Jy/beam ! Combined flux in latest and established models = 1.85652 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 1.85652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.375225Jy sigma=1.258706 ! Fit after self-cal, rms=0.372404Jy sigma=1.240123 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0959737 Jy ! Component: 100 - total flux cleaned = 0.172445 Jy ! Total flux subtracted in 100 components = 0.172445 Jy ! Clean residual min=-0.042871 max=0.045814 Jy/beam ! Clean residual mean=0.000065 rms=0.007757 Jy/beam ! Combined flux in latest and established models = 2.02896 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 44 components and 2.02896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.298429Jy sigma=0.997648 ! Fit after self-cal, rms=0.297865Jy sigma=0.991574 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0658352 Jy ! Component: 100 - total flux cleaned = 0.119728 Jy ! Total flux subtracted in 100 components = 0.119728 Jy ! Clean residual min=-0.034788 max=0.032734 Jy/beam ! Clean residual mean=0.000056 rms=0.006438 Jy/beam ! Combined flux in latest and established models = 2.14869 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 2.14869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.251361Jy sigma=0.847764 ! Fit after self-cal, rms=0.251263Jy sigma=0.844514 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8644 mas, bmaj=2.07 mas, bpa=-2.279 degrees ! Estimated noise=1.90411 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0840873 Jy ! Component: 100 - total flux cleaned = 0.145787 Jy ! Component: 150 - total flux cleaned = 0.192897 Jy ! Component: 200 - total flux cleaned = 0.229444 Jy ! Total flux subtracted in 200 components = 0.229444 Jy ! Clean residual min=-0.038607 max=0.040160 Jy/beam ! Clean residual mean=0.000054 rms=0.008202 Jy/beam ! Combined flux in latest and established models = 2.37813 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 80 components and 2.37813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185268Jy sigma=0.664889 ! Fit after self-cal, rms=0.184516Jy sigma=0.657899 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8644 x 2.07 at -2.279 degrees (North through East) ! Clean map min=-0.03463 max=1.3265 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.02 KP 1.03 ! LA 1.01 MK 1.05 NL 1.07 OV 1.02 ! PT 0.86 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.01 KP 1.03 ! LA 0.98 MK 1.04 NL 1.07 OV 1.02 ! PT 0.84 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.00 KP 1.03 ! LA 0.99 MK 1.02 NL 1.06 OV 1.02 ! PT 0.85 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 KP 1.03 ! LA 0.99 MK 1.04 NL 1.07 OV 1.02 ! PT 0.85 SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.99 KP 1.04 ! LA 0.99 MK 1.02 NL 1.07 OV 1.03 ! PT 0.85 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.00 KP 1.03 ! LA 0.98 MK 1.04 NL 1.08 OV 1.04 ! PT 0.84 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.00 KP 1.03 ! LA 0.99 MK 1.03 NL 1.06 OV 1.03 ! PT 0.85 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 1.04 ! LA 0.98 MK 1.03 NL 1.07 OV 1.03 ! PT 0.85 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.98 KP 1.04 ! LA 1.00 MK 1.03 NL 1.07 OV 1.02 ! PT 0.85 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.99 KP 1.04 ! LA 0.99 MK 1.04 NL 1.06 OV 1.03 ! PT 0.86 SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.98 KP 1.03 ! LA 0.99 MK 1.04 NL 1.06 OV 1.02 ! PT 0.85 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.00 KP 0.97 ! LA 0.99 MK 1.04 NL 1.05 OV 1.03 ! PT 0.84 SC 1.02 ! ! ! Fit before self-cal, rms=0.184516Jy sigma=0.657899 ! Fit after self-cal, rms=0.095243Jy sigma=0.394882 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8752 mas, bmaj=2.085 mas, bpa=-2.052 degrees ! Estimated noise=1.89124 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0262692 Jy ! Component: 100 - total flux cleaned = 0.0363881 Jy ! Component: 150 - total flux cleaned = 0.0410129 Jy ! Component: 200 - total flux cleaned = 0.0448597 Jy ! Total flux subtracted in 200 components = 0.0448597 Jy ! Clean residual min=-0.010682 max=0.013953 Jy/beam ! Clean residual mean=0.000009 rms=0.002751 Jy/beam ! Combined flux in latest and established models = 2.42299 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 107 components and 2.42299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084699Jy sigma=0.357736 ! Fit after self-cal, rms=0.084068Jy sigma=0.355311 ! Inverting map ! Added new window around map position (5.8, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130873 Jy ! Component: 100 - total flux cleaned = 0.0168945 Jy ! Component: 150 - total flux cleaned = 0.019711 Jy ! Component: 200 - total flux cleaned = 0.0223468 Jy ! Total flux subtracted in 200 components = 0.0223468 Jy ! Clean residual min=-0.010040 max=0.010365 Jy/beam ! Clean residual mean=-0.000000 rms=0.002494 Jy/beam ! Combined flux in latest and established models = 2.44534 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 129 components and 2.44534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080746Jy sigma=0.343903 ! Fit after self-cal, rms=0.080621Jy sigma=0.343118 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080621Jy sigma=0.343118 ! Fit after self-cal, rms=0.074162Jy sigma=0.318776 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8746 mas, bmaj=2.085 mas, bpa=-2.052 degrees ! Estimated noise=1.88714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354442 Jy ! Component: 100 - total flux cleaned = 0.00605304 Jy ! Component: 150 - total flux cleaned = 0.00836118 Jy ! Component: 200 - total flux cleaned = 0.0100302 Jy ! Total flux subtracted in 200 components = 0.0100302 Jy ! Clean residual min=-0.007650 max=0.007888 Jy/beam ! Clean residual mean=-0.000012 rms=0.001923 Jy/beam ! Combined flux in latest and established models = 2.45537 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 149 components and 2.45537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072616Jy sigma=0.312046 ! Fit after self-cal, rms=0.072507Jy sigma=0.311689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189732 Jy ! Component: 100 - total flux cleaned = 0.00321631 Jy ! Component: 150 - total flux cleaned = 0.0045672 Jy ! Component: 200 - total flux cleaned = 0.00592477 Jy ! Total flux subtracted in 200 components = 0.00592477 Jy ! Clean residual min=-0.007574 max=0.007762 Jy/beam ! Clean residual mean=-0.000013 rms=0.001858 Jy/beam ! Combined flux in latest and established models = 2.4613 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 155 components and 2.46129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071852Jy sigma=0.309108 ! Fit after self-cal, rms=0.071831Jy sigma=0.308991 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071831Jy sigma=0.308991 ! Fit after self-cal, rms=0.071364Jy sigma=0.307287 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8745 mas, bmaj=2.085 mas, bpa=-2.036 degrees ! Estimated noise=1.88534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.43694e-05 Jy ! Component: 100 - total flux cleaned = 0.00142126 Jy ! Component: 150 - total flux cleaned = 0.00277752 Jy ! Component: 200 - total flux cleaned = 0.00352118 Jy ! Total flux subtracted in 200 components = 0.00352118 Jy ! Clean residual min=-0.007402 max=0.007672 Jy/beam ! Clean residual mean=-0.000013 rms=0.001771 Jy/beam ! Combined flux in latest and established models = 2.46482 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 168 components and 2.46482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070777Jy sigma=0.304780 ! Fit after self-cal, rms=0.070761Jy sigma=0.304671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (43.4, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00759764 Jy ! Component: 100 - total flux cleaned = 0.0127674 Jy ! Component: 150 - total flux cleaned = 0.0167297 Jy ! Component: 200 - total flux cleaned = 0.0194845 Jy ! Total flux subtracted in 200 components = 0.0194845 Jy ! Clean residual min=-0.007162 max=0.006840 Jy/beam ! Clean residual mean=-0.000007 rms=0.001606 Jy/beam ! Combined flux in latest and established models = 2.4843 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 201 components and 2.4843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069398Jy sigma=0.300556 ! Fit after self-cal, rms=0.069333Jy sigma=0.300365 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069333Jy sigma=0.300365 ! Fit after self-cal, rms=0.069081Jy sigma=0.299773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.008 mas, bmaj=3.412 mas, bpa=-0.3959 degrees ! Estimated noise=2.60592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00788643 Jy ! Component: 100 - total flux cleaned = 0.0131794 Jy ! Component: 150 - total flux cleaned = 0.017258 Jy ! Component: 200 - total flux cleaned = 0.0201426 Jy ! Total flux subtracted in 200 components = 0.0201426 Jy ! Clean residual min=-0.009964 max=0.010262 Jy/beam ! Clean residual mean=-0.000013 rms=0.002690 Jy/beam ! Combined flux in latest and established models = 2.50444 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 234 components and 2.50444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068628Jy sigma=0.298932 ! Fit after self-cal, rms=0.068602Jy sigma=0.298702 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283164 Jy ! Component: 100 - total flux cleaned = 0.00459049 Jy ! Component: 150 - total flux cleaned = 0.00602395 Jy ! Component: 200 - total flux cleaned = 0.00689073 Jy ! Total flux subtracted in 200 components = 0.00689073 Jy ! Clean residual min=-0.010007 max=0.010133 Jy/beam ! Clean residual mean=-0.000011 rms=0.002646 Jy/beam ! Combined flux in latest and established models = 2.51133 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 240 components and 2.51133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068549Jy sigma=0.298677 ! Fit after self-cal, rms=0.068565Jy sigma=0.298638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8746 mas, bmaj=2.085 mas, bpa=-2.03 degrees ! Estimated noise=1.88419 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8746 x 2.085 at -2.03 degrees (North through East) ! Clean map min=-0.0089057 max=1.3093 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068565Jy sigma=0.298638 ! Fit after self-cal, rms=0.066591Jy sigma=0.282039 ! Inverting map and beam ! Estimated beam: bmin=0.8744 mas, bmaj=2.085 mas, bpa=-2.035 degrees ! Estimated noise=1.88408 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000411008 Jy ! Component: 100 - total flux cleaned = -0.000187984 Jy ! Component: 150 - total flux cleaned = 0.000315554 Jy ! Component: 200 - total flux cleaned = 0.000697379 Jy ! Total flux subtracted in 200 components = 0.000697379 Jy ! Clean residual min=-0.006915 max=0.006049 Jy/beam ! Clean residual mean=-0.000007 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 2.51203 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 252 components and 2.51203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066296Jy sigma=0.280532 ! Fit after self-cal, rms=0.066278Jy sigma=0.280480 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000495306 Jy ! Component: 100 - total flux cleaned = 0.000498667 Jy ! Component: 150 - total flux cleaned = 0.000827713 Jy ! Component: 200 - total flux cleaned = 0.000982695 Jy ! Total flux subtracted in 200 components = 0.000982695 Jy ! Clean residual min=-0.006879 max=0.005970 Jy/beam ! Clean residual mean=-0.000007 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 2.51301 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 261 components and 2.51301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066096Jy sigma=0.279605 ! Fit after self-cal, rms=0.066089Jy sigma=0.279575 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066089Jy sigma=0.279575 ! Fit after self-cal, rms=0.066001Jy sigma=0.279395 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6938 mas, bmaj=1.786 mas, bpa=-2.927 degrees ! Estimated noise=2.51328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.930616 Jy ! Component: 100 - total flux cleaned = 1.24335 Jy ! Component: 150 - total flux cleaned = 1.46542 Jy ! Component: 200 - total flux cleaned = 1.63478 Jy ! Total flux subtracted in 200 components = 1.63478 Jy ! Clean residual min=-0.055414 max=0.098101 Jy/beam ! Clean residual mean=0.000077 rms=0.011628 Jy/beam ! Combined flux in latest and established models = 1.63478 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.63478 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8745 mas, bmaj=2.084 mas, bpa=-2.026 degrees ! Estimated noise=1.88365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202596 Jy ! Component: 100 - total flux cleaned = 0.342646 Jy ! Component: 150 - total flux cleaned = 0.445246 Jy ! Component: 200 - total flux cleaned = 0.521667 Jy ! Total flux subtracted in 200 components = 0.521667 Jy ! Clean residual min=-0.018515 max=0.043899 Jy/beam ! Clean residual mean=0.000036 rms=0.006482 Jy/beam ! Combined flux in latest and established models = 2.15645 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 54 components and 2.15645 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0571675 Jy ! Component: 100 - total flux cleaned = 0.100371 Jy ! Component: 150 - total flux cleaned = 0.133709 Jy ! Component: 200 - total flux cleaned = 0.160825 Jy ! Total flux subtracted in 200 components = 0.160825 Jy ! Clean residual min=-0.010416 max=0.016996 Jy/beam ! Clean residual mean=0.000011 rms=0.003399 Jy/beam ! Combined flux in latest and established models = 2.31728 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 85 components and 2.31728 Jy ! Inverting map ! Added new window around map position (10, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225387 Jy ! Component: 100 - total flux cleaned = 0.0412446 Jy ! Component: 150 - total flux cleaned = 0.0568391 Jy ! Component: 200 - total flux cleaned = 0.0699349 Jy ! Total flux subtracted in 200 components = 0.0699349 Jy ! Clean residual min=-0.008254 max=0.009921 Jy/beam ! Clean residual mean=-0.000003 rms=0.002398 Jy/beam ! Combined flux in latest and established models = 2.38721 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 105 components and 2.38721 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.008 mas, bmaj=3.41 mas, bpa=-0.3471 degrees ! Estimated noise=2.60618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212611 Jy ! Component: 100 - total flux cleaned = 0.0381574 Jy ! Component: 150 - total flux cleaned = 0.0521591 Jy ! Component: 200 - total flux cleaned = 0.0639646 Jy ! Total flux subtracted in 200 components = 0.0639646 Jy ! Clean residual min=-0.010994 max=0.015372 Jy/beam ! Clean residual mean=-0.000013 rms=0.003408 Jy/beam ! Combined flux in latest and established models = 2.45117 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (50.6, -16.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154641 Jy ! Component: 100 - total flux cleaned = 0.0253521 Jy ! Component: 150 - total flux cleaned = 0.0333863 Jy ! Component: 200 - total flux cleaned = 0.0401921 Jy ! Total flux subtracted in 200 components = 0.0401921 Jy ! Clean residual min=-0.008995 max=0.009118 Jy/beam ! Clean residual mean=-0.000018 rms=0.002606 Jy/beam ! Combined flux in latest and established models = 2.49137 Jy ! Adding 164 model components to the UV plane model. ! The established model now contains 247 components and 2.49137 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8745 mas, bmaj=2.084 mas, bpa=-2.026 degrees ! Estimated noise=1.88365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305328 Jy ! Component: 100 - total flux cleaned = 0.00624443 Jy ! Component: 150 - total flux cleaned = 0.00929318 Jy ! Component: 200 - total flux cleaned = 0.0118965 Jy ! Total flux subtracted in 200 components = 0.0118965 Jy ! Clean residual min=-0.006532 max=0.005854 Jy/beam ! Clean residual mean=-0.000008 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 2.50326 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 276 components and 2.50326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065325Jy sigma=0.279151 ! Fit after self-cal, rms=0.064843Jy sigma=0.276934 wmodel J2225-0457_X_c_map.mod ! Writing 276 model components to file: J2225-0457_X_c_map.mod wobs J2225-0457_X_c_uvs.fits ! Writing UV FITS file: J2225-0457_X_c_uvs.fits wwins J2225-0457_X_c_map.win ! wwins: Wrote 8 windows to J2225-0457_X_c_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.58203e-05 Jy ! Component: 100 - total flux cleaned = 0.000845629 Jy ! Component: 150 - total flux cleaned = 0.00165674 Jy ! Component: 200 - total flux cleaned = 0.00243716 Jy ! Component: 250 - total flux cleaned = 0.00285473 Jy ! Component: 300 - total flux cleaned = 0.003261 Jy ! Component: 350 - total flux cleaned = 0.00349835 Jy ! Component: 400 - total flux cleaned = 0.0036537 Jy ! Component: 450 - total flux cleaned = 0.00388009 Jy ! Component: 500 - total flux cleaned = 0.0039539 Jy ! Component: 550 - total flux cleaned = 0.00402591 Jy ! Component: 600 - total flux cleaned = 0.00409818 Jy ! Component: 650 - total flux cleaned = 0.00423736 Jy ! Component: 700 - total flux cleaned = 0.00437179 Jy ! Component: 750 - total flux cleaned = 0.00437094 Jy ! Component: 800 - total flux cleaned = 0.00443726 Jy ! Component: 850 - total flux cleaned = 0.00456621 Jy ! Component: 900 - total flux cleaned = 0.00481881 Jy ! Component: 950 - total flux cleaned = 0.00494065 Jy ! Component: 1000 - total flux cleaned = 0.00475796 Jy ! Component: 1050 - total flux cleaned = 0.00445868 Jy ! Component: 1100 - total flux cleaned = 0.00463737 Jy ! Component: 1150 - total flux cleaned = 0.00434631 Jy ! Component: 1200 - total flux cleaned = 0.00452029 Jy ! Component: 1250 - total flux cleaned = 0.00446337 Jy ! Component: 1300 - total flux cleaned = 0.00440707 Jy ! Component: 1350 - total flux cleaned = 0.00418437 Jy ! Component: 1400 - total flux cleaned = 0.00418399 Jy ! Component: 1450 - total flux cleaned = 0.00402188 Jy ! Component: 1500 - total flux cleaned = 0.00391433 Jy ! Component: 1550 - total flux cleaned = 0.00375498 Jy ! Component: 1600 - total flux cleaned = 0.00375616 Jy ! Component: 1650 - total flux cleaned = 0.0037051 Jy ! Component: 1700 - total flux cleaned = 0.00365408 Jy ! Component: 1750 - total flux cleaned = 0.00365377 Jy ! Component: 1800 - total flux cleaned = 0.00350373 Jy ! Component: 1850 - total flux cleaned = 0.00335534 Jy ! Component: 1900 - total flux cleaned = 0.00340362 Jy ! Component: 1950 - total flux cleaned = 0.00340381 Jy ! Component: 2000 - total flux cleaned = 0.00335618 Jy ! Component: 2050 - total flux cleaned = 0.00321333 Jy ! Component: 2100 - total flux cleaned = 0.00316578 Jy ! Component: 2150 - total flux cleaned = 0.00302663 Jy ! Component: 2200 - total flux cleaned = 0.00330292 Jy ! Component: 2250 - total flux cleaned = 0.00334838 Jy ! Component: 2300 - total flux cleaned = 0.00325797 Jy ! Component: 2350 - total flux cleaned = 0.00352619 Jy ! Component: 2400 - total flux cleaned = 0.00330489 Jy ! Component: 2450 - total flux cleaned = 0.00343603 Jy ! Component: 2500 - total flux cleaned = 0.0033923 Jy ! Component: 2550 - total flux cleaned = 0.00343477 Jy ! Component: 2600 - total flux cleaned = 0.00347792 Jy ! Component: 2650 - total flux cleaned = 0.00360367 Jy ! Component: 2700 - total flux cleaned = 0.00351956 Jy ! Component: 2750 - total flux cleaned = 0.00364417 Jy ! Component: 2800 - total flux cleaned = 0.00364341 Jy ! Component: 2850 - total flux cleaned = 0.00360268 Jy ! Component: 2900 - total flux cleaned = 0.00360282 Jy ! Component: 2950 - total flux cleaned = 0.00380327 Jy ! Component: 3000 - total flux cleaned = 0.00376299 Jy ! Component: 3050 - total flux cleaned = 0.00364456 Jy ! Component: 3100 - total flux cleaned = 0.00360547 Jy ! Component: 3150 - total flux cleaned = 0.00360586 Jy ! Component: 3200 - total flux cleaned = 0.00360572 Jy ! Component: 3250 - total flux cleaned = 0.00352962 Jy ! Component: 3300 - total flux cleaned = 0.00341661 Jy ! Component: 3350 - total flux cleaned = 0.00341664 Jy ! Component: 3400 - total flux cleaned = 0.00341612 Jy ! Component: 3450 - total flux cleaned = 0.003306 Jy ! Component: 3500 - total flux cleaned = 0.00326898 Jy ! Component: 3550 - total flux cleaned = 0.0032684 Jy ! Component: 3600 - total flux cleaned = 0.00305269 Jy ! Component: 3650 - total flux cleaned = 0.00287385 Jy ! Component: 3700 - total flux cleaned = 0.00280264 Jy ! Component: 3750 - total flux cleaned = 0.00287316 Jy ! Component: 3800 - total flux cleaned = 0.00273311 Jy ! Component: 3850 - total flux cleaned = 0.0026292 Jy ! Component: 3900 - total flux cleaned = 0.00259449 Jy ! Component: 3950 - total flux cleaned = 0.00252605 Jy ! Component: 4000 - total flux cleaned = 0.00252618 Jy ! Component: 4050 - total flux cleaned = 0.00235809 Jy ! Total flux subtracted in 4096 components = 0.00242525 Jy ! Clean residual min=-0.002609 max=0.001899 Jy/beam ! Clean residual mean=-0.000004 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 2.50569 Jy keep ! Adding 363 model components to the UV plane model. ! The established model now contains 639 components and 2.50569 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2225-0457_X_c_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8745 x 2.084 at -2.026 degrees (North through East) ! Clean map min=-0.0044563 max=1.3162 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2225-0457_X_c_map.fits wmodel /image_prod/ug002_uva//J2225-0457_X_c_map.mod ! Writing 639 model components to file: /image_prod/ug002_uva//J2225-0457_X_c_map.mod wobs /image_prod/ug002_uva//J2225-0457_X_c_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2225-0457_X_c_uvs.fits wwins /image_prod/ug002_uva//J2225-0457_X_c_map.win ! wwins: Wrote 9 windows to /image_prod/ug002_uva//J2225-0457_X_c_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.31623 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000621099 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.141563 0.141563 0.283126 0.566253 1.13251 2.26501 4.53002 9.06005 18.1201 36.2402 72.4804 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.316 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2119.19 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2225-0457_X_c_dfm.log closed on Thu Mar 5 05:40:51 2020