! Started logfile: /image_prod/ug002_uva//J2225-0457_S_d_dfm.log on Thu Mar  5 05:39:58 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2225-0457_S_d_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2225-0457_S_d_uva.fits
! AN table 1: 12 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.640741 visibilities/baseline/integration-bin.
! Found source: J2225-0457
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 1038 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2225-0457_S_d]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.304542Jy  sigma=7.921804
! Fit after  self-cal, rms=1.301511Jy  sigma=4.181725
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.48 mas, bmaj=6.526 mas, bpa=1.584 degrees
! Estimated noise=6.48841 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.34604 Jy
! Component: 100  -  total flux cleaned = 1.89935 Jy
! Total flux subtracted in 100 components = 1.89935 Jy
! Clean residual min=-0.103572 max=0.259423 Jy/beam
! Clean residual mean=0.000183 rms=0.033942 Jy/beam
! Combined flux in latest and established models = 1.89935 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 1.89935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.659702Jy  sigma=2.020975
! Fit after  self-cal, rms=0.654928Jy  sigma=2.007610
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.29423 Jy
! Component: 100  -  total flux cleaned = 0.454328 Jy
! Total flux subtracted in 100 components = 0.454328 Jy
! Clean residual min=-0.065743 max=0.131755 Jy/beam
! Clean residual mean=0.000017 rms=0.019463 Jy/beam
! Combined flux in latest and established models = 2.35367 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 2.35367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.419432Jy  sigma=1.238855
! Fit after  self-cal, rms=0.417993Jy  sigma=1.234761
! Inverting map 
! Added new window around map position (49.5, -15.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.127964 Jy
! Component: 100  -  total flux cleaned = 0.217192 Jy
! Total flux subtracted in 100 components = 0.217192 Jy
! Clean residual min=-0.051570 max=0.073355 Jy/beam
! Clean residual mean=0.000015 rms=0.015026 Jy/beam
! Combined flux in latest and established models = 2.57086 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 46 components and 2.57086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.332409Jy  sigma=0.990566
! Fit after  self-cal, rms=0.328663Jy  sigma=0.980312
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.841 mas, bmaj=7.195 mas, bpa=1.186 degrees
! Estimated noise=6.02864 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112382 Jy
! Component: 100  -  total flux cleaned = 0.192279 Jy
! Component: 150  -  total flux cleaned = 0.252842 Jy
! Component: 200  -  total flux cleaned = 0.299304 Jy
! Total flux subtracted in 200 components = 0.299304 Jy
! Clean residual min=-0.046924 max=0.060807 Jy/beam
! Clean residual mean=-0.000032 rms=0.014922 Jy/beam
! Combined flux in latest and established models = 2.87017 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 86 components and 2.87017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.249676Jy  sigma=0.773215
! Fit after  self-cal, rms=0.244471Jy  sigma=0.754635
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.841 x 7.195 at 1.186 degrees (North through East)
! Clean map  min=-0.04489  max=1.8093 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.02     KP        0.98     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.97     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     HN        1.02     KP        0.97     
!   LA        1.00     MK        1.01     NL        0.95     OV        1.01     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.02     HN        1.01     KP        0.98     
!   LA        0.97     MK        0.98     NL        1.01     OV        1.01     
!   PT        0.99     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.244471Jy  sigma=0.754635
! Fit after  self-cal, rms=0.218581Jy  sigma=0.683454
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.851 mas, bmaj=7.254 mas, bpa=1.001 degrees
! Estimated noise=6.00228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0412972 Jy
! Component: 100  -  total flux cleaned = 0.0667769 Jy
! Component: 150  -  total flux cleaned = 0.0746513 Jy
! Component: 200  -  total flux cleaned = 0.0780493 Jy
! Total flux subtracted in 200 components = 0.0780493 Jy
! Clean residual min=-0.041406 max=0.062065 Jy/beam
! Clean residual mean=-0.000013 rms=0.012268 Jy/beam
! Combined flux in latest and established models = 2.94822 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 100 components and 2.94822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.205682Jy  sigma=0.653132
! Fit after  self-cal, rms=0.204034Jy  sigma=0.648069
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.204034Jy  sigma=0.648069
! Fit after  self-cal, rms=0.185699Jy  sigma=0.576312
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.842 mas, bmaj=7.252 mas, bpa=0.9288 degrees
! Estimated noise=6.00689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156893 Jy
! Component: 100  -  total flux cleaned = 0.0182021 Jy
! Component: 150  -  total flux cleaned = 0.0198037 Jy
! Component: 200  -  total flux cleaned = 0.0215038 Jy
! Total flux subtracted in 200 components = 0.0215038 Jy
! Clean residual min=-0.032866 max=0.055046 Jy/beam
! Clean residual mean=-0.000017 rms=0.010457 Jy/beam
! Combined flux in latest and established models = 2.96972 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 107 components and 2.96972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.182563Jy  sigma=0.564714
! Fit after  self-cal, rms=0.182532Jy  sigma=0.563459
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (39.5, 22.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0466493 Jy
! Component: 100  -  total flux cleaned = 0.069882 Jy
! Component: 150  -  total flux cleaned = 0.0870608 Jy
! Component: 200  -  total flux cleaned = 0.100286 Jy
! Total flux subtracted in 200 components = 0.100286 Jy
! Clean residual min=-0.029484 max=0.038351 Jy/beam
! Clean residual mean=-0.000017 rms=0.009199 Jy/beam
! Combined flux in latest and established models = 3.07001 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 129 components and 3.07001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.165434Jy  sigma=0.510462
! Fit after  self-cal, rms=0.164655Jy  sigma=0.507876
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.164655Jy  sigma=0.507876
! Fit after  self-cal, rms=0.161982Jy  sigma=0.501966
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.843 mas, bmaj=7.259 mas, bpa=0.8982 degrees
! Estimated noise=6.00407 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181251 Jy
! Component: 100  -  total flux cleaned = 0.027296 Jy
! Component: 150  -  total flux cleaned = 0.0355966 Jy
! Component: 200  -  total flux cleaned = 0.0427941 Jy
! Total flux subtracted in 200 components = 0.0427941 Jy
! Clean residual min=-0.027342 max=0.037841 Jy/beam
! Clean residual mean=0.000010 rms=0.008595 Jy/beam
! Combined flux in latest and established models = 3.1128 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 150 components and 3.1128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.157764Jy  sigma=0.489635
! Fit after  self-cal, rms=0.157604Jy  sigma=0.488919
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-31.5, 75).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0339639 Jy
! Component: 100  -  total flux cleaned = 0.0514394 Jy
! Component: 150  -  total flux cleaned = 0.0640546 Jy
! Component: 200  -  total flux cleaned = 0.0744881 Jy
! Total flux subtracted in 200 components = 0.0744881 Jy
! Clean residual min=-0.026372 max=0.032017 Jy/beam
! Clean residual mean=-0.000011 rms=0.007916 Jy/beam
! Combined flux in latest and established models = 3.18729 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 183 components and 3.18729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.146464Jy  sigma=0.461077
! Fit after  self-cal, rms=0.145215Jy  sigma=0.458560
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.145215Jy  sigma=0.458560
! Fit after  self-cal, rms=0.144128Jy  sigma=0.453093
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.351 mas, bmaj=12.72 mas, bpa=1.983 degrees
! Estimated noise=9.11485 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0284278 Jy
! Component: 100  -  total flux cleaned = 0.0465687 Jy
! Component: 150  -  total flux cleaned = 0.0536931 Jy
! Component: 200  -  total flux cleaned = 0.0592615 Jy
! Total flux subtracted in 200 components = 0.0592615 Jy
! Clean residual min=-0.038327 max=0.068195 Jy/beam
! Clean residual mean=0.000005 rms=0.014178 Jy/beam
! Combined flux in latest and established models = 3.24655 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 202 components and 3.24655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.140839Jy  sigma=0.458968
! Fit after  self-cal, rms=0.140168Jy  sigma=0.456319
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (127.5, -36).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0569583 Jy
! Component: 100  -  total flux cleaned = 0.0802743 Jy
! Component: 150  -  total flux cleaned = 0.0953191 Jy
! Component: 200  -  total flux cleaned = 0.108441 Jy
! Total flux subtracted in 200 components = 0.108441 Jy
! Clean residual min=-0.031784 max=0.040017 Jy/beam
! Clean residual mean=0.000063 rms=0.011243 Jy/beam
! Combined flux in latest and established models = 3.35499 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 252 components and 3.35499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.125984Jy  sigma=0.441698
! Fit after  self-cal, rms=0.124445Jy  sigma=0.433373
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.84 mas, bmaj=7.259 mas, bpa=0.8326 degrees
! Estimated noise=5.99937 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.84 x 7.259 at 0.8326 degrees (North through East)
! Clean map  min=-0.022165  max=1.786 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.124445Jy  sigma=0.433373
! Fit after  self-cal, rms=0.119201Jy  sigma=0.408509
! Inverting map and beam 
! Estimated beam: bmin=2.832 mas, bmaj=7.255 mas, bpa=0.671 degrees
! Estimated noise=6.0063 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0186424 Jy
! Component: 100  -  total flux cleaned = 0.023585 Jy
! Component: 150  -  total flux cleaned = 0.0262662 Jy
! Component: 200  -  total flux cleaned = 0.0282849 Jy
! Total flux subtracted in 200 components = 0.0282849 Jy
! Clean residual min=-0.020254 max=0.024506 Jy/beam
! Clean residual mean=0.000032 rms=0.005991 Jy/beam
! Combined flux in latest and established models = 3.38328 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 288 components and 3.38328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.114571Jy  sigma=0.386849
! Fit after  self-cal, rms=0.114687Jy  sigma=0.385725
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00490907 Jy
! Component: 100  -  total flux cleaned = 0.00562291 Jy
! Component: 150  -  total flux cleaned = 0.0056263 Jy
! Component: 200  -  total flux cleaned = 0.00625703 Jy
! Total flux subtracted in 200 components = 0.00625703 Jy
! Clean residual min=-0.019572 max=0.023366 Jy/beam
! Clean residual mean=0.000031 rms=0.005789 Jy/beam
! Combined flux in latest and established models = 3.38953 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 310 components and 3.38953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112850Jy  sigma=0.376023
! Fit after  self-cal, rms=0.112937Jy  sigma=0.375806
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.112937Jy  sigma=0.375806
! Fit after  self-cal, rms=0.112090Jy  sigma=0.374019
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.472 mas, bmaj=6.562 mas, bpa=1.232 degrees
! Estimated noise=6.49757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.34371 Jy
! Component: 100  -  total flux cleaned = 1.89558 Jy
! Component: 150  -  total flux cleaned = 2.18625 Jy
! Component: 200  -  total flux cleaned = 2.36315 Jy
! Total flux subtracted in 200 components = 2.36315 Jy
! Clean residual min=-0.061554 max=0.103494 Jy/beam
! Clean residual mean=0.000040 rms=0.018305 Jy/beam
! Combined flux in latest and established models = 2.36315 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 2.36315 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.834 mas, bmaj=7.259 mas, bpa=0.7052 degrees
! Estimated noise=6.0132 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.169368 Jy
! Component: 100  -  total flux cleaned = 0.288967 Jy
! Component: 150  -  total flux cleaned = 0.37678 Jy
! Component: 200  -  total flux cleaned = 0.447653 Jy
! Total flux subtracted in 200 components = 0.447653 Jy
! Clean residual min=-0.041623 max=0.071495 Jy/beam
! Clean residual mean=0.000043 rms=0.013204 Jy/beam
! Combined flux in latest and established models = 2.8108 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 80 components and 2.81081 Jy
! Inverting map 
! Added new window around map position (3.5, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0686983 Jy
! Component: 100  -  total flux cleaned = 0.120548 Jy
! Component: 150  -  total flux cleaned = 0.165551 Jy
! Component: 200  -  total flux cleaned = 0.205404 Jy
! Total flux subtracted in 200 components = 0.205404 Jy
! Clean residual min=-0.029847 max=0.040504 Jy/beam
! Clean residual mean=0.000033 rms=0.009318 Jy/beam
! Combined flux in latest and established models = 3.01621 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 121 components and 3.01621 Jy
! Inverting map 
! Added new window around map position (53.5, -16).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0416308 Jy
! Component: 100  -  total flux cleaned = 0.0752195 Jy
! Component: 150  -  total flux cleaned = 0.105122 Jy
! Component: 200  -  total flux cleaned = 0.132074 Jy
! Total flux subtracted in 200 components = 0.132074 Jy
! Clean residual min=-0.023371 max=0.028426 Jy/beam
! Clean residual mean=0.000041 rms=0.007293 Jy/beam
! Combined flux in latest and established models = 3.14828 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 164 components and 3.14828 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.36 mas, bmaj=12.73 mas, bpa=1.937 degrees
! Estimated noise=9.143 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0525489 Jy
! Component: 100  -  total flux cleaned = 0.0935739 Jy
! Component: 150  -  total flux cleaned = 0.1276 Jy
! Component: 200  -  total flux cleaned = 0.156392 Jy
! Total flux subtracted in 200 components = 0.156392 Jy
! Clean residual min=-0.030205 max=0.033791 Jy/beam
! Clean residual mean=0.000117 rms=0.010620 Jy/beam
! Combined flux in latest and established models = 3.30468 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0246853 Jy
! Component: 100  -  total flux cleaned = 0.0460538 Jy
! Component: 150  -  total flux cleaned = 0.0632734 Jy
! Component: 200  -  total flux cleaned = 0.0772215 Jy
! Total flux subtracted in 200 components = 0.0772215 Jy
! Clean residual min=-0.027660 max=0.031670 Jy/beam
! Clean residual mean=0.000134 rms=0.009193 Jy/beam
! Combined flux in latest and established models = 3.3819 Jy
! Adding 145 model components to the UV plane model.
! The established model now contains 289 components and 3.3819 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.834 mas, bmaj=7.259 mas, bpa=0.7052 degrees
! Estimated noise=6.0132 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182208 Jy
! Component: 100  -  total flux cleaned = 0.0290724 Jy
! Component: 150  -  total flux cleaned = 0.0365461 Jy
! Component: 200  -  total flux cleaned = 0.0428387 Jy
! Total flux subtracted in 200 components = 0.0428387 Jy
! Clean residual min=-0.019853 max=0.021642 Jy/beam
! Clean residual mean=0.000050 rms=0.005131 Jy/beam
! Combined flux in latest and established models = 3.42473 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 328 components and 3.42473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.105232Jy  sigma=0.359067
! Fit after  self-cal, rms=0.102286Jy  sigma=0.350359
wmodel J2225-0457_S_d_map.mod
! Writing 328 model components to file: J2225-0457_S_d_map.mod
wobs   J2225-0457_S_d_uvs.fits
! Writing UV FITS file: J2225-0457_S_d_uvs.fits
wwins  J2225-0457_S_d_map.win
! wwins: Wrote 7 windows to J2225-0457_S_d_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00367275 Jy
! Component: 100  -  total flux cleaned = 0.00633026 Jy
! Component: 150  -  total flux cleaned = 0.00754833 Jy
! Component: 200  -  total flux cleaned = 0.0089933 Jy
! Component: 250  -  total flux cleaned = 0.0109406 Jy
! Component: 300  -  total flux cleaned = 0.0125348 Jy
! Component: 350  -  total flux cleaned = 0.0138054 Jy
! Component: 400  -  total flux cleaned = 0.0147805 Jy
! Component: 450  -  total flux cleaned = 0.0150134 Jy
! Component: 500  -  total flux cleaned = 0.0157009 Jy
! Component: 550  -  total flux cleaned = 0.0163606 Jy
! Component: 600  -  total flux cleaned = 0.0163541 Jy
! Component: 650  -  total flux cleaned = 0.0163498 Jy
! Component: 700  -  total flux cleaned = 0.0163512 Jy
! Component: 750  -  total flux cleaned = 0.0167422 Jy
! Component: 800  -  total flux cleaned = 0.0165558 Jy
! Component: 850  -  total flux cleaned = 0.0167436 Jy
! Component: 900  -  total flux cleaned = 0.0165691 Jy
! Component: 950  -  total flux cleaned = 0.016913 Jy
! Component: 1000  -  total flux cleaned = 0.0165699 Jy
! Component: 1050  -  total flux cleaned = 0.0168989 Jy
! Component: 1100  -  total flux cleaned = 0.0167361 Jy
! Component: 1150  -  total flux cleaned = 0.0165762 Jy
! Component: 1200  -  total flux cleaned = 0.0164197 Jy
! Component: 1250  -  total flux cleaned = 0.016271 Jy
! Component: 1300  -  total flux cleaned = 0.0162723 Jy
! Component: 1350  -  total flux cleaned = 0.016561 Jy
! Component: 1400  -  total flux cleaned = 0.0162797 Jy
! Component: 1450  -  total flux cleaned = 0.0165573 Jy
! Component: 1500  -  total flux cleaned = 0.0169613 Jy
! Component: 1550  -  total flux cleaned = 0.0168239 Jy
! Component: 1600  -  total flux cleaned = 0.0165603 Jy
! Component: 1650  -  total flux cleaned = 0.0160492 Jy
! Component: 1700  -  total flux cleaned = 0.0163018 Jy
! Component: 1750  -  total flux cleaned = 0.0167966 Jy
! Component: 1800  -  total flux cleaned = 0.016673 Jy
! Component: 1850  -  total flux cleaned = 0.0170286 Jy
! Component: 1900  -  total flux cleaned = 0.0169108 Jy
! Component: 1950  -  total flux cleaned = 0.0171393 Jy
! Component: 2000  -  total flux cleaned = 0.0175908 Jy
! Component: 2050  -  total flux cleaned = 0.0173714 Jy
! Component: 2100  -  total flux cleaned = 0.0178114 Jy
! Component: 2150  -  total flux cleaned = 0.0181318 Jy
! Component: 2200  -  total flux cleaned = 0.0185529 Jy
! Component: 2250  -  total flux cleaned = 0.0188651 Jy
! Component: 2300  -  total flux cleaned = 0.0192749 Jy
! Component: 2350  -  total flux cleaned = 0.0194775 Jy
! Component: 2400  -  total flux cleaned = 0.0198745 Jy
! Component: 2450  -  total flux cleaned = 0.02007 Jy
! Component: 2500  -  total flux cleaned = 0.0203608 Jy
! Component: 2550  -  total flux cleaned = 0.0209288 Jy
! Component: 2600  -  total flux cleaned = 0.021022 Jy
! Component: 2650  -  total flux cleaned = 0.0210239 Jy
! Component: 2700  -  total flux cleaned = 0.0215673 Jy
! Component: 2750  -  total flux cleaned = 0.0216561 Jy
! Component: 2800  -  total flux cleaned = 0.02192 Jy
! Component: 2850  -  total flux cleaned = 0.0221797 Jy
! Component: 2900  -  total flux cleaned = 0.0224378 Jy
! Component: 2950  -  total flux cleaned = 0.0228621 Jy
! Component: 3000  -  total flux cleaned = 0.0227777 Jy
! Component: 3050  -  total flux cleaned = 0.0233572 Jy
! Component: 3100  -  total flux cleaned = 0.0240103 Jy
! Component: 3150  -  total flux cleaned = 0.023606 Jy
! Component: 3200  -  total flux cleaned = 0.0239258 Jy
! Component: 3250  -  total flux cleaned = 0.0241641 Jy
! Component: 3300  -  total flux cleaned = 0.0243199 Jy
! Component: 3350  -  total flux cleaned = 0.0243977 Jy
! Component: 3400  -  total flux cleaned = 0.0245497 Jy
! Component: 3450  -  total flux cleaned = 0.0246253 Jy
! Component: 3500  -  total flux cleaned = 0.0249956 Jy
! Component: 3550  -  total flux cleaned = 0.0252162 Jy
! Component: 3600  -  total flux cleaned = 0.0254325 Jy
! Component: 3650  -  total flux cleaned = 0.0255053 Jy
! Component: 3700  -  total flux cleaned = 0.0255763 Jy
! Component: 3750  -  total flux cleaned = 0.0258571 Jy
! Component: 3800  -  total flux cleaned = 0.0260644 Jy
! Component: 3850  -  total flux cleaned = 0.0264083 Jy
! Component: 3900  -  total flux cleaned = 0.0268829 Jy
! Component: 3950  -  total flux cleaned = 0.0270842 Jy
! Component: 4000  -  total flux cleaned = 0.0273497 Jy
! Component: 4050  -  total flux cleaned = 0.0275481 Jy
! Total flux subtracted in 4096 components = 0.027809 Jy
! Clean residual min=-0.004111 max=0.004798 Jy/beam
! Clean residual mean=0.000006 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 3.45254 Jy
keep
! Adding 394 model components to the UV plane model.
! The established model now contains 721 components and 3.45254 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2225-0457_S_d_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.834 x 7.259 at 0.7052 degrees (North through East)
! Clean map  min=-0.011463  max=1.7876 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2225-0457_S_d_map.fits
wmodel /image_prod/ug002_uva//J2225-0457_S_d_map.mod
! Writing 721 model components to file: /image_prod/ug002_uva//J2225-0457_S_d_map.mod
wobs   /image_prod/ug002_uva//J2225-0457_S_d_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2225-0457_S_d_uvs.fits
wwins  /image_prod/ug002_uva//J2225-0457_S_d_map.win
! wwins: Wrote 8 windows to /image_prod/ug002_uva//J2225-0457_S_d_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.78755 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00127212 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.213496 0.213496 0.426992 0.853984 1.70797 3.41593 6.83187 13.6637 27.3275 54.655
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0038 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.787 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1405.18 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2225-0457_S_d_dfm.log closed on Thu Mar  5 05:40:02 2020