! Started logfile: /image_prod/ug002_uva//J2225-0457_S_a_dfm.log on Thu Mar  5 05:39:44 2020
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /image_prod/ug002_uva//J2225-0457_S_a_uva.fits
! Reading UV FITS file: /image_prod/ug002_uva//J2225-0457_S_a_uva.fits
! AN table 1: 12 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.747685 visibilities/baseline/integration-bin.
! Found source: J2225-0457
! 
! There are 3 IFs, and a total of 3 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 40 lines of history.
! 
! Reading 969 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 3 channels.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2225-0457_S_a]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 23 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.712718Jy  sigma=8.543264
! Fit after  self-cal, rms=1.671501Jy  sigma=4.760105
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.805 mas, bmaj=16.75 mas, bpa=-16.89 degrees
! Estimated noise=7.69391 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.65766 Jy
! Component: 100  -  total flux cleaned = 2.24073 Jy
! Total flux subtracted in 100 components = 2.24073 Jy
! Clean residual min=-0.145768 max=0.250986 Jy/beam
! Clean residual mean=-0.000012 rms=0.041169 Jy/beam
! Combined flux in latest and established models = 2.24073 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 2.24073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.832481Jy  sigma=1.852524
! Fit after  self-cal, rms=0.832285Jy  sigma=1.851499
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.263532 Jy
! Component: 100  -  total flux cleaned = 0.352773 Jy
! Total flux subtracted in 100 components = 0.352773 Jy
! Clean residual min=-0.103066 max=0.202060 Jy/beam
! Clean residual mean=-0.000135 rms=0.027821 Jy/beam
! Combined flux in latest and established models = 2.59351 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 2.59351 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.717851Jy  sigma=1.506354
! Fit after  self-cal, rms=0.717448Jy  sigma=1.505335
! Inverting map 
! Added new window around map position (49, -16).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.181506 Jy
! Component: 100  -  total flux cleaned = 0.276048 Jy
! Total flux subtracted in 100 components = 0.276048 Jy
! Clean residual min=-0.074532 max=0.085915 Jy/beam
! Clean residual mean=-0.000161 rms=0.020789 Jy/beam
! Combined flux in latest and established models = 2.86955 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 36 components and 2.86955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.638570Jy  sigma=1.200198
! Fit after  self-cal, rms=0.632638Jy  sigma=1.179852
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.385 mas, bmaj=16.8 mas, bpa=-16.76 degrees
! Estimated noise=6.93445 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11247 Jy
! Component: 100  -  total flux cleaned = 0.182693 Jy
! Component: 150  -  total flux cleaned = 0.223058 Jy
! Component: 200  -  total flux cleaned = 0.255781 Jy
! Total flux subtracted in 200 components = 0.255781 Jy
! Clean residual min=-0.075250 max=0.087088 Jy/beam
! Clean residual mean=-0.000251 rms=0.019395 Jy/beam
! Combined flux in latest and established models = 3.12533 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 70 components and 3.12533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.587498Jy  sigma=1.049780
! Fit after  self-cal, rms=0.585173Jy  sigma=1.041029
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.385 x 16.8 at -16.76 degrees (North through East)
! Clean map  min=-0.07928  max=2.2114 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     HN        1.04     KP        0.99     
!   LA        1.03     MK        1.05     NL        0.96     OV        1.00     
!   PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.79     FD        0.98     HN        1.04     KP        1.00     
!   LA        1.03     MK        0.93     NL        0.95     OV        1.00     
!   PT        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00     HN        1.03     KP        0.99     
!   LA        1.03     MK        0.99     NL        0.92     OV        1.01     
!   PT        1.01     
! 
! 
! Fit before self-cal, rms=0.585173Jy  sigma=1.041029
! Fit after  self-cal, rms=0.418301Jy  sigma=0.898263
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.389 mas, bmaj=16.67 mas, bpa=-16.86 degrees
! Estimated noise=6.89211 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0529459 Jy
! Component: 100  -  total flux cleaned = 0.0794435 Jy
! Component: 150  -  total flux cleaned = 0.102231 Jy
! Component: 200  -  total flux cleaned = 0.118158 Jy
! Total flux subtracted in 200 components = 0.118158 Jy
! Clean residual min=-0.055445 max=0.063312 Jy/beam
! Clean residual mean=-0.000257 rms=0.016119 Jy/beam
! Combined flux in latest and established models = 3.24349 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 87 components and 3.24349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.399198Jy  sigma=0.848639
! Fit after  self-cal, rms=0.398508Jy  sigma=0.845384
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.398508Jy  sigma=0.845384
! Fit after  self-cal, rms=0.173186Jy  sigma=0.500393
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.412 mas, bmaj=16.25 mas, bpa=-16.79 degrees
! Estimated noise=6.86741 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.032875 Jy
! Component: 100  -  total flux cleaned = 0.050501 Jy
! Component: 150  -  total flux cleaned = 0.0597741 Jy
! Component: 200  -  total flux cleaned = 0.0638936 Jy
! Total flux subtracted in 200 components = 0.0638936 Jy
! Clean residual min=-0.040716 max=0.041087 Jy/beam
! Clean residual mean=-0.000118 rms=0.010402 Jy/beam
! Combined flux in latest and established models = 3.30739 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 112 components and 3.30739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.162345Jy  sigma=0.475094
! Fit after  self-cal, rms=0.161834Jy  sigma=0.472479
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0072841 Jy
! Component: 100  -  total flux cleaned = 0.0115867 Jy
! Component: 150  -  total flux cleaned = 0.0144885 Jy
! Component: 200  -  total flux cleaned = 0.0167313 Jy
! Total flux subtracted in 200 components = 0.0167313 Jy
! Clean residual min=-0.038410 max=0.036583 Jy/beam
! Clean residual mean=-0.000130 rms=0.010110 Jy/beam
! Combined flux in latest and established models = 3.32412 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 126 components and 3.32412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.157914Jy  sigma=0.463078
! Fit after  self-cal, rms=0.157898Jy  sigma=0.462389
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.157898Jy  sigma=0.462389
! Fit after  self-cal, rms=0.156071Jy  sigma=0.457734
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.408 mas, bmaj=16.21 mas, bpa=-16.79 degrees
! Estimated noise=6.8612 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160195 Jy
! Component: 100  -  total flux cleaned = 0.0223283 Jy
! Component: 150  -  total flux cleaned = 0.0266652 Jy
! Component: 200  -  total flux cleaned = 0.0286673 Jy
! Total flux subtracted in 200 components = 0.0286673 Jy
! Clean residual min=-0.037254 max=0.034166 Jy/beam
! Clean residual mean=-0.000111 rms=0.009801 Jy/beam
! Combined flux in latest and established models = 3.35278 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 141 components and 3.35278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.152322Jy  sigma=0.449938
! Fit after  self-cal, rms=0.152334Jy  sigma=0.449497
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00250128 Jy
! Component: 100  -  total flux cleaned = 0.00438028 Jy
! Component: 150  -  total flux cleaned = 0.00580603 Jy
! Component: 200  -  total flux cleaned = 0.00717013 Jy
! Total flux subtracted in 200 components = 0.00717013 Jy
! Clean residual min=-0.036303 max=0.034029 Jy/beam
! Clean residual mean=-0.000115 rms=0.009658 Jy/beam
! Combined flux in latest and established models = 3.35995 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 152 components and 3.35995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.150404Jy  sigma=0.444367
! Fit after  self-cal, rms=0.150411Jy  sigma=0.444097
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.150411Jy  sigma=0.444097
! Fit after  self-cal, rms=0.150314Jy  sigma=0.442860
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.425 mas, bmaj=16.4 mas, bpa=-13.46 degrees
! Estimated noise=8.80898 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0230371 Jy
! Component: 100  -  total flux cleaned = 0.0296742 Jy
! Component: 150  -  total flux cleaned = 0.033506 Jy
! Component: 200  -  total flux cleaned = 0.0353647 Jy
! Total flux subtracted in 200 components = 0.0353647 Jy
! Clean residual min=-0.050013 max=0.050335 Jy/beam
! Clean residual mean=-0.000206 rms=0.014771 Jy/beam
! Combined flux in latest and established models = 3.39532 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 167 components and 3.39532 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.148149Jy  sigma=0.444081
! Fit after  self-cal, rms=0.148037Jy  sigma=0.442182
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00248896 Jy
! Component: 100  -  total flux cleaned = 0.00503543 Jy
! Component: 150  -  total flux cleaned = 0.00504558 Jy
! Component: 200  -  total flux cleaned = 0.00564386 Jy
! Total flux subtracted in 200 components = 0.00564386 Jy
! Clean residual min=-0.048764 max=0.050302 Jy/beam
! Clean residual mean=-0.000213 rms=0.014706 Jy/beam
! Combined flux in latest and established models = 3.40096 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 173 components and 3.40096 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.147340Jy  sigma=0.443056
! Fit after  self-cal, rms=0.147243Jy  sigma=0.442468
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.404 mas, bmaj=16.19 mas, bpa=-16.78 degrees
! Estimated noise=6.86063 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.404 x 16.19 at -16.78 degrees (North through East)
! Clean map  min=-0.031409  max=2.1807 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.147243Jy  sigma=0.442468
! Fit after  self-cal, rms=0.146196Jy  sigma=0.432120
! Inverting map and beam 
! Estimated beam: bmin=3.398 mas, bmaj=16.18 mas, bpa=-16.78 degrees
! Estimated noise=6.85732 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00393012 Jy
! Component: 100  -  total flux cleaned = -0.00198825 Jy
! Component: 150  -  total flux cleaned = 6.42985e-05 Jy
! Component: 200  -  total flux cleaned = 0.00192004 Jy
! Total flux subtracted in 200 components = 0.00192004 Jy
! Clean residual min=-0.031985 max=0.035573 Jy/beam
! Clean residual mean=-0.000094 rms=0.009283 Jy/beam
! Combined flux in latest and established models = 3.40288 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 192 components and 3.40288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.144412Jy  sigma=0.424047
! Fit after  self-cal, rms=0.144283Jy  sigma=0.423816
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00038174 Jy
! Component: 100  -  total flux cleaned = 0.000151607 Jy
! Component: 150  -  total flux cleaned = 0.000914094 Jy
! Component: 200  -  total flux cleaned = 0.00162032 Jy
! Total flux subtracted in 200 components = 0.00162032 Jy
! Clean residual min=-0.032177 max=0.035193 Jy/beam
! Clean residual mean=-0.000096 rms=0.009216 Jy/beam
! Combined flux in latest and established models = 3.4045 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 201 components and 3.4045 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143410Jy  sigma=0.420353
! Fit after  self-cal, rms=0.143278Jy  sigma=0.420240
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.143278Jy  sigma=0.420240
! Fit after  self-cal, rms=0.143187Jy  sigma=0.419439
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.823 mas, bmaj=16.29 mas, bpa=-16.95 degrees
! Estimated noise=7.60107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.63339 Jy
! Component: 100  -  total flux cleaned = 2.20173 Jy
! Component: 150  -  total flux cleaned = 2.48132 Jy
! Component: 200  -  total flux cleaned = 2.66218 Jy
! Total flux subtracted in 200 components = 2.66218 Jy
! Clean residual min=-0.075378 max=0.098135 Jy/beam
! Clean residual mean=0.000114 rms=0.020228 Jy/beam
! Combined flux in latest and established models = 2.66217 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 2.66217 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.393 mas, bmaj=16.17 mas, bpa=-16.77 degrees
! Estimated noise=6.85803 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.155098 Jy
! Component: 100  -  total flux cleaned = 0.266217 Jy
! Component: 150  -  total flux cleaned = 0.353133 Jy
! Component: 200  -  total flux cleaned = 0.42304 Jy
! Total flux subtracted in 200 components = 0.42304 Jy
! Clean residual min=-0.052128 max=0.050187 Jy/beam
! Clean residual mean=0.000092 rms=0.014749 Jy/beam
! Combined flux in latest and established models = 3.08522 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 70 components and 3.08521 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.405 mas, bmaj=16.39 mas, bpa=-13.43 degrees
! Estimated noise=8.83534 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0934822 Jy
! Component: 100  -  total flux cleaned = 0.162037 Jy
! Component: 150  -  total flux cleaned = 0.210169 Jy
! Component: 200  -  total flux cleaned = 0.238161 Jy
! Total flux subtracted in 200 components = 0.238161 Jy
! Clean residual min=-0.060864 max=0.055546 Jy/beam
! Clean residual mean=-0.000090 rms=0.016703 Jy/beam
! Combined flux in latest and established models = 3.32338 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0231593 Jy
! Component: 100  -  total flux cleaned = 0.0424827 Jy
! Component: 150  -  total flux cleaned = 0.0576555 Jy
! Component: 200  -  total flux cleaned = 0.0696546 Jy
! Total flux subtracted in 200 components = 0.0696546 Jy
! Clean residual min=-0.055345 max=0.047438 Jy/beam
! Clean residual mean=-0.000178 rms=0.015260 Jy/beam
! Combined flux in latest and established models = 3.39303 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 150 components and 3.39303 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.393 mas, bmaj=16.17 mas, bpa=-16.77 degrees
! Estimated noise=6.85803 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00696733 Jy
! Component: 100  -  total flux cleaned = 0.00955299 Jy
! Component: 150  -  total flux cleaned = 0.0123693 Jy
! Component: 200  -  total flux cleaned = 0.0134042 Jy
! Total flux subtracted in 200 components = 0.0134042 Jy
! Clean residual min=-0.034625 max=0.037293 Jy/beam
! Clean residual mean=-0.000111 rms=0.010034 Jy/beam
! Combined flux in latest and established models = 3.40643 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 179 components and 3.40644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Fit before self-cal, rms=0.151145Jy  sigma=0.468342
! Fit after  self-cal, rms=0.150888Jy  sigma=0.462175
wmodel J2225-0457_S_a_map.mod
! Writing 179 model components to file: J2225-0457_S_a_map.mod
wobs   J2225-0457_S_a_uvs.fits
! Writing UV FITS file: J2225-0457_S_a_uvs.fits
wwins  J2225-0457_S_a_map.win
! wwins: Wrote 2 windows to J2225-0457_S_a_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164833 Jy
! Component: 100  -  total flux cleaned = 0.0237965 Jy
! Component: 150  -  total flux cleaned = 0.0255101 Jy
! Component: 200  -  total flux cleaned = 0.0265593 Jy
! Component: 250  -  total flux cleaned = 0.0285509 Jy
! Component: 300  -  total flux cleaned = 0.0314229 Jy
! Component: 350  -  total flux cleaned = 0.0341899 Jy
! Component: 400  -  total flux cleaned = 0.0372892 Jy
! Component: 450  -  total flux cleaned = 0.0394193 Jy
! Component: 500  -  total flux cleaned = 0.0414751 Jy
! Component: 550  -  total flux cleaned = 0.043856 Jy
! Component: 600  -  total flux cleaned = 0.0457589 Jy
! Component: 650  -  total flux cleaned = 0.0479778 Jy
! Component: 700  -  total flux cleaned = 0.0497602 Jy
! Component: 750  -  total flux cleaned = 0.0511371 Jy
! Component: 800  -  total flux cleaned = 0.0514743 Jy
! Component: 850  -  total flux cleaned = 0.0514763 Jy
! Component: 900  -  total flux cleaned = 0.0511629 Jy
! Component: 950  -  total flux cleaned = 0.0511695 Jy
! Component: 1000  -  total flux cleaned = 0.0505784 Jy
! Component: 1050  -  total flux cleaned = 0.0505859 Jy
! Component: 1100  -  total flux cleaned = 0.0500166 Jy
! Component: 1150  -  total flux cleaned = 0.0489297 Jy
! Component: 1200  -  total flux cleaned = 0.0489355 Jy
! Component: 1250  -  total flux cleaned = 0.0484097 Jy
! Component: 1300  -  total flux cleaned = 0.0473941 Jy
! Component: 1350  -  total flux cleaned = 0.0469105 Jy
! Component: 1400  -  total flux cleaned = 0.0464311 Jy
! Component: 1450  -  total flux cleaned = 0.046429 Jy
! Component: 1500  -  total flux cleaned = 0.0457341 Jy
! Component: 1550  -  total flux cleaned = 0.0446045 Jy
! Component: 1600  -  total flux cleaned = 0.0439387 Jy
! Component: 1650  -  total flux cleaned = 0.0437186 Jy
! Component: 1700  -  total flux cleaned = 0.0424467 Jy
! Component: 1750  -  total flux cleaned = 0.0422407 Jy
! Component: 1800  -  total flux cleaned = 0.042241 Jy
! Component: 1850  -  total flux cleaned = 0.0418432 Jy
! Component: 1900  -  total flux cleaned = 0.0420345 Jy
! Component: 1950  -  total flux cleaned = 0.0410799 Jy
! Component: 2000  -  total flux cleaned = 0.0407035 Jy
! Component: 2050  -  total flux cleaned = 0.0399658 Jy
! Component: 2100  -  total flux cleaned = 0.0396068 Jy
! Component: 2150  -  total flux cleaned = 0.0392518 Jy
! Component: 2200  -  total flux cleaned = 0.0390804 Jy
! Component: 2250  -  total flux cleaned = 0.0389044 Jy
! Component: 2300  -  total flux cleaned = 0.0378981 Jy
! Component: 2350  -  total flux cleaned = 0.0375671 Jy
! Component: 2400  -  total flux cleaned = 0.0365969 Jy
! Component: 2450  -  total flux cleaned = 0.0365966 Jy
! Component: 2500  -  total flux cleaned = 0.0362805 Jy
! Component: 2550  -  total flux cleaned = 0.036128 Jy
! Component: 2600  -  total flux cleaned = 0.0358213 Jy
! Component: 2650  -  total flux cleaned = 0.03537 Jy
! Component: 2700  -  total flux cleaned = 0.0350771 Jy
! Component: 2750  -  total flux cleaned = 0.0350782 Jy
! Component: 2800  -  total flux cleaned = 0.0345077 Jy
! Component: 2850  -  total flux cleaned = 0.0343683 Jy
! Component: 2900  -  total flux cleaned = 0.0340923 Jy
! Component: 2950  -  total flux cleaned = 0.0343653 Jy
! Component: 3000  -  total flux cleaned = 0.0342315 Jy
! Component: 3050  -  total flux cleaned = 0.0342295 Jy
! Component: 3100  -  total flux cleaned = 0.0338327 Jy
! Component: 3150  -  total flux cleaned = 0.0343506 Jy
! Component: 3200  -  total flux cleaned = 0.0344777 Jy
! Component: 3250  -  total flux cleaned = 0.0344781 Jy
! Component: 3300  -  total flux cleaned = 0.0346025 Jy
! Component: 3350  -  total flux cleaned = 0.0349724 Jy
! Component: 3400  -  total flux cleaned = 0.0347254 Jy
! Component: 3450  -  total flux cleaned = 0.0346028 Jy
! Component: 3500  -  total flux cleaned = 0.0341218 Jy
! Component: 3550  -  total flux cleaned = 0.0336468 Jy
! Component: 3600  -  total flux cleaned = 0.0335295 Jy
! Component: 3650  -  total flux cleaned = 0.0331792 Jy
! Component: 3700  -  total flux cleaned = 0.0327184 Jy
! Component: 3750  -  total flux cleaned = 0.0321472 Jy
! Component: 3800  -  total flux cleaned = 0.0321471 Jy
! Component: 3850  -  total flux cleaned = 0.0319218 Jy
! Component: 3900  -  total flux cleaned = 0.0313668 Jy
! Component: 3950  -  total flux cleaned = 0.0312566 Jy
! Component: 4000  -  total flux cleaned = 0.0310381 Jy
! Component: 4050  -  total flux cleaned = 0.0306053 Jy
! Total flux subtracted in 4096 components = 0.0308212 Jy
! Clean residual min=-0.007236 max=0.005982 Jy/beam
! Clean residual mean=-0.000023 rms=0.002275 Jy/beam
! Combined flux in latest and established models = 3.43726 Jy
keep
! Adding 375 model components to the UV plane model.
! The established model now contains 554 components and 3.43726 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /image_prod/ug002_uva//J2225-0457_S_a_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.393 x 16.17 at -16.77 degrees (North through East)
! Clean map  min=-0.019735  max=2.1888 Jy/beam
! Writing clean map to FITS file: /image_prod/ug002_uva//J2225-0457_S_a_map.fits
wmodel /image_prod/ug002_uva//J2225-0457_S_a_map.mod
! Writing 554 model components to file: /image_prod/ug002_uva//J2225-0457_S_a_map.mod
wobs   /image_prod/ug002_uva//J2225-0457_S_a_uvs.fits
! Writing UV FITS file: /image_prod/ug002_uva//J2225-0457_S_a_uvs.fits
wwins  /image_prod/ug002_uva//J2225-0457_S_a_map.win
! wwins: Wrote 3 windows to /image_prod/ug002_uva//J2225-0457_S_a_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.18878 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00218522 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.299512 0.299512 0.599023 1.19805 2.39609 4.79219 9.58438 19.1688 38.3375 76.675
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0065 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.188 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1001.63 
quit
! Quitting program
! Log file /image_prod/ug002_uva//J2225-0457_S_a_dfm.log closed on Thu Mar  5 05:39:47 2020