! Started logfile: /image_prod/ug002_uva//J2225+2118_X_dfm.log on Thu Mar 5 05:39:37 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2225+2118_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2225+2118_X_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.839259 visibilities/baseline/integration-bin. ! Found source: J2225+2118 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 27192 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2225+2118_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.722617Jy sigma=7.777586 ! Fit after self-cal, rms=0.625714Jy sigma=2.947420 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5994 mas, bmaj=1.472 mas, bpa=-8.738 degrees ! Estimated noise=1.53172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.819447 Jy ! Component: 100 - total flux cleaned = 1.20383 Jy ! Total flux subtracted in 100 components = 1.20383 Jy ! Clean residual min=-0.070470 max=0.187861 Jy/beam ! Clean residual mean=0.000017 rms=0.014263 Jy/beam ! Combined flux in latest and established models = 1.20383 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.20383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.459023Jy sigma=1.847336 ! Fit after self-cal, rms=0.456995Jy sigma=1.837746 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.216059 Jy ! Component: 100 - total flux cleaned = 0.336244 Jy ! Total flux subtracted in 100 components = 0.336244 Jy ! Clean residual min=-0.044155 max=0.058948 Jy/beam ! Clean residual mean=0.000009 rms=0.007283 Jy/beam ! Combined flux in latest and established models = 1.54008 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 6 components and 1.54008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.250145Jy sigma=0.990422 ! Fit after self-cal, rms=0.249815Jy sigma=0.988491 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0676785 Jy ! Component: 100 - total flux cleaned = 0.106295 Jy ! Total flux subtracted in 100 components = 0.106295 Jy ! Clean residual min=-0.041061 max=0.044953 Jy/beam ! Clean residual mean=0.000007 rms=0.006208 Jy/beam ! Combined flux in latest and established models = 1.64637 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 1.64637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.209609Jy sigma=0.854559 ! Fit after self-cal, rms=0.209609Jy sigma=0.854099 ! Inverting map ! Added new window around map position (-1, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435251 Jy ! Component: 100 - total flux cleaned = 0.0707543 Jy ! Total flux subtracted in 100 components = 0.0707543 Jy ! Clean residual min=-0.040325 max=0.036638 Jy/beam ! Clean residual mean=0.000008 rms=0.005625 Jy/beam ! Combined flux in latest and established models = 1.71713 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 1.71713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.189504Jy sigma=0.789625 ! Fit after self-cal, rms=0.188558Jy sigma=0.784159 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7514 mas, bmaj=1.685 mas, bpa=-8.111 degrees ! Estimated noise=0.908577 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0501126 Jy ! Component: 100 - total flux cleaned = 0.0832273 Jy ! Component: 150 - total flux cleaned = 0.108642 Jy ! Component: 200 - total flux cleaned = 0.128596 Jy ! Total flux subtracted in 200 components = 0.128596 Jy ! Clean residual min=-0.035028 max=0.042551 Jy/beam ! Clean residual mean=0.000040 rms=0.006418 Jy/beam ! Combined flux in latest and established models = 1.84572 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 46 components and 1.84572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165197Jy sigma=0.703825 ! Fit after self-cal, rms=0.163931Jy sigma=0.698238 ! Inverting map ! Added new window around map position (1.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0366562 Jy ! Component: 100 - total flux cleaned = 0.0597911 Jy ! Component: 150 - total flux cleaned = 0.0777677 Jy ! Component: 200 - total flux cleaned = 0.0921286 Jy ! Total flux subtracted in 200 components = 0.0921286 Jy ! Clean residual min=-0.031259 max=0.027579 Jy/beam ! Clean residual mean=0.000026 rms=0.005707 Jy/beam ! Combined flux in latest and established models = 1.93785 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 74 components and 1.93785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.150648Jy sigma=0.652080 ! Fit after self-cal, rms=0.150077Jy sigma=0.649851 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7514 x 1.685 at -8.111 degrees (North through East) ! Clean map min=-0.028936 max=1.1543 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.00 KP 1.07 ! LA 1.01 MK 1.01 NL 1.07 OV 1.05 ! PT 0.91 SC 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.97 KP 1.05 ! LA 1.01 MK 0.99 NL 1.05 OV 1.01 ! PT 0.94 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.98 KP 1.06 ! LA 0.98 MK 1.01 NL 1.06 OV 1.02 ! PT 0.92 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.03 HN 1.02 KP 1.04 ! LA 1.05 MK 1.02 NL 1.02 OV 1.02 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.97 KP 1.04 ! LA 0.99 MK 1.00 NL 1.04 OV 1.03 ! PT 0.90 SC 1.06 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.95 KP 1.05 ! LA 0.97 MK 1.00 NL 1.06 OV 1.04 ! PT 0.89 SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 0.95 KP 1.05 ! LA 0.97 MK 1.08 NL 1.07 OV 0.97 ! PT 0.89 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.97 KP 1.06 ! LA 1.01 MK 0.99 NL 1.05 OV 1.00 ! PT 0.90 SC 1.04 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.01 KP 1.02 ! LA 0.99 MK 0.99 NL 1.03 OV 1.00 ! PT 0.91 SC 1.08 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 0.97 KP 1.04 ! LA 0.98 MK 1.02 NL 1.04 OV 1.03 ! PT 0.91 SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.96 KP 1.04 ! LA 0.99 MK 0.99 NL 1.03 OV 1.01 ! PT 0.93 SC 1.08 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 1.00 KP 1.05 ! LA 0.99 MK 1.03 NL 1.04 OV 1.01 ! PT 0.89 SC 1.05 ! ! ! Fit before self-cal, rms=0.150077Jy sigma=0.649851 ! Fit after self-cal, rms=0.116492Jy sigma=0.521896 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7566 mas, bmaj=1.696 mas, bpa=-8.446 degrees ! Estimated noise=0.91386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, -6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252038 Jy ! Component: 100 - total flux cleaned = 0.0305129 Jy ! Component: 150 - total flux cleaned = 0.0294785 Jy ! Component: 200 - total flux cleaned = 0.0290128 Jy ! Total flux subtracted in 200 components = 0.0290128 Jy ! Clean residual min=-0.017169 max=0.018053 Jy/beam ! Clean residual mean=-0.000006 rms=0.003819 Jy/beam ! Combined flux in latest and established models = 1.96686 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 1.96686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108417Jy sigma=0.489134 ! Fit after self-cal, rms=0.107912Jy sigma=0.486886 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107912Jy sigma=0.486886 ! Fit after self-cal, rms=0.079474Jy sigma=0.367149 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7557 mas, bmaj=1.687 mas, bpa=-8.273 degrees ! Estimated noise=0.913964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00214364 Jy ! Component: 100 - total flux cleaned = -0.00179271 Jy ! Component: 150 - total flux cleaned = -0.002667 Jy ! Component: 200 - total flux cleaned = -0.00338315 Jy ! Total flux subtracted in 200 components = -0.00338315 Jy ! Clean residual min=-0.008013 max=0.008537 Jy/beam ! Clean residual mean=-0.000008 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 1.96348 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 1.96348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076767Jy sigma=0.353837 ! Fit after self-cal, rms=0.076636Jy sigma=0.353168 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459508 Jy ! Component: 100 - total flux cleaned = 0.00592254 Jy ! Component: 150 - total flux cleaned = 0.00690983 Jy ! Component: 200 - total flux cleaned = 0.00798037 Jy ! Total flux subtracted in 200 components = 0.00798037 Jy ! Clean residual min=-0.007236 max=0.007488 Jy/beam ! Clean residual mean=-0.000008 rms=0.001592 Jy/beam ! Combined flux in latest and established models = 1.97146 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 129 components and 1.97146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075365Jy sigma=0.347142 ! Fit after self-cal, rms=0.075324Jy sigma=0.346921 ! Inverting map ! Added new window around map position (-2.4, -10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452557 Jy ! Component: 100 - total flux cleaned = 0.00660505 Jy ! Component: 150 - total flux cleaned = 0.0083368 Jy ! Component: 200 - total flux cleaned = 0.00961704 Jy ! Total flux subtracted in 200 components = 0.00961704 Jy ! Clean residual min=-0.006868 max=0.006812 Jy/beam ! Clean residual mean=-0.000008 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 1.98108 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 142 components and 1.98108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074320Jy sigma=0.342210 ! Fit after self-cal, rms=0.074275Jy sigma=0.342053 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074275Jy sigma=0.342053 ! Fit after self-cal, rms=0.073293Jy sigma=0.337466 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7545 mas, bmaj=1.687 mas, bpa=-8.299 degrees ! Estimated noise=0.91267 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00278511 Jy ! Component: 100 - total flux cleaned = -0.00302054 Jy ! Component: 150 - total flux cleaned = -0.00372138 Jy ! Component: 200 - total flux cleaned = -0.00356811 Jy ! Total flux subtracted in 200 components = -0.00356811 Jy ! Clean residual min=-0.005850 max=0.006160 Jy/beam ! Clean residual mean=-0.000006 rms=0.001299 Jy/beam ! Combined flux in latest and established models = 1.97751 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 156 components and 1.97751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.072188Jy sigma=0.332420 ! Fit after self-cal, rms=0.072175Jy sigma=0.332319 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.6, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344287 Jy ! Component: 100 - total flux cleaned = 0.00313567 Jy ! Component: 150 - total flux cleaned = 0.00270682 Jy ! Component: 200 - total flux cleaned = 0.00257065 Jy ! Total flux subtracted in 200 components = 0.00257065 Jy ! Clean residual min=-0.005729 max=0.005538 Jy/beam ! Clean residual mean=-0.000006 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 1.98008 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 176 components and 1.98008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071459Jy sigma=0.329082 ! Fit after self-cal, rms=0.071431Jy sigma=0.328966 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.071431Jy sigma=0.328966 ! Fit after self-cal, rms=0.071220Jy sigma=0.327755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.909 mas, bmaj=2.537 mas, bpa=-6.323 degrees ! Estimated noise=1.47369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00265741 Jy ! Component: 100 - total flux cleaned = -0.00356774 Jy ! Component: 150 - total flux cleaned = -0.0032427 Jy ! Component: 200 - total flux cleaned = -0.00294518 Jy ! Total flux subtracted in 200 components = -0.00294518 Jy ! Clean residual min=-0.008980 max=0.007525 Jy/beam ! Clean residual mean=-0.000016 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 1.97714 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 199 components and 1.97714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070544Jy sigma=0.326304 ! Fit after self-cal, rms=0.070526Jy sigma=0.326211 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102689 Jy ! Component: 100 - total flux cleaned = 0.00154891 Jy ! Component: 150 - total flux cleaned = 0.00191081 Jy ! Component: 200 - total flux cleaned = 0.00236257 Jy ! Total flux subtracted in 200 components = 0.00236257 Jy ! Clean residual min=-0.008397 max=0.007259 Jy/beam ! Clean residual mean=-0.000015 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 1.9795 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 214 components and 1.9795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070272Jy sigma=0.325558 ! Fit after self-cal, rms=0.070272Jy sigma=0.325510 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7537 mas, bmaj=1.686 mas, bpa=-8.3 degrees ! Estimated noise=0.911833 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7537 x 1.686 at -8.3 degrees (North through East) ! Clean map min=-0.0077475 max=1.1579 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070272Jy sigma=0.325510 ! Fit after self-cal, rms=0.063113Jy sigma=0.292643 ! Inverting map and beam ! Estimated beam: bmin=0.7537 mas, bmaj=1.685 mas, bpa=-8.26 degrees ! Estimated noise=0.911335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000869624 Jy ! Component: 100 - total flux cleaned = -0.00102958 Jy ! Component: 150 - total flux cleaned = -0.000760399 Jy ! Component: 200 - total flux cleaned = -0.00113019 Jy ! Total flux subtracted in 200 components = -0.00113019 Jy ! Clean residual min=-0.004981 max=0.004642 Jy/beam ! Clean residual mean=-0.000003 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 1.97837 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 230 components and 1.97837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062543Jy sigma=0.289412 ! Fit after self-cal, rms=0.062514Jy sigma=0.289323 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000439921 Jy ! Component: 100 - total flux cleaned = 0.00011216 Jy ! Component: 150 - total flux cleaned = -0.000195859 Jy ! Component: 200 - total flux cleaned = -0.000387206 Jy ! Total flux subtracted in 200 components = -0.000387206 Jy ! Clean residual min=-0.004693 max=0.004378 Jy/beam ! Clean residual mean=-0.000003 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 1.97798 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 238 components and 1.97798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062221Jy sigma=0.287584 ! Fit after self-cal, rms=0.062204Jy sigma=0.287536 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062204Jy sigma=0.287536 ! Fit after self-cal, rms=0.062037Jy sigma=0.287058 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6014 mas, bmaj=1.468 mas, bpa=-8.816 degrees ! Estimated noise=1.53787 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.821653 Jy ! Component: 100 - total flux cleaned = 1.20855 Jy ! Component: 150 - total flux cleaned = 1.42404 Jy ! Component: 200 - total flux cleaned = 1.5451 Jy ! Total flux subtracted in 200 components = 1.5451 Jy ! Clean residual min=-0.030747 max=0.061711 Jy/beam ! Clean residual mean=0.000004 rms=0.005872 Jy/beam ! Combined flux in latest and established models = 1.5451 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.5451 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7533 mas, bmaj=1.685 mas, bpa=-8.266 degrees ! Estimated noise=0.910606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104385 Jy ! Component: 100 - total flux cleaned = 0.163449 Jy ! Component: 150 - total flux cleaned = 0.20171 Jy ! Component: 200 - total flux cleaned = 0.229456 Jy ! Total flux subtracted in 200 components = 0.229456 Jy ! Clean residual min=-0.012872 max=0.016131 Jy/beam ! Clean residual mean=0.000016 rms=0.002794 Jy/beam ! Combined flux in latest and established models = 1.77456 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 31 components and 1.77456 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218618 Jy ! Component: 100 - total flux cleaned = 0.040237 Jy ! Component: 150 - total flux cleaned = 0.056139 Jy ! Component: 200 - total flux cleaned = 0.070063 Jy ! Total flux subtracted in 200 components = 0.070063 Jy ! Clean residual min=-0.009504 max=0.009759 Jy/beam ! Clean residual mean=0.000008 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 1.84462 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 63 components and 1.84462 Jy ! Inverting map ! Added new window around map position (2.8, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124133 Jy ! Component: 100 - total flux cleaned = 0.0233362 Jy ! Component: 150 - total flux cleaned = 0.033084 Jy ! Component: 200 - total flux cleaned = 0.0418141 Jy ! Total flux subtracted in 200 components = 0.0418141 Jy ! Clean residual min=-0.007381 max=0.007081 Jy/beam ! Clean residual mean=0.000005 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 1.88643 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 92 components and 1.88643 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.909 mas, bmaj=2.536 mas, bpa=-6.403 degrees ! Estimated noise=1.47326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167797 Jy ! Component: 100 - total flux cleaned = 0.0294883 Jy ! Component: 150 - total flux cleaned = 0.039784 Jy ! Component: 200 - total flux cleaned = 0.0482322 Jy ! Total flux subtracted in 200 components = 0.0482322 Jy ! Clean residual min=-0.008389 max=0.008608 Jy/beam ! Clean residual mean=0.000003 rms=0.002229 Jy/beam ! Combined flux in latest and established models = 1.93467 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00596342 Jy ! Component: 100 - total flux cleaned = 0.0109048 Jy ! Component: 150 - total flux cleaned = 0.0152726 Jy ! Component: 200 - total flux cleaned = 0.0191457 Jy ! Total flux subtracted in 200 components = 0.0191457 Jy ! Clean residual min=-0.007324 max=0.007586 Jy/beam ! Clean residual mean=0.000001 rms=0.001910 Jy/beam ! Combined flux in latest and established models = 1.95381 Jy ! Adding 119 model components to the UV plane model. ! The established model now contains 197 components and 1.95381 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7533 mas, bmaj=1.685 mas, bpa=-8.266 degrees ! Estimated noise=0.910606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456324 Jy ! Component: 100 - total flux cleaned = 0.00476782 Jy ! Component: 150 - total flux cleaned = 0.00561818 Jy ! Component: 200 - total flux cleaned = 0.00686878 Jy ! Total flux subtracted in 200 components = 0.00686878 Jy ! Clean residual min=-0.005802 max=0.004615 Jy/beam ! Clean residual mean=-0.000000 rms=0.001024 Jy/beam ! Combined flux in latest and established models = 1.96068 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 225 components and 1.96068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062600Jy sigma=0.292464 ! Fit after self-cal, rms=0.062374Jy sigma=0.291375 wmodel J2225+2118_X_map.mod ! Writing 225 model components to file: J2225+2118_X_map.mod wobs J2225+2118_X_uvs.fits ! Writing UV FITS file: J2225+2118_X_uvs.fits wwins J2225+2118_X_map.win ! wwins: Wrote 9 windows to J2225+2118_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00268278 Jy ! Component: 100 - total flux cleaned = -0.004618 Jy ! Component: 150 - total flux cleaned = -0.00589893 Jy ! Component: 200 - total flux cleaned = -0.00673093 Jy ! Component: 250 - total flux cleaned = -0.00746062 Jy ! Component: 300 - total flux cleaned = -0.00788374 Jy ! Component: 350 - total flux cleaned = -0.00836466 Jy ! Component: 400 - total flux cleaned = -0.00889882 Jy ! Component: 450 - total flux cleaned = -0.00928997 Jy ! Component: 500 - total flux cleaned = -0.00980158 Jy ! Component: 550 - total flux cleaned = -0.0103008 Jy ! Component: 600 - total flux cleaned = -0.0107893 Jy ! Component: 650 - total flux cleaned = -0.0113265 Jy ! Component: 700 - total flux cleaned = -0.0117355 Jy ! Component: 750 - total flux cleaned = -0.0121384 Jy ! Component: 800 - total flux cleaned = -0.012701 Jy ! Component: 850 - total flux cleaned = -0.0129774 Jy ! Component: 900 - total flux cleaned = -0.0133578 Jy ! Component: 950 - total flux cleaned = -0.0136251 Jy ! Component: 1000 - total flux cleaned = -0.0140974 Jy ! Component: 1050 - total flux cleaned = -0.0144068 Jy ! Component: 1100 - total flux cleaned = -0.0147115 Jy ! Component: 1150 - total flux cleaned = -0.0149123 Jy ! Component: 1200 - total flux cleaned = -0.0153076 Jy ! Component: 1250 - total flux cleaned = -0.0155507 Jy ! Component: 1300 - total flux cleaned = -0.015838 Jy ! Component: 1350 - total flux cleaned = -0.0162138 Jy ! Component: 1400 - total flux cleaned = -0.0162614 Jy ! Component: 1450 - total flux cleaned = -0.0165814 Jy ! Component: 1500 - total flux cleaned = -0.0165815 Jy ! Component: 1550 - total flux cleaned = -0.0168936 Jy ! Component: 1600 - total flux cleaned = -0.0170691 Jy ! Component: 1650 - total flux cleaned = -0.0173714 Jy ! Component: 1700 - total flux cleaned = -0.0174564 Jy ! Component: 1750 - total flux cleaned = -0.0177507 Jy ! Component: 1800 - total flux cleaned = -0.0177917 Jy ! Component: 1850 - total flux cleaned = -0.0180383 Jy ! Component: 1900 - total flux cleaned = -0.0182409 Jy ! Component: 1950 - total flux cleaned = -0.0184803 Jy ! Component: 2000 - total flux cleaned = -0.0185209 Jy ! Component: 2050 - total flux cleaned = -0.0187555 Jy ! Component: 2100 - total flux cleaned = -0.0189481 Jy ! Component: 2150 - total flux cleaned = -0.0191769 Jy ! Component: 2200 - total flux cleaned = -0.0192139 Jy ! Component: 2250 - total flux cleaned = -0.0192139 Jy ! Component: 2300 - total flux cleaned = -0.0193602 Jy ! Component: 2350 - total flux cleaned = -0.0194329 Jy ! Component: 2400 - total flux cleaned = -0.0194685 Jy ! Component: 2450 - total flux cleaned = -0.0196107 Jy ! Component: 2500 - total flux cleaned = -0.0195403 Jy ! Component: 2550 - total flux cleaned = -0.0196102 Jy ! Component: 2600 - total flux cleaned = -0.0199195 Jy ! Component: 2650 - total flux cleaned = -0.0200551 Jy ! Component: 2700 - total flux cleaned = -0.0199876 Jy ! Component: 2750 - total flux cleaned = -0.020054 Jy ! Component: 2800 - total flux cleaned = -0.0201863 Jy ! Component: 2850 - total flux cleaned = -0.0201542 Jy ! Component: 2900 - total flux cleaned = -0.0203158 Jy ! Component: 2950 - total flux cleaned = -0.0205074 Jy ! Component: 3000 - total flux cleaned = -0.0205078 Jy ! Component: 3050 - total flux cleaned = -0.0206642 Jy ! Component: 3100 - total flux cleaned = -0.0207882 Jy ! Component: 3150 - total flux cleaned = -0.0207272 Jy ! Component: 3200 - total flux cleaned = -0.0208184 Jy ! Component: 3250 - total flux cleaned = -0.0209692 Jy ! Component: 3300 - total flux cleaned = -0.0209098 Jy ! Component: 3350 - total flux cleaned = -0.0209695 Jy ! Component: 3400 - total flux cleaned = -0.0211151 Jy ! Component: 3450 - total flux cleaned = -0.0211155 Jy ! Component: 3500 - total flux cleaned = -0.0213148 Jy ! Component: 3550 - total flux cleaned = -0.021371 Jy ! Component: 3600 - total flux cleaned = -0.0213989 Jy ! Component: 3650 - total flux cleaned = -0.0213992 Jy ! Component: 3700 - total flux cleaned = -0.0215919 Jy ! Component: 3750 - total flux cleaned = -0.0215917 Jy ! Component: 3800 - total flux cleaned = -0.0217263 Jy ! Component: 3850 - total flux cleaned = -0.0216727 Jy ! Component: 3900 - total flux cleaned = -0.0217257 Jy ! Component: 3950 - total flux cleaned = -0.0218048 Jy ! Component: 4000 - total flux cleaned = -0.0218306 Jy ! Component: 4050 - total flux cleaned = -0.0219593 Jy ! Total flux subtracted in 4096 components = -0.0219846 Jy ! Clean residual min=-0.001298 max=0.001425 Jy/beam ! Clean residual mean=0.000000 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 1.9387 Jy keep ! Adding 313 model components to the UV plane model. ! The established model now contains 536 components and 1.9387 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2225+2118_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7533 x 1.685 at -8.266 degrees (North through East) ! Clean map min=-0.0035825 max=1.1591 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2225+2118_X_map.fits wmodel /image_prod/ug002_uva//J2225+2118_X_map.mod ! Writing 536 model components to file: /image_prod/ug002_uva//J2225+2118_X_map.mod wobs /image_prod/ug002_uva//J2225+2118_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2225+2118_X_uvs.fits wwins /image_prod/ug002_uva//J2225+2118_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J2225+2118_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.1591 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000429851 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.111255 0.111255 0.22251 0.44502 0.890039 1.78008 3.56016 7.12031 14.2406 28.4813 56.9625 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.159 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2696.51 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2225+2118_X_dfm.log closed on Thu Mar 5 05:39:43 2020