! Started logfile: /image_prod/ug002_uva//J2223+6249_X_dfm.log on Thu Mar 5 05:38:44 2020 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /image_prod/ug002_uva//J2223+6249_X_uva.fits ! Reading UV FITS file: /image_prod/ug002_uva//J2223+6249_X_uva.fits ! AN table 1: 30 integrations on 28 of 28 possible baselines. ! AN table 2: 90 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.982843 visibilities/baseline/integration-bin. ! Found source: J2223+6249 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 48120 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2223+6249_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 1 telescope corrections were flagged in sub-array 1. ! A total of 8 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.011115Jy sigma=9.184831 ! Fit after self-cal, rms=0.862839Jy sigma=7.773050 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7187 mas, bmaj=0.8772 mas, bpa=-8.276 degrees ! Estimated noise=0.873153 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0837987 Jy ! Component: 100 - total flux cleaned = 0.120746 Jy ! Total flux subtracted in 100 components = 0.120746 Jy ! Clean residual min=-0.006433 max=0.019567 Jy/beam ! Clean residual mean=0.000043 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 0.120746 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.120746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085694Jy sigma=0.783777 ! Fit after self-cal, rms=0.085632Jy sigma=0.783140 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246404 Jy ! Component: 100 - total flux cleaned = 0.041397 Jy ! Total flux subtracted in 100 components = 0.041397 Jy ! Clean residual min=-0.004311 max=0.011856 Jy/beam ! Clean residual mean=0.000031 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.162143 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.162144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069357Jy sigma=0.617842 ! Fit after self-cal, rms=0.069318Jy sigma=0.617433 ! Inverting map ! Added new window around map position (0.2, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133325 Jy ! Component: 100 - total flux cleaned = 0.0234195 Jy ! Total flux subtracted in 100 components = 0.0234195 Jy ! Clean residual min=-0.003916 max=0.006339 Jy/beam ! Clean residual mean=0.000024 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.185563 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 34 components and 0.185563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062894Jy sigma=0.550654 ! Fit after self-cal, rms=0.062755Jy sigma=0.549710 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00868679 Jy ! Component: 100 - total flux cleaned = 0.0155179 Jy ! Total flux subtracted in 100 components = 0.0155179 Jy ! Clean residual min=-0.003548 max=0.004874 Jy/beam ! Clean residual mean=0.000020 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.201081 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.201081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059556Jy sigma=0.516068 ! Fit after self-cal, rms=0.059496Jy sigma=0.515663 ! Inverting map ! Added new window around map position (-0.6, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621579 Jy ! Component: 100 - total flux cleaned = 0.0111809 Jy ! Total flux subtracted in 100 components = 0.0111809 Jy ! Clean residual min=-0.003255 max=0.003750 Jy/beam ! Clean residual mean=0.000016 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.212262 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 51 components and 0.212262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057788Jy sigma=0.497533 ! Fit after self-cal, rms=0.057748Jy sigma=0.497261 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9613 mas, bmaj=1.158 mas, bpa=-5.958 degrees ! Estimated noise=0.360932 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102149 Jy ! Component: 100 - total flux cleaned = 0.0169485 Jy ! Component: 150 - total flux cleaned = 0.0215967 Jy ! Component: 200 - total flux cleaned = 0.0248386 Jy ! Total flux subtracted in 200 components = 0.0248386 Jy ! Clean residual min=-0.002853 max=0.003650 Jy/beam ! Clean residual mean=0.000019 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.2371 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 72 components and 0.2371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055682Jy sigma=0.476096 ! Fit after self-cal, rms=0.055607Jy sigma=0.475411 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9613 x 1.158 at -5.958 degrees (North through East) ! Clean map min=-0.0026458 max=0.13198 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.95 KP 1.07 LA 1.03 ! MK 1.13 NL 1.22 OV 0.90 SC 1.12 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.05 HN 1.03 KP 1.05 ! LA 1.04 MK 1.15 OV 0.93 PT 0.90 ! SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.96 KP 1.05 LA 1.05 ! MK 1.10 NL 1.21 OV 0.92 SC 1.15 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.02 HN 1.01 KP 1.06 ! LA 1.04 MK 1.12 OV 0.93 PT 0.91 ! SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.96 KP 1.06 LA 1.01 ! MK 1.08 NL 1.23 OV 0.91 SC 1.14 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.03 HN 0.99 KP 1.06 ! LA 1.03 MK 1.12 OV 0.92 PT 0.92 ! SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.98 KP 1.06 LA 1.01 ! MK 1.05 NL 1.22 OV 0.93 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 HN 0.98 KP 1.05 ! LA 1.01 MK 1.11 OV 0.93 PT 0.90 ! SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.96 KP 1.04 LA 1.00 ! MK 1.09 NL 1.23 OV 0.91 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 HN 1.00 KP 1.04 ! LA 1.01 MK 1.09 OV 0.94 PT 0.88 ! SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.94 KP 1.05 LA 1.02 ! MK 1.09 NL 1.22 OV 0.91 SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.03 HN 1.00 KP 1.03 ! LA 1.02 MK 1.07 OV 0.93 PT 0.89 ! SC 1.07 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.92 KP 1.07 LA 1.01 ! MK 1.08 NL 1.16 OV 0.89 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 HN 0.99 KP 1.03 ! LA 1.03 MK 1.07 OV 0.92 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.90 KP 1.02 LA 1.00 ! MK 1.06 NL 1.21 OV 0.89 SC 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.04 HN 0.97 KP 1.03 ! LA 1.02 MK 1.06 OV 0.91 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.92 KP 1.06 LA 0.96 ! MK 0.97 NL 1.24 OV 0.92 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 HN 0.97 KP 1.05 ! LA 0.98 MK 1.03 OV 0.93 PT 0.89 ! SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 HN 0.92 KP 0.99 LA 1.01 ! MK 1.07 NL 1.23 OV 0.89 SC 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.03 HN 0.95 KP 1.02 ! LA 1.03 MK 1.03 OV 0.93 PT 0.87 ! SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 0.98 KP 1.02 LA 1.02 ! MK 0.97 NL 1.20 OV 0.89 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 HN 0.97 KP 1.04 ! LA 1.03 MK 1.00 OV 0.92 PT 0.91 ! SC 0.91 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 HN 0.96 KP 1.06 LA 0.99 ! MK 0.97 NL 1.22 OV 0.88 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 0.95 KP 1.04 ! LA 1.01 MK 1.01 OV 0.90 PT 0.90 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.055607Jy sigma=0.475411 ! Fit after self-cal, rms=0.053898Jy sigma=0.457121 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9731 mas, bmaj=1.175 mas, bpa=-4.336 degrees ! Estimated noise=0.362841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117957 Jy ! Component: 100 - total flux cleaned = 0.0015397 Jy ! Component: 150 - total flux cleaned = 0.00176538 Jy ! Component: 200 - total flux cleaned = 0.00190563 Jy ! Total flux subtracted in 200 components = 0.00190563 Jy ! Clean residual min=-0.000895 max=0.001086 Jy/beam ! Clean residual mean=0.000003 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.239006 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.239006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053851Jy sigma=0.456667 ! Fit after self-cal, rms=0.053862Jy sigma=0.456511 ! Inverting map ! Added new window around map position (38.4, 10.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000885129 Jy ! Component: 100 - total flux cleaned = 0.000978656 Jy ! Component: 150 - total flux cleaned = 0.00109994 Jy ! Component: 200 - total flux cleaned = 0.00115399 Jy ! Total flux subtracted in 200 components = 0.00115399 Jy ! Clean residual min=-0.000875 max=0.000890 Jy/beam ! Clean residual mean=0.000002 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.24016 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 100 components and 0.24016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053838Jy sigma=0.456308 ! Fit after self-cal, rms=0.053836Jy sigma=0.456286 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053836Jy sigma=0.456286 ! Fit after self-cal, rms=0.053646Jy sigma=0.455504 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9707 mas, bmaj=1.172 mas, bpa=-4.491 degrees ! Estimated noise=0.362063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000635659 Jy ! Component: 100 - total flux cleaned = 0.000961251 Jy ! Component: 150 - total flux cleaned = 0.00103701 Jy ! Component: 200 - total flux cleaned = 0.00106405 Jy ! Total flux subtracted in 200 components = 0.00106405 Jy ! Clean residual min=-0.000711 max=0.000748 Jy/beam ! Clean residual mean=0.000002 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.241224 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 106 components and 0.241224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053635Jy sigma=0.455407 ! Fit after self-cal, rms=0.053635Jy sigma=0.455394 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000257429 Jy ! Component: 100 - total flux cleaned = 0.000310324 Jy ! Component: 150 - total flux cleaned = 0.000310391 Jy ! Component: 200 - total flux cleaned = 0.000322017 Jy ! Total flux subtracted in 200 components = 0.000322017 Jy ! Clean residual min=-0.000720 max=0.000747 Jy/beam ! Clean residual mean=0.000002 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.241546 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 114 components and 0.241546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053629Jy sigma=0.455347 ! Fit after self-cal, rms=0.053629Jy sigma=0.455344 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053629Jy sigma=0.455344 ! Fit after self-cal, rms=0.053542Jy sigma=0.455328 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9698 mas, bmaj=1.171 mas, bpa=-4.538 degrees ! Estimated noise=0.361693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341587 Jy ! Component: 100 - total flux cleaned = 0.000504005 Jy ! Component: 150 - total flux cleaned = 0.000525989 Jy ! Component: 200 - total flux cleaned = 0.00054674 Jy ! Total flux subtracted in 200 components = 0.00054674 Jy ! Clean residual min=-0.000706 max=0.000727 Jy/beam ! Clean residual mean=0.000002 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.242093 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 115 components and 0.242093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053537Jy sigma=0.455284 ! Fit after self-cal, rms=0.053536Jy sigma=0.455279 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186092 Jy ! Component: 100 - total flux cleaned = 0.000216873 Jy ! Component: 150 - total flux cleaned = 0.000207283 Jy ! Component: 200 - total flux cleaned = 0.00020747 Jy ! Total flux subtracted in 200 components = 0.00020747 Jy ! Clean residual min=-0.000707 max=0.000724 Jy/beam ! Clean residual mean=0.000002 rms=0.000173 Jy/beam ! Combined flux in latest and established models = 0.2423 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 120 components and 0.2423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053532Jy sigma=0.455250 ! Fit after self-cal, rms=0.053532Jy sigma=0.455248 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053532Jy sigma=0.455248 ! Fit after self-cal, rms=0.053456Jy sigma=0.455240 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=2.612 mas, bpa=66.35 degrees ! Estimated noise=0.475612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282038 Jy ! Component: 100 - total flux cleaned = 0.000330002 Jy ! Component: 150 - total flux cleaned = 0.000356964 Jy ! Component: 200 - total flux cleaned = 0.00038044 Jy ! Total flux subtracted in 200 components = 0.00038044 Jy ! Clean residual min=-0.000770 max=0.000953 Jy/beam ! Clean residual mean=0.000005 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.242681 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 147 components and 0.242681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053455Jy sigma=0.455228 ! Fit after self-cal, rms=0.053454Jy sigma=0.455228 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13, 18.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910746 Jy ! Component: 100 - total flux cleaned = 0.00135717 Jy ! Component: 150 - total flux cleaned = 0.00158687 Jy ! Component: 200 - total flux cleaned = 0.00182949 Jy ! Total flux subtracted in 200 components = 0.00182949 Jy ! Clean residual min=-0.000663 max=0.000918 Jy/beam ! Clean residual mean=0.000004 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.24451 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 178 components and 0.24451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053445Jy sigma=0.455136 ! Fit after self-cal, rms=0.053444Jy sigma=0.455129 ! Inverting map ! Added new window around map position (-38, 14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828088 Jy ! Component: 100 - total flux cleaned = 0.00101951 Jy ! Component: 150 - total flux cleaned = 0.00112943 Jy ! Component: 200 - total flux cleaned = 0.00119936 Jy ! Total flux subtracted in 200 components = 0.00119936 Jy ! Clean residual min=-0.000625 max=0.000680 Jy/beam ! Clean residual mean=0.000001 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.24571 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 210 components and 0.24571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053434Jy sigma=0.455038 ! Fit after self-cal, rms=0.053433Jy sigma=0.455032 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9692 mas, bmaj=1.17 mas, bpa=-4.487 degrees ! Estimated noise=0.361371 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9692 x 1.17 at -4.487 degrees (North through East) ! Clean map min=-0.00056201 max=0.13183 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7247 mas, bmaj=0.8837 mas, bpa=-6.243 degrees ! Estimated noise=0.883412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0843089 Jy ! Component: 100 - total flux cleaned = 0.121597 Jy ! Component: 150 - total flux cleaned = 0.146074 Jy ! Component: 200 - total flux cleaned = 0.163732 Jy ! Total flux subtracted in 200 components = 0.163732 Jy ! Clean residual min=-0.003823 max=0.010137 Jy/beam ! Clean residual mean=0.000027 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.163732 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.163732 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9692 mas, bmaj=1.17 mas, bpa=-4.487 degrees ! Estimated noise=0.361371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0269946 Jy ! Component: 100 - total flux cleaned = 0.0431559 Jy ! Component: 150 - total flux cleaned = 0.053577 Jy ! Component: 200 - total flux cleaned = 0.060536 Jy ! Total flux subtracted in 200 components = 0.060536 Jy ! Clean residual min=-0.001575 max=0.004134 Jy/beam ! Clean residual mean=0.000014 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.224268 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 64 components and 0.224268 Jy ! Inverting map ! Added new window around map position (0, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489355 Jy ! Component: 100 - total flux cleaned = 0.00832659 Jy ! Component: 150 - total flux cleaned = 0.0108212 Jy ! Component: 200 - total flux cleaned = 0.0127221 Jy ! Total flux subtracted in 200 components = 0.0127221 Jy ! Clean residual min=-0.000919 max=0.001224 Jy/beam ! Clean residual mean=0.000006 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.23699 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 93 components and 0.23699 Jy ! Inverting map ! Added new window around map position (0.6, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014934 Jy ! Component: 100 - total flux cleaned = 0.00267869 Jy ! Component: 150 - total flux cleaned = 0.00359778 Jy ! Component: 200 - total flux cleaned = 0.00436064 Jy ! Total flux subtracted in 200 components = 0.00436064 Jy ! Clean residual min=-0.000808 max=0.000757 Jy/beam ! Clean residual mean=0.000003 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.241351 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 117 components and 0.241351 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=2.612 mas, bpa=66.35 degrees ! Estimated noise=0.475612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110025 Jy ! Component: 100 - total flux cleaned = 0.00191051 Jy ! Component: 150 - total flux cleaned = 0.00258532 Jy ! Component: 200 - total flux cleaned = 0.00298507 Jy ! Total flux subtracted in 200 components = 0.00298507 Jy ! Clean residual min=-0.000754 max=0.000745 Jy/beam ! Clean residual mean=0.000003 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.244336 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356237 Jy ! Component: 100 - total flux cleaned = 0.000621959 Jy ! Component: 150 - total flux cleaned = 0.000829996 Jy ! Component: 200 - total flux cleaned = 0.000974592 Jy ! Total flux subtracted in 200 components = 0.000974592 Jy ! Clean residual min=-0.000671 max=0.000717 Jy/beam ! Clean residual mean=0.000002 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.24531 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 188 components and 0.24531 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9692 mas, bmaj=1.17 mas, bpa=-4.487 degrees ! Estimated noise=0.361371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153804 Jy ! Component: 100 - total flux cleaned = -0.000106815 Jy ! Component: 150 - total flux cleaned = -5.96863e-05 Jy ! Component: 200 - total flux cleaned = 7.13666e-05 Jy ! Total flux subtracted in 200 components = 7.13666e-05 Jy ! Clean residual min=-0.000704 max=0.000665 Jy/beam ! Clean residual mean=0.000001 rms=0.000161 Jy/beam ! Combined flux in latest and established models = 0.245382 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 207 components and 0.245382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053454Jy sigma=0.455198 ! Fit after self-cal, rms=0.053451Jy sigma=0.455181 wmodel J2223+6249_X_map.mod ! Writing 207 model components to file: J2223+6249_X_map.mod wobs J2223+6249_X_uvs.fits ! Writing UV FITS file: J2223+6249_X_uvs.fits wwins J2223+6249_X_map.win ! wwins: Wrote 9 windows to J2223+6249_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171439 Jy ! Component: 100 - total flux cleaned = -0.000195541 Jy ! Component: 150 - total flux cleaned = -0.000206518 Jy ! Component: 200 - total flux cleaned = -0.000195024 Jy ! Component: 250 - total flux cleaned = -0.000205876 Jy ! Component: 300 - total flux cleaned = -0.000184269 Jy ! Component: 350 - total flux cleaned = -0.000205381 Jy ! Component: 400 - total flux cleaned = -0.000163561 Jy ! Component: 450 - total flux cleaned = -0.000215348 Jy ! Component: 500 - total flux cleaned = -0.000225348 Jy ! Component: 550 - total flux cleaned = -0.000205011 Jy ! Component: 600 - total flux cleaned = -0.000214978 Jy ! Component: 650 - total flux cleaned = -0.000214973 Jy ! Component: 700 - total flux cleaned = -0.000214929 Jy ! Component: 750 - total flux cleaned = -0.000234457 Jy ! Component: 800 - total flux cleaned = -0.000253602 Jy ! Component: 850 - total flux cleaned = -0.00025367 Jy ! Component: 900 - total flux cleaned = -0.000291342 Jy ! Component: 950 - total flux cleaned = -0.000281821 Jy ! Component: 1000 - total flux cleaned = -0.000291104 Jy ! Component: 1050 - total flux cleaned = -0.000291068 Jy ! Component: 1100 - total flux cleaned = -0.000300225 Jy ! Component: 1150 - total flux cleaned = -0.000291155 Jy ! Component: 1200 - total flux cleaned = -0.000264337 Jy ! Component: 1250 - total flux cleaned = -0.000282218 Jy ! Component: 1300 - total flux cleaned = -0.000308639 Jy ! Component: 1350 - total flux cleaned = -0.000273696 Jy ! Component: 1400 - total flux cleaned = -0.000299828 Jy ! Component: 1450 - total flux cleaned = -0.000308404 Jy ! Component: 1500 - total flux cleaned = -0.00028267 Jy ! Component: 1550 - total flux cleaned = -0.000291221 Jy ! Component: 1600 - total flux cleaned = -0.000316572 Jy ! Component: 1650 - total flux cleaned = -0.000299824 Jy ! Component: 1700 - total flux cleaned = -0.000308121 Jy ! Component: 1750 - total flux cleaned = -0.000324782 Jy ! Component: 1800 - total flux cleaned = -0.000332973 Jy ! Component: 1850 - total flux cleaned = -0.000324668 Jy ! Component: 1900 - total flux cleaned = -0.000308336 Jy ! Component: 1950 - total flux cleaned = -0.000340687 Jy ! Component: 2000 - total flux cleaned = -0.000324541 Jy ! Component: 2050 - total flux cleaned = -0.000340561 Jy ! Component: 2100 - total flux cleaned = -0.0003406 Jy ! Component: 2150 - total flux cleaned = -0.000372326 Jy ! Component: 2200 - total flux cleaned = -0.000411712 Jy ! Component: 2250 - total flux cleaned = -0.000388272 Jy ! Component: 2300 - total flux cleaned = -0.000419393 Jy ! Component: 2350 - total flux cleaned = -0.000403923 Jy ! Component: 2400 - total flux cleaned = -0.000419315 Jy ! Component: 2450 - total flux cleaned = -0.000426952 Jy ! Component: 2500 - total flux cleaned = -0.000396503 Jy ! Component: 2550 - total flux cleaned = -0.000426801 Jy ! Component: 2600 - total flux cleaned = -0.000456962 Jy ! Component: 2650 - total flux cleaned = -0.000457001 Jy ! Component: 2700 - total flux cleaned = -0.000494327 Jy ! Component: 2750 - total flux cleaned = -0.000464611 Jy ! Component: 2800 - total flux cleaned = -0.000464638 Jy ! Component: 2850 - total flux cleaned = -0.000464661 Jy ! Component: 2900 - total flux cleaned = -0.00050868 Jy ! Component: 2950 - total flux cleaned = -0.000516042 Jy ! Component: 3000 - total flux cleaned = -0.000559669 Jy ! Component: 3050 - total flux cleaned = -0.00057414 Jy ! Component: 3100 - total flux cleaned = -0.000602952 Jy ! Component: 3150 - total flux cleaned = -0.000617337 Jy ! Component: 3200 - total flux cleaned = -0.000653108 Jy ! Component: 3250 - total flux cleaned = -0.000660183 Jy ! Component: 3300 - total flux cleaned = -0.000695655 Jy ! Component: 3350 - total flux cleaned = -0.000695641 Jy ! Component: 3400 - total flux cleaned = -0.000702672 Jy ! Component: 3450 - total flux cleaned = -0.000716721 Jy ! Component: 3500 - total flux cleaned = -0.000744657 Jy ! Component: 3550 - total flux cleaned = -0.00072377 Jy ! Component: 3600 - total flux cleaned = -0.000709947 Jy ! Component: 3650 - total flux cleaned = -0.000758237 Jy ! Component: 3700 - total flux cleaned = -0.000765126 Jy ! Component: 3750 - total flux cleaned = -0.000744607 Jy ! Component: 3800 - total flux cleaned = -0.000758237 Jy ! Component: 3850 - total flux cleaned = -0.000805814 Jy ! Component: 3900 - total flux cleaned = -0.00077875 Jy ! Component: 3950 - total flux cleaned = -0.000765276 Jy ! Component: 4000 - total flux cleaned = -0.000792164 Jy ! Component: 4050 - total flux cleaned = -0.000765383 Jy ! Total flux subtracted in 4096 components = -0.000778758 Jy ! Clean residual min=-0.000450 max=0.000440 Jy/beam ! Clean residual mean=0.000000 rms=0.000111 Jy/beam ! Combined flux in latest and established models = 0.244603 Jy keep ! Adding 321 model components to the UV plane model. ! The established model now contains 528 components and 0.244603 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /image_prod/ug002_uva//J2223+6249_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9692 x 1.17 at -4.487 degrees (North through East) ! Clean map min=-0.00057477 max=0.13236 Jy/beam ! Writing clean map to FITS file: /image_prod/ug002_uva//J2223+6249_X_map.fits wmodel /image_prod/ug002_uva//J2223+6249_X_map.mod ! Writing 528 model components to file: /image_prod/ug002_uva//J2223+6249_X_map.mod wobs /image_prod/ug002_uva//J2223+6249_X_uvs.fits ! Writing UV FITS file: /image_prod/ug002_uva//J2223+6249_X_uvs.fits wwins /image_prod/ug002_uva//J2223+6249_X_map.win ! wwins: Wrote 10 windows to /image_prod/ug002_uva//J2223+6249_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.132359 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000110295 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.249989 0.249989 0.499978 0.999955 1.99991 3.99982 7.99964 15.9993 31.9986 63.9971 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.132 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1200.05 quit ! Quitting program ! Log file /image_prod/ug002_uva//J2223+6249_X_dfm.log closed on Thu Mar 5 05:38:51 2020